Km development runtime error

hi
i am creating a simple km application to create a folder using km api when i run the application it is displaying runtime error in the portal
any help on this here is the trace .
EXCEPTION
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : kmportalappproject.kmportalcomp
at com.sap.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:283)
at com.sap.portal.prt.component.PortalComponentContextFactory.createPortalComponentContext(PortalComponentContextFactory.java:196)
at com.sap.portal.prt.component.PortalComponentContextFactory.getPortalComponentContext(PortalComponentContextFactory.java:82)
at com.sap.portal.prt.component.PortalComponentContextFactory.getPortalComponentContext(PortalComponentContextFactory.java:55)
at com.sap.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:382)
at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:446)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:395)
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:235)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:637)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:380)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:814)
at com.sap.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:536)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher$1.service(RequestDispatcherFactory.java:168)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher.handleEvent(RequestDispatcherFactory.java:158)
at com.sap.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:244)
at com.sap.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:366)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.navigation.workAreaiView.doOnNodeReady(workAreaiView.java:420)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:380)
at com.sapportals.portal.navigation.workAreaiView.handleEvent(workAreaiView.java:511)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher$1.service(RequestDispatcherFactory.java:168)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher.handleEvent(RequestDispatcherFactory.java:158)
at com.sap.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:244)
at com.sap.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:366)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.pb.PageBuilder.createAndAddEmbeddediView(PageBuilder.java:179)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:414)
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:235)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:637)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:380)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:814)
at com.sap.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:536)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher$1.service(RequestDispatcherFactory.java:168)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher.handleEvent(RequestDispatcherFactory.java:158)
at com.sap.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:244)
at com.sap.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:366)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sap.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:543)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:203)
at com.sap.portal.prt.dispatcher.DispatcherServlet.service(DispatcherServlet.java:122)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:144)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)
at com.sap.portal.http.EnrichNavRequestFilter.doFilter(EnrichNavRequestFilter.java:49)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:212)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:77)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:447)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:37)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Caused by: com.sap.portal.prt.broker.PortalComponentNotFoundException: getPortalComponent failed
at com.sap.portal.prt.broker.PortalAppBroker.getPortalComponent(PortalAppBroker.java:365)
at com.sap.portal.prt.component.PortalComponentContext.getPortalComponentApp(PortalComponentContext.java:115)
at com.sap.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:268)
... 84 more

Hi ,
We are also getting rumtime error on all KM pages (KM content, KM Monitor). Exception is log is
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.km.AdminContent/com.sap.km.AdminContentExplorer/com.sap.km.AdminExplorer
What can be the issue?
Regards,
Apurva

Similar Messages

MDG Material BS_MAT_OVP_03 application is fine in development but giving runtime errors when moved to quality

Dear Experts,
We are Facing a problem with BS_MAT_OVP_03, We have done some enhancements and it is working very much fine in development and when we move it to Quality we are getting runtime errors, they are not with the enhancements but with in standard code itself.
"ASSERTION_FAILED" " ""CL_USMD_ACC_FLD_PROP_DATA=====CP" or "CL_USMD_ACC_FLD_PROP_DATA=====CM009" "VALIDATE_RETURNED_FLD_PROP"
we are getting above runtime error, Please let us know the reason for issue, If some one have come across.
Regards
Sukumar

Hi Sukumar,
It's because of few generated structures could be in "Inactive" mode for your data model when you move to quality system.
Refer each generated structure from SE11 and activate them individually..this can be a post processing activity everytime you move data model structures from one ECC to other ECC.
Thanks
Praveen

