K7t 266 A Pro 2 RU Sound prob

Hello,
When i use the AC'97 chipset for soundS or music, i 've got a problem, the sound is going out by one speaker only (the second is quite, and not as "heavy" as anothere way( like if there are no "mass").
When i use my sound card (16bits sound card (fortissimo II)), then the sound is stereo and good.
do you know why ? is it a motherboard problem or sthg else ?
p.s:i try why pc speakers and Hifi speaker by a hifi amplifier, same result.

Yeah basically the sound card is done for, I tried various things and no sound was coming out whatsoever - yours sounds like one channel is down, I have come across a lot these cases in various pc's where the onboard sound card has died or is in a state of dying....
DocZaf
{;->

Similar Messages

K7T 266 Pro2 sound error

Hi,
I have a MSI K7T 266 PRO 2.
Recently, i can´t get sound from the sound card integrated in the motherboard (Realtek AC'97 Audio).
Windows XP recognizes the card in the system options but doesn´t recognize in the audio options (Control Painel). I updated the bios and the audio driver but doesn't work. In the Bios the AC'97 Audio is enable.
what should I do to resolve the problem? Anyone can help me?
Thanks

Tell us if you have installed hardware lately, that might inflict the sound card. Is it working according to Device Manager? And don't panic. ( Panic leads to massacres. ) Onboard devices might drop out from time to time, but following the advice you already got, it'll come back eventually.
I might ask those who know, I have heard that Windows always had trouble with sound. Is there any truth in this?

GeForce4 Ti on K7T-266 Pro ??

I've just installed my new MSI GeForce4Ti4200 128mB on my "old" K7T-266 Pro board, and i get the infinite loop hangup.
(Prior to installing I did a diskformat and reinstalled XP), I'm using the same Via and NVidia drivers as I used when my GF2 pro card was on the board, which worked flawless.
From reading tons of posts on different forums today, I've learned that the GF4 uses a lot more power than a GF2 card, so the reason for the loop may be insufficient power-supply.
At the moment my ps is a 340W Chieftec.
Before spending cash on a new 450 - 500W power supply, - has anybody got a GF4 card to work on this board (with or without a massive power supply) ?
And if you got it working without a new ps, - How did you do it ??
thanks :(

Hi,
I have
- MSI K7T266 Pro2-RU
- MSI nVidia GeForce 4 Ti 4400-VTD (AGP4X)
- Chieftec HPC-300-202 (300W total, 5V/25A, 3.3V/20A)
- a lot of other stuff (see my earlier thread)
and it worked fine in WinXP for almost a year until just recently when I now get blue screens. I've started a new thread here some day ago about my problem and it seems to be either memory or motherboard error. My thread: K7T266 Pro2-RU unstable and memory errors
In your case I don't think it's the PSU, but I might be wrong.
/wallis

K7T 266 Pro 2 problem

Hi
I'm experiencing quite an annoying problem with my MSI K7T 266 Pro 2 mainboard.
The situation is this:
A bootable CD of mine asks me to 'press any key to boot from cd'
But it does not respond when I type... This seems to be a hardware problem: My keyboard doesn't seem to be useable at that time ( next to the aforementioned problem, num lock won't switch on or off )
It works perfectly before that ( i can press delete to get into the bios ) and after Windows starts booting it works again.
Is there any way to fix this ? My bios version is AMI BIOS 3.1 ( I haven't had a chance to flash the bios to 3.7 yet ).
Perhaps there's a BIOS setting that is causing this ?
With regards,
TumCerHum

http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=28%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6380%20Ver2.0
read 3.2 description

K7t 266 pro: promise chip won't work

the promise controller (as far as i know the: pdc 20265, fasttrack 100) won't start after install of both windows 2000 professional and windows 2003 server enterprise. In both cases it gives the errormessage: "This device cannot start. (Code 10)"
I've tried the following:
using the latest bios version: v 1.9 013102
load latest promise drivers from msi site both with install and after install
2 operating systems: win 2k prof & win2k3 serv. ent.
I'm really don't know what to try next, anyone any clue what may cause the problem?
Tnx a lot
System:
K7t 266 pro v 1.0
Bios v 1.9 013102
Athlon XP 2000+
512 mb ram
Asus V7100 graphics card
realtec ethernet card
on ide 0 and 1: 3x 160 gb maxtor and 1x dvd
on ide 3 (raid): 1x 120 gb maxtor

tnx for your reply osnavi,
The psu goes well, np at all. I finally found the reason of the problem: I downloaded the driver for the pdc 20265, where i should have choosen the fasttrack 100 Raid driver.
A not too smart action :(
Many greetz,
AaAtlantis

K7T266 Pro ver1 AC97 SOUND.

