Key figure summation for KF IN different cube of a MP

Hi,
   I need to design a report on a Multiprovider. MP is based on two Cube Cube1 and Cube2.
   Cube 1 has field item and key figure total quatity.  Cube 2 has field item and key figure  quatity1.
   I need a report which will show
                  Item  quantity1  Total quantity   Percentage
Percentage = (quantity1/total quantity)*100.
I am surprised that percentage is X, though other two KF has value.
Is it the case that it is not possible to make summation, subtraction or any opeartion between two KF in different cube.
Could you please guide how to create percentage between two KF in different cube in a MP.
Regards
Deep

Hey Deep,
First confirm me what I understand... First you created a Mp which contains both KFs... Total quantity and Quantity one then in BEx query designer you created report in which you created a formula named "Percentage" and formula was (quantity1/totalquantity)*100... and in analyzer you are getting X instead of values. Then first try to check the properties of Formula (Percentage) in BEx query designer if decimal places etc are implemented and correct and second check if analyzer is reading these values as CHAR or Keyfigures and that you can check if there is a green arrow on left corner of each cell on both column's individual cells. If the green arrow kinda symbol is present there then it means that analyzer is not reading the values as CHAR thats why it is not doing any operation on both columns. Check these and let me know.

Similar Messages

  • How to create a non-cumulative key figure & How to make a info cube as so

    Hi Experts,
    How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
    Can any one kindly provide me the steps we need to performe?
    Thanks in Advance,
    Raj

    Hi Azael,
        In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
    Hope this helps!
    Regards
    Sriram

  • Key figure description for key figure YKFRFCFGD does not exist in liveCache

    Dear SAP Gurus,
    We have upgraded our APO 3.10 to SCM 5.1,
    Sopport Pack details:
    SAP_BASIS 700 16
    SAP_ABA 700 16
    ST-PI 2005_1_700 6
    PI_BASIS2006_1_700 6
    SAP_BW 700 18
    SAP_AP 700 13
    LCAPPS 2006_700 4
    EA-IPPE 400 13
    SCEMSRV 510 7
    SCM 510 6
    SCMBPLUS 510 6
    SCMEWM 510 6
    SCMSNC 510 6
    SCM_BASIS 510 9
    BI_CONT 703 10
    QIE 200 5
    ST-A/PI 01K_SCM500 0
    and Live cache 7.4.02.29 from to 7.7.03.23
    We facing following issue during APO operation in live cache.
    Error details:
    "Characteristic combinations with liveCache anchor but without time series"
    "Key figure description for key figure YKFRFCFGD does not exist in liveCache"
    "There is an inconsisteny between the key figure descriptions in liveCache and in the database. The key figure description of key figure YKFRFCFGD exists in the database but not in liveCache."
    Kindly help me out on this.

    Please execute Live cache consistecny check:
    for Planning area , check all the option.
    /SAPAPO/TS_LCM_CONS_CHECK
    MPOS:
    /SAPAPO/TS_PSTRU_CONS_CHECK            
    Manish

  • Key Figure Summation in Result Row with Cumulation Ticked

    Hi,
    I have a Bex question regarding the summation rows. 
    I need a Year To Date amount and a Period To Date amount in the report.  However, there is no Year To Date key figure available in the cube.  So in order to calculate YTD, I'm using the PTD key figure and have Cumulated box ticked mark in Bex. 
    All looks fine across columns per Vendor.  But the results row for the Cumulative Balance is always equal to the results row for Period Balances.  I believe this is because the same key figure is used, and it is only reading the amounts in the cube - not the ones calculated on the fly. 
    Does anyone know how to correct the results row for a cumulated key figure? 
    Regards,
    Rhonnie

    You have to create two restricted KF; one is PTD restricted to period; the second is PTD restricted in a period range from 01.yyyy to current period.
    Hope it helps.
    Regards

  • Key figure summation

    Hi All
    I searched SDN forums and could not find a solution for the same.
    I have added a keyfigure as display attribute in 0costcenter masterdata. The same is available as display attribute in headcount cube (0papa_c02) via 0mast_cctr. Now at the reporting level, the values for the key figure is not summing up at the node level for costcenter hierarchy as a normal functionality of display attribute. It works fine for normal key figures.
    So as a solution, I added this keyfigure in the headcount cube and populated the same via a routine from 0costcenter masterdata. The values are populating perfactly fine in the headcount cube. But the problem is that, as the headcount cube has multiple entries for the same costcenter, the values for the key figure is getting aggregated at the reporting level. I even tried using exception aggregation and non cumulative key figures to get the non aggregated value. But I am unable to solve this.
    Could you please guide me how can I acheive this. I know I can achieve this if I use an ods. But this will affect the whole design. Plaese suggest.
    Cheers
    Chanda

