K9N Neo V3 wont boot at all and has constant green light

Hi guys, as you can see I'm new to the forum and new to PC building this is my second rig and not my favorite for some reason this motherboard just wont boot. when i push the start button the heatsink fan spins and the power led stays green but other than that there's no other activity
heres my specs
MSI K9N Neo V3
AMD Semphron 3000 am2
512mb NANYA PC2-4200
Tested with 250w and 300w psus
Ati radion graphics card Pci-e
200gb hd
note these parts are mostly testing items to test the board before i buy more expensive parts any help would be great

Quote from: Fredrik on 24-October-08, 05:20:56
You will barely, barely get by with a very good 300W PSU, but that needs to be very good. Any hardware changes or addings will render your system unusable. I would recommend you a Zalman unit of about 400 - 500 watts. ~80 - 100 $. So you can "develop" the system.
But your system seems to pass POST. Can you disconnect the hard disk, possible opticals (CD/DVD) and if you have any USB things, and try again, please. Make sure you got the required power cables connected!
Nanya memory is new to me. It wouldn't be a Dell special (memory)?
thanks for the reply im currently using a dell system but my new builds motherboard just wont boot at all thats the main problem the psus seem to boot other systems so im unsure to whether the board is healthy or not since i cant connect the cases original audio plug to this mobo :( its unable to give me beep commands and the green light as ive read else where often means something bad but the condition dosent seem to change even when i change out parts
and the psu is a 12v

Similar Messages

Why does my mac say it's not charging when it is plugged into the wall and has a green light?

It is also not fully charged, its on 20%

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro

PC wont boot at all with X-fi and 8800 GTX c

My A8N32-SLI Deluxe motherboard and my BFG 8800 GTX video card seem to not like the X-Fi... It wont boot at all.... If I remove the X-fi, it boots fine. I have tried the X-fi in all available slots, and moved the 8800 to both slots, but nadda..Once, it booted, but the X-fi wasnt 'seen' by the MB at all... I can run onboard sound, but it isn't as nice, and I dont get to use the EAX...

Cat, what processor/memory are you running on the mobo along with the x-fi and the 8800 gtx? What drivers do you use for the 8800 gtx? Latest?Can you run the Battlefield 242 demo with the X-Fi and Ultra/Eax Audio settings on (all audio settings at max) without problems for at least an hour with no stutter/crashes in h20x2k.sys or whatever?I don't know if you can be bothered, but it would be amazing if you tried it and reported that it works fine, if it does. I'm getting HEAVY stutter with a DFI Lanparty SLI-DR Expert (Nforce 4). It starts out fine, but gets worse and worse as time goes. By about 5 minutes to half an hour it's pretty much unbearable and/or crashes with a bluescreen. Please see my other post for this (look for bf 242 audio channels). Setting the sound to "hardware" seems to be a temporary fix, but I'm definitely not satisfied. I have no problems running general windows/2d audio otherwise... silky smooth. I'm actually considering replacing my motherboard in the near future and I'm gathering options on "X-Fi-Friendly" motherboards. I'd like to hear my Battlefield 242 audio with all its 28 channels in EAX 5 someday... Perhaps Creative should consider putting stickers or logos on motherboards to ensure they play nice together lol :-D?ThanksMessage Edited by HeatSurge on 06-07-2007:26 AM

N97 White Screen .. Phone wont boot at all ... Stu...

Hello all,
So I have finally stumbled upon the White Screen of Death ... Really sad that it happened but I still have hope that it may work. THe phone does not boot up and its stuck on the Nokia logo
[Long read]
It happened one before a day and I managed to find a helpful topic
/discussions/board/message?board.id=smartphones&thread.id=141381
It had everything regarding reset codes and whatnot, but the really helpful message was from grschinon .. ( he seems to know what hes doing ) .. for he shared an amazing technique of holding the green and red buttons while booting up the phone, and it worked !!
But yesterday, it happened again .. The screen wont light up and the keylock was stuck, so I just removed the battery ... I turned it on while assuming that the red/green button technique will work, but it didnt
I tried it over and over again ( been trying for half a day actually ) .. but with no avail, it didnt work ..
I tried connecting it through usb, with the wall charger, different combinations of buttons ... meh none worked
Its really annoying that half of my friends keep saying, THIS is why you get a blackberry .. and similar stuff .. My previous phones are all Nokia and this is just a huge dissapointment .. the N95 is 500000 times better than the N97 in stability and etc ... I was anxiously waiting for v2.0 ... now my n97 is dead
[/Long read]
I understand that there is a solution that will FORMAT the whole phone, but I dont want that, there are lots of pictures on my internal memorycard (32gb one) and 30+ applications (if not more) .. I seriously dont want to lose all of those ..
So do you know any other way that I can fix the problem ?? Is there a soft reset combination that i can use rather than the hard reset one??
Please advise, your comments are really appreciated,
Kind Regards,
Z
Message Edited by ZaZu90 on 10-Oct-2009 12:08 PM

