Kernel and ABAP + Basis Components Versions

Hello All,
Can any 1 please give me detailed information on ABAP + BASIS components and Kernel version from R/3 4.6 to the latest NW systems version.
Few things about which i am clear is(please correct me if i am wrong below)
Initially ABAP ENGINE=ABAP + BASIS
From ECC6 (i.e, from NW) ABAP + BASIS + BI will form ABAP Engine
From NW its ABAP + JAVA
So i need to know now about the Kernel and ABAP + Basis Components Versions
Please help
Regards,
Ravi

Hi
To know the JAVA components in SAP
============================
http://<Hotname>:5<Instancenumber>00 got to System informations-->software components there
you can see all the installed JAVA components
To know the ABAP components in SAP
=============================
Menu bar system>status> software components there you can find the installed software
components in youre SAP
Check SM51-->Release notes there you can find information of your kernel
kernel information you can check from Os level
start>cmd> disp+work
Let me know if needed more information
Regards
Uday

Similar Messages

ABAP+Java Kernel and only Java Kernel

Hi Friends,
Is there any difference in ABAP+Java Kernel and only Java Kernel?
Can we use the kernel for above both from the same location as below?
1#
Support Packages and Patches> Additional Components> SAP Kernel> SAP KERNEL 64-BIT UNICODE> SAP KERNEL 6.40 64-BIT UNICODE
Following Files
DB Dependent - ORACLE
          SAPEXEDB_175-20000227.SAR
          DBATL640O92_44-20000227.SAR
Database Independent
          SAPEXE_175-20000226.SAR
Assuming above SAR files contain R3trans, R3load, tp ,... also.
2#
As per my knowledge SAP has given one more path to download J2EE SP's which contains Kernel and J2EE Support Packages.
http://service.sap.com/patches --> Support Package and Patches -> Entry by Application Group -> SAP NetWeaver -> SAP NetWeaver -> SAP NetWeaver 04 -> Entry by Component -> Application Server Java -> SAP J2EE Engine 6.40 -> J2EERT19_0-10001982.SAR/J2EERT20_0-10001982.SAR (OS Independent) and CTRLDB219_0-20000114.SAR(OS Dendependent)
What is the difference between above two kernels?
1# contains R3trans, R3load, tp ...etc which is exclusively used by ABAP Stack related functions. The startsap script used here would check R3trans -d authentication successful before starting database and then only it starts the database from sidadm. I observed OPS$ users available in only ABAP schema SAPSID but not available in SAPSIDDB. If I use the kernel downloaded from 1# for Java Stack only system, startsap would fail as R3trans authentication fail as there is no ABAP schema in Java systems.
This applies well for ABAP+JAVA or only ABAP based systems.
If I use only JAVA Stack based system can I use the kernel downloaded from 1# . What is the kernel and SP available in 2#? Is this also contains the same kernel given in 1# or it is different. I also observed in JAVA they are not calling Kernels by Patch No like 154, 175... they call it by SP19. Please correct me if I am wrong.
Did anyone come accross this type if issue? I would appreciate if anyone can clarify my questions given above.
My main target is to have clear strategy for ABAP+JAVA, ABAP, JAVA kernels to avoid mess up. Which one to download? What is best practice? Differences?
Thanks and Regards
Prasad

Hi Sacha,
Thank a lot for your answer I am clear now. Before rewarding points to you.
I have final question.
You mean that there is not seperate kernel for Java Stack Systems.. When we apply SP11 or SP19 by default it applies Kernel and also support packages w.r.t the SP. Do we have option to seperate Kernel and Support package while applying SP's for Java System?
If we take for example SAP NW 2004 (WAS 640) latest kernel is 175 (I mean ABAP+JAVA). If I want to know the latest kernel for Java Stack system, Do I need to say it is at level SP19 or check the sapwebdisp -V (Resepctive patch level)?
For ABAP system we check disp+work -V to get the source kernel version. How to justify the source kernel version for Java System?
As per SAP Note: 710914 - Upgrading the J2EE Engine Startup Framework after applying SP for Java System, Do we need to upgrade J2EE Startup Framework?
Thanks and Regards,
Prasad

BAPI to get kernel and IGS version

Hi,
I am new to ABAP and I want to write an ABAP program that I can run , for example, in solution manager system, to get the kernel and IGS version of a remote ABAP system.
Is there a standard function module that can do that ?
Thank you for your help
Chak
Edited by: chak on May 20, 2010 9:00 PM

Hello,
actually it's been already written : )
You can execute following report via se38:
GRAPHICS_IGS_ADMIN
Regards,
Serhat