    Hi Jacob
    I created one calculated key figure which contains the real key figure from the cube. When I press Ok, it will get saved. The only thing I could see is the properties of the calculated key figure/ key figure. Where I can see count all values <>0 in calculate result as.
    I could not find below at the query level. Are you talking about the aggregation tab in the infoobject maintainance in BW side?
    "on the next screen in bottom left corner, there is a button (I think it will say "Expand" if you log on in english). Click that one and now you get to set the aggregation behaviour. Set the exception aggregation to 'count all values 0' and the reference char to the costcenter (I think your mst. costcenter in this case)"
    Cheers
    Chanda

  • Key Figure Summation in DSO

    Hi,
    I am loading data from Cube to DSO.
    In cube i have fields with 2 records below as example
    f1=1 f2=2 f3=3 f4=4 and key figure k1=1
    f1=1 f2=2 f3=3 f4=4 and key figure k1=1
    In DSO all these f1's fields are key fields as per requirement. And when i load now i get in DSO as
    f1=1 f2=2 f3=3 f4=4 and key figure k1=2
    I do not want k1=2 but i want k1=1 in DSO and not sure why this is getting summed up even though i have selected overwrite in Transfer rules.
    I have checked mapping and cube data. All are fine.
    I just want to avoid this and do not know what to do.
    A routine or formula or something else?
    Please help.

    Hi,
    Check your DSO Design
    Keep f1 ,f2, f3, f4, are in KeyFileds of DSO  and Keep key figure k1 in DataFields of DSO.
    Here I'm assuming that F1 to F4 are Charecteristics.And only K1 is Keyfigure. If this is the case then I hope it will work if you follw the above design.
    Thanks
    Reddy

  • DSO - Key figure  summation

    Hi Experts.
    I have a question on how BW is thinking when updating DSOs.
    If I mark the keyfigures in the DSO to summarize, what will then be the effect.
    If I compare to a SQL sentence I will sum the keyfigures for sure.
    But will i Group by all the others info-object, or only the info-objects that are in the key area of the DSO. 
    Thank you in advance !

    Husby,
    In your update rule you will specify Addition or Overwrite. This will play the major role in how the data is summed up or not. Again this summarization will happen only for the key figures.
    So if the keys match it will do the sum or not based on the condition set.
    Hope this helps.
    Alex(Arthur Samson)

  • Impact of Delta Records on Key Figure Summation in DSO

    Hi experts,
    I have a key figure with aggregation type "summation" in a DSO. I would like to know the impact of delta records on the key figure.
    E.g.
    source DSO
    doc_id (key) | doc_pos | type | amount
    4711 | 1 | A | 100 USD
    4711 | 2 | B | 20 USD
    target DSO
    doc_id (key) | amount
    4711 | 120 USD
    If the first record is modified ("type" from A to C) as follows and delta-loaded to target DSO:
    4711 | 1 | C | 100 USD
    This will lead to incorrect amount:
    target DSO
    doc_id (key) | amount
    4711 | 220 USD
    How can I handle this situation?
    Thanks in advance.
    Regards,
    Meng

    Hi..
    I believe one document number and document Item will have only one type.
    Like 4711      1    should have only one type ( A / B / C).
    If the above assumption is true then just remove Doc Type from Key field of source DSO.
    Then From Source to Target Change Log table can handle this.
    Regards
    Anindya

  • How to display all available data for KFs from different Cubes

    Hi,
    I am using a MultiProvider that consists of two InfoCubes. KF1 uses Cube1, KF2 uses Cube2 - characteristic Country exists in both cubes. I have the following data:
    KF1 - Country 1: 5
    KF1 - Country 3: 8
    KF1 - Country 4: 10
    KF2 - Coutnry 1: 9
    KF2 - Country 2: 7
    KF2 - Country 5: 3
    I have a query that uses Country as a drilldown characteristic (ROWS) and displays the values of KF1 and KF2 (COLUMNS) for each Country. However, instead of seeing data for Countries 1-5 I only see data where I have results for KF1 (Countries 1,3 and 4). The value for Country 1 for KF2 shows up correctly in the corresponding row, but Countries 2+5 aren't displayed for KF2. If I change the Access Type for Result Values from "Posted Values" to "Master Data" I get the correct result. However this is not feasible in the final setting due to the amount of data that has to be handled (MasterData setting will lead to crashes of the query due to maximum number of cells exceeded).
    Are there any other options to force the query to display values for all characteristic values where I have data for any KF?
    Thanks a lot for your help!
    Best regards,
    David

