K7T Pro V1 sound problems and CPU support

I have a K7T Pro V1 motherboard.
I can´t use onboard sound, because when I try to locate it (Windows 2000) on Add New Device, appears blue screen and text "Hardware malfunction. Call your hardware vendor for support. The System has halted".
What I can do? ?( ?(
I also would like to know why this motherboard does not support Duron Morgan processors only Duron Spitfire -versions? :( :(
Thanks for your help!

I have enabled all in BIOS:
OnChipSound Enabled
OnBoardLegacy Audio Enabled
Soundblaster Enabled
The system does not found new device automatically and when if I try to find new device manually, appears that error message and I have to boot the computer again.
I just wonder is the problem onboard?
About CPU´s....
Rob454 told "...theyre not officially supporting the Duron Morgan Cpus".
Does this mean I can´t use Morgans att all (even 900 or 950)?
I mean does these 900 or 950 Morgans also need SSE support?
And if I´ll try to use for example Morgan 1.2 Ghz does it work att all (or read as Athlon Thunderbird)?

Similar Messages

HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS

HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS
COMP
Compaq Presario CQ42-372TU Notebook
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCac=...
PLZ ANY BODY HELP MEEEEEEEE
This question was solved.
View Solution.

You can upgrade to an SSD.
The simplest method is to use an SSD like the Corsair Force 3 and be sure that you purchase the migration kit.
The migration kit comes with cloning software and a usb to SATA/power cable that connects to the new SSD.
It is recommended that you purchase and SSD that is about 256 GB in capacity if you can find one that is affordable.
SSD with migration kit options in a search that I did.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

Macbook Pro fan running constantly and CPU running slow

So, I have a Macbook Pro 2010 2.3 i7 that has started running really slow and the fan is running constantly.
In activity monitor it shows a kernel_task running constantly at around or above 200%.
I have tried all the regular tasks. PRam reset, SMC reset and nothing seems to fix it.
I have also tried a system reinstall to no avail.
Maybe I'm on the wrong track, but from what I have read, the kernel_task might be trying to slow my CPU down because it thinks it is being overworked?
Maybe the fans are also being activated because it thinks the computer is too hot?
Anyway, if anyone has any idea as to what I can do to figure out what is going on, let me know. Thanks