ERROR after installing Application Development Runtime 11.1.1.5

hi i have install Application Development Runtime 11.1.1.5 for jdev 11g release 2
ofm_appdev_generic_11.1.1.5.0_disk1_1of1OracleFusionMiddleware11gRelease1 now when i try to open my jspx file my weblogic is 10.1.3 am on window xp am not able to do anything in my jedeveloper error is
java.io.IOException: exception loading C:\JDeveloper\mywork\StoreFrontModule\StorefrontUI\public_html\home.jspx
     at oracle.ide.model.TextNode.openImpl(TextNode.java:535)
     at oracle.ide.model.Node.open(Node.java:1038)
     at oracle.ide.model.Node.open(Node.java:985)
     at oracle.ide.model.Node.ensureOpen(Node.java:2289)
     at oracle.ide.model.TextNode.acquireTextBuffer(TextNode.java:737)
     at oracle.bali.xml.addin.XMLSourceNode._getXmlContext(XMLSourceNode.java:1559)
     at oracle.bali.xml.addin.XMLSourceNode.getXmlContext(XMLSourceNode.java:182)
     at oracle.bali.xml.gui.jdev.JDevXmlContext.getXmlContext(JDevXmlContext.java:221)
     at oracle.bali.xml.gui.jdev.AbstractXmlVisualEditor.setContext(AbstractXmlVisualEditor.java:251)
     at oracle.bali.xml.gui.jdev.AsynchronousXmlVisualEditor.updateContextImpl(AsynchronousXmlVisualEditor.java:248)
     at oracle.jdevimpl.webapp.editor.AbstractWebAppEditor.updateContextImpl(AbstractWebAppEditor.java:241)
     at oracle.jdevimpl.webapp.editor.jsp.JspEditor.updateContextImpl(JspEditor.java:64)
     at oracle.bali.xml.gui.jdev.AsynchronousXmlVisualEditor.setDelayedContext(AsynchronousXmlVisualEditor.java:235)
     at oracle.bali.xml.gui.jdev.AsynchronousXmlVisualEditor$3$1.run(AsynchronousXmlVisualEditor.java:329)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
     at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
     at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1046)
     at java.awt.Dialog$3.run(Dialog.java:1098)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1096)
     at java.awt.Component.show(Component.java:1585)
     at java.awt.Component.setVisible(Component.java:1537)
     at java.awt.Window.setVisible(Window.java:842)
     at java.awt.Dialog.setVisible(Dialog.java:986)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
     at oracle.javatools.dialogs.ExceptionDialog.reallyShowExceptionDialog(ExceptionDialog.java:294)
     at oracle.javatools.dialogs.ExceptionDialog.showExceptionDialog(ExceptionDialog.java:229)
     at oracle.javatools.dialogs.ExceptionDialog.showExceptionDialog(ExceptionDialog.java:311)
     at oracle.ide.model.TextNode$1.run(TextNode.java:1781)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
     at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
     at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1046)
     at java.awt.Dialog$3.run(Dialog.java:1098)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1096)
     at java.awt.Component.show(Component.java:1585)
     at java.awt.Component.setVisible(Component.java:1537)
     at java.awt.Window.setVisible(Window.java:842)
     at java.awt.Dialog.setVisible(Dialog.java:986)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
     at oracle.javatools.dialogs.ExceptionDialog.reallyShowExceptionDialog(ExceptionDialog.java:294)
     at oracle.javatools.dialogs.ExceptionDialog.showExceptionDialog(ExceptionDialog.java:229)
     at oracle.javatools.dialogs.ExceptionDialog.showExceptionDialog(ExceptionDialog.java:311)
     at oracle.ide.model.TextNode$1.run(TextNode.java:1781)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
     at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
     at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1046)
     at java.awt.Dialog$3.run(Dialog.java:1098)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1096)
     at java.awt.Component.show(Component.java:1585)
     at java.awt.Component.setVisible(Component.java:1537)
     at java.awt.Window.setVisible(Window.java:842)
     at java.awt.Dialog.setVisible(Dialog.java:986)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
     at oracle.ideimpl.feedback2.client.ui.CustomerFeedbackDialog.runDialog(CustomerFeedbackDialog.java:110)
     at oracle.ideimpl.feedback2.client.FeedbackManagerImpl.showCustomerFeedbackDialog(FeedbackManagerImpl.java:525)
     at oracle.ideimpl.feedback2.client.FeedbackManagerImpl.showFeedbackDialog(FeedbackManagerImpl.java:360)
     at oracle.ideimpl.feedback2.client.FeedbackManagerImpl$2.run(FeedbackManagerImpl.java:238)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
     at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
     at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.lang.NullPointerException
     at oracle.jdevimpl.xml.DescriptorNode.getWhitespaceHandler(DescriptorNode.java:551)
     at oracle.jdevimpl.xml.DescriptorNodeDomIO.load(DescriptorNodeDomIO.java:195)
     at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:65)
     at oracle.jdevimpl.xml.DescriptorNode.getNewDescriptorImpl(DescriptorNode.java:742)
     at oracle.jdevimpl.xml.DescriptorNode.getDescriptor(DescriptorNode.java:197)
     at oracle.jdeveloper.xml.j2ee.war.WebAppNode.getWebApp(WebAppNode.java:210)
     at oracle.jdevimpl.xml.j2ee.war.WebAppNodeUtils.getJspPropertyGroup(WebAppNodeUtils.java:38)
     at oracle.jdevimpl.webapp.jsp.JspUtils.getPropertyGroup(JspUtils.java:246)
     at oracle.jdevimpl.webapp.jsp.JspUtils.getPropertyGroup(JspUtils.java:228)
     at oracle.jdeveloper.model.JspSourceNode.getEncoding(JspSourceNode.java:114)
     at oracle.jdevimpl.webapp.html.HtmlSourceNode._getEncoding(HtmlSourceNode.java:413)
     at oracle.jdevimpl.webapp.html.HtmlSourceNode.createReader(HtmlSourceNode.java:307)
     at oracle.ide.model.TextNode.loadTextBuffer(TextNode.java:290)
     at oracle.ide.model.TextNode.openImpl(TextNode.java:523)
     ... 110 more
Edited by: Tshifhiwa on 2012/02/17 4:53 PM
Edited by: Tshifhiwa on 2012/02/17 4:54 PM

