Keithley 2701 and _KE2700_initwithoptions LINK error

Hi
My labwindows compiler does not like to compile my programme which used the KE2700_Init or INit with options
it comes up with Project Link Error for the fuction?
any ideas?
Thanks

I think I had the package
looking at the two CWS files I noticed the addresses were different, the address to the DLL missing.
I had to add the .fp fpr Keithley to the CVI. I thought the thing adds itself when it comes up.
I had the same problem with INI routines and I had to add those too.
thanks

Similar Messages

My external hard drive won't mount and shows a 'sibling link error'. I've seached the forums but need a very dumbed down set of tips for the computer illiterate- help?

The forums have suggestions on this topic but I don't understand the lingo used.

Remember card catalogs in libraries? The computer has its own card catalog that tells it where all the files are. That's known as the directory.
Sibling link error indicates something is wrong with one of the cards, making the computer lost. Now the computer will put forth a bunch of gobbledy gook to fix this error, but you can do it.
Since the issue is with the external hard disk, you must select it with Disk Utility's First Aid selected. There you will repair the disk. If it can't repair the disk, you will need to use a more powerful tool. The question is, is your data backed up elsewhere, or is it not? If it is not, the same symptoms of a bad directory can also implicate a dying hard drive. You'll want a data recovery tool if you aren't backed up. If you are backed up, and there is nothing that can't be replaced on that external hard drive, get Alsoft Disk Warrior. This should fix most bad sibling link errors repair disk can't. When it can't, you can give up on the external hard disk.
P.S. Permissions has NOTHING to do with the directory. Do not worry about issues with permissions or attempting to repair it at this stage.

Oracle 9i and RedHat 7.1 link error on ins_plsql.mk

I've been reading the message board and it has gotten me through most of the install. All the files install correctly but during the link phase at 62% completion I get an error on ins_plsql.mk. If I run the command manually in a terminal window I get errors on "-ldl". I tried downloading the glibc files mentioned in the 8i message board but I git the same result. Has anyone had this issue? I'm afraid that I may still have the wrong libraries and binaries for linking. Has anyone installed this successfully on RH 7.1? I know its mpt supported bt it should work.

I'have the same error, to corect this problem
I download binutils-2.10.0.18-1 from this location ftp://ftp.redhat.com/pub/redhat/linux/7.0/en/os/i386/RedHat/RPMS/binutils-2.10.0.18-1.i386.rpm
All the proces of installation is documented in this page http://free-zg.hinet.hr/denisk/oracle/901install_en.html

Oracle and SQL Server Database Link errors

I am having following error messages while setting up the ODBC connection. I want to access SQL Server tables from within Oracle8i. I have followed all the instruction of Oracle Generic Connectity document and have tested ODBC connection with ODBCPING as well as with TNSPING. Have created Database Link also within Oracle for SQL Server. But when I access the SQL Server table from within Oracle I get the following error messages.
ORA-12500: TNS:listener failed to start a dedicated server process
Could any body suggestion the solution please.
Thanks and regards,
Ghulam Mallah

There is a Heterogenous Services/ Generic Connectivity forum that is probably going to have a lot more people familiar with these issues than you'll find in this forum. I would suggest posting over there.
Justin

Keithley 2000 and 7002 with trigger link

Hello!
I am writing an application for the 2000 DMM and a 7002 switch system. The instruments are set up with trigger link. What I want to do is simply to load a scan list to the 7002, scan and read back the results from the 2000. Here is what I have so far in terms of SCPI (I have looked at the Keithley LV drivers but I think they complicate stuff + there are no high level functions for trigger link setup included):
DMM *RST
SW *RST
SW Open
SW Scan (@2!1:2!40)
SW :TRIGgerOURce TLINk
SW :TRIGger:TCONfigureROTocol ASYNchronous
SW :TRIGger:COUNt 40
SW :ARM:LAYer2:COUNt 1
DMM :TRIGger:COUNt 40
DMM :TRIGgerOURce EXTernal
DMM :INIT:CONT ON
SW :ARM:LAY1OUR IMM;COUN 1
SW :ARM:LAY2OUR IMM
SW :INIT
DMM :TRACEATA?
Please advise,
Stefan

hi morgue!
I am doing a program like your, but with Keitlehy 2001.
To make the syncronization you wrote just these lines? I am doig this in labview, with the programs found in the drivers given by keithley but is not working properly. When I put the triger link, it scans and show just the first measure.
Do you still have this programm?
thank you