Here is the EtreCheck results:
Problem description:
fans running constantly and CPU slowing down
EtreCheck version: 2.2 (132)
Report generated 4/28/15 7:42 AM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
The following internal tasks failed to complete:
/usr/sbin/system_profiler -xml SPFontsDataType
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.66 GHz Intel Core i7 CPU: 2-core
    8 GB RAM
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 141 - SN = W0020PTD7BWZA
Video Information: ℹ️
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 512 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.8.5 (12F45) - Time since boot: 0:39:23
Disk Information: ℹ️
    TOSHIBA MK5065GSXF disk0 : (500.11 GB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (73.74 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Applications/KeyRemap4MacBook.app
    [loaded]    org.pqrs.driver.KeyRemap4MacBook (8.4.0 - SDK 10.8) [Click for support]
        /Applications/Roxio Toast 6 Titanium/Toast 6 Titanium.app
    [not loaded]    com.roxio.TDIXController (1.3) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.IKMultimedia.driver.StompIO1 (1.0.0) [Click for support]
    [not loaded]    com.avid.usb.mbox.driver (1.0.18) [Click for support]
    [not loaded]    com.digidesign.fwfamily.driver (9.0f4) [Click for support]
    [loaded]    com.digidesign.iokit.DigiDal (10.3.4f181 - SDK 10.6) [Click for support]
    [not loaded]    com.digidesign.usb.elevenrack.driver (1.0.1) [Click for support]
    [not loaded]    com.ikmultimedia.driver.StealthPedal (1.0.0) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) [Click for support]
    [not loaded]    jp.co.roland.RDUSB0138Dev (1.0.0 - SDK 10.6) [Click for support]
        /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
    [not loaded]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) [Click for support]
    [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) [Click for support]
Startup Items: ℹ️
    DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
    RDUSB0138Startup: Path: /Library/StartupItems/RDUSB0138Startup
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.avid.mbox.helper.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
    [loaded]    org.pqrs.KeyRemap4MacBook.server.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.digidesign.elevenrack.helper.plist [Click for support]
    [running]    com.digidesign.fwfamily.heler.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.paceap.eden.licensed.plist [Click for support]
    [loaded]    org.pqrs.KeyRemap4MacBook.load.plist [Click for support]
    [loaded]    PACESupport.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application (/Applications/Dropbox.app)
    apple-scc-20150427-140055    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
    iLokClientHelper: Version: 3.5 - SDK 10.5 [Click for support]
    Silverlight: Version: 4.0.60831.0 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.1
    googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    AdobePDFViewer: Version: 10.1.1 [Click for support]
    JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
Audio Plug-ins: ℹ️
    Avid CoreAudio: Version: 10.3.4.181 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    Digidesign Eleven Rack [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Mbox [Click for support]
    RC-300 [Click for support]
Time Machine: ℹ️
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 425.51 GB
    Destinations:
        Shupester [Network]
        Total size: 3.00 TB
        Total number of backups: 66
        Oldest backup: 2013-06-17 21:18:22 +0000
        Last backup: 2015-03-19 06:26:07 +0000
        Size of backup disk: Excellent
            Backup size 3.00 TB > (Disk size 499.25 GB X 3)
    /sbin excluded from backup!
    /usr excluded from backup!
    /System excluded from backup!
    /bin excluded from backup!
    /private excluded from backup!
    /Library excluded from backup!
    /Applications excluded from backup!
Top Processes by CPU: ℹ️
        31%    mtmd
        19%    Safari
         8%    Finder
         6%    mds
         4%    Dropbox
Top Processes by Memory: ℹ️
    180 MB    Mail
    172 MB    mds
    139 MB    Safari
    131 MB    WebProcess
    106 MB    Pages
Virtual Memory Information: ℹ️
    4.72 GB    Free RAM
    3.28 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    Apr 28, 2015, 06:53:27 AM    Self test - passed
    Apr 27, 2015, 11:34:56 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113456_[redacted].crash
    Apr 27, 2015, 11:34:23 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Pro Tools_2015-04-27-113423_[redacted].crash

BH-940 Purity Pro Voice sound problem

I purchased the BH-940 to be used as a headset in order to avoid office noice when I speak to customers. The problem is that my own voice does not go to the speakers and, because of the sound reduction and the tight ear pads, my voice coming from the room is very low. To put it short - I can't hear my selv very well when I speak.
Is it possible to boost the microphone sound transmission to the speakers in some way?

Alright, I have tried EVERYTHING and I solved it I think. At least it worked for me. It was quite tricky.
1. Connect the headphones with the a USB-charger and the 3.5mm cable.
2. Unfold up only ONE of the headphonerspeaker. Take a pen and push the little square button in the hinge of the headphone speaker (the one who is not folded). Make sure the little LED that tells you the battery charge level flashes (either green or yellow, if its red you need to charge the headphones) for about 10 sec.
3. Now browse to the Lumia 920's settings and choose bluetooth.
4. When the Purity Pro is shown in the bluetooth list try to connect. You will revieve a message that it wont connect. This is "normal" in this case.
5. Now the tricky part:
Try to connect your purity pro within your lumia and simultainously hold the <bluetooth button> + <multifunktion button> and pull out the 3.5mm cable. (the nose at the phone, both hands on the headphones and use your teeths to pull out the 3.5mm cable...) This should be done while you have only one headphone speaker unfolded. If it works the speaker-prompt should be heared and your charger LED should flash (either in yellow or green).
6. Now fold both of the headphone speakers.
7. Pull out the USB-charger.
8. Unfold them and it should be up and running.
Note: This is most likely, not the correct procedure... but this was how I did it and it worked. Feel free to make it easier...