did u delete the correct system folder.. it will create different system folder for different version.
and are you deleting at the right place.?
C:\Documents and Settings\{user_id}\Application Data\JDeveloper
for the first time yes jdev will create the Default Domain for you.. and that domain is for weblogic 10.3.5

Error installing Application Development Runtime

hi am trying to install Application Development Runtime which i download from http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html ,am geting this error when i click setup.exe
.ERROR:Provide the JDK/JRE location while lauching the installer. Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path> parameter(s)
PATH=C:\OracleClient32;C:\app\10017134\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome\jdk\jre\bin\classic;C:\DevSuiteHome\jdk\jre\bin;C:\DevSui
teHome\jdk\jre\bin\client;C:\DevSuiteHome\jlib;C:\DevSuiteHome\bin;C:\DevSuiteHome\jre\1.4.2\bin\client;C:\DevSuiteHome\jre\1.4.2\bin;C:\Dev
SuiteHome;C:\app\10017134\product\11.2.0\dbhome_1;C:\Windows\System32;C:\Windows;C:\DevSuiteHome\BIN;C:\app\10017134\product\11.2.0\dbhome_1
\NETWORK\ADMIN;C:\Oracle\Middleware\jdk160_24
i do have java in my machineEdited by: adf009 on 2013/01/28 10:07 AM

Where all are you using hibernate files?
As a workaround reset/restart all the instances and check if it works.
Also, clear the cache and tmp for weblogic server and give a try.
Hope this helps.

Azure API Management developer portal runtime error

Hi,
I'm trying to use the Microsoft Azure API Management functionality just announced in the TechEd 2014 americas.
I was able to create my namespace for Azure API Management in the Azure Mgmt Portal.
But now, when I click on the Management Console or Developer Portal, I got a runtime error (ASP.Net Runtime Error).
I tried from a PC where I'm not authenticated in Azure and it works until I reach the login page, and then I got this Runtime Error again and again.
My subscription is a MSDN subscription.
Any ideas or workarounds here?

Hi,
The problem still exists but it appears only when I'm authenticated.
For example, I open the Windows Azure Management Portal with my admin account, goes to the API Management and click on the Management Console. I'm redirected to the https://middleway.portal.azure-api.net/admin URL and here I got a Runtime Error ASP.Net...
Strange no?

Runtime error in MIRO while using User/Screen exit

Hello,
I have implemented an exit in ABAP for MIRO which when transported to Quality server through runtime error.
I have used EXIT (SMOD) : LFDCB001 which contains FM -> EXIT_SAPLFDCB_001 and include -> ZXM08U31. In this exit I have written my code to disable Inv. Party field. This field exist in Details Tab in Miro Transaction.
Location of the field: MIRO -> Details (tab) -> Inv. Party (Field)
Code written in include ZXM08U31 is:
LOOP AT SCREEN.
IF screen-name = 'INVFO-LIFRE'.
    screen-input = 0.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
This exit is assigned to a project in CMOD and I tested the same in Development system. It is working perfectly.
Now I transported the TR (Includes program ZXM08U31 and Customer enhancement projects ZMIRO). Now when I run MIRO in quality server it triggers the my logic and then through runtime error.
Runtime error says:
Short text
    Dynpro does not exist
Error analysis
    The system attempted to use dynpro 0400 in program "SAPLXM08".
    This dynpro does not exist.
I agree that screen 400 does not exists in program for MIRO but it does not exists in development system as well. So if the runtime error is valid in QEC server then why not in DEV server. And when it can run successfully in DEV server why cant it run in QEC server.
Hope I have explained all the things in detail.
Please provide me the solution since user can bombard anytime for the MIRO dump everytime in QEC.
Regards,
Harjeet Grover