These are the solutions that i've colected over the internet:
I hope it help's you!
N97 White Screen .. Phone wont boot at all ... Stuck at Nokia logo
They instructed me to turn on the phone pressing the green, red and camera button at the same time as I pressed the power button.
It worked and the phone started.
I didn't need to format my phone.
Had the same problem with my White N97 (not that the colour probably makes a difference).
Was using the Facebook App on the main screen as a widget, tried to start it up by touching it - it seemed to not start even after waiting or trying multiple times.
So i thought to myself, "I'll just reboot my phone, that should fix it."
BAD IDEA.
Got stuck on the White Screen with the Blue "NOKIA" on it, so i thought...i'll wait and see what happens.
Nothing...for hours.
So i pulled the battery and put it back in again....powered on....same thing..."NOKIA"...and nothing else.
Repeated this about....10 times, getting more and more nervous that i had turned my $950AU phone that i had boasted to my friends that is better than their iphones....into a useless brick.
So, i turned to Google looking for answers...
Someone said they left the battery out of the phone until it went flat and had some success.
I found something about other users having a similar issue with other software (Garmin GPS software), and also the "Mail for Exchange" application.
They mentioned something about the only way to get it working again was to hard reset the phone to stop the apps from going online...
I REALLY didnt want to do a hard reset, as i had a bunch of apps and data that i DID NOT want to lose or spend like 3-4hours re-installing.
SO...I got thinking...how can i stop my apps from trying to go online without a hard reset.
So this is what i tried - and it worked!
1- Power off phone (if power button responds)
2- Pull out battery.
3- Remove memory card (if you have one)
4- Remove SIM card.
5- To make sure phone has no residule power hold down power button without any of the above inserted.
6- Re-insert battery only (without SIM card or Memory Card)
7- Cross your fingers and toes. (optional...but if it helps what the hell.)
8- Power on phone.
9- IF the phone prompts you to go online in any way Select NO. (or if it says do you want to activate Offline mode say YES)
10- Press Options key when you get to the home screen and select "Content to offline mode"
11- Make sure "Offline" is displayed in top left corner near where the signal bar usually is. ( if it doesnt say "Offline" press the power button briefly, and select "Offline" (should be underneath the "Pager" profile)
12- Once you have made sure your phone and applications are in offline mode - Power off phone using Power button.
13- Remove battery
14- Again to make sure phone has no residule power hold down power button without any battery or cards inserted.
15- Re-Insert SIM card, Memory card and Battery.
16- Power on Phone.
At this point the phone should start up as per normal, I knew it was working straight away for me because my SIM card prompted me for a pin number. (which happens normally for me when I turn on my phone)
After the phone is ready, i just put my phone back into online mode by selecting my "general" profile, and put my content back online.
Please note: This is what worked for me. Results and Mileage may vary.
It seems the issue is that the phone startup is being held up or stopped due to Programs or Applications tring to go online.
For me I suspect it could have been the Facebook App due to the problems i had before powering off my phone the first time.
I am going to put my Content to offline mode if I need to reboot my phone again, at least until nokia pull up their socks and release a fix for this.
Side note: my N97 is also running Version 11 Firmware. ( not that it may make a difference)
Good luck to all with same problem, hope this works for you too.
Had the same problem but I just removed the extra memorycard and formatted it on my computer before I put it back...
after a few days trying without micro sd inserted
the result is, n97 still stuck in white screen nokia logo
it happend always if i turn off my phone without sign off the facebook app widggetz..
here is how to crash your phone
put facebook widgetz on nokia standby screeen
and then put it online mode
klik the facebook app
just do anything in your facebook for check it already connected
klik end key
now turn off your phone without sign out the Facebook
turn on again
and boom your phone will stuck on nokia white screen logo
and it will never boot forever..
sometime when you take off the batery and reinserted again it can boot normaly but the percentage is 20% only..
soo if your n97 can boot normaly after FB "accident" that mean you lucky and i sugest you unistall your FB ASAP before n97 stuck again on white screen nokia logo..
is anyone have problem like mee??
i like to hear another opinion...
i think nokia already knew this problem, that way when you check ovi and your phone set to nokia n97 the facebook app is missing...
my firmware is v11 already

