Labview integration with SEL 421 specifically in terms of Phasor measurements

I am looking to get PMU data from a SEL421 relay into labview system using ethernet. I am a beginner and do not have much experience with communication blocks in labview. Can you please help me understand the concept and point me in the right direction.
Solved!
Go to Solution.

Hi, I have been using Hyper terminal for a while to communicate with the device and it works fine. I have also been using a custom software specifically designed for the SEL421 called the SEL Quickset software without any communication issues. I failed to communicate with the device using Mdbus/Jbus tester.
Issues with VISA test panels:
1. I did not find any device driver specifically for SEL 421 using IDNet.
2. When I try to read registers/send command using VISA test panels, I get I/O errors.
I have attached the some screenshots and SEL configuraton details as read from hypertrm.
Attachments:
sel421.txt ‏4 KB
Doc1.docx ‏923 KB

Similar Messages

LabVIEW programmer with modular instrumentation experience (short term) in NYC area

We have a requirement
for a short term (3-12 months) contract to develop LabVIEW based software
around modular Instruments (e.g. laser, APD, photon counting) hardware. The
work can be done part time or full time, but the person must be able to come to
the lab in NYC. The candidate should have significant knowledge and
experience. Send resume and contact information to [email protected]

Hi Mr Weaver
I found this message posted in March , I sincerelly hope you satisfied your needs for a labview programmer / analyst.
We are a group of three engineers dedicarted to the mechnical and electrical design of industriy solutions. Currently full time employed as a Sr test engineer with a firm in the Chicago suburbs, I develop applications in labview to automate testing for design validation which range from mechanical, electrical, functional, regulatory , environmental and RF including sound and vibration testing. I have been writing atomated test cases for the last 15 years in environments, using tools like high level text programming languages and Labview to integrate test equipment into automated test systems using RS232,USB,GPIB ports for high volume manufacturing testing of subassemblies and finish goods.
Our experienced electrical engineeer develops process control solutions around PLC, DCs and SCADA tools for the farmaceutical, food and beverage industries with proven record of oversees experience for the last 10 years.
Mechanical Engineer also currently employed as design engineer in the Chicago area with experience in design tools like Pro E, participate in the mechanical design of the integrated systems, drawings and schematics.
We can offer an integral solution to your current and future needs for engineering services.
Martin Ayala
[email protected]
(630) 596 3929

NI LabView integration with TSI TrakPro

Hi Everyone
I am a part of
a group of people trying to finish a senior design project this summer.
For our instrumentation we have a few TSI SidePak AM510 Particle
Monitors that we would like to integrate with National Instruments
hardware and LabView software. We will most likely use a Compact
FieldPoint system, but we aren't quite sure yet. I was wondering
whether anyone here has had experience integrating LabView with any of
TSI's instrumentation or hardware. Their software to use with the PC is
called the TrakPro, which seems to be able to be programmed with
HyperTerminal. If anyone can be of service we would greatly appreciate
it. Thanks.

Can you automate the particle monitor through its serial port?
        Actually, it only has a USB port. We are trying to look for older versions of the instrument that may have a serial port. I don't know if a USB to serial port adapater would work.
         Also, it doesn't seem like any DAQ has USB inputs, correct?
What functions do you want to automate?
        We need it to send the data for TSP/particle sampling of the cigarette smoke to the DAQ. It would be nice if it could read in the data and control the flow rate accordingly, but
        we're too behind on the project to be able to do that right now. I think it will be an open loop system.
What do you want to do with the data that comes back?
        We just need to monitor the TSP/particle concentration of the flow in the cigarette smoke that is flowing through our system. These will be set up at 3 sampling port areas in
        the system. Actually, we will need to do both sampling of flow and flow characterization, which will not be done simultaneously, but at different times.
How fast do you need your loop rate?
      The duration of each experiment will be around 4-6 hours. For this kind of experiment, maybe every minute, or five minutes, would be a good rate.
What else does your platform need to do?       We basically need a DAQ and Instrument control device. It is going to acquire data from other instrumentation and control flowrates as well.