Hi Harjeet,
Reason of your Dump is that the enhancement "LFDCB001" which you used contains one Function module exit "EXIT_SAPLFDCB_001" and another one screen exit in calling screen "SAPLFDCB" number 0150.
So when you activate your project these above mentioned both components were activated.
So when you execute transaction SAP looks for called screen "SAPLXM08" No-0400 but as you havn't created and program go for DUMP.
Solution - Just Create called screen "SAPLXM08" No-0400 and activate.
Thanks,
Vijay

Runtime Error in Test Client after Transport

Hello SDNers,
I did enhancements to standard SAP component ICCMP_BP_SEARCH in developement system in client XXX of system SSS.
I wanted to test the functionality in client YYY so used SCC1 transaction to transport from client XXX to client YYY.
But when i tried to test the application, it resulted in runtime error.
I had kinda identified the problem while debugging, in the class CL_CHTMLB_CONFIG_UTILITY method CREATE_UI_ELEMENT, it is not taking my Z class references rather it still referring to starndard classes.
My Z classes are created for IMPL class, CTXT class and CN00 class.
If any one has suggestions your help would be appreciated
Thanks in advance.
Best Regards,
Srikanth

Srikanth,
Is the definition of the enhancement set defined properly for your test client. This table does not transport and you have to maintain it manually in each client. The view is BSPWDV_EHSET_ASG for SM30. Client is not the first field in the table, so you have to edit this view in each client.
Take care,
Stephen

Runtime error in OLE_FLUSH_CALL

Hi experts,
I am getting a runtime error in FM 'OLE_FLUSH_CALL' DESTINATION 'SAPGUI'
the short dump is having description method_call_error, I am on GUI version 7.1 with patch 22.
Ther error strangly coming only for production system test & development systems are fine.
Please let me know how to solve this.
Regards,
Rahul

OLE_FLUSH_CALL is a very generic error in communication betwen frontend and backend. So got to analyse the dump in more details. However, try with latest sapgui patch if you can reproduce this on demand.
Regards,
Vincent

Dump : Runtime Errors DBIF_RSQL_INVALID_RSQL

Hi Experts,
I got a dump at the select statement in the production during the excution.The Details of the program are :
DATA : BEGIN OF it_ekko OCCURS 0.
 INCLUDE STRUCTURE ekko.
DATA : END OF it_ekko.
START-OF-SELECTION.
SELECT * FROM ekko
 INTO TABLE it_ekko
 WHERE ebeln IN p_ebeln
 AND aedat IN p_aedat
 AND bsart IN p_bsart
 AND lifnr IN p_lifnr.
In ST22, the description of dump details is as follows.
What happened?
Error in ABAP application program.
The current ABAP program "ZMMRP126_1" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not
caught, which
led to a runtime error. The reason for this exception is:
The SQL statement generated from the SAP Open SQL Statement violates a
restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
o ...
You can usually find details in the system log (SM21) and in the
developer trace of the work process (ST11).
If an error occurs the developer trace often informs you about the
current restrictions.
Source Code Extract
001830
> SELECT * FROM ekko "read through purchase orders
001850 INTO TABLE it_ekko
001860 WHERE ebeln IN p_ebeln "for order number
001870 AND aedat IN p_aedat "created date
001880 AND bsart IN p_bsart "document type
001890 AND lifnr IN p_lifnr.
001900
001910 LOOP AT it_ekko INTO ekko.
001920 PERFORM process_items. "read, check and save line items
001930 ENDLOOP.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 69682
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM SY-TITLE Purchase Order Receipt Status
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1 5000098347
SY-MSGV2 SY-MSGV3
SY-MSGV4
Kindly help me to solve out this issue.
Thanks & Regards,
Krishna Kishore .K

hi,
I think you declared p_ebeln as parameter and used in where condition with IN operator.
Could you change with EQ operator.
Or If p_ebeln is select-oprions means check you are giving high range in the selection screen for the input values.
try to check by giving 1 purchase order i.e p_ebeln = 'XXXX' only.
dont give range.
If output is big range means program goes to dump.
are you trying to modify EKKO table in the program?
Please reward if its useful.
Thanks
Sivaparvathi
Or

