KM: automatically remember author to review his document

Hello experts,
I'm working with Knowledge Management and Collaboration in EP 7.0. There different authors manage lots of documentations for end-users.
Is there a possibility to automatically remember (or even raise up) the author of a document to review it after a validity date ran off? E.g. Mr. Smith is author of the document xyz.doc and every 2 years the document should be reviewed. Therefore the author should be remembered to do this.
Is there any available functionality to count the hits on a document?
I'm quite a newcomer with EP and would need some concrete instructions.
Thanks a lot,
Sandy

Hi Amit,
Thanks for your answer,
I verified what you wrote but unfortunately it is not I need.
I need that who writes the write a review" is only the owner of the message. In other words on the same folder if the "USER1" writes a "write a review" the "USER2" can read but not cancel, otherwise if "USER2" writes a "write a review" the USER1 can read but not cancel.
regards
Enzo

Similar Messages

GL account automatically cleared by the bank statemetn document

Hello all,
I would like to ask you a question.
We have done the payments by payment run to the vendor , FI document 2000008482 has been created, Then we received the bank statement which created the document 101481822 and the GL account used for this payment 2435000022 was automatically cleared by this bank statement documents 101481822
Usually they do manual clearing by f-03 but for the accoutn 2435000022 its automatic
I have 2 questions
1. where in customizing you set up this option that the GL account is automatically cleared when posting bank statement
2. if they need to reverse payment document, how this could be possible? as if they want to reset the clearing docuemtn, they would have to reverse the bank statement document
thanks for your feedback, its reallt apprecited
regards
Hana

You should feel happy if the system clears the payment document. This what the behavious is expected.
When you made the payment it goes to bank sub account, then when you upload the bank statement, then the system expects to clear based on the cheque number etc.
However, if you do not want you can still stop them from clearing and then entry only gets posted. But again, you will be doing the same job what the system is doing by using F-03 or F.13
Please check your posting type against the posting rule
SPRO ==> Bank Accunting ==> Business Transactions ==> Electronic Bank Statement -==> Make Global Settings for Electronic Bank Statement ==> Posting Rules
Thanks,
Ravi

How do I resolve this problem: This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required

When attempting to log in to the web site the following message is received. This web site works
on other systems using Firefox.
This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.
Additionally, a 401 Authorization Required error was encountered while trying to use an ErrorDocument to handle the request.
== URL of affected sites ==
http://www.mdyc.org/members_only

You may have saved a bad password so Firefox is entering that rather than giving you the option to try again. Go to Tools > Options > Security > Saved Passwords and delete the saved passwords for that site and then try logging in again.

When combining PDF's, the author is picked up from the first PDF opened. How can I make it use a new author when combining several documents?

When combining PDF's, the author is picked up from the first PDF opened. How can I make it use a new author when combining several documents?

Make sure that fast web view is enabled.

I cannot get the mac book to automatically remember my e mail and passwords in hotmail, any ideas please

I cannot get the mac book to automatically remember my e mail and passwords in hotmail, any ideas please

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/mail

My Uncle has lost his apple password, he doesn't have access to his email and he cannot remember the answers to his security questions any idea how we can get a password?

My Uncle has lost his apple password, he doesn't have access to his email and he cannot remember the answers to his security questions any idea how we can get a password?

You can start with http://iforgot.apple.com and http://appleid.apple.com and also use the Apple ID Security site from http://support.apple.com/kb/HT5699 for assistance.

Review and document existing SCCM 2012 R2 CU1 Environment

What all tools (MS and Non-MS) are available to Review and document existing SCCM 2012 R2 CU1 Environment? I am aware of following:
SCCM 2012 BPA
Autodoc (is it still available)
What all should be included in such a review and recommendations?

