Labor hours calculation inconsistency

hi
I am trying to get a std. price for two new models, however there is an inconsistency when the labor cost is calculated.
in CK11N .(CK13N) ( both plan estimations are in the same cost center )
(under cost of goods manufactured -- direct labor)
For one product cost estimation labour cost is showing as overall cell content and level cell content ,
where as another product cost estimation showing overall cell content, lower level cell content and level cell content
We would like to know from where this lower level has come for one product cost estimation in labor cost .
expecting a reply ASAP
thank you
kanna

dear rajesh
when we go into CK13N we will get display material cost estimate under costs tab
see cost of goods manufactured and double click on that we wll get cost components for materials in that go to direct labor and select and see the details ,
we will get group description under this
1) For one product cost estimation labour cost is showing as overall cell content and level cell content ,
2) where as another product cost estimation showing overall cell content, lower level cell content and level cell content
We would like to know from where this lower level has come for one product cost estimation in labor cost .
thanks and regards

Similar Messages

How to enter a non-oracle employee"labor hours in Oracle PA"

Hi Friends,
I have an issue that "need to enter outside Oracle employee (who has not entered as employee in HRMS, but working as temporary only) labor hours in PA" (11.5.10.2) for a perticular Project.
Thanks in advance
Surya Dev

Hi Dina,
Thanks for the reply.
we are using 11i (11.5.10.2) and I checked in the same tab "expnd/costing" tab only (in Setup > System > Implemenion Options). But there is no check boxes as "Import Contingent Worker Timecards with Purchase Order Integration" and "Interface Contingent Worker Labor Costs".
Is there any profile options related to enable these options?
Please advise.
Thanks,
Prakash

Daily working hours calculation but Half an hour flexi before start of planned time & shortfall hours calculation

Dear All,
I want to calculate daily working hours but Half an hour flexi before start of planned time & shortfall hours calculation if a person didn't completed 9 hours job.
We have different types of DWS, PWS & WSR for different PS/PSA & EG/ESG groupings.
We have a requirement for Executives/Officers (E0-E8/ S1-S2) for only one PSA (1100) for only one DWS(GFLX). In this requirement I want to calculate daily working hours but Half an hour flexi before start of planned time & shortfall hours calculation if a person didn't completed 9 hours job.
Please see the requirement and my configured DWS and PCR's in detail with example and suggest me the solution:-
Overview
I want to calculate (Please take the reference from DWS screenshot)
daily working hours, but starting from first Begin Tolerance Time
Shortfall of hours if 9 hours not completed, but again starting from first Begin Tolerance Time, although employee has come before Begin Tolerance Time
I've configured one DWS as below,
Requirement:-
The planned shift timings is 9:30 - 18:30. Employees should work and complete 9 hrs in a day, but this 9 hours should be counted only from 9:00 (i.e. Begin tolerance time). It means. In time should not consider before 9:00.
1. Suppose 1st day employee punch In time is 9:00 then he has to work up to 18:00, then only 9 hours of working will be completed & no shortfall will be calculated.
In above case, if Out time is 17:00 then shortfall will be calculated 1.0 hours, because his working hours will be counted 8 hrs only.
2. Suppose 2nd day employee punch In time is 9:45 then he has to work up to 18:45, then only 9 hours of working will be completed & no shortfall will be calculated.
In above case, if Out time is 18:00 then shortfall will be calculated 0.75 hours, because his working hours will be counted 8.25 hrs only.
3. Suppose 3rd day employee punch In time is 8:30 then he has to work up to 18:00, then only 9 hours of working will be completed & no shortfall will be calculated. (In between 9:00 - 18:00 ). Here In time is 8:30 but system should consider and count from 9:00.
In above case, if Out time is 17:30 then shortfall will be calculated 0.5 hours, although he has worked 9 hrs.
4. Suppose 4th day employee punch In time is 10:11 then he will be marked as Late Come(as per DWS) and then he has to work up to 19:11, then only no shortfall will be calculated, because he completed 9 hours.
Now the below PCR is calculating Daily Working Hours,
Now the below PCR is calculating Late Coming Hours,
Overview
I know that use of begin tolerance time is different in from my requirement. Please guide me if this DWS configuration will not work.
As of now system is able to calculate Daily Working Hours (but not from the begin tolerance time), Late coming days and Late coming hours, but shortfall is not getting calculate properly.
Please give me the idea how to write PCR for these requirement, I know that my ZDHR PCR (Daily Working Hours) needs to change or replace to fulfill this requirements.
If you want any other details please let me know.
Best Regards,
Deepak