Runtime error - FBL1N - vendor balance with customer line item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi martin
still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
please suggest me.....what to do ?
Than'x
Dhananjay R

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

Runtime error - DBIF_RSQL_INVALID_RSQL, Exception - CX_SY_OPEN_SQL_DB

Hi,
Following code is working fine in Development system and in Production system I am getting a runtime error. Only difference I am finding is in r_lifnr value. In development system I have few lifnr and in Production system it's not so... am I getting error because of it? Is there any restriction to no. of items populated in a range? Or Basis person need to change any parameter? Enclosed the detail dump below the code...
Advance thanks.
Regards,
Balaji Viswanath.
Code:
SELECT bukrs
 lifnr
 augdt
 augbl
 zuonr
 gjahr
 belnr
 buzei
 waers
 dmbtr
 wrbtr
 zlsch
 shkzg
 blart
 gsber
 sgtxt
INTO TABLE t_bsak_tmp
FROM bsak CLIENT SPECIFIED
WHERE mandt = sy-mandt AND
 lifnr IN r_lifnr AND
 bukrs IN s_bukrs AND
 augdt IN s_augdt AND
 blart IN s_blart.
IF sy-subrc <> 0.
No data found for selection criteria
 MESSAGE i018.
 LEAVE LIST-PROCESSING.
ENDIF.
Dump:
Runtime Errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
 Occurred on 14.11.2005 at 14:35:22
Error in the module RSQL accessing the database interface.
What happened?
Error in ABAP application program.
The current ABAP program "/DS1/FI_CR_REPT_PGSR802_VEND_P" had to be terminated
because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"GET_CLRD_VEN_DATA" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL Statement violates a
restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
o ...
You can usually find details in the system log (SM21) and in the
developer trace of the work process (ST11).
If an error occurs the developer trace often informs you about the
current restrictions.
How to correct the error
The exception must either be prevented, caught within the procedure
"GET_CLRD_VEN_DATA"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
The SAP Open SQL statement must be divided into several smaller units.
If the problem occurred due to the use of an excessively large table
in an IN itab construct, you can use the addition FOR ALL ENTRIES
instead.
When you use this addition, the statement is split into smaller units
according to the restrictions of the database system used.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC
"/DS1/FI_CR_REPT_PGSR802_VEND_P" or "/DS1/FI_CR_REPT_PGSR802_VEND_P"
"GET_CLRD_VEN_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ztm1003"
Network address.......... "145.26.160.103"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C004DC4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 6
Short dump setting....... "full"
Database server.......... "ztm1003"
Database type............ "ORACLE"
Database name............ "A94"
Database owner........... "SAPR3K"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 7 2005 20:44:35"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "85"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE
10.1.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
User, transaction...
Client.............. 110
User................ "INBVI0"
Language key........ "E"
Transaction......... "SE38 "
Program............. "/DS1/FI_CR_REPT_PGSR802_VEND_P"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/DS1/FI_CR_REPT_PGSR802_VEND_P"
in "GET_CLRD_VEN_DATA".
The main program was "/DS1/FI_CR_REPT_PGSR802_VEND_P ".
The termination occurred in line 503 of the source code of the (Include)
program "/DS1/FI_CR_REPT_PGSR802_VEND_P"
of the source code of program "/DS1/FI_CR_REPT_PGSR802_VEND_P" (when calling
the editor 5030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "GET_CLRD_VEN_DATA" "(FORM)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "/DS1/FI_CR_REPT_PGSR802_VEND_P ". Its source
code starts in line 501
of the (Include) program "/DS1/FI_CR_REPT_PGSR802_VEND_P ".
Source code extract
004730 &----
004740 * get country names from t005t
004750 ----
004760 FORM get_country_names.
004770
004780 t_lfa1_land[] = t_lfa1[].
004790 SORT t_lfa1_land BY land1.
004800 DELETE ADJACENT DUPLICATES FROM t_lfa1_land COMPARING land1.
004810
004820 IF NOT t_lfa1_land[] IS INITIAL.
004830 SELECT land1
004840 landx
004850 INTO TABLE t_t005t
004860 FROM t005t
004870 FOR ALL ENTRIES IN t_lfa1_land
004880 WHERE spras = sy-langu AND
004890 land1 = t_lfa1_land-land1.
004900 REFRESH t_lfa1_land.
004910 SORT t_t005t BY land1.
004920 ELSE.
004930 MESSAGE i014 WITH 'No vendor data fetched'(001).
004940 ENDIF.
004950 ENDFORM. " get_country_names
004960 &----
004970 *& Form get_clrd_ven_data
004980 &----
004990 * Cleared vendor data
005000 ----
005010 FORM get_clrd_ven_data .
005020
> SELECT bukrs
005040 lifnr
005050 augdt
005060 augbl
005070 zuonr
005080 gjahr
005090 belnr
005100 buzei
005110 waers
005120 dmbtr
005130 wrbtr
005140 zlsch
005150 shkzg
005160 blart
005170 gsber
005180 sgtxt
005190 INTO TABLE t_bsak_tmp
005200 FROM bsak CLIENT SPECIFIED
005210 * the order of the fields are as in the secondary Index.
005220 WHERE mandt = sy-mandt AND
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 59
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM
SY-TITLE Vendor Payment Details for IRD
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1 /DS1/FI_CR_REPT_PGSR802_VEND_P
SY-MSGV2 RE SY-MSGV3 EN
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
 Program
 Include Line
 Class
 2 FORM GET_CLRD_VEN_DATA
 /DS1/FI_CR_REPT_PGSR802_VEND_P
 /DS1/FI_CR_REPT_PGSR802_VEND_P 503
 1 EVENT START-OF-SELECTION
 /DS1/FI_CR_REPT_PGSR802_VEND_P
 /DS1/FI_CR_REPT_PGSR802_VEND_P 135