There's also.
http://www.david-obrien.net/2014/01/30/update-inventory-script-makes-configmgr-life-easier/
What should such a tool provide? What do you expect from it do to exactly?
Torsten Meringer | http://www.mssccmfaq.de

How to save automatically the content of the word document on Intranet site

Hi,
There is a function asked by application user:
1. Open Word document from the corporate Intranet site
2. Update the content of the Word document
3. Automatically update the Word document on Intranet site with the new content or automatically upload Word document with the new content.
Thank you for your help or any suggestion.
Best regards,
Mladen

After generating, use F2 to rename the output.
Sorry but I don't think you can avoid it.
Please follow this link and submit a feature request.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

F110 Automatic Payment: Split items per paymt document

Hi,
I have maintained in the config for a payment method that one payment document should not have more than 12 items i.e invoice, this is working fine but my problem is as below:
I have 15 invoices to be paid and the proposal have selected all the 15 invoices for payment with 12 in one payment docu and another 3 in another document .but I am unable to understand how these 3 documents have been considered in another payment document as all the documents have the same info and these 3 docs are in between the sequence eg doc no. 4 & 5 in a sequence of 1 to 15.
For testing purpose I have posted all the 15 documents with the same details except for ref number.
Hope I am clear in query.
Thanks
Suresh

Please try the following (I have not tested):
Go to FBZP, Pmnt methods incompany code.
Select one row (dubble-click).
Open the "Form data" window.
There is a field "Sorting of the Line items".
The documentation of this field (F1) is the following:
Sort Variant for the Line Items
                                                                                You can predefine how line items on payment media and payment advice
    notes are sorted by using sort variants. If the user does not want this
    data to be sorted in a particular way, then it is sorted by the SAP
    document number of the invoice.
                                                                                The sort variants are defined in the display format configuration menu.
    There, choose Periodic processing -> Payment media -> Line items -> Sort
    variants.
(I think that the right path is SPRO ... /Account Payable and Account Receivable/
Business transactions/Outgoing payments/Automatic Outgoing payments/Payment media/Sort variants/
Payment media: define Sort variants for line items)

F110 Automatic Payment Run Is Not Picking Documents.

Hi,
I have a foreign based vendor for whom i have assigned a payment method recently (previously there was no payment method assigned) and also checked the foreign business partners allowed checkbox in the payment method for company codes screen.
However when i create new vendor invoices for the vendor the documents are not selected for payment in the F110 payment run. The error message shown is "No valid payment method". However when i directly assign a payment method to the vendor document manually, the F110 payment run can select this document.
However the way it shd work is that once the payment method is assiged to the vendor master data then any new documents created for the vendor should be selected for payment in the F110 payment screen.
may i know why this is not working like this?
Edited by: Raja Kumar on Jun 24, 2009 9:32 AM

Hi Raja,
For the Vendor to whom you are posting invoices, if the vendor balance is in debit, then system cant understand for which document it needs to do payment. It might happened that some credit memos are issued for that vendor. That is the reason in APP, its not picking the documents automatically. If the vendor balance is in credit, then it will pick automatically the house bank. Do one thing, make the balance of vendor as credit (H), then if post any invoice it will automatically pick in APP.
Hope u understood, Let me know if u still need any clarification.
Regards
Srikanth

Automatic creation of a Material Ledger document

Hi,
I need to automatically create a Material Ledger document with reference to a material and split valuation code, there are BAPI or Function that may I use?
Thanks
Gianmario Belotti

Hi,
First of all you should maintain transaction OMS2 to allow quantity & value update for the material type & valuation area
otherwise it is not relevant for material ledger.
Regarding how you have to activate the split valuation for a material, please keep in mind the following:
if no valuation category has been assigned to a material (MBEW-BWTTY is blank), and you wish to assign multiple valuation
categories (split valuation) to this material, then the material must not have linked documents and the stock must be zero for both
the current and previous periods.
If you make an attempt to assign a valuation category for this material, error message M3194 will be raised.
Please check the attached note 30656 concerning limitations associated with changing the valuation category.
Please also check note 155874, which outlines what must be performed in order to change the valuation category.
regards
Waman

In Pages how do you automatically update a date in a document each time you open the document?