Question;
I have the MSI K7T 266 Pro, (MS 6380) version 1, Bios 1.9, 1.4 Athlon CPU,ATI Radeon 7500 agp card, 19Gig WD hard drive,WinXP Home.
When I enable the AC97 Sound in Bios, and install drivers for it, I get a shutdown and restart like a short or something.
The case I have doesnt allow for the plastic standoffs, mainboard almost has to be mounted directly to the chassis. Any info on that??
I put in Creative pci512 sound card and that works fine, and can enable AC97 sound but as soon as I install drivers for that I get the shutdown.
At first I couldnt get AC97 sound to work at all so after that installed the PCI card. (No jumper for AC97 as the book says)

I have the same board. I get only left channel sound. I asked on this board several times, but I get no answer.
First I thought it may be thacable from the cd player, but Any audio coming in is the same. I tried to uninstall the audio in the Device Manager , reboot, reinstall, but it is the same. Maybe these boards really have some design problems with the audio.
Antal

How do i put a tbred in a k7t 266

do i need bios updates?
im using k7t 266 pro V2

ahhh thanx for the link heres a summary if you dont wanna read all that junk
right now the board wont take tbreds but older boards already do... every1s waiting for word from MSI or a bios update...
GG MSI you lost customers even if they do release a bios update now im not buying another board again from them if u cant support all your products dont release so many.

K7T 266 Pro2 (6380 V3)

Three months ago I bought a K7T 266 Pro2 mobo. When it arrived I thought great as it was the latest version - Ver3.
The is a minor problem with the sound, so I downloaded the latest drivers, but when it came to updating the bios, I realised the board is not supported by MSI.
In fact I have not seen anyone post a question about the 6380 V3. Is there anyone out there with the same Mobo as me? Does anyone know if MSI intend to put it one their wesite?
Thanks.

afaik, this board the K7T266 Pro2 (Ms-6380 Ver 3) is in fact a MSI board not a OEM as one (or two) reader(s) suggested. My imagination tells me that this model was made in only small numbers as a possible kt266a version of the old MS6380LE, that is only my guess though.(The board sports the same boring old green colouration that the LE sports, rather than the expected red of the other K7TPRO2 boards). I've also imagined that the production run was halted (maybe because of newer technology?) , and now we have a few 'lucky' owners out there with this board.
I, too, have not been able to upgrade the bios, it is currently running nicely with Award PG 6.0 which currently supports everything I have thrown at it.
The good news is that it is a KT266a chipset not the older KT266 that is one thing in it's favour. As to support from MSI, I also have had difficulty locating any information about it.
btw....I have just sold this mobo, as I have bought myself a new SOYO dragon Plus to play with.
Good luck getting some support for this board!!

Early k7t-266 pro2-ru XP snafu

guess there's no avoiding saying that I'm new here in this forum, so there.
Anyway, I have a k7t-266 pro2-RU, one of the first boards that came out here in the Philippines, so it is definitely one of the early revs of this product. I've had it for about a year, and had no problems with it. It has the most recent bios version dated March, 2002.
My problem now is that it seems to break any Athlon XP CPU that I plug into it. I've tried clearing bios, made sure that there's no special adjustment I need to do, whether jumper or bios based, made sure that the heatsink is seated properly every time,and generally tried every damn thing I could think of. I've had no luck, so I'm running an Athlon 900 while I try to figure this out. (yes, the board works with non-XP cpu's)
I'd greatly appreciate any help from this forum. I've been thinking along the lines of a voltage problem or just the fact that the board is an early sample... please help, I'm becoming desperate...

