Keypad Enter Game Console and my keyboard don't mix

I recenty aquired a list of cheats for "Ghost Recon Advanced Warfighter". At the top of the cheat sheat it reads:
"Press [Keypad Enter] to display the console window. Then, enter one of the following codes to activate the cheat function..."
My keyboard (shown below) lacks a keypad. I think the "[fm]" key (detailed in lower corner) has some thing to do with the solution to the problem, but I'm not 100% sure. If it is please explain how to use it.
Additional info: Laptop: HP Pavilion tx2500 notebook PC-- uses Windows Vista Home Premium.

Do you see button written num lock on keyboard?
fn key + num lock key will enable your numpad.
You can use right side of keyboard as numpad. jkl, uio and others.

Similar Messages

My iPhone 4gs won't let me download any apps because the security code is invalid? I enter everything correct and my address, don't understand why this is happening! Help please

I just need to be able to download apps and my phone keeps saying the security code is invalid which doesnt make sense because I enter everything correct and it's really fustrating I've been to the apple store I've called support and they can't seem to fix it! Can somebody please help me? I thought apple was suposta be easy to use :\

This can sometimes happen because there is a missmatch between the billing address entered on your iTunes account and the billing address from your bank records. See http://support.apple.com/kb/TS1646.

How do i hook up my Inspire T5400 to my game console and satellite?

I would like to hook up my playstation and my satellite to my speakers but it doesnt have to be at the same time,

Super Bump

Charm bar and touch screen don't mix

I have a surface tablet. I have windows RT 8.1. when I open a app and use the charm bar it either opens then closes right away before I even see the options, or it opens as long as I don't move my finger and try to open a option.
How do I fix this?

Hi lefty4ever,
When did this issue occur ?
Have you tried to use Win+C to open the charm bar to have a check ?
If it is possible ,please plug in a USB mouse to verify whether it is caused by the touch screen .
We can reset the display options to have a check. Open the Tablet PC Settings applet in Control Panel. Under "Display options", select the "Reset" button to have a check .
If the issue occurred ,it is recommended to perform a system restore to recover the machine to a previous normal point .
Best regards

Battery and Plugged in Don't Mix = Shut Down (t400)

I have a Thinkpad T400 and it is a little over one yr old. Nothing really fancy going on with it, so I am probably like an everyday user. However, I do have a Sprint Modem Plugged into my thinkpad (plugs into a USB slot to provide me anywhere access to internet).
When I have the Sprint USB Card plugged in and have it connected to the internet the probelms arise... if I have the battery installed and the thinkpad plugged in simulatenously, the machine shuts down soon after I get connected to the internet. The screen goes dark and I do notice the harddrive light blinking. However, no matter how long I wait, the screen never resurrects.
However, if I take the battery out and go off of plugged in power and connect to internet using sprint card, the machine works well. And, if I unplug the machine and run off of battery power the machin works well as well.   I do shut of my wireless card in the thinkpad when using the sprint card.
At one point, I thought this was just the sprint card/ vista issue, but I have noticed that my machine, not as often, will do the same thing when not connected to the internet or connected to the internet via thinkpad wireless modem. In some situtaions, when the screen goes blank, I notice the power cord light on the monitor is out even know the thinkpad is plugged on.
Any thoughts? Sounds like a hardware issue? Could it be overheating?
Just ran a CPUID hardware monitor program and got these results... (in CELSIUS)
*ACPI
THM0:   71    min 70 max 72
THM1: 66     min 63 max 66
*Intel Mobile Core 2 Duo
Core#0: 60     min 58 max 62
Core#1: 58     min 58 max 62
*Hitachi
Assembly: 35      min 35 max 35

Where can I do that... is that something I can do via the lenovo site?
I just remembered that I just have my harddrive replaced (was defective and under warranty)... and I don't recall this happening before.
and just this afternoon, the computer died w/o the sprint usb internet device in place, yet I was at a panera bread accessing their wifi. ...so it appears that the sprint usb and the thinkpad wireless modem thing are the impetuts here.
also i checked my "update history" via control panel and it appears that on Oct 23, 2009, the following update failed, and windows says "Important"
Windows Vista Service Pack 2 (KB948465)
Installation date: ‎10/‎23/‎2009 7:22 PM
Installation status: Failed
Error details: Code 80070070
Update type: Important
Windows Vista Service Pack 2 is an update to Windows Vista that includes all of the updates that have been delivered since Service Pack 1, as well as support for new types of hardware and emerging hardware standards. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows Vista License Terms.
More information:
http://support.microsoft.com/kb/948465
Help and Support:
http://technet.microsoft.com/en-us/windows/dd767387.aspx
And, on Oct 16, 2009... computer failed at getting the following update and windows says "importan"...
Update for Windows Vista (KB955430)
Installation date: ‎10/‎16/‎2009 8:42 PM
Installation status: Failed
Error details: Code 80246005
Update type: Important
Install this update to enable future updates to install successfully on all editions of Windows Vista. This update may be required before selected future updates can be installed. After you install this item, it cannot be removed. This update is provided to you and licensed under the Windows Vista License Terms.
More information:
http://support.microsoft.com/kb/955430
Help and Support:
http://support.microsoft.com
you think this has any significance. i'm gonna try to run these updates tonight and see whats up in the a,m.,
are you thinking a hardware problem?