    As it turned out the issue was due to 2 restrictions on KPI2:
    1) Restriction to InfoProvider "Cube 2"
    2) Constant selection on two characteristics that have filters on a global level but which should not affect the display of the data for KF2
    Removing (1)+(2) provided the desired result.

  • How to copy two different key figures in third key figure in different time bucket.

    Hello,
    I require to copy one key figure-A for 2 months (M+1 and M+2) in other Key figure C. At the same time, I need to copy key figure-B from 3rd month onwards (M+3 onwards) to same key figure C. Is there any way to do this, please suggest.
    Regards
    Rajeev

    Check the following thread
    Defaulting to a KF from 2 KFs, based on different periods
    Thanks,
    Pramod

  • One Key FIgure in more than one column with different restrictions

    Hi,
      I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??

    Hi Pravender Chauhan,
        If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
    If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
    Assign points if Useful.
    Regards,
    Rajdeep.

  • How to populate values in DP key figure which is not present in Info Cube

    Hi
    We have a special Key figure in Demand Planning created for uplaoding Forecasts coming directly from customer,
    This key figure is not present in Info Cube and data doesnot pupulate in this key figure through Info cube build,
    Hence data in this key figure is to be loaded externally , Customer sends his forecasts through EDI messages, Now we want to update forecast from external customer in to this  special key figure,
    Please suggest some ways
    Thanks and regards,
    Nitin Lavhe

    Hi
    I think you can get loaded this information in the cube in any other key figure which is available in the info cube. Then while loading the data into planning area using TSCUBE, you can define the key figure assignment.
    In which you define data from which key figure of infocube has to be get loaded into which key figure of planning area. Here you can define the respective key figures.
    Please let us know if it helps you. Please let us know if you require any more information from our side.
    Thanks
    Amol

  • Using Non cumulative key figure in Real time cube

    Hi gurus,
    I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
    Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
    Thanks in advance
    Regards,
    Ravikanth

    Hi Ravi,
          Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
    Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
    For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
    Thanks & Regards,
    Balajee.

  • Restricted key figure for more than one key figure

    hi all
    i want to restrict almost three keyfigures based on the  same posting period. So instead of creating restricted key figures for each key figures can i create a RKF for all the three key figures based on the same posting period.
    Is there any way i can do that.
    thanks and regards
    vijaykumar

    hello Chandra,
    if those are the only 3 keyfigures in the query, you can have posting period restricted to the required period in the filter area( if u dont want to the period to be displayed) or else you can restrict the period in the rows/free chars area too.
    you can restrict the posting period using variable with period value as a user input value.
    If there are other key figures too, then you need to create 3 diffrent restricted key figures restricted for this period.
    thanks,

  • No split for particular key figure while "Time Distribution in Update Rule"

    Hi experts,
    I wanted to have data in the infocube at day level. Currently it has only week level data. So I used "Time Distribution in Update Rule". Due to this am able to split 0Calweek data at 0calday.
    But while using   "Time Distribution in Update Rule" all key figures are getting split by same way. For e.g. key fig1 has week level data as 100. so after getting split in calday, it is apperaring as (100/7) 14.285 . for every day.
    But i dont want to happen this split for every key figure. For some key figures value "100" should be as it for every field in calday. for e.g. 100 should not get divided by 7 and posted as 100 only for all seven days.
    How can i achieve this? Is it possible if i write formula or routine for particular key figure so that split should not take place for that particular kay figure? Or is there any other to keep exception?
    Please help.
    Thanks

    Hi,
    This is one of the limitation of Time Distribution that you can not have it by individual key figure. Check the below article for more information,
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e1096a-e058-2c10-06b7-c66f9a82a9c8?QuickLink=index&overridelayout=true]
    I think in this case you will have to write individual routine for each key figure instead of Time Distribution approach.
    Regards,
    Durgesh.

Maybe you are looking for