Labels are not aligned properly when printed using HP5610

Hi ,
I am trying to print Avery J8160 labels using my HP 5610 Officejet. I am using official Avery templates and have checked all printer settings, there are no issues.
Everything is fine if I use plain paper but if I use Avery label A4 sheet, the alignment goes out. It's as if the label paper is not being drawn into the printer properly. All print settings are fine. I have contacted Avery and they have no explanation. Avery infact said that there is issue of alignment with printer and contact HP for finding solution. And they said most probably its something to do with printer treating both papers differently and some kind of skidding on rollers or something else resulting into this issue.
I have just done a quick test, I removed top row of labels and then feed the sheet and everything is fine. To me somehow seems that its thickness of label sheet and somehow printer start printing before actual print area on sheet starts. While in case if paper is thin (normal paper or top row of labels removed) , everything is fine.
Any help would be great, I have already wasted many sheets of labels.
regards
Maninder

Which SQL client and Linux version are we talking about?
Assuming you are using the Oracle sqlplus client... it does not support command line editing and history using the arrow keys. For this to work you will have to install a product called Readline Wrapper. See my answer at the General Database forum:
sqlplus command line editing

Similar Messages

Avery Barcode labels does not align properly when printed from Adobe Reader 11.0.0

Hi,
I have barcode labels in a PDF (Version 1.4, Acrobat 5.x). PDF producer is PPAlambic(Distiller). When I try to print the PDF on to Avery 5160 sheet containing 30 labels (10 rows; 3 labels in a row), always the barcodes on the first column goes beyond the left margins and hence does not print the full barcode. PDF size is 8.5" * 11" .I have tried following options in Print dialog box:
1. Actual Size + Portrait + Letter size
2. Shrink oversized pages + Portrait + Letter size
3. Fit + Portrait + Letter size
None of the above options resolved my issue.
When I open the same PDF in Adobe Reader 11.0.07, it prints perfectly. Does someone help me understand if this is a known defect in Adobe 11.0.0 and is there any workaround in 11.0.0 itself to adjust the alignment?
Note: PDF is not editable as it comes from a third party vendor. Please help.

Hi,
I have barcode labels in a PDF (Version 1.4, Acrobat 5.x). PDF producer is PPAlambic(Distiller). When I try to print the PDF on to Avery 5160 sheet containing 30 labels (10 rows; 3 labels in a row), always the barcodes on the first column goes beyond the left margins and hence does not print the full barcode. PDF size is 8.5" * 11" .I have tried following options in Print dialog box:
1. Actual Size + Portrait + Letter size
2. Shrink oversized pages + Portrait + Letter size
3. Fit + Portrait + Letter size
None of the above options resolved my issue.
When I open the same PDF in Adobe Reader 11.0.07, it prints perfectly. Does someone help me understand if this is a known defect in Adobe 11.0.0 and is there any workaround in 11.0.0 itself to adjust the alignment?
Note: PDF is not editable as it comes from a third party vendor. Please help.

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

Accents are not being shown when printing

Hi.
When I print a webpage that contains characters with accents some of than simply disappear, even though the page is displayed correctly on the browser.
This happens especially in uppercase letters.
Does someone know of some configuration I can make to solve this problem or if there is a bug involved?
I'm using Safari for Windows 7, version 5.1.7.

Hi,
Refer to this link...[box not seen in smartform print |box not seen in smartform print]

Fonts are not showing properly when opened through mail?

When sending a PDF via email the Frutiger font does not appear properly on an iPad or iPhone. When viewed on an iPhone all the text appears as gradient boxes and when viewing on an iPad font becomes too light to be legible. Is this a problem with the font in the iOS platform? I also tried opening the file in iBooks and got the same outcome.

Does disabling hardware acceleration have a positive effect or is it still happening?
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Some frames are not being shown when printed but it is there in print previ

Hello Experts,
I am currently developing a form in smartform wherein I need to put frames in all cells. When
I print preview, all the frames are there. But when I print it, some of the frames are not shown.
What could be possibly the problem?
Thank you guys and take care!