Cold Fusion in a generic thread pool and enabling JAVA don't mix

I've got Cold Fusion MX installed on a server running Sun One 6.1. I ran into a problem trying to enable JAVA (for servlet support) which I had previous disabled because I didn't use it.
Well, when I went to enable JAVA on the server last week, the service wouldn't restart and the error logs gave me no indication of the problem.
Through a tedious trial-and-error process I've found that having Cold Fusion running under a generic thread pool while trying to have JAVA (the j2ee plugin) running under Sun One simply doesn't work (for whatever reason).
Once I killed the pool, everything runs fine.
Does anyone happen to know why this is? I keep CFMX under its own thread pool because there are certain elements to CFMX that aren't wholly stable and can result in CFMX crashing. If it crashes, the process keeps accepting requests, but never processes them. I'd like to keep the native thread pool free to keep accepting non-CFMX requests even when CFMX crashes.
Thus the separate thread pool for CFMX.
But now I can't run CFMX in a separate thread pool with JAVA enabled.
Anyone have any insights into why this is?
Thanks

Two things. Firstly, it's better to use private static final Object classLock = new Object();because that saves you worrying about whether any other code synchronises on it. Secondly, if you do decide to go for the delegation route then java.lang.reflect.Proxy may be a good way forward.

Flash transition and widescreen filter don't mix

I just got a refurbed Mac pro and the unversal versionn of FCP 5.1. When I loaded my project that had 5 seconds of a still frame and a flash transition to a 30% slow motion clip with a wide screen effect and the wide screen will not show. FCP acts weird. I knew I needed to update FCP to its 5.1.4 version. Well my macpro did not come with a airport express card to connect to the internet, so I thought I could down load the update on my power book and move it over and load it on my Mac Pro. It said I have already downloaded it. I can't find it anywhere. I called support and they said to ask the administrator to reset it so I can down load it. Any suggestions?

1.Download the Flash setup file from here:
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version].
Save it to your Desktop.
2. Close Firefox using File > Exit
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed,
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen).
See this:
[http://vistasupport.mvps.org/run_as_administrator.htm]

Macbook pro trackpad and keyboard don't function

I was working on my photography coursework monday night, and my keyboard froze, but the mouse worked. then I restarted it (losing all my unsaved editing, by the way) and neither the trackpad or internal keyboard worked. after that, for a few days, they both worked on and off, before completely ceasing to function.
I'm running 10.5.6, and I had to buy an external mouse and keyboard this evening.
my warranty has run out, I don't have apple care, and I cant go for more than 24 hours without my computer because we don't have another one in the house.
does anyone know what the problem may be, and how to fix it without being without a computer for the next god only knows how long? (the place I got my mbp from doesn't allow loaned computers etc.)
(I do not have the money to buy a new laptop either)
Message was edited by: Petite Lapine

Funny thing is I had the exact same problem last week. I run a Macbook Pro 2.2 intel. The laptop is alway in a studio, on a stand and connected to an external keyboard and Wacom tablet. I'll use the laptop keypad and trackpad maybe 1% of the time out of the day. The day I updated to 10.5.6 is when the keypad and trackpad stopped working.
I had updated to 10.5 about 2-3 weeks previous, after running 10.4 for over a year with no problems. The original Archive and Instal had so many issues that I was forced to do the new instal and wipe the hard drive. After a few calls to Apple regarding the 10.5 install issues, I was offered an additional 90 days warranty.
When I took it into Apple last weekend for the keypad and trackpad issues I was told that the warranty that was offered as a goodwill gesture didn't cover any hardware issues, only software. Apple ran through a few things on the laptop and also tried booting off a bootable startup disk and couldn't figure out the problem.
I did check the cable issue as described below and also went thought other resets that I have read about in other posts. All to no avail.
Apple has quoted a new top case assembly and a new keyboard. With labor I'm looking at a total of £205 to fix the issue.
Seems a bit funny for it to all happen so soon after my 10.5 purchase and also on the day of the 10.5.6 update. I'm aware of how may others may have done the same update with no issues but this laptop has been treated with kid gloves over the past year and a half. If I was rough with it, then I could except it but when it's been treated as it has been then I just can't understand it.
Any others with the same problems, it would be good to hear from you.