How can one get FI postings number with a specific payment term

Hey everyone,
A short question on FI postings. I need to find postings, which include a specific payment term. I tried to check through the BSEG table but I can't filter the output with the parameter 'payment term' (field ZTERM). Any idea to get the info?
Thanks!
Stan B.

Hi Stanislas,
I think your search will be more efficiently if you search in table BSID for the open item customer document, BSAD for all the customer document.
You can select the company and the payment term.
Hope it will help you
Valerie

New LabHSM Toolkit - Agile development of complex event-driven maintainable LabVIEW applications with active objects / actors based on a universal Hierarchical State Machine / statechart template.

Dear Fellow LabVIEW programmers:
Most of the systems you deal with are reactive. It means that their
primary function is constant interaction with their environment by
sending and receiving events. But most likely, they can have something
happening inside them too, even when they are not processing messages
received from outside. So, such systems have to continuosly react to
external and internal stimuli. Right? Moreover, most likely, they
consist of subsystems that are reactive too and, in turn, can have
their own "life", to an extent independent from other parts (with
which they still communicate, of course). Reactive (event-driven)
systems are more naturally modeled with active objects. So, why then
should we try to model and code them with GOOP and its passive
("dead"!) objects?
"Flat" State Machines have been known for decades to have severe
limitations. It's been more than 20 years since Dr. Harel invented
Hierarchical State Machines (statecharts) to fight those limitations.
Then why does NI still tout the same old good Moore FSM as the
ultimate tool for event-driven programming in LabVIEW in its $995
State Diagram KIt?
The LabHSM toolkit we are happy to present, makes it possible to
easily create and then maintain complex event-driven applications in
LabVIEW as a collection of HSM-driven active object VIs using a higher
level of abstraction and agile software development methodologies.
These active object VIs are created based on a universal Hierarchical
State Machine ( HSM or statechart ) template. So. all your code looks
similar regardless of its functionality!
We all love just jump to code, right? However, to be good boys, we
need to do design first. Then implement it in code. If the logic is
modified we need to redo the design first and then redo the code. When
using LabHSM where behavior information is abstracted into a separate
HSM data file editable with a supplied editor, there is no need for
coding separate from design any more. The modified behavior becomes
code automatically as soon as the HSM file is saved. Design is code!
The implementation basically follows Dr. Samek's Quantum Programming
paradigm. (see http://www.quantum-leaps.com). However, as already
mentioned, LabHSM stores the behavior information in a file separate
from the code itself. It also adds state dependent priorities to
events, a separate queue for public events/messages, and, of course,
some LabVIEW specific code like capturing front panel user events and
putting them into the private Events queue. Communication and
instantiation functions are also rather specific for LabVIEW.
It is available for UNLIMITED PERIOD trial. Please visit
http://www.labhsm.com for details and download. The site also contains
references which you may want to check to learn more about
hierarchical state machines and active object computing.
Since this is our debut we will appreciate any comments and
suggestions. Our contact information is available on our site, of
course.
Have a G'day!

Symtx is currently hiring the following position. Please contact me if interested.
Amy Cable
Symtx, HR
[email protected]
Symtx, the leading supplier of functional test equipment, hires the brightest & most talented engineering professionals to design & manufacture complex custom electronic systems for advanced technology leaders in the defense, aerospace, communications, medical, transportation & semiconductor industries. Symtx’ challenging & dynamic work environment seeks to fill openings with highly qualified electronic engineering design professionals.The ideal candidate will be responsible for defining the requirements, software design and code development, and integration of test control software for custom functional test systems. Candidate should be familiar with data acquisition concepts, instrument control, complex test, measurement and calibration algorithm development and definition and implementation of control interfaces to hardware. Prefer familiarity with instrument control via GPIB, VXI, MXI, RS-232 desirable. Requires BS/MSEE and 3 -7+ yrs of experience in one or several of the following test applications in a Windows NT/2000/XP environment using Labwindows CVI, TestStand, Labview, Visual Basic, C++ and knowledge of RF systems is a plus. Job responsibilities will include software design, development, integration, team leadership, and interfacing with customers( includes PDR’s & CDR’s).