C++ newbie gets linking error

Hi,
I am writing my first C++ programs (been a SQL/DB programmer for last 10 years) on Sun Solaris. Here is my source code:
#include <list>
#include <string>
#include <iostream.h>
using namespace std; // You must use this to include STL!
int main()
// Create list instances
list<int> list1; // Empty list
size_t n = 10;
double val = 3.14;
list<double> list2(n, val); // Create n copies of val
list<double> list3(list2); // Create a copy of list2
cout << "Size of list1 " << list1.size() << endl;
cout << "Size of list2 " << list2.size() << endl;
cout << "Size of list3 " << list3.size() << endl;
// We iterate over the elements of list 3 and print its elements
// Create list iterator
list<double>::const_iterator i;
// Print every character in the list
for (i = list2.begin(); i != list2.end(); ++i)
cout << *i << ",";
and getting the following linker error:
/SUNWspro/9.0/exec/SUNWspro/bin/CC -o test test.cpp
Undefined first referenced
symbol in file
std::bad_alloc::bad_alloc() test.o
void*operator new(unsigned,void*) test.o
ld: fatal: Symbol referencing errors. No output written to test
I have heard of Solaris C++ compilers having problem with the use of templates..... is this the problem here or am I just missing some arguments/libraries?
Thx in advance!

In the interest of keeping code examples short and simple, textbook authors do things in their code examples that are not suitable for real-world applications. Apart from "using namespace std", you find global variables and functions with short names, and no attention paid to error detection or recovery. (They also use more explanatory comments in the code than a real-world program should have.)
That's OK when you are illustrating particular language points. You want to highlight the point, and not have a lot of distractions. But in my view, not enough authors go on to explain good programming practice, and show realistic examples.
For the case in point, the Standard Library declares thousands of names. They are in namespace std to help avoid collisions with user-defined names. Once you put "using namespace std" into your code, you import all of those names into the global namespace, creating opportunities not only for compiler complaints due to name collisions, but for subtle errors involving binding symbols to the standard library that you expected to refer to your own definitions.
I never write "using namespace std" in real code. I sometimes use it when creating tiny test cases for bug reports. But as you saw in my earlier comments, the difference in the sample program between a dangerous programming practice and a much better programming practice was one line of code!

Ucbhook Linking error when compiling simucb.dll

I'm trying to compile a simucb.dll and one of the linking errors is "ucbhook.obj : error LNK2001: unresolved external symbol _gstdwrt". Since ucbhook.c is generated automatically by MarixX and it presumably knows what it is doing, I'm guessing that I haven't included the library that defines gstdwrt in my C++ project. Does anyone know what this library is and where I should look for it? Thanks!
Eric

Thanks for the reply. My first question is: What is an Sa_user.cmd file and what's it look like? Is it like a makefile?
I'm compiling an ugly mixture of C and legacy Fortran code. There is a user code block written in C (which the ucbhook function calls) which calls a Fortran function which then calls other Fortran functions. I don't know what that may do to the complexity of Sa_user.cmd. Currently, I'm learning how to use Microsoft Visual C++ to compile and link all my disparate files into a simucb.dll and I'm mired in the linking errors. Once I have the simucb.dll, I'm gonna stick that in my project directory and let MatrixX do its thing.

Ethernet connection with Keithley 2701: Error in Initialize

Hi,
I am a beginner with Labview 2009 and am trying to interface my Keithley 2701 with an Ethernet connection. I can access the instruments internal web page and successfully use the interactive control panel so I don't think my computer is having a problem connecting to the instrument. When I run the Example VI's provided by Keithley/NI (obtained from the find instrument drivers) it works with a serial connection but when I connect with the Ethernet I get the Error: "Error -1073807343 occurred at VISA open in Keithley 27xx.lvlib: Initialize.vi". I have configured a TCPIP address through Keithley's configuration panel and the Keithley 2701 IP address shows up in the Example VI's as a port to communicate with yet fails when it tries to run the VI. If anyone has had any experience with this problem or may know how to solve it I would greatly appreciate the help.
Thanks!

I have tried to list the device in MAX. However the following is given:
"VISA returned this static device when finding resources, and MAX was able to use VISA to parse the resource name. MAX was not able to successfully open a VISA session to the device."
The following post says the MAX has an issue connecting to TCPIP ports
http://digital.ni.com/public.nsf/allkb/92D475E7246846E786256ED700556D98
I am currently trying to run the VI given in the page above but as of now I keep receiving the same error message.
Thanks.