HT201413 I am running Windows 7, ITUNES 10.6.3.25. I am unable to see my Iphone/sync my iphone in Itunes. I have uninstalled all components of Itunes and downloaded the newest version to no avail. Please help.....Thanks

I am running Windows 7, ITUNES 10.6.3.25. I am unable to see my Iphone/sync my iphone in Itunes. I have uninstalled all components of Itunes and downloaded the newest version to no avail. Please help.....Thanks
I am attaching the Diagnostics data below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron N7010
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0016AA9C0126E318
Current user is not an administrator.
The current local date and time is 2012-07-05 11:42:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod (5th generation) running firmware version 1.3
Serial Number: 8L643QK9V9R
iPhone 4 (CDMA) running firmware version 5.1.1
Serial Number: C8RG57F0DDP8
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

Netweaver Data base instances for Java and ABAP

Hello Experts,
Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
If yes..the any idea about what are those schema differences??
- Rajan

Hello Krishna,
Thanks for the reply.
Is there any way I can access these shemas? Are they the same by structure or there are major differences?
My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
Any help will be greatly appreciated.
- Rajan

Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition

Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
Thanks & Best regards,
Jeroen Engelen
SAP Netweaver Technology consultant

Hello all,
You have to follow instruction on this side>
http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
YOu need to download
part1 > which is soft from NOvell called
SAP Test Drive "SLES10SP1VSAP.rar"
Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
After donwload from sdn part two
SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
from sdn Downloads.
YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
So at this point I am stuck
Here is the same qeustion from Jim Jiang and me
what is user name and password for SLES10 SP1 SAP Version
Hope this give you overview what needs to be done, to start up Trial SAP version
Peter Nechala

1159 on RHAS3 kernel and glibc version question

Hi all,
Fresh install of RHAS3, output of uname gives me
2.4.21-20.ELsmp
1159 installation update notes mention kernel required version as being 2.4.21-4.EL
Is this OK? Do I need to upgrade kernel? Where do I get the rpm for this?
Output from rpm -q glibc gives me
glibc-2.3.2-95.27
1159 installation update notes mention required version as being 2.3.2-95.3
Again, is this OK? Where do I get the rpm for this?
Regards, thanks

Check
Note 958253 - SUSE LINUX Enterprise Server 10: Installation notes
Note 797084 - SUSE LINUX Enterprise Server 9: Installation notes
Check there both the "Kernel" and the "glibc" section.
Markus

SAP NetWeaver7.0-Java and ABAP trial version on linux. login problem

Hi all.
The following programs SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition installation.
Written by Mr. Gregor installation at https: / / SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition - Tips & Tricks
Note.
As I write programs that install the setup screen appeared normal. But username: root, password: sap123 is wrong. Ejected.
What is the problem?
Pls reply..
Best regard.

oh~ dear it's noncense $-(
found it.
username:root password:root
have a nice day.

The vm and host networking components failed to negotiate protocol version '4.0'

Hi,
I have the problem that when I start a VM with windows server 2012 on a hyper-v v2 host, it takes very long till the VM get bind the static or dynamic ip adress. I tried both, static and dynamic. In every case I see at the event viewer the following error:
the vm and host networking components failed to negotiate protocol version '4.0'
After a few minutes the VM gets bind the IP an everything works fine. But at the next time I reboot the machine the same failure appear.
Trying to use legacy network adapter results in the same problem. After this I tried to export the vm to a hyper-v v3 host. At first boot time
the problem didn't appear and the vm get's bind the ip adress without problems. Then after upgrading the integration services to hyper-v v3
version the same problem appears but without register it in the event viewer.
Does anybody know how I can fix this problem?
Kind Regards,
Marcus

Hi,
A MS KB records an issue when you run Windows 8 or Windows Server 2012 based Virtual machine in Windows Server 2008 or in Windows Server 2008R2:
http://support.microsoft.com/kb/2744129
There is a Microsoft update in this KB, you may install this KB in your Windows Server 2008 R2 and check the result.
While about this issue after you migrate the guest VM to Windows Server 2012 host, will it still has such error message after you remove all network adapters of the guest VM?
Install Windows update for the Hyper-V host, after that upgrade Integration service for the guest VM again to check the result.
For more information please refer to following MS articles:
"Unsupported configuration" warning when you run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
http://support.microsoft.com/kb/2737297
Hyper-V Overview
http://technet.microsoft.com/en-us/library/hh831531.aspx
Lawrence
TechNet Community Support

Version Mismatch for Kernel and CPU after 10.6.4 update

I had a kernel panic in both Mac Pro and MacBook Pro after a usually no-brainer software update OS X 10.6.4....I tried all of the shortcuts (zapping PRAM, booting from other drives, safemode, etc) and I get the dreaded gray screen and restart message immediately,,,what can I do short of purchasing a new board for each machine?
I did disk verification and repairs via target disk mode from a third laptop, but the pro macs never get past the grey screen in order to give me the chance to update! The screen text says:
"panic(cpu 0 caller 0x2x096e6) Version mismatch between Kernel and CPU PM"@/Source Cache/...
Debugger called: <panic>"
What can I do to GET PAST the "version mismatch" and "ned to restart" screen to be ABLE to update?

