Kuler needs a help section ...

... because I simply don't get it how it works.
How can I get the HEX values of the colors?
How can I store a theme in MyKuler?
How can I transport themes over to Dreamweaver 8? (With CS2
applications it works fine.)
Kind regards
Wolfgang

Hi there,
Thanks for your suggestion. We're working on it. For now, let
me try to address your questions.
HEX values can be moved to your HTML files via a copy/paste
workflow. While you are in Create, simply highlight the HEX value,
copy it and paste it into your application.
When you select "save" in Create, you are saving your theme
(privately) to Mykuler. When you select "publish" in Create, you
are sharing your theme (publicly).
At this time, there is no direct way to transport themes over
to Dreamweaver 8 beyond the copy/paste workflow I described above.
I hope this helps.
Lydia

Similar Messages

I have a few songs that I purchased that either will not play or play for a minute and quit. None of the suggestions in the Help section apply to me. What do I need to do?

I have a few songs that I purchased that either will not play or play for a minute and quit. None of the suggestions in the Help section apply to my problem. What do I need to do?

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please try to remove all program rules for firefox in your firewall and let it detect the program again: [[Fix problems connecting to websites after updating Firefox]]

I need Fusion help creating a demo of BRM JCA Resource Adapter

I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.

I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.

I Need Dire Help Making a Flash Form

Hello, I need some serious help creating a Flash Form.
I Have used a template from another site with the following
input boxes:
Name: __________
Email: __________
Comments: ____________
However, i had the script working fine, along with its php
script,
when i was trying to add more "text" boxes, i must have
messed the script up somhow.
When I submit that form, the name is send and email, but the
email is blank.. ie, there is no "comments"
here is the code:
on submit button:
on (release) {
// send variables in form movieclip (the textfields)
// to email PHP page which will send the mail
form.loadVariables("email.php", "POST");
sent email messege
onClipEvent(data){
// show welcome screen
_root.nextFrame();
and the php script (mailer.php)
php form email.pho
<?php
* PHP 4.1.0+ version of email script. For more
* information on the mail() function for PHP, see
http://www.php.net/manual/en/function.mail.php
// First, set up some variables to serve you in
// getting an email. This includes the email this is
// sent to (yours) and what the subject of this email
// should be. It's a good idea to choose your own
// subject instead of allowing the user to. This will
// help prevent spam filters from snatching this email
// out from under your nose when something unusual is put.
$sendTo = "[email protected]";
$subject = "My Flash site reply";
// variables are sent to this PHP page through
// the POST method. $_POST is a global associative array
// of variables passed through this method. From that, we
// can get the values sent to this page from Flash and
// assign them to appropriate variables which can be used
// in the PHP mail() function.
// header information not including sendTo and Subject
// these all go in one variable. First, include From:
$headers = "From: " . $_POST["firstName"] ." ".
$_POST["lastname"] . "<" . $_POST["email"] .">\r\n";
// next include a replyto
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
// often email servers won't allow emails to be sent to
// domains other than their own. The return path here will
// often lift that restriction so, for instance, you could
send
// email to a hotmail account. (hosting provider settings may
vary)
// technically bounced email is supposed to go to the
return-path email
$headers .= "Return-path: " . $_POST["email"];
// now we can add the content of the message to a body
variable
$message = $_POST["message"];
// once the variables have been defined, they can be included
// in the mail function call which will send you an email
mail($sendTo, $subject, $message, $headers);
?>
If anyone can see why the "comments" section is not being
sent?
Also: My original problem was how do you add more text boxes.
I want something like this:
Name:
Address:
Phone:
Mobile:
Email:
Website:
Comments:
Ive spent days and days trying to work out how to first make
a form that actually works, then add more text fields
Ive looked at many basic form tutorials, but they all seem to
only have 3 or 4 text fields.. Name, Email, Comments... etc
I haven't a clue how to edit the script both in action script
and php to add more fields easy.
I really need some help with this, its turning into a
nightmare for me.
I can provide someone with my .fla project file if they care
to take a look at what im doing wrong.
Thanks
Pan
ps. Please note: "$sendTo = "[email protected]";" =
this line i know i must put in my own email.

