Cost/revenue rate E_MOE_DEC, 00000000: unit of measure PDA does not exist

Dear community,
I am still working on SAP PPM FICO & CATS integration.
I can't replicate my cost/revenue rate in the ECC system.
There is the error message : Cost/revenue rate (name of the cost/revenue rate) : unit of measure PDA does not exist
Does someone know what PDA is ?
I customized the units with FTE.
Thank you in advance for your help.
Best,
Cassoké

Hi Cassoke,
Through analysis found that you need to define 'Units of Measurement' PDA which is linked to the capacity unit 'FTE'.
Just check whether you have the PDA unit of measurement in tcode-CUNI or under SPRO-->PPM-->Portfolio Management-->Global Customizing-->Global Settings-->Define Units of Measurement.
Select dimensions 'Time' and click on 'Units of Measurement' and if no PDA entry is there, create an entry(Attached screenshot for your reference).
Hope this helps.
Regards,
Ravi

Similar Messages

  • O4G1 - Unit of measure group does not exist

    Dear all,
    This is error exists in O4H1 : Unit of measure group does not exist.
    I have created the group following by this path: Industry Solution Oil & Gas (Downstream) -> HPM  (Hydrocarbon Product Management) -> Oil- and Gas-Specific Units of Measure and Additional Stockkeeping Units -> Define additional stockkeeping units of measure (Transaction O586).
    But i don't know how to use this UOM group. Pls help!
    Thanks,
    Edited by: Le Vinh Quang on Dec 29, 2010 8:05 AM
    O4H1 --> O4G1

    Hi,
    Maintain in the Material Master data for your material.
    The UoM Group field is on the Oil-specific data tab in MM02.
    BR,
    Barna

  • Measuring point  does not exist

    Hi,
    I am facing problem in pi sheet where in co54 while sending the process msg i am getting the error
    "Measuring point  does not exist"
    "Destination YI16 COCI_MEASUREMENT_DOC_CREATE cannot process the message"
    "Message is not sent to any destination"
    Can any body help....
    Rajsekhar

    Hello
    Check the link below for the info you can gather using the Container Variables.
    Creating Alert Categories 
    http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
    Regards
    Mark

  • How to correct CIF error Base unit of measure does not exist?

    Dear experts,
    I'm trying to cif a location product with base unit of measure KG in R/3 and alternative unit of measure well maintained.
    it gives me a CIF queue saying that
    "Base unit of measure ZXX does not exist (Product 0000000000000XXXXXX has not been created)"
    I do not understand why, the unit ZXX does not exist in the alternative unit of measure for any of the materials managed
    I also checked CUNI table and ZXX is not there neither in R/3 or APO,
    Thanks for your help
    E

    Looks like the Alternate UOM --Zxx is not maintained in APO.
    2 ways to do this:
    (1) program- RSIMPCUST
    Re transfer all your UOM settings from R3 to APO
    (2) Manual Maintenance in APO:
    SPRO>SAP NETWEAVER>GENERAL SETTIGNS>Check UNits of Measurement
    Thanks
    Kumar

  • C project error in cost/revenue rates

    dear plm consultant,
    I am facing problem in c project costing,
    When  i try for calulate costing.
    I get the cost revenue rates screen.but in that screen revenue rates are not comes that field come blank.and cost of the resoure are come negative form.
    e.g. 560- in such fasion cost disply
    I am unbale to trace this error. please help for same .
    piont will be reward for help full answer
    sunil jawalkar
    [email protected]
    Message was edited by:
            sunil jawalkar

    Hi Suny,
    I have the same problem as you, do you help me to understand how fix it?
    Thanks in advance,
    Sara Gil

  • Error to replicate cost/revenue rates

    Hi,
    Error regarding replicate cost/revenue rate .
    We use PLM Dev server and gives RFC R/3 100 Dev and R/3 410 Quality server.
    We use Project suit 4.0 and ecc 6.0 versions
    We are tried to make account integrations between c project and R/3system 
    When we try <b>to replicate cost/revenue rate</b>
    Form PLM Dev to R/3 Dev 410 it works fine (but Quality server is not modifiable)
    So I try to do same PLM Dev to R/3 100 Dev it gives error
    <b>Function Module “DPR_REPLICATE_RATES “Not found</b>
    I check function module in R/3 100 Dev and 410 Quality it is present in the both client.
    But when I check it in PLM Dev 100 it shows function group DPR_CALC does not exits.
    Then what is exact problem? Please help for same, if problem in PLM dev 100 then how it transfer cost /revenue rate to R/3 410  and not for R/3 100 Dev.
    We check RFC CONNECTION IT WORK FINE
    thanx
    <b>sunil jawalkar
    [email protected]
    9890960640</b>
    sunil jawalkar