My ipod wont charge at all and there is a continuous charging sign when plugged in ? what can i do

my ipod wont charge at all and there is a continuous charging sign when plugged in ? what can i do

- Have you tried differnt cable/USB port?wall chargers
- Have you tried resetting it:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- When you connect it you computer doe you se the iPod in iTunes? If yes I would try restoring it. First from backup and then to factory defaults.
- You may have a battery or hardware problem and thus an appointment at the Genius Bar of an Apple store may be in order.

Hi, i'm having great difficulties with my safari on my laptop it will not open at all and has been doing this for quite a long time now, can anybody help??!!!

hi, i'm having great difficulties with my safari on my laptop it will not open at all and has been doing this for quite a long time now, can anybody help??!!!

What laptop? What operating system? What version of Safari?

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

TS3048 I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, won't connect to iMac. Pleas

I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, both won't connect to iMac. Please help...

Hello:
Try resetting the SMC:
http://support.apple.com/kb/HT3964
Barry

P35 Neo FR wont boot with 1066 Ram

Hi Guys,
I have a problem with a new build. The specs are
P35 Neo FR
E8400 (not overclocked)
2 gb Crucial Balistax tracer 1066 Ram
XFX 7900GS card
450W PSU
It will boot and I have been into windows to which all seems fine, however I have an issue.
1. The BIOS and CPU-Z are showing my ram at 667. I have manually adjusted it to 5-5-5-15 and set the divider so it should be running 1066. However it wont boot and goes into the re-boot over and over and over and over and over again "mode". This can only be rectified by re-setting the CMOS and then it will boot with its origional 4-4-4-24 timing @ 667. I have checked the voltages and they make no difference. It will only boot when the LED's on both ram sticks are lighting up on first power up. Ram has been tested in another PC and doesnt seem an issue.
Bios is 1.5 I think. Should I flash and go to 1.8?
I will also try the Mobo, PSU, HD and GPU without anything else attatched to see if there is a problem
Also, 1 stick of ram at a time to see if thats causing an issue.
I would appreciate any suggestions
Thanks

Quote from: Jack the Newbie on 19-March-08, 22:28:13
Which FSB/Memory Ratio did you choose in BIOS?
Does it work, if you choose the divider for DDR2-800 MHz?
What is the memory voltage recommended for these modules @1066 MHz effective speed?
Did you try with one stick of RAM only?
Thanks for the quick reply
I think the divider was 1.1-6? I will confirm in a couple of hours once I am home. It works at 1-1 but the speed was 400mhz. It also ran at 667. Whatever that divider was.
I am going to try the one memory module test tonight and I will also report on that and the DDR800 settings.
http://www.crucial.com/uk/store/partspecs.aspx?IMODULE=BL2KIT12864AL1065 Is my ram and its rated at 2.2V
Thanks in advance and I will update in the next few hours.

Re: K9N Neo V2 hangs on XP Splash and (sometimes) in XP on cold start!

I have a similar problem with my K9N Neo V3. I originally had WinXP installed and it would either crash right at startup, crash at the XP splash screen, crash at the XP welcome screen, or crash during a game. It literally has a mind of its own. Sometimes it would crash, sometimes not.
I tried updating the drivers for the mainboard, the display driver, and I reformatted everything and reinstalled WinXP. That didn't work. Now I've reformatted everything again and installed Vista instead. Now its even worse. It crashes more frequently and this time even crashes during simple tasks like opening folders.
So, should I change the motherboard?
cpu: AMD Athlon 64 X2 Dual-Core 6000+ Socket AM2
video: GeForce 9600 GT 512MB/256bit/DDR3/PCI-E
memory: 2GB Geil DDR2 PC 6400 800MHz, CAS 4
Sorry thats all the info I can get about my system.