Hi Balaji,
Here is what the dump said and my answers are right below them.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
This may not be the reason in your case. This usually happens when you use the option FOR ALL ENTRIES
o The statement contains too many input variables.
Most likely this is your issue. I think your r_lifnr is filled with all the vendors in your system and filled as single values. In that case you may be exceeding a limit set on the system. Instead of trying to remove this setting, what I would suggest is to do the following.
Define a select-option for LIFNR on your selection screen. This way users can have the flexibility of specifying certain vendors. If they don't enter anything, it is still ok. Don't fill it with single values.
Use this select-option in your select statement. After the select statement, do a delete from itab where the vendors are not in your r_lifnr as below.
DELETE t_bsak_tmp WHERE NOT lifnr IN r_lifnr.
Also, avoid using client. You don't need that unless you really want to select from a different client other than your logon client. Your select statement is using logon client anyway, so you don't need to specify that.
o The space needed for the input data exceeds the available memory.
If the above changes are made and the problem is still there, then this is the next thing to look at.
Srinivas

CRYSTAL REPORT RUNTIME ERROR

HI All,
We have completed major upgrade VC++ to MSVS2010 MFC Application and Seagate CR 6.0 to CRVS2010,
I have used CR Viewer 13.0 and i have written code in C#.
when i assign & load Report using CR Viewer , i am getting runtime error, below mentioned error message,
i have installed CRVS2010 & CR .NET Frame work 4.0 ,installed in development machine. same codeing i have written in sample application ,that is working fine but my main application i have inculded my dll file then i getting in this error.
I given references below mentioned three dll files.
CrystalDecisions.CrystalReports.Engine.dll
CrystalDecisions.Shared.dll
CrystalDecisions.Windows.Forms.dll
Please any one look at that message and give me solution for in this issue.
" AN Unhandled exception of type 'SYSTEM.IO.FileloadException' occurred in gpsmg32.dll
Additional information : Could not load file or assembly 'Crystaldecisions.CrystalReports.Engine, Version 13.0.200.0,Culture=neitral, Publickey Token=692fbea5521e1304' or one of its dependencies. Provider DLL failed to initialize correctly.(Exception from HRESULT : 0x8009001D)
Thanks & Regards,
Esha Abdullah M
Edited by: Esha Abdullah on Sep 21, 2011 7:44 PM

