Key Figure Doubt

Hi,
Anybody can help me regarding following doubt
Restricted Key figure-Key figure having some restriction
Calculated Key Figure and Formula -Doubt that both are same or different.

rajesh.behera wrote:
Hi,
>
> Anybody can help me regarding following doubt
>
> Restricted Key figure-Key figure having some restriction
> Calculated Key Figure and Formula -Doubt that both are same or different.
Restricted KF
Giving restriction to a Key Figure value based on a Charactorstic value
Eg. We want to see all Order Value (KF) which comes under 0plant = 100
Here we have given restriction to KF which shows only Order Value is 0plant = 100.
Calculated KF
Deriving a KF value based on existing KF,this is global which be reused for any other report which create on top of your info provider.
Eg. We want to provide 10% hike on existing Basic salary to employees
Gross Salary = Bsal+10% of Bsal ... He Gross Salary is not available but it has been derived by using Calculated KF
Best Regards
BVR

Similar Messages

Customer Ext Variable is NOT working correctly in the Restricted Key Figure

Hi all,
   I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
    0CALMONTH and it will be populated through Customer Exit and it works fine.
    In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
    variable passed the value of range as '01/1996' to '04/2008' in RSRT.
    The properties of the variable are:
          Type of Variable - Characteristic, Processing by - Customer Exit, Variable Represents - Interval
          and Variable is - Optional.
          No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
This variable is used in Restricted Key Figure to calculate the number of matching records between
   01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
   But, there are records with 0CALMONTH between 01/1996 & 04/2008.
   How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
   Thanks in advance.
Regards,
Venkat.

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Map Datasource field NUMC to Cube Key Figure

Hi ,
How do we go about mapping a NUMC field from the datasource to a Key figure(DEC) in an InfoCube?

Hi Ravi,
Thanks for your answer, first i unmapped in transfer rules as per your sugession and executed the infopackage but the data has come when i was unmapped in update rules the data has not come.
My doubt is when i was unmapped in TR even though the data has come, so what is the use of unmapped here.
and how to unmapped char
please clarify my doubt
David
Edited by: david Rathod on Jul 22, 2010 5:40 PM

Mapping of BI Key figures to BPC Amount

Hi All,
I want to know that how do we map the key figures in BI cube to BPC Amount.
I have also gone through Pravin Datar's Blog ( /people/pravin.datar/blog/2009/04/16/loading-transactional-data-from-any-infocube-to-bpc-application-in-bpc7nw
) regarding it but didn't find the solution.
All the key figures are suggested to be mapped to Amount, but it will not work as whole data will come in amount only. So please suggest me
1. how to proceed with the mapping of different key figures in BI to BPC Amount.
2. Also do we have to create a seperate dimension to hold all these key figures.
Please help me in above doubts.
Thanks in advance
Sanjay

HI sanjay,
Are you talking about the situation in which multiple key figures are to be mapped to single Signdata in BPC?
if that is the case, there is a possibilty in BI where u can create BI cube with single keyfigure and load the data to it by using rule groups option in BI transformations. fields can be transformed below manner.
BI cube with multiple KFs.
Field 1     Field 2     Fin year end     Quarter     M1     M2     M3
B     IN     2008     1     100     50     80
D     US     2008     2     150     200     250
C     ZY     2008     3     75     450     55
Transformed BI cube structure
Field 1     Field 2     Fin year end     Quarter     Month     KF
B     IN     2008     1     4     100
B     IN     2008     1     5     50
B     IN     2008     1     6     80
D     US     2008     2     7     150
D     US     2008     2     8     200
D     US     2008     2     9     250
C     ZY     2008     3     10     75
C     ZY     2008     3     11     450
C     ZY     2008     3     12     55
this can be achieved using Rule groups technique in BI transformations
Thanks,
Kavya

Trouble with Non Cumulative Key Figures

Hi all of you,
I am working on Non Cumlative Key Figures, (NCKF). I have the data like this
Sales rep S100 visited SHOP S1 on 1st Jan and 10th Aug, and transacted worth 100 and 500
SHOP S2 on 1st Mar and 1st July and transacted worth 200 and 300
SHOP S3 on 3rd Sept. and transacted worth 400
Sales rep S200 visited SHOP S1 on 1st Jan and 1st Aug and transacted worth 100 and 300,
visited SHOP S2 on 1st April and transacted worth 200
I created Non Cumulative Key Figure in the following manners:
In modeling in InfoObjects I double clicked on my key figure BILLAMT and selected the Aggregation tab. I selected Counter (all values) for Exception aggregat. By default Agg. Referen. Char was 0calday. I then activated the info object and went to BEx. Here I took other IOs like Salesrep, Shop NUM and Dt. Of trans in rows and Bill amt in columns and executed the report. I am not getting the output how it should come for NON cumulative key figures.
But when I right click the key figure Bill Amount in BEx in change query mode and select properties. I go to the option Calculate result as and selected the option as Count all values. And in another option Calculate Single Value as I selected the option Count all values. I said OK, saved the query and executed it. Now the output is similar to how it comes for a Non Cumulative Key Figure query but I am unable to understand the output.
Now my doubt is where do we set the properties for Non Cumulative Key Figures? Is it in the Administrator Workbench under Modelling under InfoObjects?
OR
Is it in BEx change query mode by right clicking on the key figure and selecting properties?
Please explain.
Thank you
TR.

