Kicked off line

MMy iPad goes off line all the time and crashes .. Safari does not keep me on line.. Can you help me..

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If that doesn't work, try Settings > General > Reset > reset Network Settings. Note that if you use this method, you will need to reconnect to all of your WiFi networks and Bluetooth devices.

Similar Messages

  • Why do I keep getting kicked off line when I'm in the middle of something

    Why is it I keep getting kicked off in the middle of doing something

    Try #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I keep having a problem with items in my house getting kicked off line

    I have 2 kindle fires and one regular kindle, a pc and a laptop. I have comcast cable and they say I have enough strength to run 10 items. What is causing this/

    First of all let me know the model number of the router? Does it happen when the modem connected directly to the computer? Well, you can try the following set of settings:
               1] Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
               2] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page). Here is the link for determining and setting up the correct MTU size: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...
              3] Then Click on wireless Tab select Channel Width to 20 MHz only and Channel to 1, 3, 6, 9, and 11. Click Save Settings.
    Second, look for the current firmware version in the router.

  • AE cycles sporradically and kicks off line

    My setup is as follows:
    Cox Cable ISP -> Motorola Cable Modem model SB5101U -> AE model A1264 -> PowerBook, MacBook, PS3, iPhones etc.
    AE firmware v.7.4.2
    I have been using this set up for a few months perfectly but the past few weeks have driven me crazy (thank God for neighbors with open networks). AE light is green and everything works great, and then BAM! It does some sort of cycle and goes to amber and I lose connectivity. Whether I unplug it or not it goes through it's cycle and is back up in 5 minutes or so. Super annoying when I'm playing Call of Duty with my boss ; ) The problem is sporadic and sometimes I get a few hours of connectivity and sometimes it cycles every 10+ minutes; but I am experiencing this on a daily basis.
    I have checked with Cox and my levels are stronger than any of my neighbors and I have no packet loss. They've run the test they can and everything is great to the modem - it's something between the modem and me. I plugged the modem directly into the PS3 and it stayed online all night. Leaving me with the AE being the problem?
    Please help - I love apple but this is driving me nuts. I searched for an hour on these boards but am not sure what the best answer is. Do I need to go back to an old firmware?
    I do not have any interference as well (no cordless phones etc.)
    THANKS GENIUSES!

    Can no one help me on this one? Any thoughts what-so-ever?

  • Closing the display kicks me off line

    i have a brand new macbook and everytime i close the display or if my screen saver kicks in i get kicked off of aim. is there a way to prevent this from happening?

    i have a brand new macbook and everytime i close the
    display [...] i get kicked
    off of aim.
    Closing the screen/lid forces the MacBook into sleep mode (ie. connections are also lost).
    1. I suggest closing the lid as far as possible without having the MacBook go to sleep.
    2. Or attach a mouse, close the lid and press a mouse key to wake it up with the lid closed.
    3. Close lid, wait until sleep, open lid somewhat, try and press a key on the keyboard, close lid again.
    White MacBook, 2,0-Ghz C2D, 1GB RAM, 80GB HD   Mac OS X (10.4.9)   Apple iPod 5G 60GB

  • Getting kicked off of ichat

    Okay, I am getting kicked off of ichat without even knowning that I am offline. I am hooked up through a linksys wireless router wrt54g model. Also, I ALWAYS get an error message when trying to connect to videochat. any help on this would be great!
    Thank you in advance.