[Solved] Dominator Pro 2PE sound problem

Because i dont want to hear my laptop while playing i bought headset Takstar pro 80. So the problem is that in some games like Dota 2 or StarCraft 2 they are doing high voltage noise, other game dont. I have the newest drivers with Relatek HD Audio manager, and other drivers from Live Updater. In other head phones i dont have that problem. My Takstar pro 80 work perfect with other computers. I was looking for some options in windows manager of this sounds things, and it didnt see there my headset. Other than Takstar pro 80 too, but it send the sound to them.

The Live update is not for MSI NB, so it'll not direct you to the correct driver.
Make sure you download and install all drivers from the MSI webiste download page of your model.
As for the sound issue, what's the audio driver version you're using?
Install the latest one from the download page and see if the sound still remains.

K7N420 Pro, onboard sound problems

Can't seem to enable on board sound on this board, drivers installed, however nvidia nforce MCP networking adaptor shows the following error message "The NDIS.VXD, NTKERN.VXD device loader(s) for this device could not load the device driver. (code 2) ".
Any help would be appreciated .....

This is the instructions from MSI's old page. (thanks Google )
===================================
Installing nForce Core Drivers Under Windows 98
This application note provides instructions to install the NVIDIA nForce core drivers (GART, Ethernet, Audio, Audio Utilities, SMBUS and Memory Controller) under Windows 98. Currently, the NVIDIA installer supports Windows XP,Windows 2000 and Windows ME. Use the following procedure to install all NVIDIA devices under Windows 98 until the release of Windows 98 installer support.
To install the nForce integrated video driver, use the standard Windows installation steps for "Updating a Video Driver."
Driver Package Contents
It is recommended to have the following nForce drivers before proceeding:
GART Driver
Audio Drivers with Audio Utilities
Ethernet Driver
SMBUS Driver (System Management Bus)
Memory Controller Driver
Installing GART Drivers
When a Windows 98 operating system is installed, there are a series of unknown devices in Windows 98 Device Manager. To install the nForce GART drivers, use the following procedure:
1. Extract the GART driver package to a temporary location. GART Manager is present in Device Manager under: PCI Standard Host CPU Bridge. Microsoft Generic Drivers are used until you upgrade with the proper GART drivers..
2. Go to the Device Manager (START>CONTROL PANEL>SYSTEM>DEVICE MANAGER).
3. Look for the following devices:
- NVIDIA nForce GART Manager
- PCI Standard Host CPU Bridge
- PCI standard PCI-to-PCI bridge device
4. Update the drivers using the ones saved into the temporary location in step 1.
5. Restart your system.
Installing the Audio Drivers
Use the following procedure to install nForce Audio drivers:
1. Extract the Audio driver package to a temporary location.
Use the drivers from Audio Driver package to enumerate all unknown media
class devices.
2. Go to the Device Manager (START>CONTROL PANEL>SYSTEM>DEVICE MANAGER).
3. Look for the following devices:
Unknown Drivers
- NVIDIA Audio Codec Interface
- NVIDIA Media Controller Processor
Sound, Video, and Game Controllers
- NVIDIA nForce Audio Codec Interface
- NVIDIA nForce MCP Audio Processing Unit
Note: Various nForce Audio items Under Sound, Video and Game Controllers will be replaced when the System Devices are updated.
4. Update the drivers using the ones saved into the temporary location in step 1.
5. Restart your system.
Installing Ethernet Drivers
Use the following procedure to install Ethernet drivers:
1. Extract the Ethernet driver package to a temporary location. Use the drivers from the Ethernet Driver package to enumerate the unknown Ethernet Device.
2. Go to the Device Manager (START>CONTROL PANEL>SYSTEM>DEVICE MANAGER).
3. Look for the following devices:
Unknown Drivers
- NVIDIA Ethernet Device Network Adapters
- NVIDIA nForce MCP Networking Adapter
4. Update the drivers using the ones saved into the temporary location in step 1.
5. Restart your system.
Installing SMBus Drivers
Use the following procedure to install Ethernet drivers:
1. Extract the SMBus driver package to a temporary location.
SMBus needs to be enabled for DDC to function correctly and system management functions to be enabled.
2. Go to the Device Manager (STARTOCONTROL PANELOSYSTEMODEVICE MANAGER).
3. Go to Unknown Devices / PCI System Management Bus
4. Update the drivers using the ones saved into the temporary location instep 1.
5. Restart your system.
Updating Memory Controller Drivers
1. Extract the files from the (os)\memory directory of the driver package to a temporary location.
Microsoft Generic Drivers will be used. To replace the Microsoft drivers with NVIDIA drivers, continue with Step 2.
Note: Several instances of Memory Controller may be present in Device Manager under:
- Windows 9x/ME or Windows 2000/XP
- PCI Standard RAM Controller
2. Go to the Device Manager (START>CONTROL PANEL>SYSTEM>DEVICE MANAGER).
3. Look for the following devices:
System Devices
- PCI Standard RAM Controller
- NVIDIA nForce 420 Memory Controller
- NVIDIA nForce 220/420 Memory Controller
4. Update all instances of these drivers using the ones saved into the temporary location in step 1.
5. Restart your system.
Note: It is important to restart your computer after all drivers are installed.
=======================================
HTH
BIM2k