Hi,
Refer to this link...[box not seen in smartform print |box not seen in smartform print]

Fonts are not displayed properly when Book assembled for PRINT Preview

I am having an issue with fonts not being displayed correctly within Aperture Book design application. I have used a script font (Snell Roundhand) for the cover of my book that has quotations marks around the title. However the quotations marks that are displayed after the book is assembled, go to the default Times Roman not Snell. They do not match the Snell Roundhand font quotations that are supplied with that font. What gives? Also . . . after they the dust cover is displayed the next page is the hard bound foil page which displays Times Roman for the title . . . not the font I have selected (Snell Roundhand). What gives with that? Is there a way to change the font before it goes to the printer. Any work around ideas. I have tried several different fonts to see if anything else comes close. Everything looks like a variation of Times. HELP . . . trying to hit PURCHASE BOOK . . . . hopefully without flaws!!

I kind of remember the foil letters might be fixed - cannot remember but here is a related conversation that might help (or not)
[Aperture Cover Fonts|http://photo.rwboyer.com/2009/04/16/aperture-books-hardcover-title-font>
RB
Ps. I have not done this through the Apple book printing service myself - I always order soft cover as give aways and use another service for other printing but live vicariously through others withe the Apple hardcover books.
Message was edited by: rwboyer

Some of my AOL mails are not loading properly when using Firefox, they do come up when I use the AOL desktop, but they are S O SLOW

I have been using Firefox for a long time now since AOL became
S O SLOW with their Desktop Version in loading up mail.
But in the last two months I have been loading my AOL mail and some of mine and my husband's do not come up at all, even when they are forwarded by other people.
The header is there and it says the mail was loaded, but nothing in the actual page comes up

OK you need to upload these images to your remote server because they are missing from the server or that they have gone to a different folder.
http://www.elchocomining.net/double%20drawings/Florentino.jpg
http://www.elchocomining.net/double%20drawings/Mujer+matracaA.jpg
http://www.elchocomining.net/drawings%20/DJMujerarreglandocanal.jpg
http://www.elchocomining.net/drawings%20/DibujoProhibido.jpg
http://www.elchocomining.net/drawings%20/LTCocinaA.jpg
http://www.elchocomining.net/drawings%20/BbTrilladoradeArroz.jpg
http://www.elchocomining.net/drawings%20/TallerCoserA.jpg
In future always define your site correctly with all folders and file names without spaces in them. For example "drawings 20" is not a good name. You should rename it to "drawings20".
When you have corrected this especially when you have uploaded the photos again then they will appear all right on the page. after that you need to validate your pages for correct HTML and CSS but this can wait for now.
Good luck.

Up and down arrow keys are not working properly when using SQL CLI on Linux

Every time I hit up, down, left, and right arrow keys to return to a previous sql command I got ^[[D, please any hints to fix this issue?
The backspace works fine with me. I tried to use stty to fix this issue with no luck.
Thanks
Mohamed

Which SQL client and Linux version are we talking about?
Assuming you are using the Oracle sqlplus client... it does not support command line editing and history using the arrow keys. For this to work you will have to install a product called Readline Wrapper. See my answer at the General Database forum:
sqlplus command line editing

Pdf document not sized properly when print is intiated from Outlook Quick Print

I have some pdf documents that print properly (fit on printed page) when the PDF is being viewed within Adobe Reader X (10.1.4) and I initiate printing from right within Adobe Reader. However, when the same PDF is printed via Outlook's "Quick Print (with the job being routed to Adobe Reader but not initiated by Adobe Reader), the resulting PDF printout is slightly shifted and sized incorrectly.
Any ideas as what the problem might be? We're trying to set things up so that PDFs sent to a special Outlook email address are automatically printed without user intervention.
Thank you.

I believe the PDF you are trying to print is "larger than A4 in size". When we explicity open Reader and print the pdf doc then it scales down the pdf page size but when you print directly from outlook then it prints as per the original size of the document.

Shipping / Mailing labels are not working properly in PayPal.