That's all I need to know, and also if it isn't possible, I'd like to know that.
Thanks,

After one enters the Date/Time in Pages '09, the Edit Date & Time item on the contextual menu provides a checkable Automatically update on open. Every version of Pages v5 lacks this capability, and the auto-update setting will be ignored in a Pages '09 document opened in Pages v5.

Would like to automate the process of hyperlinking pdf documents

I've been tasked with finding a solution to the following problem:
A need has arisen where I work where large PDF files (commonly > 2000 pages) need to be hyper-linked. The PDF files are in fact Brief's of Evidence (prosecution files) and are generally in a particular format and order. Generally, the order is as follows: 1. Various index documents, 2. Witness statements and 3. Exhibit documents. Usually there are many more exhibit documents than there are witness statements.
In each witness statement, the witness may refer to an many exhibit documents and it's this reference that needs to be hyper-linked to the particular exhibit document (located many pages away).   As a standard each exhibit is allocated an exhibit number, commencing at 1 but displayed as "0001". The filename of the individual exhibit is accordingly named, "0001.pdf" Using Adobe Professional (version 7) these files are merged and as a consequence bookmarks are automatically created.
What tools from Adobe are available that will assist with programmatically or automatically scanning (checking) each witness statement (a pdf document) and where relevant predetermined (however that's done or achieved) areas (exhibit references) are required to be hyperlinked to their respective document many pages away.
Is this doable?   Are there developer kits available?
Any advice appreciated.
Regards,
Steven Taylor

Acrobat can't do what you want out of the box. It needs a plug-in that can do that. Have a look at this third party plug-in for Acrobat: AutoBookmark Plug-in for Adobe® Acrobat® / Create and Manage PDF Bookmarks, Links and Destinations   It has a trial version so you can test it to see if it meets your needs.

Automatic Payment using to pay particualr document

Dear Friends,
Can any one please letus know about the automatic payment.
I have four different type of doucument types liabilities and want to pay using the automatic payment program.
eg. KR, ZR, YR and XR and want pay only KR liability through using automatic payment.
Is it possible to pay the particuar liability and other should not pay.
Please let us know asap.
Thanks and regards,
Mahendra Dev

Hi,
There is no configuration needed to meet your requirement.
You need to use free selection tab present in F110.
Please choose Document Type BKPF-BLART from F4 and you can either exclude values that you dont want or include values that you want.
That way you can restrict.
Caio
Raghu

F110-Automatic Selection of vendor bank by document currency

We are currently on version 5.0 and have a situation where one company code wants to eliminate the manual input of partner bank type-field BVTYP into the invoice document. The desired objective is to have the system automatically populate the field dependant on the currency in the document. The vendor master has several bank accounts within the same country, but with different bank accounts depending on the currency to be paid. The field has been populated with a representative country designation followed by the currency type. Payment grouping has been tried by creating a new type using the partner bank type. We are not using payment requests at the current time. Optimization has been briefly investigated.
Does anyone know or have exposure on how to get the payment proposal to show the same vendor with the two different bank accounts that are paid from different partner bank types? Since this pertains to just one company code we don't want to create a customized program.
Thank you for any suggestions.

Question for you-Within the banking details on the vendor, which bank is set up first? We have run into a similar problem but it occurs when we have two USD or similar banks and one has details in the bank reference field and the other does not. The partner bank type is not selected in the document and the system will go to the first bank in the queque. The other think I can think about offhand is has some selected the currency as a field within the payment proposal to exclude? This will exclude the currency you have indicated, but this doesn't sound like your issue. I have run accross this at another client in which they had the payment currency specified in the document as one thing and the actual document currency was something else. Sorry I can't be more helpful. Could you give me some details of how your vendor master is set up? Are you using any bank chains?
Regards,
Sara Perry

KM: automatically remember author to review his document

Similar Messages

Maybe you are looking for