>> << "Cheap Sumvision PowerX 450W Power Supply 450 Watt Switching PSU (KY2500ATX)"
Minimum +12V~26A recommended for system with that video card, the 450 watts recommended only pertains to high quality PSU and not cheapos and one should rely on amp specs anyway.
As Wonkanobby said and I agree since I have one Corsair VX450 w/+12V~33A would be a good choice. Even though the price is 3-4 times more than what you have the PSU is not something to be cheap with.

Neo platinum not booting with all in wonder?

I've got a k8n neo platinum with a 2800+, a gig of crucial pc3200, an Antec sonata with it's True380S powersupply, and an ATI all in wonder 9700 pro.
The first time i booted it, the fans spun for a second, then they shutoff, thats all the happened. Nothing on the screen, just 4 green lights on the D-bracket for the time that the fans are on. I later replaced the VGA with an old Nvidia Geforce MX i had lying around. It booted fine, so I installed XP and the minimal stuff. I also installed MSI's chipset GART vga drivers, and tried to install the AIW again. It booted perfectly, so i assumed the problem was over and installed ATI's catalyst and the appropriate software that came with it. Upon restart after the installations, nothing happened. Same problem as original. So after i switched it out for the nvidia again, i tried a system restore back to when i had it working, but it still didn't work. Can anyone help me as to whats wrong? I've checked the bios and as far as i know it seems ok, i'm going to flash it in a little bit.
Thanks,
Bill

Have you got the USB connecter to the Antec sonata front panel. If so this may be the cause of your problem.if your front usb does NOT work with your k7n2 board read this... Don't worry that it's not your mobo the MSI pin outs to the USB plug are common.
luck

Itunes wont open at all and its not responding

okay hi im new to the this but ive been using itunes forever...uhm i kno there has been alot of topics relating to this but i have read everything and it didnt help,.. uhm i tried to install the microsoft cleining thing and i did but i cant find the icon to open it.... well i need some help itunes wont even open up at all and i need to fix it b4 christmas cuzz thats when i get my ipod well plz help thanxs
-Danny

danny,
it was a little hard to read your post due to your grammar, but I need some more info on you in order to help.
First off, I need to know which Windows OS you are running? What antivirus and firewall programs are you running? Is iTunes and/or Quicktime installed on your PC?
Have you gone to Windows Website to download and install any new updates recently?
Post back and let me know

Macbook wont boot, loading stuck and shut down suddenly

I just buy my macbook pro 1 month ago, im a new user. my macbook pro wont boot up and after 30% loading on startup, it suddenly shut down. why? can someone help me? i dont know what to do

I just buy my macbook pro 1 month ago, im a new user. my macbook pro wont boot up and after 30% loading on startup, it suddenly shut down. why? can someone help me? i dont know what to do

PT880 Neo - Won't Boot at all

Help me anyone!
My computer won't boot at all. I recently put it together and the bios works all the way to the Boot-start (accordingly to D-bracket) but nothing happends after that. The bios recognices the SATA, floppy, DVD and the CDrom (all at once or one by one - standalone). I'am trying to install Windows XP Prof sp1a.
- I've tried with full system (SATA, DVD, CDrom and Floppy).
- I've tried with only the DVD (disabled SATA).
- I've tried with only the CDrom (disabled SATA).
- I've even tried with only the floppy (windows 98 start floppy).
- I've tried two different Win XP prof disc's.
- I've tried with or without PATA-IDE and SATA and all the possible
combination of them.
Since the computer won't read from the DVD, CDrom or the floppy I can't
flash the bios or install the RAID-driver from the floppy. After reading about the +12 Amp in this forum I changed PSU to Aspire but it didn't help. I really need help from you all because I'm so tired of trying now and I GOT THREE SIMILAR COMPUTERS ACTING THIS WAY ON MY KITCHENTABLE right now (for me and for two friends). I can't bellieve I was so unlucky as to receive 3 MoBo's that won't work so It has to be something else. One strange thing though - The press F11 for BOOT meny (boot order) doesn't work at all - otherwise the Bios seems to work as it should.
Best regards
Lars