RE: Legacy Integration with PI/Open

Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

BW Report Integration with NW Enterprise Portal 7.3

Hi ,
I have integrated BI with Portal inorder to view the BW reports that was built on BW queries.
On viewing the report on portal we get to see cross-marks besides every tabs present on the report. Any specific settings needs to be configured for BW side.
Regards,
R. Rajesh
Edited by: Rajesh Rajan on Jan 13, 2012 11:33 AM

Hi Kumar,
I see these cross-marks on the report tabs which is shown on portal. Had a thought whether something to do with java plig-in but still no go.
Steps followed:-
1. Created a BW report.
2. Perfomed all the steps needed to integrate with portal.
My question here is any specific settings from BW side has to be configured generally if integrated with portal?
Regards,
R. Rajesh

CRM 5.0 Integration with Twitter and facebook

HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete

@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements?

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

SOA 11g Worklist Apps Customisation and Integration with Plumtree Portal

Hi,
We want to migrate an existing application build using SOA Suite 10.1.3.3 to 11.1.1.2.0.
In the 10g application the worklist application was customised and the customised apps was linked as a remote portlet in BEA Plumtree Portal.
1)In 10g the worklist application source code is available (\SOA_Oracle_Home\bpel\samples\hw\worklistapp) for customisation but is that possible for 11g ?
(The location of the default deployed worklist apps in 11g is /../mdw_home/user_projects/domains/soa_domain/servers/soa_server1/tmp/_WL_user/worklistapp).
Can we take the source code and customize in jdev and deploy under a different contextname in 11g??
3)Our existing 10g worklist was customised a bit in terms of look and feel and for some custom authentication and it was deployed in the 10g SOA Server.
A sample jsp application was created and the login page of the custom worklist apps was linked in a inframe so that it works when integrated with the Plumtree portal as a remote portlet. And this worked perfectly in 10.1.3.3 SOA Suite.
However the 11g SOA worklist login when tagged in a jsp as an inframe in plumtree portal is giving a warning message
Warning: Unable to load content in a frame. Frame content will load at the top level. On cliicking the OK button the worklist page is opening. This is with Firefox browser . however form IE7 or 8 its timing out from portal.
As per http://newsoalife.blogspot.in/2009/09/framebusing-in-adf.html
changing the web.xml for the worklist can help.
Can anyone please let us know on the same as this appeas an unsupported one.
Regards
Ashif

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Oracle BI Publisher 10x/11x Integration with Siebel CRM 8.2 Release

Hello Gurus,
We are in the process of implementing Siebel (8.2) Public Sector for one of our client and in term s of reporting we have decided to use latest version of OBIEE and BI Publisher and thus decided to go ahead with implementing BI Apps 7.9.6.3 combined package of (OBIEE 11.1.1.6, BI Publisher, Informatica 9.x, DAC 10.1.3.4.1 with hot fix).
There is My Oracle Support (MOS) article # 1172844.1 (titled ‘Supporting Documentation for Siebel Reports by Product Version’) which explains that Oracle BI Publisher 10.1.3.4.2 version supports Siebel CRM release 8.2.
Due to the limitations of the Oracle BI Publisher usage as per the Oracle support documentation, we need to make use of OBIEE 10g version for BI Publisher for integrating with Siebel 8.2 release and we need to also use OBIEE 11g for the main reporting and henceforth we end up maintaining 2 servers for reporting in our environment.
Does Oracle BI Publisher 11.1.1.5 or 11.1.1.6 version cannot be integrated with Siebel 8.2? Is this not supported version with Seibel 8.2 version?
Oracle BI Publisher architecture in 10g is different when compared to OBIEE 11g version and does it make any impact if we go ahead with 2 different versions pointing to pull the data from the OLTP source ( Siebel) ?
I am looking out for exact approach to be followed for reporting requirements for this kind of scenario ?
Help me with your inputs and suggestions on this.
Thanks
Praveen