I removed all the drives and other peripherals until all that was connected were the board, mem, cpu, fan, vidcard, modem, keyboard and a case fan. My power supply is an enermax 350 dual fan, so there shouldn't be any prob there...
Changing the FSB in Bios was one of the first things I tried to do, wonkaboy, but the CPUs break before I can even hit "Del" and enter bios, and besides, I'm pretty sure k7t266 pro2 ru has auto settings for FSB...
I appreciate the help, I'll keep trying on this side, hope I don't fry any more cpu's.fortunately, I work at a computer shop so it's pretty easy for me to have a non-physical damaged CPU replaced.
Any other suggestions will elicit another long winded reply from me. mbe I shud change my handle to longwind...

Driver K7t 266 pro2

Hi,
I have a slight problem. I had to fomat my harddisk, and so ofcourse lost all the drivers on it. That wasn't the problem. However I seem to have lost both the box and the CD of my K7t 266 pro2 Via k7226a amdxp. Because of the drivers on the internet, everything works fine, exept the onboard sound ;( . I think I may have used the wrong driver for this. Can anyone tell me where I could find the right driver? Because I'm not to experienced (in computers) and I get a bit mixed up in the drivers mentioned. So any help would be appreciated. Thanx )

http://www.msi.com.tw/program/search/ser/SerConRes.php?DATA=1&SearchKey=k7t
there are a few models follow links
find correct one,look for southbridge chip number
and exact name between pci slots

K7T 266 PRO2 will not recognize xp 1700+

Hello
I have a K7T 266 PRO2 version 2 that has been flashed to the latest bios for that board.It should see up to a 2200+ xp processor.The board has been running a 900 thunderboard processor for 5 years now.
I did change the bios to 133 but it still does not see the xp 1700+ . I do not see a jumper on the board for this so it must be changed in the bios.Any idea guys.This crap is frustrating .
signed
someone who is ready to shoot this board.

Is the 1700 a Palomino core or a Thoroughbred core cpu. Check the OPN number on the cpu against the chart in this link. Only the Palomino core will work.
http://www.thedigerati.us/info/amdcpuchart.html#xp
Did you clear the cmos before trying to boot with the new processor?
What are the specs for the memory in the system?

Macbook pro making whining sound from left side, macbook pro making whining sound from left side

macbook pro making whining sound from left side,

Time for a trip to the Apple store genius bar. I suspect that your MBP is still under warranty, so use it to your advantage.
Ciao.

My mac pro has no sound, all is on. isthere a mute i don't know about?

my mac pro has no sound. don'yt know what i did. is there a mute i don't know about? was wking fine.

F10 is usually the function key on MacBook Pro's. You might have accidentally touched it. Hit it again, and the sound will return.
Also, I hope you're not actually using OSX 10.5.1. You should get all the security and performance updates to protect your Mac.

MacBook Pro has no sound at all. Called Apple and they said to reinstall OS X.

I have recently discovered that my MacBook Pro has no sound except for the startup chime. I called Apple and they told me to reinstall OS X because something went wrong in the OS. Is there any other way to fix this?

That's a really overly simplistic answer to your problem. Re-installing OS X doesn't always fix every problem. Yes, it might in your case, but it might not. Are you still under warranty? Either way, I'd take it into your local Apple Store and show them the problem and let them fix it. If the system has to be installed anew, so be it. But rule out other problems first.
Before you do anything, make sure that you have a back-up of your data, applications, etc. If you don't already have a back-up scheme, get an external hard drive and use Time Machine to back up your computer. Then take it into the Apple Store.
Good luck,
Clinton

My MacBook Pro has no sound, but the volume setting works

My 15' MacBook Pro 2012's sound is not working. You can still change the volume by pressing F10 to F12, but not actual sound comes out. The headphone jack is not red (although I have experienced that problem before and fixed it). Whether the headphones are plugged in or if they aren't, there is still no sound. I am running on OS X 10.7.5 with a 2.6 GHz Intel Core i7 Processor, 8GB 1600 MHz DDR3 Memory and the storage capacity is 749.3 GB total.

Have you tried a PRAM reset?
http://support.apple.com/kb/ht1379
Ciao.

K7t 266 A Pro 2 RU Sound prob

Similar Messages

Maybe you are looking for