Just tried installing the 10.6.4 update on my iMac i5. It began the usual shutdown, and I was expecting the install to begin. That never happened. 10 minutes went by at least. I forced it to shut down, and now it won't boot. Same as the OP - "Version mis-match between Kernel and CPU PM"
There is no option to boot from anything else, either. The machine won't boot from an original install CD, or from an install image I keep on USB. I tried zapping PRAM, and resetting SMC. At this point, I consider it bricked. Fortunately, I have a reasonably recent TM backup.
Won't have time to take it in until Monday. Sure hope someone has some insight before then.

The VM and host networking components failed to negotiate protocol version '5.0'

I have been searching for a fix for this issue for sometime.
The VM and host networking components failed to negotiate protocol version '5.0'
and
The VM and host networking components failed to negotiate protocol version '4.0'
this error have been posting on the host server 2008 R2, with a hyper-V running server 2012 R2, which is the eval version vhd from Microsoft.
I have tried the patch on the server 2008 R2 host and the nic delete and rescan option with varied reboots and such between each step of the process just to try every possible combination.
The error persists. Are there any other suggested solutions for fixing this problem. Also the drivers have all been updated along with the system firmware.
thanks,

The hotfix states Server 2012 in the VM. You stated Server 2012 R2 in the VM. MSFT is very precise in this language - Server 2012 != Server 2012 R2.
Two distinctly different releases of Windows Server.
In this case the N = the running release of Hyper-V. In this case your Hyper-V Server at release version 2008 R2.
The +2 = the current version of Windows. In this case that is 2012 R2. Two releases ahead of the version of the hypervisor you are running.
I tossed in the link to Ben Armstrong's blog article as that is the ONLY (and still definitive statement) support statement regarding this configuration. He posted that article at my request after many folks posting in this forum with strange behavior
in this configuration.
"supported" in this context means that if you call CSS, you will be told the following: 'yes, you have errors in the event log. We will not fix that. This is an unsupported configuration. But that does not block the OS in the
VM running. If you want the errors to go away, we suggest you upgrade your Hyper-V Server to 2012 R2. That configuration is supported.'
That said, it can impact other functionality of the VM that rely on Integration Components in the VM and the Services of the hypervisor. There is most likely small things that will not work.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Regarding full authorization except basis and abap

Hello Gurus,
I want to provide full authorization to my super users excluding Basis and ABAP transactions such as PFCG,SU01,STMS,SCXX,SEXX. Is it possible by providing some standard profile? If yes then which profiles are that? and if no then how to solve this problem.
Please reply if u can.
Thanks and Regards,
Jayendra
email - [email protected]

Hi Jayendra,
You copy SAP_ALL to some ZSAP_ALL role and remove what ever the Transactions you want to remove from ZSAP_ALL.Then you assign this role to all your super users.
Regards,
Hari.

CRC failed in Java and ABAP Trial Version on Linux - VMware Edition part02

I download SAP NetWeaver 70 - Java and ABAP VMware Trial and I couldn't install it because part02 rar file has reported a checksum error.
- SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC failed in SLES10SP1_Test_Drive(2)-s003.vmdk. The file is corrupt
Also, I think file SLES10SP1_Test_Drive.vmdk is missing from the archive files.
Could you please, confirm that the archives in the sdn downloads are correct!

I also have the same problem, CRC error:
X:SAPSAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC hiba a SLES10SP1_Test_Drive(2)-s003.vmdk-ban. A fájl sérült