    Hi Trenchtown,
    Welcome to the Apple Discussions
    If you mean that when you have logged in to the AIM servers that you get silent drops in connection...
    (iChat looks like it is connected but Buddies report you look off line and during chats the Texts. stop coming and they don't get yours)
    Then go to the Airport icon in the Menu Bar if you have it there and Select Signal Robustness.
    8:22 PM Wednesday; April 11, 2007

  • Counting the Number of days since Project Kick off for each task

    I'm a bit of a newbie to Project, so forgive me if this is simple.  I have a project plan that 318+/- entries long complete with estimated duration, start and end dates. I'm now being asked to provide these entries (in addition to the dates)
    in cumulative duration.  That is to say that is to say that they want to know how many after the projects kick off will this line item complete. 
    Does  a simple way exist?

    wbicknell --
    Create a custom task Duration field and name it something like Days from Start.  In this custom Duration field, enter the following formula:
    ProjDateDiff([Project Start], [Start], "Standard")
    This formula will calculate the difference between the current Start date of each task and the Start date of the entire project using the Standard calendar.  If your project is using any calendar other than the Standard calendar as the Project calendar
    (Project > Project Information), then enter the name of that calendar in the formula instead of the Standard calendar. In the Calculation for Task and Group Summary section of the dialog, be sure to select the "Use formula" option to force it
    to calculate Duration values for summary tasks.  Hope this helps.
    Dale A. Howard [MVP]
    VP of Educational Services
    msProjectExperts
    http://www.msprojectexperts.com
    http://www.projectserverexperts.com
    "We write the books on Project Server"

  • IMac Internet Connection Issues (Why do I keep getting kicked off?)

    Hi All.
    I have a 24" aluminum iMac that doesn't like to stay connected to the internet via ethernet or Airport. I recently moved and am using a Clear modem that I am directly connected to via ethernet and the modem is functioning fine. My Mac will access the internet perfectly and then then next morning not have a connection at all. Diagnostics fail at Network Settings.
    I have renewed my DHCP lease, restarted both comp and modem...jumped through all the hoops with a Clear rep. Still nothing. Not using any routers or 3rd party devices to connect unless using the Airport.
    We have free internet where we live and my Airport will detect the router, but will not connect to the internet. The airport reads full signal strength, so there should be no issue. I have not changed my firewall or privacy settings, so there should be no issue there either. I did recently upgrade my Firefox application.
    With both the Airport and ethernet I seemed to just be getting "kicked off" the internet. Each time I get kicked off, reconnecting is more of a chore...Please help Thank you in advance for any help you can provide!

    Hi Rick.
    I have Clear internet service, which does not run via cable or telephone line. I assume it is DSL. My Mac acted the same when I was on cable though, only the connection always come back after resetting the linksys router I had at the time. It only seems to drop the connection after waking from sleep mode.
    I am using a standard ethernet cable. At times, in the Network portion of System Preferences, the status of my ethernet reads "unplugged" when the ethernet cord is still connected.
    I double checked the connection speed within the network utility, as you suggested, and everything looks as it should.
    The wireless situation...I do not have control over the router. It is free wireless via a linksys router in our apartment complex (only 5 or 6 units). I have never been able to connect to this but the other computers in the household pick up the signal perfectly.
    Thanks for your help Rick. I appreciate it very much.
    V.

  • SCEP 2012 clients kicking off random scans

    We have an SCCM 2012 environment with SCEP 2012 recently deployed. We have a policy in place that does weekly full scans on Tuesdays at 12AM.  The client machines are 64 bit Windows 7.  We are seeing some random computers kicking off Full scans
    at various points in the day.  We thought that initially there were viruses on these machines and that was causing the scans, but according to the EP console, they do not have any type of virus or malware.
    Any ideas?

