LabWindows Version 8.5 and Version 6

Hi,
I have been using the version 8.5 of Labwindows to develop an application for our test equipment. Given that the application was supposed to be running on Windows NT an error message came up when trying to run the application and the operation was aborted. This is due to that is not possible to run application developped on 8.5 on windows NT.
So, we decided to downgrade the version used by using an old one (version 6) already owned by us. We would like to know if it is possible to run two different versions of LabWindows on the same machine without occurring in any issue.
Regards,
Andrea

Hi Andrea,
there are two possible scenarios, both of them can lead to satisfactory results.
As I have intended, you are trying to create an executable to run on the target machine: on a single machine executable built with different versions of CVI can run without problems. It is to be noted that you must install in the system the RunTime Engine corresponding to the most recent IDE you developed your application with; this unique RTE will be used by all CVI applications running on the system (there are no known problems in running an executable on a newer RTE). This scenario does not consider the problem you are facing regarding CVI8.5 and WinNT.
If on the contrary you are interested in installing two different IDEs on a single PC, this is again possible and has been satisfactory working on my machine for several years covering versions from 5 to 8.5. Some precautions are to be observed, though, as normally additional toolkits and DAQ or DAQmx detect the newer of the installed IDEs and connect to it, so if you want to have a machine on which more IDEs are installed, each of them with -as an example- DAQmx added, you must do the following:
1. Remove every NI software from the system
2. Install the older of the IDEs wanted (e.g. 6.0)
3. Install DAQmx (it will detect CVI 6.0 and install libraries in it)
4. Install the newer IDE (say 8.5)
5. Install DAQmx again: it will detect CVI 8.5 and install libraries in it
With this procedure you will have a machine installed and running, with the only problem that you will not be able to update DAQmx -in my example- by running its setup. If you need to do so I can point you to some forum message that address this situation too.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

  • Version 8.5 and Version 11.5 on same machine

    Post Author: ashleyp
    CA Forum: Older Products
    I've heard that loading version 8.5 and version 11.5 on the same pc can be done, but the loading needs to be done in a particular order.  Does anyone have experience with this?
    Thanks, Ashley

    Post Author: DPowell
    CA Forum: Older Products
    Assuming you are talking about Crystal Reports and not the Enterprise product, then yes, they can co-exist, and without any "tweeking".  You should install Crystal 8.5 first, and then 11.5.  Naturally, at that point, the default program for any .RPT file will be the 11.5 product, so, if you need to maintain the 8.5 reports but not upgrade them, you will have to open those files within Crystal 8.5 instead of double-clicking on them from Windows Explorer.

  • Project version(current data and version data comparison not possible)

    HI,
    I am stuck up with project version we are using EHP7 and SAP HANA
    When i create the version through CN71 or CNS41 system displays message "version is saved"
    When i try to compare the same version with the current date in the same mentioned transaction codes system does not display the version data .
    secondly when i am trying to display only version system displays message version does not exists.but in tables data is saved
    In transaction code CN71 if i go to edit -->other selection versions-->enter user and press enter system displays all the saved versions for that project
    selecting the project version it is displayed only
    In the drop down list ,under VIEW--> choose project versions is also in display mode and is not editable .

    hi Sushrut,
    If the version only exists in table VSKOPF then it does not main the version is actually created. You need to check if the corresponding version data has been created in table like VSPROJ_CN, VSPRPS_CN and so on, these tables holds the real data of your versions, if there is no data in these tables, then you can't compare the data also.
    Regards,
    Rachel

  • IMovie, can version 10.0 and version 9.0 coexist

    My MacMini came with iMovie version 10.0, which I dont like
    How can I install iMovie version '09 without removing version 10.0

    Sorry, I misread your post.  I thought you had iMovie version 9.
    iLife '09 came with iMovie '09 which is version 8, not version 9.  I don't know if this should instal in Mavericks. iMovie '11 (version 9) came with iLife '11.  That definitely works for people who had iMovie 9.0.9 in Mountain lion and then upgraded to Mavericks.   The Mavericks instal leaves imovie 9.0.9 in a folder called imovie 9.0.9 in the applications folder.   iLife '11 is available from Amazon .
    Geoff.