This is all about timelines. It seems there is a movieclip
named 'form' (or possibly an actionscript object, can't tell). Any
variables created on that timeline are sent.
So you could have your new textfields on another timeline.
Or you could have textfields with no instance name in the
form timeline.
Those are the first two things to look at. Post the FLA and
we can tell you more specifically.

We need a new section entitled: Issues With Apple Customer Service

"This Feedback about the Discussions forum is intended for questions about how to use Apple Discussions and for general constructive feedback about how the Discussions system is operating or how it may be improved. Please use this forum appropriately. Failure to do so may result in your posting privileges to this forum being disabled.
If your question concerns a hardware or software technical issue, please do not post in this forum — instead, go to the Apple Discussions Homepage, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the Post New Topic link. "
Alright, I have a suggestion for improvement. We need a new forum section for complaints about the way Apple is treating us.
To make sure I'm being clear, let me give you an example of just such a post that may be included in such a section.
I ordered online the family packs of Leopard, iWork '08 and iLife '08 on November 6th. I received an email telling me my order had been shipped on November 7th.
On November 9th I decided to check the progress of my shippment by logging on to FedEx. To my surprise, it had been delivered! Not to me but another party. I could download a PDF from FedEx and see the signature.
After trying to deal with FedEx for a few days I was finally told to deal with Apple because they would have to initiate the investigation. Fine. These things happen.
On 11/13/2007 I spoke with an Apple Customer Service Representative and received an Apple Issue Number and Case Number. I was told that it should be resolved in a few days. It wasn't.
11/20/2007, Here's where it gets interesting. In talking with them again I explained that since my signature was not on the FedEx ticket it had not been delivered properly if at all. I explained that since FedEx was clearly at fault the package should be shipped again. Finally they agreed. I was told that my package would be shipped and to expect an email.
11/23/2007, I was told again that nothing would be shipped until after an investigation had been completed. So did they lie? I spoke with a manager who kept repeating that he was sorry for the mis-communication. That became very frustrating to say the least. Remember, FedEx requires a signature. Without it or my permission to deliver somewhere else they must deliver to me and get my signature. The FedEx PDF clearly shows another persons signature.
Equally frustrating is the fact that they will not keep me informed as to the status. I have to call them and wait on hold. I did get a couple of emails with text along the lines of, "We continue to work with our carrier on your lost package. "
However, there is no way to reply to these form letters. The only way to stay in touch with Apple is to call and be put on hold.
Twice, after giving them my order number and being put on hold "while they look up my records" or whatever, the call was disconnected. I'm not saying they did so on purpose but the results were the same. Another call, another round of giving my order number and explaining to yet again a new person the details of the situation.
I've had many problems with Apple since becoming a customer in June of 2006 but I just can't let this go. I need a place to warn others. If you buy something, you might be better off buying it from a store instead of on-line. This kind of information is needed to warn others concerning the business practices of Apple should something go wrong. This is why we need a new section for putting forth such complaints.