MX440 problem and MSI support

I am experiencing problems with a new MX440 and cannot resolve it. I attempted to submit a request via the MSI website, but it never returns a response once the information is submitted. I sent an email to the support account - no response. I posted in another thread where other people experienced a similar problem (MSI Clock). The only resolution (in that thread) was to install Win98.
What do I do? I think my only option is to return the card and NEVER buy another MSI product for myself or a customer. Does anyone have any other suggestions?
Problems:
1. Most games will not play properly, or will only play for a few minutes. Including the games provided with the card. "No One Lives Forever" flickers really bad and locks up (or blue screens). Similar behavior with Giants, Diablo II, et al.
2. The "MS Information" and "MSI Clock" Display Properties crash the control panel application with the following error: "An error occurred while Windows was working with the Control Panel File c:\winnt\system32\desk.cpl". I am not able to view or modify these settings.
3. Live Update Fails with a VBIOS.DLL failure.
4. 3D Turbo crashes the IE 5.5 window when started.
I upgraded the bios on both the MB and video card. I installed the latest drivers for the video card. I've tried every combination of scan rate, screen resolution and 16/32 bit. I prayed.
It's only the 3d apps or apps that are video intensive that have a problem. All other applications work great.
My Configuration:
ASUS P4S333 Motherboard Rev 1.xx (Award Medallion V6.0 BIOS - revision 1006C - 4/19/2002)
300W power supply
Intel P4 1.7GHz
256 MB SDRAM
MSI MX440-T AGP (PCI Mode) Bios V4.17.00.24 / nv4_disp.dll v6.13.10.300
ViewSonic GS771 Monitor running at 1152x864 32 bit 60H scan rate
Creative Labs SoundBlaster Live 5.1 sound card
Windows 2000 Professional
DirectX 8.1

Hi ,
It seems I have the same problem than you; in addition I also have a ASUS P4S333 motherboard; running XP Pro.
Well my problem is really with 3D games, all of them, even those distributed with the graphic card. I am trying to get help from MSI and ASUS on that problem; before going back to the shop for getting a replacement card to test it will change something or getting a new card.
what I have tried is NOT installing MSI drivers since it adds some option in the display menu and constantly crash it when they are selected (MSI info and MSI clock)., got driver directly from MSI from 27.xx to 30.xx, try them all with "no one lives forever" and Medal of Honor with always the same results....freezing screen after 5-30 minutes of games.
I was wondering of a fan problem, that the GPU will get too hot , and you will get the typical freezing bug; however, if the image remains frozen (almost, because it is still working, but it is really slowwwwwwwwwww.), the sound is still playing properly, so the CPU is OK; it seems to be hardware GPU problem....
Did you solve your problem??
if yes what was the solution
Thanks in advance for your answer
Eric
PS: please email answer to [email protected]