    Hi.
    This is difficult to answer without seeing the system. I just can guess:
    - An easy thing would be that the function module just isn't activated. You go to transaction SE37 in PROD and look it up.
    - If you cannot find the function module it might have been lost in a transport. You check the object catalog entry of the function module: R3TR FUGR DPR_CALC first. You go to transaction SE03 and check in DEV and Q if the object is in a request or task and look up its status there.
    By the way: The function module is part of cProjects. Has it been implemented in your PROD already?
    Best regards.
    Jens Schmid

  • Cost / Revenue rate for resources - cProjects 4.0

    Having done the required accounting configurations, I get to see the the cost and revenue rate at the cProjects front end, defined (configured) in the system. I am also able to overwrite the system configured values and have my own. However, when I save, the system throws an error message - 'Cost / Revenue rate not defined for role / resource.'.
    Where could I be going wrong??

    Hi
       Swayam,
    please check the following setting in configuration .
    collabration project-
          --Connection to External System
              --Account Integration
                --Define Cost/Revenue rate
                  --Replicate Cost/Revenue rate
                    --Replicate Accounting-Relevant charac.
                      --Make setting in the ERP system
    Do this configuration setting
    This will definetly solve u r problem.

  • Cost/revenue rate

    Hi all,
    I have created 4 nos. cost/revenue rates. While replicating,  they four are having different status than other. Can anyone tell me about this status? where to maintain/change the status?

    Hi Yogesh,
    Please explain your issue in detail.
    Amit
    Edited by: Amit Sawant on Apr 10, 2008 4:24 PM

  • Unit of Measure PCE is not an ISO Code

    Hi MDM Experts,
    We experienced problems in transferring the Catalog item to the shopping cart. The following error message appears:
    "Incomplete items in catalog. Only complete items were transferred "
    I checked SLG1 for the OCI error message and found this log:
    "Unit of measure PCE is not an ISO code. Item will not be transferred"
    I checked table CUNI in both the ERP and SRM server and I found out that PCE is indeed an ISO code. How can I resolve this error? The system is saying that PCE is not an ISO code but the table shows that it is. Is this a bug or something?
    Would appreciate your help. Thanks in advance!
    ADP

    It turned out that in ERP and SRM, ST is the ISO code used for UOM piece. The ISO code in the Data Manager was changed to synchronize the three systems.

  • Unit of measure ST is not defined as a commercial unit

    Hi Experts,
    While doing Punch Out catalogue in the Maintenance Order, i have received the following error "Unit of measure ST is not defined as a commercial unit".
    I have checked in the transaction CUNI, and ensure that the above UoM is maintained.
    This is a standard error message M3 491.
    Any pointers will be appreciated....
    by
    Prabhu

    Hi Prabhu,
    GOTO CUNI
    Check whether Commercial meas.unit field is ticked or not in application Parameters tab.
    If not maintained, maintain here the tick
    Regards,
    Amol

  • Organizational unit 00000000 does not exist; check entries

    Hi Experts,
    While creating the business partner in transaction BBPMAININT the error is
    Organizational unit 00000000 does not exist; check entries
    where do i have to make entry of the organisation unit
    , already i have entered the purchase organisation.
    Thanks

    Hello,
    Can anyone Explain me How can i Create Vendor  EBP using T Code ppoma_bbp.
    I am using Tcode bbpgetvd for for Replicating Vendor Master to mySRM System and it is Having field of
    Organuzational Object for Suppliers 
    Object ID ______
    I have given Object id which is in assigned is ppoma_bbp (Organizational Structure).
    I have Tried to assign Object ID of Organizational unit which is assign with Purchasing Org. and Purchasing Grp.
    Please Help Me anybody.
    Thanks in Advance.

  • Error: In language EN, the internal unit of measure DA is not maintained.

    hi
    i am doing subcontracting operation and when i try to convert the PR into p.o in co02 the system gives this error
    In language EN, the internal unit of measure DA is not maintained.
    how can i solve this error...