It seems to me that the real problem here is with FedEx, as I have encountered similar types of problems with them in the past. Even though a signature is required, I have had packages left on my porch. When I enquired, someone had actually signed (i.e.forged) my name! Other times it has been left on my porch with some other signature. When I call to complain, FedEx just seems to think there is no problem as long as I got my package. They seem totally unconcerned even though a signature is required and I definitely did not authorize delivery with no signature. I have expressed my concerns directly to Apple, but have no way of knowing if it has done any good. I think this problem is worse with FedEx ground, as that is contracted out. Around here anyway, i think the drivers will sign the ticket and leave the package just so they won't have to make another trip. It's not right, and it's not supposed to happen this way, but i know it does.
Apple entrusted your package to FedEx in good faith that it would be delivered to you, and that your signature would be required for you to receive it. That should have resulted in you receiving it. however, due to a false signature, you did not. Clearly, FedEx is responsible.
If the package was supposedly delivered to your address, but has a false signature, I wonder if the driver might have signed the delivery ticket or gotten someone else to sign it and just left it on your porch or something like that. If so, it could have been subsequently stolen. If something like this happened, it might explain why things are so bogged down in the investigation at Apple. From their viewpoint, the package was delivered and a signature was obtained and they are probably being stonewalled by FedEx.
A user to user discussion forum such as Apple Discussions won't help with delivery problems. It's best to report them directly to Apple as you have done. If you continue to have problems, you can call Apple and ask to speak to Apple Customer Relations. They may well be able to cut through the red tape. You could also express your concern in the "Feedback to Apple" section. Maybe if enough people complain, they might consider awarding the shipping contract to someone else. Or perhaps the other shippers are even worse.
One of my recent shipments was evidently lost in a typhoon. But when I called Apple, a replacement was sent out immediately. This is more what I would expect of Apple, and you have every right to expect similar treatment.
If FedEx delivered to the wrong address and got a wrong signature, they should be expected to go back and retrieve the package. But if they delivered to your address and did not get your signature, then you would be well within your rights to go to your local Better Business Bureau and file a complaint against FedEx. That might possibly get some action of some sort. FedEx cannot ignore the BBB as easily as they can ignore you. If your signature was actually forged, you will certainly be able to prove that the signature on the delivery ticket is definitely not yours. And you could forward the BBB complaint to Apple. I don't know if this would help or just muddy the water, but it would put a little more pressure on FedEx I would think.
In the meantime, I would certainly speak to Apple Customer Relations and see if they can help you out here. They want happy Apple customers, and I think they would like to know about the extreme frustrations you are experiencing through no fault of your own.
I sympathize with your problems, and I hope that you are able to get them resolved soon.
Good luck!

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.

Preview Help Section.

How to easily merge PDF documents
This desperately needs to be included in the Help Section for Preview
If you have lots of pdfs to merge.
From “Finder”, select and click all the pdf’s you want to assemble.
This will open them all at once in “Preview”.
Pick the “File” dropdown menu .
Pick the “Print” dropdown menu.
In the lower left hand corner, click the arrow next to “PDF”.
Click “Save to PDF”.
This will save all the separate pdf files into one pdf document.

Talking to the choir here. This is a volunteer community.
Best posted to: apple.com/feedback

My bookmarks disappeared when I updated firefox. I've gone through all the help sections and I can't get them back.

I've tried everything in the help sections on the firefox website. I've tried on multiple occasions to get into the live chat to talk to someone, but its always either closed or I can't get anybody to respond.

Is this how you do it?
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

Cannot find the proxy server even after following the advice in the help section

I successfully downloaded the latest version but I cannot connect to the internet. I get a "cannot find the proxy server" prompt. I have followed the advice in the help section but nothing seems to work.

You can check20the connection settings here:
*Tools > Options > Advanced : Network : Connection > Settings
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

Help section - /** */ ??

Hey,
I know this is a weird question but does anyone know how to create a help section? I'm trying to create something like the help section JGrasp has.
Any info on this would be great.

nothing special about it - I just thought it would be
handy. I want to have a menu type structure. Have
you any idea how to do this?help for what, though? your own apps, presumably. good way to do it is to write it in HTML, and use JEditorPanes to launch it in, or even an embedded browser. you could also go way over-the-top like Eclipse, and use both an embedded browser to display it, and an embedded tomcat to serve it up. if you were feeling particularly masochistic, anyway. but HTML help is your best bet. most "Help" is HTML, one way or another. it means your documentation doesn't need to be written by a programmer

Need some help with Calendar on my iPhone.

Ok folks. Need some help and it may be basic, but I'm struggling with it.
My wife and I both have iphone 5's. Both phones share one iCloud Id and one Apple ID.
So, how do we share information across the apple calendar app?
If I add something to my cal. It does not go to her. How can we get them to sync?
Please help!!!
Thank You!!

Two things to check by putting the two iOS devices side-by-side. First, check in Settings > iCloud to assure that you are indeed both using the same iCloud login. Also, check that calendar is toggled on.
Then, check Settings > "Mail, Contacts, and Calendars". Scroll down to the calendars section and assure that your iCloud calendar is set as the "Default Calendar".
Then, check that Settings > "Mail, Contacts, and Calendars" > "Fetch new data" is set to something suitable. Note that "Push" will be best for iCloud.
Lastly, open Calendars app, touch "Calendars" at the bottom, and assure that iCloud calendar is checked so it is visible.
Then give you calendars a try again making sure that you are posting calendar events in the iCloud calendar.
Hope this helps.