As for the setting for Non Cumulative key figures...the default setting is done in the Key Figure properties, where u can define the Exception Aggregation. This property is used as such in the query, but if suppose u are getting the normal aggregation in the query , what you could do is "Create The Key Figure as Global Calculated Key Figure in Bex" and go to properties...click on the Button for aggregation ..select the aggregation and define with respt to 0CALDAY ..here.
Hope this helps.

Modelling a non-cumulative key figure.

Hi All,
   I have a requirement like given below. I feel a non-cumulative key fig serves my purpose. But i m not geting exactly how to model it.Pls give u r suggestions onnhow to do it?
   i got chars C1,T1 and key figures K1,K2.
C1 IS A CUSTOM CHAR.
T1 IS A 0CALDAY TIME CHAR.
K1 IS A CUMULATIVE KEYFIG( NORMAL KEYFIG).
K2 IS ALSO NORMAL KEYFIG. ITS VALUE IS CONSTATNT FOR ENTIRE MONTH.
e.g Data.
C1   T1   K1   K2 ( constant value for jan). K3
X1   Y1   10    100                                  100-10=90.
X2   Y1   30    100                                   90-30=60.
X3   Y2   20    100                                   60-20 = 40.
C1   T1   K1   K2 ( constant value for FEB). K3
X1   Y1   10    200                                  200-10=190.
X2   Y1   30    200                                  190-30=160.
X3   Y2   20    200                                  160-20 =140.
According to above logic i need to derive K3.
My plan is that make k3 as non-cumulative w.r.t K2.
my doubts r
1) How to laod that initial value ( 100,200).
2) As Initial value changes for each month, how to model this? i.e for january it is 100. so for january my initial value is 100. then for February it is 200. so for feb my initial value is 200. How to model these?
3) Is this approach is correct or is there any other way to do this?
Points will be assigned to useful answers.
Thanks in advance.
Regards,
Ramana.

Hi Gurus,
   I m waiting Egerly for u r replies.
Regards,
Ramana.

How to block key figure value input in DP?

Hello everyone!!
I need to create a way to block the input of value in some key figures in some planning books in DP.
I tried to create a macro to block cell input - CELL_INPUT(XXX) = 0 - , but unfortunately it doens´t work, because I have another macro (default) that keeps one cell of the entire row opened to the user insert the values.
I can not put the "closing" macro as an interactive macro in the planning book, because, only one user is able to execute the macros, not all of them. And I also can not take off the other macro from the default event or change in the design mode of the planning book.
Does anybody know´s another way to do it?
Thanks a lot!!
Regards
Angela

Hello Visu
It´s not possible to create another planning book. They will have to use the same. But I have another solution. I´ll create this macro to block the values input in the determined row to be executed only for one user. This user will be the administrator, and only he would be able to execute this macro to block the other users.
But I have one doubt, how can I set the macro to be execute only by this user using the USER( ) function? The way I did it´s locking only this user, and it has to block all the others. The function user will be used only for the administrator.
The macro is like this:
IF
    USER ( 'AAA') = 1
    Line XXX (Attributes) =
        ROW_INPUT( 0 )
ENDIF
Best Regards
Angela
Edited by: Angela Christina Martelli on Mar 26, 2009 4:49 PM

Using Virtual Key Figures/ Characteristics is possible to use in InfoSets

Hi All,
Is it possible Using Virtual Key Figures/ Characteristics is possible to use in InfoSets?
I have tried all the possibilities using the BADI implementation RSR_OLAP_BADI without success.
The VKF / Characteristics works fine when it is being used with a query based on the ODS however it is not populated when i am using the infoset. Moreover i have used the code for InfoSet as well it is not working.
I would appreciate any help in this regard.
Regards
Noor

Hi PV,
r u sure about that, as i have tried all sort of permutation and combinations for using the same in RSR_OLAP_BADI without any luck.
I have the got felling about the same however if you look into the following SAP note it puts me into doubt.
Note 657690 - Virtual characteristics and key figures in InfoSets
Note 618738 - Virtual characteristics or key figures and InfoSets.
It describe about using the RSR00002.
Many thanks for the information.
Kind Regards
Noor

Key Figure Summation in DSO

Hi,
I am loading data from Cube to DSO.
In cube i have fields with 2 records below as example
f1=1 f2=2 f3=3 f4=4 and key figure k1=1
f1=1 f2=2 f3=3 f4=4 and key figure k1=1
In DSO all these f1's fields are key fields as per requirement. And when i load now i get in DSO as
f1=1 f2=2 f3=3 f4=4 and key figure k1=2
I do not want k1=2 but i want k1=1 in DSO and not sure why this is getting summed up even though i have selected overwrite in Transfer rules.
I have checked mapping and cube data. All are fine.
I just want to avoid this and do not know what to do.
A routine or formula or something else?
Please help.