  • Adobe Acrobat Pro Version 8.2 and Version 9.X Forms

    If I created a form in Adobe Acrobat Professional 8.2 why can't I open the form to make changes to the field name in version 9.X. The ability to change names for the fields is greyed out.
    Please help!!!

    pwindsor wrote:then it was opened in Adobe Acrobat 8 professional and the fields were given names.
    I guess that's what I'm asking. How was this done? Were the form field tools in Acrobat used or did you use Form>Create new form?
    Using the latter actually uses LiveCycle Designer (it's integrated in to Acrobat). If that's the case, the form fields are no longer editable in Acrobat itself. You need to continue to use LiveCycle Designer.
    Sory if this seems like a silly question but the reason I ask is because many people having this issue have used Designer unknowingly and thought they were using Acrobat (since one is accessed through the other).

  • Exporting Versions sends master and version files

    For some reason when I try to export versions of my photos instead of exporting just the versions aperture sends both the master and the version. Any ideas of how this can be avoided? Do I have something wrong in a preset or preference?

    Do you mean that you are getting the original RAW file as well?
    Ian

  • Input Tax  - difference between sap version 4.7 and version 5

    Hi All
    I done total customising of input tax on sap version 4.7 as well as version 5.
    now I want to enter following invoice through t.code F-43:-
       Raw Material Cost                           50,000.00
    Add:-  Excise                                       8,000.00
    Add:-  E.Cess                                          240.00
    Add:-  Vat                                             2329.60
    So we are to pay to vendor Rs. 60,569.60.
    Now when use sap version 4.7 & run t.code F-43, then if I enter Rs. 60,569.60 against g.l of vendor & purchase, then system accept it.
    But when I use sap version 5 & run t.code F-43, then I have to enter Rs. 60,569.60 against g.l of vendor & Rs. 50,000 against g.l of purchase, then only system accept the entry.
    why so. Plz clarify
    With Regards
    Deepak Garg
    Mob 9213784161

    Hi,
    there are lot of changes like i observe
    1, in rebates there is no advanced rebate processing in 4.7
    2. there is no scale group field in condrecords of agrement in rebate agreement.
    3. there are lot of new reports available in SIS
    4. in sales returns process also seperate config available in 6.0
    regards,
    sk

  • Basic data what is the difference between Version Dependent task and indep

    In basic data settings what is the difference between Version Dependent task and version independent task. please give detailed explanation

    Hope this link gives you the answer.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4b7aa453d11d189430000e829fbbd/frameset.htm
    Best regards,
    Sudhi

  • I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac.  All the music is still available on my ipad.  How can i download the music on my mac?

    I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac.  All the music is still available on my ipad.  How can i download the music on my mac?

    First, are you positive it is really not there?  Have you looked in your iTunes folder in your Music folder, and in the media folders there? Do you see your media files?
    If your media are gone it is a lot easier to restore from a proper computer backup.  Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software.  See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

  • Error in creation of model and version

    Hi experts,
    While I m trying to create Model and Version SAP demo systems, it is showing me error " Live cache is not availble".
    Should I copy a planning version to new or should I contact basis team for that? It is also not allowing me to create new LC connection.
    I am attaching screen shots. Please help.

    Hi All,
    BASIS guy have configured Live Cache. We have started live Cache succesfully.
    Still facing problem in Version stating that an error occured in Live cache.
    Kindly help.
    Attaching screen shot below.

  • I have downloaded the latest pages  update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

    I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

    The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
    If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
    Or contact AppleCare. They made this mess, let them fix it.

  • Tried downloading itunes version 11.4 and received an error code 2324. Now itunes will not work at all and I cannot sync my phone, ipad or ipod. How should I proceed?