[syntax_error] in Creating New User - After applying SP ABAP & Basis lv 8

Hi Gurus.
actually I already created message to SAP regarding this. but i havent receieve any respond. I post here just in case maybe I can have immediate solution from you guys..
I have 2 system HLC and MFG
which is using same OS and DB
DB Information
DB client lib.     SQL_Server_8.00
DB releases        MSSQL 7.00.699 or higher, MSSQL 8.00.194
DBSL version       700.08
DBSL Patch Level   144
System Information
SAP versions       700
Operating System   Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Wi
OP release         5.2
which have same Kernel and SP patches
Kernel release    700
Sup.Pkg lvl.      146
SAP_ABA     700     0008     SAPKA70008
SAP_BASIS     700     0008     SAPKB70008
ST-PI 2005_1_700     0006     SAPKITLQI6
PI_BASIS     2005_1_700     0005     SAPKIPYJ75
Problem
previously both of the system HLC and MFG is in level 6 SP ABAP and BASIS
when i try to create EWA report for both of them, i have missing module in the report
and i read a note that i need to upgrade to level 8.
when i upgrade both of them to level 7, then i run sgen and there are no problem on both system
but when i upgrade both of them to level 8
in my MFG system, i can run sgen with no problem.
in my HLC system, i run sgen and it take a long time to validate the programs which are need to be recompiled. so i never run sgen to recompile on HLC system after i update the SP to level 8. but i believe this shouldnt be an issue.
the day after i update the SP, one of my user raise an issue.
(same issue is not happened in MFG system only in HLC system)
when we try to create new user..
SU01 -> create new user -> fill all the details -> save -> abap dumps
Error in the ABAP Application Program
The current ABAP program "/SAPSLL/CL_IM_BP_ADDRESS======CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/SAPSLL/SAPLBP_ADDRESS " in
   include "/SAPSLL/LBP_ADDRESSTOP " in
line 22:
"Statement "/SAPSLL/DEBUG_DATA" is not defined. Check your spelling . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "

Hi all
problem is solved..
after doing some debugging, we found out
there are some missing entries in table TRMAC
so i just copy the missing entries from my MFG server to HLC server since they are both in same condition.
now i am wondering why do the support package miss to enter the rows in TRMAC table >.<
SAPache man..

Setup and Configure IM Components SSO and DAS on Replica RMS Node

Dear All,
I was trying the step
Step 5: How to Setup and Configure IM Components SSO and DAS on Replica RMS Node In Multimaster Replication (MMR) with Identity Management (IM) Cluster in High Availability Env
But, at the stage to connect to OID, it is not connecting to the RMS database.
When I checked login through ODM, it is connecting fine. also, ldapbind is also binding fine.
How to solve this ? What will be the issue and where to check it ?
Also, from the RMS, when I am connecting through EM console, I am not getting any output on Infrastructure link to change the passwords. its showing
Identity Management
Error retrieving information of default metadata repository.
Unable to establish secure connection to Oracle Internet Directory Server ldap://devportal.paaf.gov.kw:636/ Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
If there is any experts, pls reply. Because, last time I created a TAR and it took months to resolve and ultimately nothing happened they closed the TAR after some time as I was busy with some other works and not able to proceed with the synchronization.
Thanks in advance,
With Regards,
Sheeja Anil