Hi Sankarsan,
After changing the function PTIP and I used GEN in PAR2, because in PAR3 error was coming.
After the changes PCR is processing as below for three different IN time :
1. when IN time is 8:45
and in this case, ZES table No Time type is showing which is wrong because he worked from 8:45 to 18:30 it means 9:30 hours (calculation should start from 9:00 am).
2. when IN time is 9:15
and in this case, ZES table Time type 9002 is showing 9.25 hours which is correct because he worked 9.25 hours.
3. when IN time is 10:30
and in this case, ZES table Time type 9003 is showing 9.00 hours which is wrong because he worked only 8 hours.
Pls suggest.
Best Regards,
Deepak

Labor Hours and Machine Hours

Hi everyone,
Our manufacturing operation involves injection molded parts that have labor time and machine time structured. As operations department, we receive a daily schedule per molding machine we have but such schedule shows only the amount of parts to be produced and not its equivalent in machine and labor hours based on its routings. Basically we receive a list of Planned Orders to be produce in a daily basis with parts only.
In a previous experience in Oracle there was a report showing the order, parts, labor time and machine time requiered.
Is there a report in SAP that can reflect the same data?
Currently we are looking up into a routings spreadsheet but the problem is that is not accurate because routings may change for multiple reasons.
Thanks.
JB

Jorge,
This is possible in SAP also. But this needs enabling PP and timebooking functionality in HR.
In PP along with CO, the machines or the PRT are created as cost centers and teh costs will accrue to these cost centers. Similarly teh cost of the materials can also be accrued on a cost center. The labour hours can be captured by means of timebooking and linking every employee to a work center whichis again linked to a cost center. If these functionalities are enabled, then it is possible to see all the costs, activities and schedules used for an order, may it be production order, assembly order, or a service order.

Work Hours Calculation - ERROR

Hi All,
I'm having difficulty with the Work Hours Calculation in Project. It seems that when the number of hours within a subtask group exceeds 1000 hours, the display returns 1 hour. Whilst the Project Statistics for cost are correct, the number of hours is wrong!
Has anyone seen this error before and can help?
I would post piccy but Microsoft wont allow that yet.

Thanks for the reply Guillaume,
The Project version in question is 2007 SP3.
The issue occurs on every project that I am currently handling so it is causing me some troubles at the moment. I have even tried using the example you gave and it still does not work correctly.
Unfortunately until my account is approved I cannot post pictures however the following is the equivalent to your project above:
Project 1 67 days
Mon 15/12/14 Tue 17/03/15
1 hrs
Summary
67 days Mon 15/12/14
Tue 17/03/15 1 hrs
A 50 days
Mon 15/12/14 Fri 20/02/15
400 hrs A
B 67 days
Mon 15/12/14 Tue 17/03/15
536 hrs B
C 30 days
Mon 15/12/14 Fri 23/01/15
240 hrs C
D 10 days
Mon 15/12/14 Fri 26/12/14
80 hrs D
Many thanks,
Jon

Labor hours as part of cost estimate report

I'm trying to find the right report or table reference that can provide the activity quantity (labor hours) consumed for every SKU costed at the plant.
Any help on this will be highly appreciated

Dear Raja
If you are looking for report go to CK82
And if you are looking for the tables go to thread Table name to download CK11N costs
Regards
Rajneesh Saxena

Standard Labor Hours for a Operation

Hi, we are on 11.5.10.2 version of Oracle and I am need of locating in the database where I can find standard labor hours for an operation. Any help would be appreciated!