Just spoke with PayPal in Arizona and it seems Windows 10 isn't doing what we expect when in comes to creating Shipping Labels using PayPal. The label prints with VOID and SAMPLE even though the other information is correct. Anybody any experience. I've tried Firefox, IE, Edge........none are working properly

Please see: https://discussions.apple.com/thread/5335795?tstart=0

JSF Pages are not rendering correctly when loaded using Non JSF actions

Hi All,
This problem is irritating me and I am posting the same query for the third time here.
When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
How to resolve this issue?
or
Is this Bug of Sun's Implementation of JSF Framework.
Thanks,
Sudhakar

Hi Sudhakar,
There is a discussion about refreshing a page, Take a look at the below thread
http://swforum.sun.com/jive/thread.jspa?threadID=55660
Hope this what you are looking for
MJ

APD - Column Headers are not displaying properly when downloaded

Hi All,
I am trying to download a simple query as a comma delimited file on my desktop using APD.
When I execute the APD, the all the data getting properly downloaded as required but I am facing the following problems.
1) The column heading are coming as garbage characters particularly for keyfigures
2) The keyfigures are getting displayed first and then characters, I expect them similarly the query display
3) I don't want to display the UNITS of the keyfigures to be displayed.
Please let me know if anybody has idea on this.
Regards,.
Tapan

Hi Tapan,
Try using "Hide or Rename Columns(projection)".
This allows you to rearrange the order of columns in file and also to rename the descriptions as needed.
Regards,
Vidya Sagar

Insert SQL does not work properly when called using CALL

I have a stored procedure (TEST_SP) which is used to insert a record in this perticular case. The SQL statement is 2526 characters long. I'm using
dim Params : Params=chr(1) & "Insert query" & Chr(1) & "=300"
runsql=&"{call TEST_SP(?,?)}"&Params
dim db : db=dbSelect("",0,"","")
dbExecSQL db,runsqlto execute the stored procedure. I'm facing an issue when the 2000th character on the insert SQL (pUPDSQL) is a single quote, where the SQL is not getting executed (i.e. record is not getting created).
The same stored procedure and the same SQL when run as below
runsql=runsql&"DECLARE "
runsql=runsql&"PUPDSQL VARCHAR2(4000); "
runsql=runsql&"PRES VARCHAR2(300); "
runsql=runsql&"BEGIN "
runsql=runsql&"PUPDSQL := 'INSERT query..."
runsql=runsql&"PRES:=300; "
runsql=runsql&"MRT_LKIDFULUP(PUPDSQL => PUPDSQL,PRES => PRES); "
runsql=runsql&"END; "
dim db : db=dbSelect("",0,"","")
dbExecSQL db,runsqlis working fine. Does anyone know if there is a limitaion in ODBC Call function or any explanation to above behaviour? I'm connecting to a Oracle 11g database using Microsoft ODBC for Oracle driver on Window 7
The stored procedures:
create or replace procedure TEST_SP(pUPDSQL IN VARCHAR2,pRES OUT VARCHAR2)
AS
BEGIN
DECLARE
emsg VARCHAR2(100);
BEGIN
if pUPDSQL<>'-1' then
emsg:='Cant exec UPDATE';
EXECUTE IMMEDIATE pUPDSQL;
    if SQL%RowCount=0 then
    pRES:='ERR:No row updated';
    return;
end if;
end if;
pRES:='OK:';
EXCEPTION
WHEN OTHERS THEN
   pRES:='ERR:' || emsg;
END;
END;Edited by: BluShadow on 11-Dec-2012 15:47
added {noformat}{noformat} tags for readability. Please read {message:id=9360002} and learn to do this yourself in future.

... I'm facing an issue when the 2000th character on the insert SQL (pUPDSQL) is a single quote, ...Perhaps you need two single quotes? like:
runsql=runsql&"PUPDSQL := 'INSERT query...Values(..,..,,,''This value in two single quotes'',..,...)' "
... I'm connecting to a Oracle 11g database using Microsoft ODBC ...Dump windoze ODBC and better use the Oracle client ODBC.
:p

Labels are not aligned properly when printed using HP5610

Similar Messages

Maybe you are looking for