Dreamweaver cs5 problems and adobe support close the case on you

I emailed Adobe support with the message below and they closed the case on me and told me to go over to the developers connection website and open a case there. Well of course there is no where to open a case there, it brings you back to the normal support pages, so I opened a case again!
This is just one of the flaws in Cs5 I've found from intensive useage yesterday.
1. Hangs for nearly 2 minutes if you use an external link to ny file like jquery in the header of the pages - detailed below
2. Sometimes when selecting a related file it says "not on server" and actually tries to open ANOTHER ftp connection listed. It switches connection and then says"not on server" - well of course not....because it just changed to another server! However many time you change it back, it won't have it.
3. The pop up css is a good idea but not well thought out. I have to right click to get inspect but when I roll over the areas it doesn't show the css in the css panel. If I right click and select to show the code, it shows me the css, I then have to click it to select it in the left column. All very long winded... WHY NOT JUST CLICK AN AEA ON THE LIVE VIEW PAGE AND IT SHOWS THE CSS THERE INSTANTLY TO EDIT?!
4. On first open after a quit and relaunch, or restart, switching from normal view to live view hangs Dreamweaver for over a minute before live view is displayed.
Very very buggy and I feel I have paid for a beta version.
Hello I now have Dreamweaver CS5.
It has MAJOR flaw.
If a webpage contains the code
<script type="text/javascript"
src="http://code.jquery.com/jquery-1.4.2.min.js"></script>#
It takes over 1 minute to open each page after launching
This is caused by the 'related files' facility
THIS IS TOTALLY UNACCEPTABLE in software which is this expensive.
All design companies such as us use jquery.
Please fix this flaw asap or supply me with a fix. Turning of related files
helps but if I was to do that what would be the point in
having that facility? (which I am paying for!)

Hi,
Appreciate your reply and accept what you say, I'll take on board the suggestions.
My answers under yours below
Second, the Bug Report form is here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform . Technical support is not a bug reporting center, nor are they developers which is why they probably closed your case. And there really are not any questions in your support request it reads like a bug report and an angry one at that, not even starting out calm, shouting almost immediately.
- Frustration, I've been up all night, hours messing with it.
Thanks for the link, I'll post to that. I personally don't agree that bugs this big should be present in software of such high upgrade fee's and which should have been tested but I guess we all know its the way of the world now.
1. Why are you working with remote website files that are not part of your domain and not in your local site? This is a bad practice to get in the habit of. If their website shuts down, so does the functionality of yours. Many here will argue that point.
- This is a valid point I've come across before and reading up on it I found it was said that the site in question was on cloud servers, mirrored etc. The link I posted was from someone elses post who was having a similar problem. I personally use the flowplay/jquery main link which has ALL the jquery plugins/effects so whatever is used on that page works.
http://cdn.jquerytools.org/1.1.2/full/jquery.tools.min.js
We did this as it seemed that was what everyone was doing, it seems I am wrong and I take on board your comments about downloading the file.
2. "Sometimes". That is the key word in your statement. Sometimes it happens, sometimes it doesn't. What happens when it says "Sometimes not on server" and what happens in the other times. What's different? It's usually hard to believe it's random luck. But developers in a bug report need to know these things. What's different about the file(s)? Is it with certain file(s), type(s), etc? How would it open another FTP connection, do you have multiple FTP locations defined within one site definition?
I probably used the wrong word in 'sometimes' - A better description would be "some of the related files". When live view is on the right and code on the left, related files across the top. If I hover my mouse over the files, it tells me where they are. This info is incorrect on 'some' of the files, not all of them but about 8 out of 10.
It shows the file as being in the folder of another account in the site defs, but its not in there, it's in the one I'm working on (and which is live in the ftp file window). So if I click on the file to view it, it says its not available, and asks if I want to download it from the server. That doesn't work because it then tries to switch the ftp connection to the other site and download.
I thought it was muddled so I removed all the ftp sites and set up just one, the one I was working on. But that didn't work... it then thinks the related files are in "unnamed site 1" - anywhere but looking in its own folder or on its own ftp server!
4. You seem to be referring to Question #1 here so that is answered.
"Please fix this flaw asap or supply me with a fix." - So you are saying Please fix this flaw with a patch or give me the patch. Again, this sounds like you want to file a bug report and not create a support request.
- Accepted, you are right, its a bug report, just they directed me to the developer website and I kept ending up here, so began to believe this is where I should be posting.
"All design companies such as us use jquery". - While I wouldn't be so quick to say all, but rather most, I would say see my answer to #1. Why make your site dependent on someone else's?
- Accepted, I appreciate your honest comments and critism and fot taking the time to reply :-)