    Here is the way MS does such things. (Update works this way too) It is STUPID, of course, but then "SMART" is not a word that fits Microsoft very well. Just look at Windows 8 for an example or to the fact you can't even find a simple link to the
    SCEP client for what ever happens to be the latest greatest version.
    As for the auto scanning, it will occur REGARDLESS of the time set shortly after you start your PC if it was not able to do it at the appointed time. So if it is set for 12am, and if the system, for whatever reason was not on, it will kick off shorty after
    it is booted, REGARDLESS of the current time. (It is supposed to wait until the system is idle, but MS uses lack of keyboard or mouse action to decide if a system is active instead of actually looking to see if its. For example watching a movie. MS would say
    after five minutes, it is inactive, then run the scan, screen save, update, or whatever. Maybe you were just reading a long email, letter, or article online, doesn't matter MS will kick off the scheduled event. Of course this will cause problems for the movie
    etc, but MS won't care. Bottom line is if the MS AV is doing its job, or anyone's Av for that matter, and was installed on a 100% clean PC, then one should NEVER need to do a blind system scan. Common sense really. Of course MS AV is not very good at preventing
    the more destructive of the evils out there such as the Ransomewares and things like the ASK or the Google toolbar or the many fake "fix your PC" popups that are out there etc. etc.
    Best just to keep it disabled.
    Ralph

  • VB Button to kick off a script

    Hi Experts, can anyone please tell me if there is a way to create a VB Button on a template to kick off a script?  We tried sending in data based on formulas in a template but realize it would be much quicker via script.  It would have to be seemless for our end users so a button to do this would be optimal.  Any suggestions? Thanks, Tracey

    Hi,
    I have the VBA working with one exception, it brings up the script I want to run but then I need to click "Finish" to actually launch the script.  My Code is below.  How can I have it automatically run the script without me having to click "Finish" on the dialouge prompt/window?
    PS - Even though the teamid is Company (Public) I still needed to leave that String blank in the DataManagerRunPackage line for it to work... not sure why.
    Thanks all!
    Sub RUNPACKAGE()
    Dim ea As New FPMXLClient.EPMAddInAutomation
    Dim packageId As String, groupId As String, teamId As String
    ea.DataManagerRunPackage "FPP_SPREAD", "Data Management", ""
    End Sub

  • Using AppleScript to kick off an iDisk 'sync-now'

    I'm using my iDisk to synchronize project work between my MacBook Pro and my Mac Pro.
    Unfortunately, I get problems when syncing my iDisk as some files throw up errors due to 'symlinks'. It's not too much trouble as the files at fault are only temporary and can be deleted before syncing.
    To get around the problem, I decided to switch to manual iDisk syncing & write an AppleScript to simply delete a few folders and kick off a sync.
    The record command in the Script Editor doesn't seem to recognize the 'sync' command. Does anyone know if it can potentially be triggered?
    So to cut a long story short; 'How do I trigger an iDisk sync via AppleScript'?
    Thanks in advance!

    No, it doesn't have to be an exe... but you have to actually run java.exe just like on the command line.
    You can kill it if you hold onto the Process object it returns. Read the API docs for java.lang.Runtime and java.lang.Process

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HP Officejet Pro 850 showing off line when it is turned on and plugged in.

    Ungh, it has been weeks now and this printer has just stopped working and is showing OFFLINE.  It was plugged into the back of the computer all year and worked fine and it just stopped printing so we plugged it into the USB port at the front of the computer and it worked for a while and now no matter where we plug it in, we can see it there in the devices and printers but it is greyed out.  You can make it default no problem but it just will not print.  We have downloaded the driver off the site over and over, uinstalled it over and over, when you select a document to print you can send the print to the printer, you can see it listed there but it just does not print.  I just went to the HP site and downloaded some kind of printing wizard assisstant or something and it sent a test page to the printer and it worked but this computer for whatever reason it gives me the message every time we try and print "Printer off line" Anyone have any suggestions?  Very frustrating. Thanks! Mike

    Hi Mike-lake,You may find this document helpful.  It covers a number of situations with the printer showing "offline" and walks through fixing this.  http://support.hp.com/us-en/product/HP-Officejet-2620-All-in-One-Printer-series/5357283/model/5385219/document/c04249080Please let me know if this corrects the issue for you!Jean

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • I seem to have multiple problems related or unrelated.  I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line.  My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

    Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there. 
    My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from. 
    When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
    I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
    So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems.  Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe.  I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
    My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
    S

    Mail troubleshooting - Yosemite
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

Maybe you are looking for