    I have tried several times to load version 11.4 and keep getting an error code2324, now I cannot sync any of my apple products. I set my machine to a previous recover date,  now iTunes will not work at all. I get a message stating I do not have the administrator rights to download. Any thoughts on this issue?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • HT3951 I purchased a movie on the AppleTV 2 but it is not showing up in iTunes on my desktop computer. How can I sync? (have lastest version of iTunes and ATV2 software)

    I purchased a movie on the AppleTV 2 but it is not showing up in iTunes on my desktop computer. How can I sync? (have lastest version of iTunes and ATV2 software)

    Of course it always works, what are you talking about.
    I appreciate that re-downloading is only available in the US and then only with certain content. However content that cannot be re-downloaded is not offered for purchase on the Apple TV.

  • The other day I had downloaded the latest version of Firefox and now none of the icons for the different websites I normally go to are there?

    As I said, the other day I had downloaded the latest version of Firefox and after doing so none of the icons for the different websites that normally go to are no longer there. Websites such as MSNBC, MSN, Most visited, that entire strip is no longer visible. I tired resetting Firefox and still nothing. Can anyone tell me how to get them to appear again? It's a hassle every time that I want to go to one of those sites I have to type it in the search bar, instead of just clicking on it as I did before. Please keep in mind if you answer, that I'm still learning about these things called computers and not very well versed in some of the things that you experts know:) Thanks

    On Windows XP Firefox shows the menu bar by default and not the orange Firefox menu button that is shown when the menu bar is hidden.<br />
    The menu bar is the toolbar at the top that shows menu items like File, Edit, View, History, Bookmarks, Tools, Help.<br />
    You can press the F10 key or tap the Alt key to bring up the "Menu Bar" temporarily in case this bar is hidden (View > Toolbars or Firefox > Options).
    The Navigation Toolbar shows the Back and forward button and the input field where you type the address of a site that you want to visit (aka location bar) and also has a search bar where you can type items that you want to look up with a search engine (Google).
    See also:
    *https://support.mozilla.org/kb/how-do-i-get-firefox-button
    *https://support.mozilla.org/kb/Menu+bar+is+missing
    *https://support.mozilla.org/kb/Browsing+basics
    *https://support.mozilla.org/kb/Tabbed+browsing
    You can attach a screenshot in case you still have problems with the toolbars to show what you want to change.
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.

  • I just downloaded the new version of Firefox and now every site I used to use such as Facebook, Twitter, and Youtube show "This Connection Is Untrusted"

    I just downloaded the new version of Firefox and now every site I used to use such as Facebook, Twitter, and Youtube show "This Connection Is Untrusted". Even when I do accept the risks the site no longer looks the way it's looked for years. Twitter doesn't even give me the option to accept the risks at all and shows this error (Error code: sec_error_unknown_issuer). I've tried resetting Firefox, I've checked the time and date, and I've removed and added Firefox to see if that would work. Nothing seems to be working so I can see the sites the way they normally would be instead of "coded". Can anybody help me please?!!! Thanks

    ok, unfortunately the fiddler2.com issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
    <sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
    afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
    [[Troubleshoot Firefox issues caused by malware]]

Maybe you are looking for

  • Logical system value in a BAPI

    i am using a BAPI, its asking for logical system . How do i know that value ?

  • IPlanet- WebLogic Proxy Connection Pools

    In the NSAPI weblogic plugin doco it says that the wlproxy plugin pools connections. How do you control the size of the connection pool. I don't see a min/max paramater. All I see is KeepAlive, ConnectTimeoutSecs and a few other related but nothing r

  • Is it possible to zoom in on a still-photo

    I have placed a photo in the timeline with the correct duration. Now I want to set a slow zooming in on that picture. This is possible in FCP 7 - but can this be done in FCP X as well? Thanks for answer

  • How to set your playback in Premiere Pro CS5.5 with Tascum 144 Audio Interface?

    I have an Audio Interface Tascum 144 and i want Premiere Pro CS5.5 to Play it from my tascum, except my computer speakers how can i change this setting?

  • Mountain lion safari, mountain lion safari

    Have problems to run videos in Youtube in Safari, and Chrome since i made upgrade to Mountain Lion.  A black screen apears and a white circle turning. I tried to erase cookies and history. Then works fine one or two times, ang again same problem.  I