I've got the same problem with a P4 3.2E. At times I get into "Windows loading" before rebooting, other times it freezes at a black screen just past POST (with a blinking cursor in upper left-hand corner). One time I actually got to desktop and just as icons were appearing, it rebooted. It really seems memory related to me. Running PC4200, I set all timings as loose as possible, make sure there was enough voltage going everywhere, but still no success. I'm going to try swapping in my 2.8C northy to flash to BIOS 1.4, and I PM'ed NovJoe for that beta...hoping he'll be kind enough to shoot it to me. This is just a backup board while I prepare my IC7 for thermo electric cooling, and while I am impressed with all the options and voltage ranges in BIOS (from an extreme OC'ing standpoint), I'm not too impressed with this supposedly "Prescott Ready" board so far. Hoping I can get this thing solved tonight, cuz I lost out on a night of gaming last night.

My 2008 iMac will get to the white boot up screen and has the loading circle and then it will freeze. And will freeze when attempting to boot recovery or bootable disc of Mavericks

Hi there, I have a 2008 iMac 24' 3.06 Intel Duo with 4gb ram. And yesterday it was working totally fine and jolly with no issues. Then I noticed there was an OS X update for Mavericks, so I finally decided to do it, and once it was rebooted it went to like the grey screen and I could move my mouse, just nothing else was there. So I tried to restart it, and then it booted up, but was really laggy, and so I decided to restart it and try again, this time the iMac froze at the login. So I decided to take it apart, pull the 500gb hard drive, connect it to my MacBook Pro, and then formatted it in Disc Utility. From there, I opened the Mavericks installer on my MacBook and then installed it to the iMac's hard drive via usb hard drive enclosement. And once the install of Mavericks was completed, I put the hard drive back into the iMac and tried to boot it. It now boots up to the white screen with the Apple and the loading circle underneath the Apple and then it freezes and doesn't go any further. So then once that happened, I turned it off and tried to boot it into recovery mode. Then it freezes on the screen with the Apple and loading circle below it. Then out of desperation, tried to use a bootable disc of Mavericks to see if i can at least get the iMac to boot up again, with no success. It froze at the same point again. So now I reach out to the Apple Community to see if anyone else has an idea on what I can do or if anyone had this issue and what they did to resolve it. Any help would be great. Thanks.

mddcfilms and Pat75, I'm having precisely this same issue -- no booting but spinning and freezing gear under the Apple logo. Have either of you come to a resolution? Here are my details:
iMac, Early 2008, 24”, 3.06 GHz, 4GB
September 2013: Nvidia GeForce 8800 GS GPU repaired, HDD replaced with Western Digital 2TB
21 April 2014: Erased HDD with Disk Utility on Mavericks USB; clean installation of Mavericks from the USB. Process completed without issue, including registration process. After a minute or two of poking around, machine shut down immediately (not through the shut-down process).
Since then it will not boot up. Grey screen and Apple logo appear, with gear spinning; the gear freezes, then the machine tries to boot up again. Occasionally I’ll hear “To use English for the main language, press the return key.”
I’ve tried booting into Safe Mode; same gear freeze and restart.
I’ve tried booting to the 10.9 Recovery disk; same gear freeze and restart.
Tried booting from Mavericks USB; same freeze and restart.
Tried booting from 10.6.3 DVD; same freeze and restart.
Ran Apple Service Toolkit (at Stormfront in the UK), which turned up nothing in error.
Started in single-user mode to test HDD and RAM, which are fine.
Started in verbose mode to check logs; some error messages but nothing seems crucial. After the log screen, the grey screen and Apple logo appear, gear spins, and then freeze.
Cannot get to Apple Hardware Test (vintage machine too old?)
Cannot get to Target Disk Mode with my MacBook Pro
Ideas: Potential booting flaw in Mavericks installation. Firmware incompatibility with Mavericks. Hardware issue in Nvidia GPU (known for problems). At the moment I'm hoping that it's a Mavericks installation or firmware issue, though I suspect the Nvidia GPU has blown up on me. These graphics cards are known for being pieces of junk, so I may try installing the lower spec ATI Radeon 2600 GPU if I can find one at a reasonable price.
Anybody else have precisely these problems or have any advice?

K9N Neo V3 wont boot at all and has constant green light

Similar Messages

Maybe you are looking for