    Hi,
    There are couple of things..
    1. PR to PO Creation is not with T.Code: CO02.
    2. It seems you are working on Multi Global environment.
    Ask your Basis Team to do the Language imports for UOM.
    Regards,
    Siva

  • Infotype 2001 Record 00000000           000000000000000000000000000 does not exist Message no. PG225

    Hi,
    I am trying to  create a record in infotype 2001 but getting error
    Record 00000000           000000000000000000000000000 does not exist
    Message no. PG225
    This error not come before.  I have created many records for the last few months.
    Please suggest how to resolve.
    Regards,
    Pathi

    Hi Pathi,
    I guess this is because of Activity Allocation and Cost Assignment. Plz check the Number range assignment:
    PA05 for Number range assignment for additional time data
    PT12 for HR document posting
    Thanks'
    Gautam

  • Actual activity price does not exist for cost center / activity type

    Hi,
    We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
    We have used a customized program and have loaded the data from se38.
    All this HR data will be saved in CAT2
    Later we transfer the time related data into SAP FI/CO using CAT7.
    +When  tested  with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
    For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
    Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
    We have run the price calculation forr the FY 2010.
    Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
    When uploaded employee time sheets before, all the cost were getting claculated and were entering into  the respective cost elements, but now no amounts are being calculated and it is taking Zero.
    When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
    PLease assit
    Regards,
    shilpa

    Hi
    I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
    Regards
    Ajay M

  • Activity Type: cost element does not exist

    Dear All,
    I am working on ERP  configuration for PP module as an academic exercise. I am already through with FI, CO and MM modules.
    I am not able to get through the Activity assignment step in PP module. (Accounting u21D2 Controlling u21D2 Cost Center Accounting u21D2 Master Data u21D2 Activity Type u21D2 Individual Processing u21D2 Create). While creating activity type labor (labor hours), I am getting error "cost element does not exist for aggregated period"
    In CO module I have created primary cost element for "Labor"(Category: primary cost/ cost reducing revenues). Also created secondary cost element for labor (cost element category: Internal activity allocation).
    Can anybody guide me on how to go further?
    regards,
    Supriya

    Dear
    Please revivew the following steps when you are creating a New Acvity type :
    OP51 - Check Settings for formulas
    OP54 - Check formulas for Costing
    Ensure that usage of the parameters are indicated.  Some parameters are appropriate for capacity calculation but not for schedule calculation.  If you like to find out the parameter id, you could use the Search Fld. for Param. pull down button to do so.
    KLH2 - Maintain hierarchy of Activity type group.
    OP19 - Define standard value key
    The purpose of standard value keys is to group together a set of parameters for the purpose of ensuring that the standard values for the parameters are supplied in the operations of the routing.  This is so that the formula (for calculating cost, schedule, and capacity) could have the necessary figures to work with.  Once the parameters are associated with the standard value keys, work centers quoting this standard values will be able to dictate whether or not the parameter values are optional or mandatory entry in the operations of the routing.  The pre-requisite for using this transaction is that the parameters must have been pre-created.
    KA01 - Create Primary Cost Element for the new activities type. Maintain Correct From and To date inline with Activity Type KL01  - Create Activity Type tied to the primary cost element. (the Cost element field)
    KP26  - Change Activity Type/Activity Price Planning - maintain the Variable price
    If the user include the additional activities in their work center, the routing that used the work center will required more time to finished the jobs.
    The operations Start and Finish date will be extended due to the extra time spent on the work center.  The cost of production increases in line with the extra activity which will be reflected in the Factory Output when you do a cost analysis in the production order.   The new activity will have a price attached to it and the moving average price will increase.
    Regards
    JH

Maybe you are looking for

  • Problems with GP Processmodeling

    Hi, I'm trying to implement a Issue-Ticket process with the standard Callable-Objects of the GP Designtime (for excercises). Here is my hirarchy: B3: Ticketcontrol (alternatives) +-- A 3.1: Choose (decision action) --- B5: solve ticket (sequential) -

  • Bootcamp goes blank screen after startup sign.

    I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

  • %TYPE in create table

    Is it possible to use %TYPE while defining table column datatype? Does Oracle support userdefined datatypes which can be used in Table-Column definition as well as stored procedure variables?

  • Type of termination: RABAX_STATE

    hi everyone, im facing a problem while executing a query in the web productive system... it gives this message: 500 SAP Internal Server Error Error message: Exception condition "X_MESSAGE" raised. ( type of termination: RABAX_STATE ) in the DEV syste

  • Mysql instance

    I have somehow locked myself out of being able to connect to the mysql 5 server using mysql administrator. Error: Could not connect to MySql instance at localhost. Error: Access denied for user 'root'@localhost I tried Navicat and that also does not