The std. labor hours are in a table called bom_operation_resources.
Try this
select msi.segment1 item
,bos.operation_seq_num OP_SEQ_NUM
,bd.department_code
,br.resource_code
,bors.usage_rate_or_amount
from mtl_system_items msi
,bom_operational_routings bor
,bom_operation_sequences bos
,bom_departments bd
,bom_operation_resources bors
,bom_resources br
where msi.organization_id=&org_id
and msi.segment1='&item'
and msi.inventory_item_id = bor.assembly_item_id
and msi.organization_id = bor.organization_id
and bor.routing_sequence_id = bos.routing_sequence_id
and bos.department_id = bd.department_id
and bors.operation_sequence_id = bos.operation_sequence_id
and bors.resource_id = br.resource_id
order by msi.segment1, bos.operation_seq_num, bors.resource_seq_num
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

Labor Hours in PM Datasources

Hello Gurus,
which of the datasources in PM gives me the Labor information like hours worked, Planned hours, Total Labor Hours etc.
Help is highly appreciated
Thanks in advance. Full points to correct answers

Look at cube 0PM_C04 (Maintenance Orders - Operations) which contains information on the planned and actual work for operations in maintenance orders, loaded from 2LIS_17_OPERATION (Maintenance orders - operations).

Labor Hour Formula

I need a formula to help me add total labor hours. I want to input shifts that total out at the end of the row. Example: Shifts will be input as Cell One 7.0-5.0, Cell Two 8.5-6.5 etc etc. That is a spread of 9 hours but I want to drop an hour for lunch. So 7.0-5.0 equals 8 hours. If I enter these shifts into 5 of 7 cells the last cell will reflect a total of 40 hours. Can this be done?

tnjc wrote:
Shifts will be input as Cell One 7.0-5.0, Cell Two 8.5-6.5 etc etc. That is a spread of 9 hours but I want to drop an hour for lunch. So 7.0-5.0 equals 8 hours. If I enter these shifts into 5 of 7 cells the last cell will reflect a total of 40 hours. Can this be done?
Actually, it already has been done. Take a look at the Employee Schedule template in the Business section of the Template Chooser.
There are a few caveats, though:
• None of the shifts can extend across a day boundary (midnight).
• All pairs of start and stop times must be attached to the same date. (The template uses pop-up menu cells to enter these times, and all items on these menus have the same Date part—which is not displayed.)
If the times available on the pop-up menus do not fit your requirements, the lists can be edited, with these two caveats:
• (1) If you edit one time, you must edit them ALL. you must edit ALL values on both a start time menu and a stop time menu, you must do all of the edits on the same calendar day (ie. start after 12:01 AM and finish the editing before 11:59 PM the same day), and you must replace ALL of the start and stop time menus with the two that you have edited.
• (2) Do not edit the "blank" item on either menu. There is no means by which a user can place a truly "blank" item as a menu choice, and any value you can place (such as a single space) will cause an error in formulas using the cell's contents. So edit all the 'time' values, but leave the "blank" one as is.
One other thing: 7.0 to 5.0 (7:00 AM to 5:00 PM) is a spread of 10 hours, not 9. With an hour taken off for lunch, that's 9 hours, not 8. Ditto for 8.5 to 6.5.
Regards,
Barry

Labour hour calculation in confirmation

Hi,
I have a scenario where one employee is assigned common to two capcities of one work centers.
While taking up production of two products in a same work center in two capacities how the labour hour would be calculated. Example:
Work center : W001, No.Of Individual Machine Capacities -2
No.Of Individual Labour Capacities -1.
Two Production orders released in work centers for the same time. One order is run for 6 hrs in a shift,another order is run for 8 hrs in the same shift(Means upto 6hrs both were in parallel,then last 2 hours only one order was ruuning),Labour performs both the orders in parallel as he manages both machines. How much is the labour time to be entered in CO11N confirmation for each order.