Link errors on HP Itanium and Oracle 9.0.1.0.1 Developers Release

We have pulled down the Oracle Developers release for HP-UX 11.22 and were not able to compile the Oracle code
because of a link error. We are getting the following errors in the make.log file:
(Bundled) cc: error 1913: `16M' does not exist or cannot be read
(Bundled) cc: error 1913: `L' does not exist or cannot be read
(Bundled) cc: error 1913: `1M' does not exist or cannot be read
(Bundled) cc: error 1913: `1M' does not exist or cannot be read
*** Error exit code 1
Stop.
Has anyone run into this issue and how was it resolved?
Thanks,
Walter

Alex,
does a
select xmlelement("SQLX", 'Hello ,World!') from dual; work?
SQL> select xmlelement("SQLX", 'Hello World!') from dual;
XMLELEMENT("SQLX",'HELLOWORLD!')
<SQLX>Hello World!</SQLX>
It works for me in 9.2
SQL> select xmlelement("orderid", order_num) from orders;
XMLELEMENT("ORDERID",ORDER_NUM)
<orderid>1</orderid>
<orderid>2</orderid>
<orderid>3</orderid>
<orderid>1</orderid>
<orderid>2</orderid>
<orderid>3</orderid>
6 rows selected.
SQL>

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

Build Collada DOM 2.2 in X-Code and got _unZOpen, Close a link errors

I am trying to build Collada DOM 2.2 in XCode and getting following link error.
Collada DOM is providing minizip (library) which contains zip.h and unzip.h, which is called after calling mac libraries; Is any way I can specify in XCode project build specifications to read minizip from Collada first?
Building target “viewer” of project “viewer” with configuration “Debug” — (8 errors)
"_unzGoToNextFile", referenced from:
daeZAEUncompressHandler::extractArchive(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzGetCurrentFileInfo", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzCloseCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzOpenCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzReadCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzGetGlobalInfo", referenced from:
daeZAEUncompressHandler::extractArchive(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzClose", referenced from:
daeZAEUncompressHandler::~daeZAEUncompressHandler()in libdom.a(daeZAEUncompressHandler.o)
"_unzOpen", referenced from:
daeZAEUncompressHandler::daeZAEUncompressHandler(daeURI const&)in libdom.a(daeZAEUncompressHandler.o)
Your help greatly appreciated.
Thanks

Please look into following link
https://sourceforge.net/forum/forum.php?threadid=2643729&forumid=531263

Reinstalling AE and PP due to an error with dynamic link. Where do i find the program install? And tips on how to reinstall without messing things up? last question is, does my recent files and saves work after the reinstall?

I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
And tips on how to reinstall without messing things up?
last question is, does my recent files and saves work after the reinstall?
Thank you

karianne wrote:
I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
Which versions? Which operating system?
Try Download and Installation Help

Virtual Connect Manager Status and Stacking Link Error

I have three C7000 Enclosures / chassis running on each environment, each chassis have a redundant VC (Flex-10 Enet) bay 1-2 and ( 8Gb 24-Port FC ) Bay3-4, everything seem working but there is a Domain status and stacking link errors "One or more of a domain's subsystems are not properly operating, causing serious impact to domain functions." and "Some VC-Enet modules are not properly connected via stacking links please verify stacking cable connections"

Sorry, but your question is far beyond the intended scope of the Global Consumer support forum. I suggest posting this to the HP Enterprise business forum.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

About jsafe and unsatisfy Link Error?

After I install weblogic5.1 on hp-unix11.0,I can start it,but I found a problem
with the process of the start:some exception report:jsafe...,and unsatisfied Link
Error?I wonder what's the matter?
Any answer will be appreciate!thanks

Make sure that you have the latest service pack. You can safely ignore this
message.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"matileean" <[email protected]> wrote in message
news:3ad27036$[email protected]..
>
After I install weblogic5.1 on hp-unix11.0,I can start it,but I found aproblem
with the process of the start:some exception report:jsafe...,andunsatisfied Link
Error?I wonder what's the matter?
Any answer will be appreciate!thanks