In serious need of help. Can't uninstall Coldfusion 8

I installed coldfusion 8. I set myself up with an administrator account. I'm on an Acer windows vista 32 bit computer. All the updates for windows are installed. When I try to uninstall CF8 it tells me that I don't have enough access....I'M THE ADMIN!! Two questions: WHY is it doing this and HOW do I fix this? I have the CFMX Application Development book (6) and MX Studio. So I thought I'd get back into it. I really need some help here.

On Windows Vista you never have full administrator rights. Even though you have an administrator account, only the user named Administrator has full rights and ownership over the system (kind of like the root account on Linux). However, you can bipass this, by turning off the UAC (User Account Control) witch gives you full access to the system. To do this, go to the Control Panel and switch to Classic View. Go to the User Accounts section and click on "Turn User Account Control on or off". Uncheck the Use User Account Control checkbox and click ok. After rebooting your system, you should have full access. I recommend turning UAC back on after you solve your problem (I hope it solves the problem), but it's up to you. Please let me know if this does the trick.

In Hotmail, my "To:" button does not work and I can't attach any files. Their help sections said to contact you to help solve my problem. Help.

In my Hotmail account I am unable to use any of the buttons like, the "to" button, or the "attachment" button. At the Hotmail help section, they suggested contacting my browser help service.

Sounds like your drop did break something. You can go to an authorized Apple service center and get it repaired. I believe the out of warranty costs for repairing an iPhone 4 is about $149, but you would need to check with them to be positive. If you have Apple Care+ and it's still active, you should be able to use one of the $49 events to get your iPhone repaired.

Hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher"

hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"

you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090

Need some help learning cue points, etc

I need some help with a Flash project I'm working on. If any
Flash junkies out there are up for sitting down with me through
email or IM and helping me get to the point where I have a template
FLA doing what I want to do, I'd be willing to pay you. It wouldn't
be much, but it would be something. Here's what I'm trying to do:
I need to create an interactive talking-head style flash
presentation with a number of progressive download externally
linked FLV files, playing in succession, supported by movie-clip
text animations and supporting graphics which are triggered by cue
points in the video. I also need a simple navigation menu linking
to the FLV files. I've got some of this down already, namely, I've
laid the FLVs in and they are playing in succession. I'm stuck on
the cue point part. At this point I really just need some hands-on
help. I've bought books, I've scoured the web.
I'm easy to communicate with, and I'm good with computers and
comfortable in many multimedia design programs. Flash is very
powerful, but tougher to learn than I expected, and I'm at the end
of my rope =P

My advice... start with a very simple "proof of concept" project before you attempt the entire package.
It will be much easier to scale up if you first have a very good understanding of what's going on.
So one simple video with just one cuepoint and only one button and additional display. You'll also have to work out the interaction of pausing the video when a cuepoint is reached or button pushed to display the graph, giving the viewer time to read the graph... then when the viewer closes the graph, the video should "resume".
Start very simple and build on that only after you understand the fundamentals.
Second, you mention "video reports"... plural. So that most likely means that you will need a video player with a "playlist".
This may mean that you'll need to learn to use a little .xml to bring in the playlist data. You may also find xml an excellant way to bring other data into you project.
At the link listed above there is an excellant tutorial on "Integrating Flash and XML"
"Flash and XML"
"XML Video Playlist"
"ActionScript 3 XML Basics"
"ActionScript 3 Advanced XML"
Personally I would not even begin a project like this without considering how I could use xml to feed data into the project.
Here's an example of a video player I created that has a playlist, thumbnails, categories, transcipts, "Now Playing" etc. All that data comes into the main .swf via various xml files. Super good way in input data into Flash.
http://www.drheimer.com/video/
Yours is a rather ambitious project and will take awhile to gain the skill and assemble the pieces. So when you come to a new part... first create a real simple "proof of concept" model so you can learn how that section works. Don't expect to be able to assemble the entire project all at once.
Best wishes,
Adninjastrator

Kuler needs a help section ...

Similar Messages

Maybe you are looking for