hi Praveen,
Did you got any answer for this?
Cheers,
J

Reg_GRC 10.0 Integration with backend systems

Hi Everyone,
Could you please help me to find out which all of the below products can be integrated with GRC 10.0 Access control.
Click Schedule
PI System
BOBJ - CMS
BOBJ-DS-CMS
SAP Mobile Platform - Derby
Afaria
ADP
ARIS Cloud
SOLMON
Adobe Live Cycle
SAP Mobile Platform - Agentry
Click Plan
Click Roster
Success Factors - LMS
Success Factors - EC
Success Factors - Talent Management
Success Factors - Performance Management
Benefitfocus
BOOMI
KNOA
SAP Central Process Scheduling by Redwood
SAP Extended Diagnostics by CA Wily
SAP Quality Center by HP, enterprise edition, bundle
SAP Test Acceleration and Optimization
SAP NetWeaver Landscape Virtualization Mgmt enterprise
Thanks and Regards,
Naga.

Hi Hemant
SAP has made a lot of the transport functionality in GRC10. I find that they hereby created a huge expectation with the customer, that in fact is not true.
For instance Exclusion Objects and Mitigation Controls are NOT transported. What about Organizations? Critical Roles and Profiles are also not transportable.
As for the Connectors - system specific parameters are transported. Therefore you end up having to delete the DEV and QA connectors in the PRD GRC system.
On this question, has anyone used CLM yet? It seems that only Functions and Risks will be extracted to CLM and then deployed in the other system (DEV to QA for example). Does CLM even work?
SAP provide not guidance on all of these important issues. I agree that it is about time that SAP takes some leadership and produce a proper best practise guide for this software. By the way, an offical sizing document from SAP is still to be delivered.
Thanks
Will

Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL

Hi,
I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
BPEL DOMAIN : default
Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
So when I Configured the BPEL node property in Peoplesoft as :
BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
BPEL DOMAIN : default
I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
So I'm not able to proceed in this regard.
Any help in this regard is highly appreciated.
Thanks in Advance,
Girish
Edited by: user11214154 on Nov 23, 2009 8:12 PM
typo error

Hi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s)

CISCO IVR integration with Phoenix

I have phoenix application which is based on ISO 8583.
I have to integrate Contact-Center IVR solution with it.
I wanted to know, if such an itnegration was ever developed earlier and is it provided by CISCO or by 3rd party?
You can get more information about Phoenix from http://www.phoenix-interactive.com/.
Thanks

I know this already.
The problem is specifically about integration with Phoenix.
If you have or anyone who has some knowledge on the Phoenix side of integration as well.
What CISCO is offering, I know that.
But I want to know, if any real work for this integration has already been done.

Lync 2013 On Premises integration with Exchange Online Unified Messaging

I am working on deploying Lync 2013 Server on premises and integrating it with Exchange Online. We do not use Exchange on premises.
My question is how to integrate with Unified Messaging specifically. Other functions like Calendar, call logs seem to be working fine.
There are many guides online on how to do this, and I have read many and attempted to follow with no luck. All seem to assume that UM has already been deployed on prem which I don't have. Is this possible to integrate Lync with Exchange Online without having
and Exchange deployment on premises first.
Another source of confusion is the Office Voice Access number and how Lync clients dial voicemail. Where does this go if somebody dials internally (from Lync) and externally (from PSTN)? Exchange online or Lync on prem? And if Lync, then my guess would be
Lync forwards on to Exchange Online UM somehow. Do I have to purchase a number from somewhere because of it being on 365 or can I use a spare DID?
From my tests so far, when I call voicemail as any user, it seems to dial that same user and then the call fails.
Hopefully someone can shed some light on this for me.

You can integrate Exchange UM with Lync Server 2013.
Please check the deployment process at http://technet.microsoft.com/en-us/library/gg398968.aspx
Lisa Zheng
TechNet Community Support

Labview integration with SEL 421 specifically in terms of Phasor measurements

Similar Messages

Maybe you are looking for