Hi Ludek,
Thank you your positive reply...
I have using Development machine, as per you suggested sample application link, i have downloaded you mentioned project (vbnet_win_SimplePreviewReport) and run the project its working fine.
i don' t know where is there problem, i have used same dll files & same coding method, but since i got error,
i think when i call that project , that time also showing error, i have installed Crystal Reports for .NET Framework 4.0 .
Please look at the below i mentioned calling menthod & code, PLEASE PROVIDE ME A SOLUTION FOR IN THIS ISSUE.
GpsMg32::REPORTVIEWER ^dlg = gcnew REPORTVIEWER(sReportPath,1,sWindowTitle,1,2);
dlg->Show();
Reportviewer. h file
REPORTVIEWER(CString sReportName,
                                      const int& nOutputTo,
                               CString sWindowTitle /=""/,
                                      short nCopies /=1/,
                               const int& nOrientation /= DMORIENT_LANDSCAPE/);
Reportviewer.cpp file
   CrystalDecisions::CrystalReports::Engine::ReportDocument^ reportDocument = gcnew CrystalDecisions::CrystalReports::Engine::ReportDocument();
                            reportDocument->Load("C:
Crystal
CRNET
vbnet_win_SimplePreviewReport
vbnet_win_SimplePreviewReport
World Sales Report.rpt");
                            crystalReportViewer1->ReportSource = reportDocument;
                            Application::DoEvents();
THANKS IN ADVANCE

Crystal Report Viewer Microsoft JScript runtime error

When I use the crystal viewer control to render a report on the screen I receive the following error message:
Microsoft JScript runtime error: Object doesn't support property or method 'isObject' ... and the following line is hilighted:
if(!bobj.isObject(json)).
Here is the markup for the test page I'm using
{<body>
<form id="form1" runat="server">
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="true" ReportSourceID="crSource" />
<CR:CrystalReportSource ID="crSource" runat="server">
</CR:CrystalReportSource>
</form>}
I believe I set all info on crSource correctly (report path etc ...) because If I remove the Crystal reports viewer from the page and just use the crsource (i.e crptSource.ReportDocument.ExportToHttpResponse ...) I can export the report OK. Its only when I have the crViewer on the page Is when I recieve this error.
Web Config
<assemblies>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<controls>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web" tagPrefix="CR" />
<http handlers>
<add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
appsettings
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
I am using crystal reports 2008, visual studio 2008, windows 7 pro, MS Sql Server 2005, IE9
I uninstalled crystal reports, and reinstalled crystal reports 2008 sp3 (Full build) - No help
When I goto help about visual studio it says crystal reports 2008 (No specific version info)
Assembly cache on the machine has
12.0.2000.0 and 12.0.1100.00 as the vast majority ... a few (Design and Engine) have older 10.5.3700 and so forth (There are so many)
I found this problem on the web with different solutions involving frame work folder or not having IIS setup to server the crystal reports viewer ... this is happening to me on my local development machine using the ASP.Net Develepoment server included with VS2008 ..
Any help you could give me would greatly be appreciated
Thanks in advance
Kevin

Hi Kevin,
Take a look at below SAP Note.
[1531003 - Error: bobj undefined - javascript error |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333331333033303333%7D.do]
I got this result just by searching 'bobj is undefined javascript' in the top right search box.
Thanks,
Bhushan.

How can I free my Elements 5 Organizer from a "Runtime Error!" message that won't quit?

I recently installed Elements 5 on my new Windows 7 computer, and I've spent many hours re-creating hundreds of stacks and tags that I developed on my old XP computer. Elements 5 has worked perfectly well for several days. But when I asked it to re-connect with missing files and it started looking for a file that was in a folder that I had changed the name of after importing it from my old computer, it was taking a very long time, so I tried to get it to just quit. Instead, I now thave a message that reads, "Runtime Error! This application has requested the runtime to terminate it in an unusual way. Please contact the application's support team for more information." Even though I can get Windows to close the program, the same message comes up when I re-start Elements 5, even after shutting down the computer, and the program can't be used. How can I get rid of that message and keep all the work I've put into my stacks and tags, which would be lost if I uninstalled? Please help!

Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Km development runtime error

Similar Messages

Maybe you are looking for