Apple Mach-O Linker errors and I don't know what to do

I cannot compile my project for the device or simulator anymore. I get 13 Apple Mach-O-Linker errors. It all started after I failed attempt to use sharekit. Here is the log from the error:
ld: warning: directory not found for option '-F/Users/bbrandy95/Documents/Broken Brandsonic Web Projects/Brandsonic Web mobile/../../Downloads/0.2.1gm1/iphoneos4.0/System/Library/Frameworks'
Undefined symbols for architecture armv7:
"_OBJC_CLASS_$_NSURLRequest", referenced from:
      objc-class-ref in Brandsonic_Web_mobileAppDelegate.o
      objc-class-ref in Brandsonic_Web_mobileViewController.o
"_OBJC_CLASS_$_NSAutoreleasePool", referenced from:
      objc-class-ref in main.o
"_objc_msgSendSuper2", referenced from:
      -[Brandsonic_Web_mobileAppDelegate dealloc] in Brandsonic_Web_mobileAppDelegate.o
      -[Brandsonic_Web_mobileViewController didReceiveMemoryWarning] in Brandsonic_Web_mobileViewController.o
      -[Brandsonic_Web_mobileViewController dealloc] in Brandsonic_Web_mobileViewController.o
"_objc_setProperty", referenced from:
      -[Brandsonic_Web_mobileAppDelegate setWindow:] in Brandsonic_Web_mobileAppDelegate.o
      -[Brandsonic_Web_mobileAppDelegate setViewController:] in Brandsonic_Web_mobileAppDelegate.o
"__objc_empty_vtable", referenced from:
      _OBJC_CLASS_$_Brandsonic_Web_mobileAppDelegate in Brandsonic_Web_mobileAppDelegate.o
      _OBJC_METACLASS_$_Brandsonic_Web_mobileAppDelegate in Brandsonic_Web_mobileAppDelegate.o
      _OBJC_CLASS_$_Brandsonic_Web_mobileViewController in Brandsonic_Web_mobileViewController.o
      _OBJC_METACLASS_$_Brandsonic_Web_mobileViewController in Brandsonic_Web_mobileViewController.o
      _OBJC_METACLASS_$_SecondView in SecondView.o
      _OBJC_CLASS_$_SecondView in SecondView.o
"_objc_msgSend", referenced from:
      _main in main.o
      -[Brandsonic_Web_mobileAppDelegate application:didFinishLaunchingWithOptions:] in Brandsonic_Web_mobileAppDelegate.o
      -[Brandsonic_Web_mobileAppDelegate dealloc] in Brandsonic_Web_mobileAppDelegate.o
      -[Brandsonic_Web_mobileAppDelegate GOOGLE] in Brandsonic_Web_mobileAppDelegate.o
      -[Brandsonic_Web_mobileAppDelegate YOUTUBE] in Brandsonic_Web_mobileAppDelegate.o
      -[Brandsonic_Web_mobileAppDelegate WIKI] in Brandsonic_Web_mobileAppDelegate.o
      -[Brandsonic_Web_mobileViewController webView:shouldStartLoadWithRequest:navigationType:] in Brandsonic_Web_mobileViewController.o
"__objc_empty_cache", referenced from:
      _OBJC_CLASS_$_Brandsonic_Web_mobileAppDelegate in Brandsonic_Web_mobileAppDelegate.o
      _OBJC_METACLASS_$_Brandsonic_Web_mobileAppDelegate in Brandsonic_Web_mobileAppDelegate.o
      _OBJC_CLASS_$_Brandsonic_Web_mobileViewController in Brandsonic_Web_mobileViewController.o
      _OBJC_METACLASS_$_Brandsonic_Web_mobileViewController in Brandsonic_Web_mobileViewController.o
      _OBJC_METACLASS_$_SecondView in SecondView.o
      _OBJC_CLASS_$_SecondView in SecondView.o
"_OBJC_CLASS_$_NSObject", referenced from:
      _OBJC_CLASS_$_Brandsonic_Web_mobileAppDelegate in Brandsonic_Web_mobileAppDelegate.o
"___CFConstantStringClassReference", referenced from:
      CFString in Brandsonic_Web_mobileAppDelegate.o
      CFString in Brandsonic_Web_mobileAppDelegate.o
      CFString in Brandsonic_Web_mobileAppDelegate.o
      CFString in Brandsonic_Web_mobileViewController.o
      CFString in Brandsonic_Web_mobileViewController.o
      CFString in Brandsonic_Web_mobileViewController.o
      CFString in Brandsonic_Web_mobileViewController.o
"_OBJC_CLASS_$_NSKeyedUnarchiver", referenced from:
      objc-class-ref in Brandsonic_Web_mobileViewController.o
"_OBJC_CLASS_$_NSUserDefaults", referenced from:
      objc-class-ref in Brandsonic_Web_mobileViewController.o
"_OBJC_CLASS_$_NSURL", referenced from:
      objc-class-ref in Brandsonic_Web_mobileAppDelegate.o
      objc-class-ref in Brandsonic_Web_mobileViewController.o
"_OBJC_METACLASS_$_NSObject", referenced from:
      _OBJC_METACLASS_$_Brandsonic_Web_mobileAppDelegate in Brandsonic_Web_mobileAppDelegate.o
      _OBJC_METACLASS_$_Brandsonic_Web_mobileViewController in Brandsonic_Web_mobileViewController.o
      _OBJC_METACLASS_$_SecondView in SecondView.o
ld: symbol(s) not found for architecture armv7
clang: error: linker command failed with exit code 1 (use -v to see invocation)
How do I fix this? Please help.

Is XC 4.2 installed into the default location /Developer ...?

Keithley 2701 and _KE2700_in​itwithopti​ons LINK error

Similar Messages

Maybe you are looking for

Keithley 2701 and _KE2700_initwithoptions LINK error