Satellite Pro L10: sound card does not support Windows 7

Hi
i have a Satellite Pro L10 so i installed a Windows 7 on my system but my laptop can not support Windows 7.
I need update of sound card for Windows 7.
The model of sound car is Conexant CX20468-31 AC97 Audio Sound Card.
Please help me

Hi buddy
What to say first of all you will not get official drivers for this notebook for Win 7 or Vista.
This notebook is oldie and I doubt the drivers will be released.
Reading through this forum threads Ive noticed that most of the user use the Vista driver on Win 7 OS.
Maybe you should google for the Conexant AC97 Vista driver and should try a Vista driver on Win 7
Good luck

Sound Problem and PCAlert and CoolerXP

OK. Just bought the below memory/proc/mobo, and did a reinstall of WindowXP-Pro.
What I'm seeing is that there is a highpitched buzzing noise coming through the soundport. It probably would not usually be noticable with speakers, but because I ONLY use headphones, it's REAL noticeable.
Now here's the weird part. If I start up CoolerXP and enable the cooler, the noise goes away.
Temperature Sensor(s)
Board Temperature : 44.0°C / 111.2°F
CPU Temperature : 52.0°C / 125.6°F
Power / Aux Temperature : 27.5°C / 81.5°F
Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 3924rpm
Voltage Sensor(s)
CPU Voltage : 1.63V
Aux Voltage : 1.87V
+3.3V Voltage : 3.23V
+5V Voltage : 5.03V
+12V Voltage : 11.98V
-12V Voltage : -12.45V
-5V Voltage : -5.15V
Standby Voltage : 4.99V

OK. New information. The "buzz" I was talking about is apparently beeping that was coming so often it sounded like a continuous buzz... my computer sits in such a way that the back of the computer is visible from where I sit, and as the computer started up, I started hearing a beeping sound which corresponded to the ACTIVITY led on the NIC. every time the activity light comes on, I get a beep. Reason I thought it was a buzz was cuz I was downloading when I first heard it, so the ACTIVITY led was constantly lit. Also tested by unplugging the NIC. No NIC=No noise.
Still weird that simply turning on the CoolerXP makes the sound go away.
Suggestions? I know I could prolly fix it by goin down & buyin a cheap $20 nic & stickin it in a pci slot but I don't wanna hafta spend that money if there's another fix.

Many problems and Apple Support isn't coming up with answers

Bought an apple tv yesterday. Am not happy.
I was on the phone with a tech for 2 hours yesterday. He had to guide me through upgrading it's software. But he couldn't resolve the problem I have with renting a movie on apple tv. Had me send an email to support!!!!!
Pictures and music sync and work fine. What doesn't is this:
1. Attempting to play a purchased tv show (sync'd from iTunes) on apple tv, after I select the tv show on the apple tv interface, apple tv gives me the following message "apple tv is not authorized to play this content."
2. Apple TV does not allow me to rent movies, it gives me an error message that it does not recognize my apple id or password. I assure your, after many tries with the tech rep on the phone, I know I didn't type it in wrong.
3. Apple TV is not able to access iTunes to authorize sync'ing a movie I rented on iTunes. I don't think this is even sych'ing. Please don't tell me that iTunes rented movies are not enabled to be sync'd (not a feature?).
4. Apple TV searches on YouTube gives the error message "content not found cannot communicate with YouTube please try again later."
Apple TV does play trailers for the movies available to rent. I expect this means it is able to download this off the internet.
So anyone want to try to beat apple's supports next 24 hour window for suggestions. It will be very much appreciated.
Other details:
cable internet (tv, tele, internet all in one package)
Airport express (cable modem goes direct to the Airport express)
iMac sunflower OSX 10.3.9 (yes I know its old (5 years), but it still works fine - directly connected to airport via cat5a ethernet connection, no airport )
MacBook OSX 10.4.11 connects via airport.
Canon MX300 connected to airport express via USB.
I'm in NY with a USA apple id.
Computer was purchased and used in the UK before I moved back to the USA
Thanks,
Dan
Message was edited by: longtalltexan