Hi,,
U can see the labor cost.But prior to that u have to mention the workcenter in the order and in work center u have to mention capacity of work center and mention the formula for cost calculation cost.all this have to first configure in work center prior to use in any order then order give u cost of the Labor according to Ur Order time confirmation your timing should be 6 hrs and 8 hrs as there are two order we want to calculate the cost of each order.
Regards,
R.Brahmankar

Daily working Hours Calculation

Dear All
Time Management - >Work Schedules->Set Work Schedule rules and work schedule
How to calculate the Daily working hours if my shift time is as given below
Night 00:25 to Morning 07:30
My break time is between 3:30 to 4:00
So my actual working hours is 6:35 hours (6 hrs and 35 min).
What i need to enter in the Daily working hours, whether 6.35 or 6.58 (0.25/15*35)?
regards
Suresh S

Hi,
First create a break shedule from 3:30 to 4:00 AM and specify if paid or unpaid.
Use this break schedule while creating daily work schedule. Specify the timings of 0:25 as start in planned working time, the end time will be calculated automatically.
Use this DWS in your PWS which you in turn use while setting WSR as you stated above. The Daily Working time will be automatically taken from DWS. And I think it should be 6:35 hrs.
cheers
Ajay

Code for employee worked hours calculation

Hello everyone,
I need some help with an ABAP code:
I have records coming in with Employee ID, Date and Worked hours along with some other fields.
I need to look up the employee id aginst another table to figure out if the employee depends to a particular state or not and the date is holiday or not from different table.
Also I would like to see if worked hours are more than 8 and put the extra hours into a differemt field for calculating if the total hours in a week exceed 40.
Can you please help with this code?
Thanks,
Raj

>
Raj Coppar wrote:
> Hello everyone,
>
> I need some help with an ABAP code:
>
> I have records coming in with Employee ID, Date and Worked hours along with some other fields.
>
> I need to look up the employee id aginst another table to figure out if the employee depends to a particular state or not and the date is holiday or not from different table--- u can use FM BKK_CHECK_HOLIDAY to find out the given date is holiday or not ? Also I would like to see if worked hours are more than 8 and put the extra hours into a differemt field for calculating if the total hours in a week exceed 40.
>
> Can you please help with this code?
>
> Thanks,
> Raj

CATS hours calculation error.

Hi All,
I'm having the following issue with CATS, using the transaction CAT2, I created 3 time entries:
08:00:00     08:25:00     duration 0.42 hours
08:25:00     09:25:00     duration 1 hour
09:25:00     12:00:15     duration 1.83 hours   This value is an error because it should be 2.58 hours, and I don't know why it is calculating this period in an incorrect way, and the other 2 entries in a correct way.
Thanks in advance.

Hi Fernando,
Please go to V_T550P and check whether there are any breaks defined for that time interval.
To check break schedule for your daily work schedule check table V_T550A.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Feb 15, 2010 4:04 PM

Very Simple Overtime Hours Calculation

I have no experience with JavaScript and need help with a calculation for a simple Acrobat time sheet.
I have a timesheet form that adds and populates a "Total Hours" box, and I would like to automatically populate a "Regular Hours" box and an "Overtime Hours" box (based on a standard 40 hours week).
ex: if "Total Hours" = 55, "Regular Hours" should read 40, "Overtime Hours" should read 15.
ex: if "Total Hours" = 30, "Regular Hours" should read 30, "Overtime Hours" should read 0.

Use this code as the custom calculation code of Regular Hours:
event.value = +this.getField("Total Hours").value > 40 ? 40 : +this.getField("Total Hours").value;
Use this code as the custom calculation code of Overtime Hours:
event.value = +this.getField("Total Hours").value > 40 ? (+this.getField("Total Hours").value - 40) : 0;

Labour Hour Calculated In BOM

Hello,
I have removed the routing from my PO and also from the routing tree for that materials,even after removing some of the Partial Stage labour hours are Picking??,How it is Picking the labour hours for the removed routing,but i have found few materials issued in that stages..whether the Labour hours liked with the materials??Pls clear...
Whether Labour hours are assigned to the materials or for the Process,if it is for the Process then how the LAbour hour is comming while doing cost analysis as the full material is not consumed in that Particular stages.
regards
Nandhu

Hello Abbas,
I did not completely understand your question but confirming on the labor item for BOM. It should be defined in the Item Master of type Labor. In the Inventory data tab set the valuation method to Standard and define a cost for the labor. A labor item in the BOM definition should be defined with issue method Backflush.
Suda

Labor hours calculation inconsistency

Similar Messages

Maybe you are looking for