Hi,
Check your DSO Design
Keep f1 ,f2, f3, f4, are in KeyFileds of DSO and Keep key figure k1 in DataFields of DSO.
Here I'm assuming that F1 to F4 are Charecteristics.And only K1 is Keyfigure. If this is the case then I hope it will work if you follw the above design.
Thanks
Reddy

Open sales orders key figure in APO

HI Gurus,
Can anyone please throw some light as to where i need to be looking in this scenario. Our BW resource extracts open sales order quantity from ECC and loads into APO DP. The issue that i'm seeing is the open sales order quantity key figure is not getting updated properly in APO. For example to begin with we have a quantity of 800 EA in the period of 12/2014 (we go by fiscal period and in this case 12 would represent September 2014), 01/2015(October 2014), 02/2015(November 2014). The customer service group has deleted the quantity completely from period 12/2014 (September 2014) in ECC. But when i look in the planning book in APO, i can still see the quantities in the periods of 12/2014, 01/2015 and 02/2015. I was expecting the quantity from the period of 12/2014 to not showup in APO as it has been deleted in ECC. Our BW resource also confirms that he has loaded it properly in APO. Where can i start looking to resolve this issue.
Thanks
Ravi

Dear Subhash, Thanks for your reply and i apologize as APO DP is new to me and i'm picking up things, can you please guide me to which tcode should i be going and checking this. Also reloading the planning area can you xplain a little more please
Okay i have checked in the tcode /SAPAPO/TSCUBE and this is setup in the process chain for us which runs once a month on the opening day of the period. I hope this is what you were referring to?
Under the key figure assignment in TSCUBE tcode, i see that the 'Add data" check box is not checked under Target area.

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

How can i display all the Coloumns (Key Figures) in the Report's same page

Hi All,
I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
Appreciates the Quick help/Response, please.
Regards
Ramana

In Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0. This will make all columns show instead of paginating as it is doing now.

Creation of new key figure at report level depending on the month range

Dear All,
I have a requirment where user wants to see the dollar values for the Amount key figure. Data is stored in the INR value in the cube.
Exchange rate values keep on changing depending upon the quarter. For all four quarters we have four different exchange rate.
Now system has to identify the applicable exchange rate and show a new column with the USD value just beside the INR values column.
How best we can achieve this.
Thanks & Rgds,
Anup

Hi
You can have currency translation at query level for achieving this.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/600157ec-44e5-2b10-abb0-dc9d06ba6c2f&overridelayout=true
Translation in Query
Regards
Ravi
Edited by: Ravi Naalla on Aug 17, 2009 11:56 AM

Date as a key figure

Hi Experts,
I defined date as a key figure, AAAAMMGG,Iu2019m able to view data in my ODS, but when I try to create a query data format is wrong.
Can anybody share a solution.
Thanks in advance
Namrata

Hi,
May be you are getting a number. What looks like your wrong format? If it is a number,display your figure with a formula, where you will find option to convert data to numbers and number to date.
Cheers,
Tanish

What is diffrernce between key figures and characteristics?

Hi all,
I am a newbie to SAP BI....i am doing Masters in ERP(SAP)....I have confusion about what is basic difference between key figures and characteristics?
Why do we have to define attributes in characteristics?
If any one can refer me a thread that answers my questions or explain with very lucid example I will highly appreciate it.....please answer this question as I have just spend 4-5 months studying BI and have not really implemented in the Industry but we do have access to SAP BI where we perform tutorials....
Also please let me know the links to materials where basics of BI are explained in a very simple way.....
Thanks,
Regards,
Rahul

KF is anything which can quantitatively measured: Amount, Number, Value, Price... whatever you want to measure is called Key Figure. This key figures are also called KPI (Key Performance Indicator). If you want to know the number of sales orders, the number of deliveries, the amount of deliveries... all are key figures
And to add to that, key figures are also divided into two:
Cumulative KF: Like I said, amount, value, price
Non-cumulative KF, this is different kind of key figures which shouldn't be summed up, for example: Age, Inventory, Number of Employees. When you measure this key figures, you don't add the age of every body, because that doesn't make any sense, but adding the sum of all deliveries, or adding all Sales does make sense, that is the difference between the two key figures.
Characteristics: are anything which couldn't be quantitatively measured: material, customer, plant, employee ID and so on...
Aways, in BI you measure the KF against the Key figures..
thanks.
Wond

Key Figure Doubt

Similar Messages

Maybe you are looking for