Rule [ 47 ]: fuser link
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the fuser symbolic link /sbin/fuser -> /bin/fuser exists or
not. This is required for Suse 8.0 and Suse 9.0.
Test [ PASSED ] :
Not required =~ Exists|Not required
Action:
fuser link exists or not required.
Rule [ 48 ]: orarun package
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the orarun package is installed and if the oracle user
environment need to be reset. This is only required for Suse 8.0 and
Suse 9.0.
Test [ PASSED ] :
Not applicable =~ Not installed|Installed correctly|Not
applicable|Environment reset not required
Action:
orarun is not installed or installed correctly.
Rule [ 49 ]: semmsl
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmsl kernel parameter is 256 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmsl kernel parameter is 256 or higher.
Rule [ 50 ]: semmns
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmns kernel parameter is 32000 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmns kernel parameter is 32000 or higher.
Rule [ 51 ]: semopm
~~~~~~~~~~~~~~~~~~~
Description:
Check if semopm kernel parameter is 100 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semopm kernel parameter is 100 or higher.
Rule [ 52 ]: semmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmni kernel parameter is 142 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmni kernel parameter is 142 or higher.
Rule [ 53 ]: shmall
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmall kernel parameter is 2097152 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmall kernel parameter is 2097152 or higher.
Rule [ 54 ]: shmmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmax kernel parameter is 2147483648 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmax kernel parameter is 2147483648 or higher.
Rule [ 55 ]: shmmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmni kernel parameter is 4096 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmni kernel parameter is 4096 or higher.
Rule [ 56 ]: msgmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmax kernel parameter is 8192 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmax kernel parameter is 8192 or higher.
Rule [ 57 ]: msgmnb
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmnb kernel parameter is 65535 or higher. Refer to Oracle
Application Server 10g Installation Guide 10g - Chapter 4 - Section
4.3.3 Configuring the Kernel Parameters on Linux for more details on
how to configure this.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmnb kernel parameter is 65535 or higher.
Rule [ 58 ]: msgmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmni kernel parameter is 2878 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmni kernel parameter is 2878 or higher.
Rule [ 59 ]: file-max
~~~~~~~~~~~~~~~~~~~~~
Description:
Check if file-max kernel parameter is 131072 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
file-max kernel parameter is 131072 or higher.
Rule [ 60 ]: ip_local_port_range
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if ip_local_port_range kernel parameter is between 10000 and
65000 or higher. For more details on how to configure this parameter,
refer to Oracle Application Server 10.1.2 Installation Guide - Chapter
4 - Section 4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
ip_local_port_range kernel parameter is between 10000 and 65000 or
higher.
Rule [ 61 ]: limit processes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of max processes is set to 16384 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of max processes is set to 16384 or higher.
Rule [ 62 ]: limit descriptors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of file descriptors is set to 65536 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of descriptors is set to 65536 or higher.
Rule [ 63 ]: Port 1521
~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if port 1521 is free or not. If port 1521 is used by an Oracle
listener version 10.1.0.2 or later, then the existing listener will be
used by the existing database and the Oracle Application Server 10g
Metadata Repository. The installer will perform this configuration
automatically. If port 1521 is used by an Oracle listener version
earlier than 10.1.0.2, then the existing listener need to be stopped.
After the installation is complete, the new 10.1.0.2 listener can be
configured to listen to the existing (pre 10.1.0.2) databases. If port
1521 is used by non-oracle programs, then this program need to be
configured to listen to ports other than 1521. Refer to Installation
Guide, section 4.4.4 for more details.
Test [ PASSED ] :
TNS Listener 10.1.0.2 or higher is running =~ TNS Listener 10.1.0.2 or
higher is running|Free
Action:
Port 1521 is not used, or is used by TNS*Listener version 9.0.1 or
higher.
Rule [ 64 ]: Environment Variables
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the following environment variables are not set: TNS_ADMIN,
ORA_NLS, and LD_BIND_NOW. In addition, the following environment
variables must not references to any existing Oracle Home: PATH,
CLASSPATH and LD_LIBRARY_PATH.
Test [ FAILED ] :
Has reference to existing Oracle Homes = Properly defined
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value          Action
Has reference to existing     Remove any reference to existing
Oracle Homes          Oracle Homes from PATH, CLASSPATH
                    and LD_LIBRARY_PATH.
Some variables are set     Unset TNS_ADMIN, ORA_NLS, and
                    LD_BIND_NOW.
Cannot access /etc/oratab     Grant read permission on
                    /etc/issue to the current user.
</PRE>
Rule [ 67 ]: DNS Lookup
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the host is properly registered in the DNS.
Test [ FAILED ] :
nslookup IP_address = Host correctly registered in DNS
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value          Action
nslookup host.domain     The DNS server failed to resolve the
                    nslookup using host.domain.
nslookup IP_address     The DNS server failed to resolve the
                    nslookup using IP address.
Cannot determine IP address Fix any problem with host IP address.
Cannot access          Grant execute permission on
/usr/bin/nslookup      /usr/bin/nslookup to the current
                    user.
</PRE>
Rule [ 68 ]: /etc/hosts format
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if /etc/hosts file contains a line with "ip_address
fully_qualified_hostname short_hostname".
Test [ PASSED ] :
Contains host.domain = Contains host.domain
Action:
The Fuly Qualified Domain name has been set correctly.
Rule [ 69 ]: Oracle Home length
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check that the path to the Oracle home directory is not longer than
127 characters.
Test [ PASSED ] :
Less than 127 char = Less than 127 char
Action:
Oracle Home directory is not longer than 127 characters.
Rule [ 70 ]: Memory for Dev Kit
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Developer Kits
install type. The minimum requirements is 256 MB.
Test [ PASSED ] :
Available = Available
Action:
The machine has enough memory to install J2EE & Webcache install type.
Rule [ 71 ]: Memory for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Business
Intelligence & Forms install type. The minimum requirements is 1 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough memory to install Business Intelligence & Forms
install type.
Rule [ 72 ]: Space for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough disk space to install Business
Intelligence & Forms install type. The minimum requirements is 2 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough disk space to install Business Intelligence &
Forms install type.
Rule [ 73 ]: control-center
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required control-center package version is
installed. For RedHat AS/ES 4.0: control-center-2.8.0-12.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed.
Rule [ 74 ]: xscreensaver
~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required xscreensaver package version is
installed. For RedHat AS/ES 4.0: xscreensaver-4.18-5.rhel4.2.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed.

Kernel and ABAP + Basis Components Versions

Similar Messages

Maybe you are looking for