How to type Keypad Enter on short A1314 keyboard?

My imac came with the short A1314 keyboard, but for QuarkXpress there is a special command that uses the Keypad Enter key. Any way to do that with this keyboard that has no keypad section? TIA.

Try using the Return key. On my short (no keypad) keyboard, that key is labelled both Return and Enter.
You may need to experiment with adding a modifier key, such as Shift, Option, Control, etc.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess.

When opening my home page or safari icons, they open but they are shaded and don't work, it's like they are frozen. I can tap on google and the keyboard come up but it won't search. Any ideas how to fix this?

Hello,
I am a new Ipad2 user and have a problem that I'm not sure what to do. When I try to open my homepage I created or the Safari icon, it opens fine, but they don't work. The page is shaded, does not scroll and is locked up. I can tap google and a keyboard come up and I can search but the results are shaded and are frozen(does not scroll). Does anybody know whats going on? I appreciate your help.
Thanks

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

Try resetting your SMC and PRAM.
Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

I don't recall always having to enter admin. name and p/w when doing updates. Is this req't only for certain software. I am a bit paranoid now with the Mac Defender lurking about.

When completing the software updates I can't remember always having to enter administrator name and password. Maybe it's just been automatic on my part but now I rethink the process when I am asked to enter this info since the Mac Defender malware became an issue with Mac. Just wanted to know if this procedure occurs with all software updates or is it selective based on the type of update? This time is concerned Airport. Thanks for any insight.

Are you running as an Admin User or non-Admin? ie. have you set your Mac up with multiple user accounts - one as an Admin and one as a Standard user?
For security, you are better off having an Admin user account that has Admin privileges and a Standard user account that you use from day to day with standard privileges. When you install system updates you will be required to enter an Admin name and password, and any software that needs access to the system will require an Admin name and password, but anything that you install just for your user account that doesn't require total system access will be able to be dragged and dropped into your Application folder as per usual.
MacDefender runs in a web browser - that should be a huge red flag! If you see a warning when you are running Safari or another web browser close the browser window or Force Quit it. (under the Apple Menu => Force Quit...) In Safari Preferences untick Open "safe" files after downloading. (It will prevent an installer from automatically launching if something nasty is downloaded to your machine.) MacDefender and its variants attempt to trick people into installing stuff that will compromise their system. If something pops up unannounced on your machine that you didn't download, close it and delete it.
This article goes into depth about the MacDefender Malware:
http://rixstep.com/2/20110610,00.shtml
The salient points are summed up in the "Recapitulate" section at the bottom of the article: It's a bit Hipster Geeky.
"To Recapitulate
As recounted elsewhere, the Mac Defender attack is a well thought out attack that may have taken months to get together. The first step was to compromise websites of eejits, hack their FTP accounts, and upload dynamited files to their servers.
Then followed the Google whacks which led to people clicking on links they'd provided at the sites they'd hijacked.
And then finally they uploaded Mac Defender so people would get hit by it. And the purpose of Mac Defender is to scare you into thinking you're infected so you pull out your credit card.
Then the hackers run away with your credit card info and buy mink coats and chinchilla coats or whatever they want.
But staying clear of Mac Defender is really easy and doesn't require any AV software.
Don't ever open anything you didn't want to download.
Turn off JavaScript when accessing any Google Images site.
Make sure you don't have Safari set to automatically open downloads."
I'd add, keep your software up to date. Especially Adobe's Flash Plug-in as this is no longer supplied in system updates by Apple and could become an attack vector in the future. Always download software from reputable sources - ie. when downloading the Flash plug-in, get it from Adobe directly - don't follow a link from a website that tells you your version of Flash is out of date.
Enable your Firewall in System Preferences => Security => Firewall. Click on the Advanced button and Enable Stealth Mode too.
Also under:
System Preferences => Security => General.
Disable Automatic Login. Require a password to unlock each System Preferences pane. Use secure virtual memory. Automatically update safe downloads list.
Educate yourself.

Keypad Enter Game Console and my keyboard don't mix

Similar Messages

Maybe you are looking for