I had such a strange experience.
I bought 2 160GB ATV's to replace my original 40GB. One worked, right out of the box using wireless.
The other, using wired Ethernet couldn't connect to Apple store to rent movies as described in many posts.
I tried putting it on wireless. I tried removing WEP. I downloaded the newest update. I reset the machine by taking out the power for 1/2 hour and then coming back.
I gave up after 2 hours.
I took it to the apple store today and replaced it and the new one worked right out of the box in wireless mode. Go figure.
Apple support was useless.
--Jeffrey

Final cut studio pro 6 install problems and error message

Purchased a new macbook and am having trouble installing Final Cut Studio Pro 6- get this error message: You can't open the appliction FinalCutStudio.mpkg because PowerPC applications are no longer supported - have never seen this before, any clues?

The installer requires Rosetta to be present, but Lion doesn't include it anymore. You can try to install Rosetta from a Snow Leopard disc using the "Optional Installs". Note that this is not officially supported: http://support.apple.com/kb/HT4769
There have also been reports that Lion will break most plugins for FCS 2 and FCS 3.

CS3 Licensing Agreement problem and Bad support

I purchased the CS3 Web Premium and have used to create web pages for my business. This product has stopped working 4 times! "Licensing has stopped working". #1 The first call to the support was bad, after being directed to the adobe website and given minimal instructions, the person hung up. I eventually unistalled and reinstalled it. #2 same error 2 months later, same bad support, spent over an hour on the phone without resolution. Did the install again. #3 the person was helpful and we worked through the adobe site, downloaded a fix. #4 which was 2 days later and right now CS3 is down again. I have spoken to Rose, she tried to help and emailed me info, hung-up. Sean gave me the same info and when I told him that I did it already. He hung up on me. The next person kept asking someone behind her what to do next, she passed me to a supervisor and he emailed me information. I followed that and it STILL DOES NOT WORK. I called back again and spoke to another helper, she was surprised that it did not work yet, gave me the website and hung up on me. "Licensing has stopped working" My online business needs updating and this software does not work! I have asked this to be bumped up to a manager. 3 times they said I would get a call back. Nothing yet. Is there any help out there. I plan on posting this information on every blog and website until this is fixed!!!

Welcome to Discussions Jerry - your first problem should be helped by resetting the SMU. Shut down, unplug everything from the computer, remove the power cord. Wait 15 seconds, replace the power cord, then start the computer.
Your second problem could well be faulty RAM, since most memory is sold with a lifetime guarantee, I suggest you return it to the vendor and get a new stick. You can also run Rember, let it loop dozens of times unless it immediately reports a fault, and see what it says.

Problems and PDF Support

I noticed that the iPod touch supports PDF documents, or at least the one I tried out. The iPod touch can read the PDF manual for itself.
A couple of problems I've discovered:
1. Live Updating bugs.
2. Inability to listen to music while doing certain other tasks (i.e., web browsing).
3. Inaccurate volume control -- it seems as if the whole volume bar from 0+ to 1/5 is the same volume.
Other than that, I am pleased with the interface of the device. I must say that I like it more than not, and I'm pretty certain that the mentioned problems can be fixed with firmware updates in the future.
Also, I don't believe that my screen is one of the defective ones.

blitz_nerd wrote:
I noticed that the iPod touch supports PDF documents, or at least the one I tried out. The iPod touch can read the PDF manual for itself.
So, are you accessing PDFs through Safari? I am very happy to hear this!
gary2400

K7T Pro V1 sound problems and CPU support

Similar Messages

Maybe you are looking for