LAN card and USB not detected (KM4M-V)

I just formatted my PC yesterday, installing Win XP SP2. But the intergrated LAN card and USB is not detected in device manager. I tried HELP but cannot solve the problem.
I am a little confused. After formatting and installing Windows, the hardwares who don't have driver will be having a question mark icon in the device manager. But for my computer, no USB or LAN card is written in the device manager. How can that be?
I had checked my BIOS and nothing indicated to change the USB or the LAN card.
Where did i go wrong? I am using a MSI KM4M-V motherboard.
Anyone can help? Thanks.

Quote
because there are too many spywares in my PC
so was your computer seeming to be sluggish as well then?
Is your problem caused by your PSU? post your system details and full specs of your PSU so we can assess further

Similar Messages

Torch 9860 stuck and usb not detected

what can i do? after hang its can be open again...
this device problem or software problem?
led still red while i connect to usb pc

If your phone is not being recognized by BlackBerry Desktop Software, have a look at this article:
www.blackberry.com/btsc/KB10144 .
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
Thoughts?

SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
(My previous installation was a Mavericks upgrade from Lion)
However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
The generic and ambiguous internal error comes when I try to manually identify the peripheral.
Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
(I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
However, when I click on it and then tap OK, it returns internal error.
As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
So:
- Do you know any applications to 100% clean files created by an installer?
- Do you have in mind any solutions that I might have forgotten?
Thanks in advance from an OS X fan!

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

What version of iPhoto?
Can you access the images with Image Capture (in your Applications Folder) ?

HP DV5t 5-in-1 card reader does not detect my SD card

The 5-in-1 card reader slot of my HP dv5t was working fine until yesterday, and reading my Canon SD card perfectly. However, today upon inserting the card, the card reader is not detecting the SD card. The card doesn't even show up in my device manager. My SD card has no issues since it works perfectly fine on other laptops (I even tried it on another dv5t and it worked). My guess is that there is something wrong with the hardware, since the card doesn't get recognized by the reader even when I use it on Ubuntu. Can anyone please suggest any solution?
I tried contacting hp customer care and after an excrutiating wait of 1 hour or so I had to hang up - out of boredom. My laptop is under warranty but I am really pissed off with hp, I think hp laptops have some of the worst hardware. Also, it takes ages until you can speak to a customer care executive. Can someone please help me? If hp were to give me 70-80% of my money back I would happily swap hp for a T61 or even a Dell!
Message Edited by ttotade on 12-06-2008 02:34 PM

I'm having the same exact problem on my dv5z. I even tried downloading and reinstalling the drivers, but it appears to be a hardware issue. I had a similar problem with my wireless card early on and I think it may be a build quality problem. Any suggestions other than dealing with sending the unit in for repair?

I just bought a iTunes card and its not accepting it. It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work. How can I expedite this process?

I just bought a iTunes card and its not accepting it. It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work. How can I expedite this process?

Has it been 24 hours?
I take it this was a gift card. iTunes Store: Invalid, Inactive, or Illegible codes http://support.apple.com/kb/TS1292 - gift cards
I don't know if this provides an alternative means: https://expresslane.apple.com ; select 'iTunes' in the first column; 'iTunes Store' in the second column
If you are really desperate you could buy the app yourself, then request reimbursement.

HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

My itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?

my itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?

No one here can say specifically why. But you need to do what it says, contact iTunes Support. Click the Suppor tab above then the link under the Contact Us area and you'll be take to a page where you'll be guided appropriately.
Regards.

I downloaded itunes 10.5 this morning and its not detecting my iphone

I downloaded itunes 10.5 this morning and its not detecting my iphone, ive never had this problem before, my laptop is detecting my iphone but itunes isnt, what should i do?

same thing happened to me, I have iphone 4 ios5 and on win 7. help!
Finally got it
exit itunes first then
start > search for "services" > apple mobile device (press stop then restart/start)
goodluck!

TS1292 I scratched off some of the numbers/letters on my iTunes card and can not redeem it. What can I do?

I scratched off some of the numbers/letters on my iTunes card and can not read them. How can I get the numbers?

See this support article:
http://support.apple.com/kb/TS1292
If you can't get the card to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Solaris 9 x86 doesn't recognize my lan card and can't get the drivers

Hi guys! I have a problem with my solaris os.. It doesn't recognize my realtek 8029 lan card and this means that i can't download the drivers from the internet.. Anyway i got the drivers using my other installed OS ( slackware linux 9 ) from the www but there's a problem it seems that i cant mount the harddrive where the driverz are..neither linux->mount solaris hd disk nor solaris->mount linux hd disk do the trick..(+ i don't have a floppy drive ) Any ideaz how to transfer the drivers from the hd disk where the linux is installed to the solaris disk..?

I have the same NIC (RTL 8029 chip), and.. the solution 4 you. :) I made this quick guide for me, so I can add netwotk support to my system, very easily. Happy to see that another person needs that info.
Follow these steps:
1. Download the file from the link below, put it at /, and unzip it.
ftp://sun.drydog.com/pub/solaris/nei-i86pc-solaris5.7.zip
2. Run (from command line) the command:
add_drv /kernel/drv/nei; devlinks
3. Create the file /kernel/drv/nei.conf and write
name="nei" parent="isa" reg=1,0xe800,0x1f interrupts=5;
(this is the hardware address for my card, you should find your's).
4. Create the file /etc/hostname.nei0, whick will contain the line
192.168.0.1
(this is the IP addr. I use for my internal network, change that to any other reserved addr. you like, like 10.0.0.1)
5. If you use IPv6, create /etc/hostname6.nei0 ,too, with the same contents as hostname.nei0
192.168.0.1
6. Edit /etc/hosts and add the line:
192.168.0.1 myname.mydomain
7. Edit /etc/inet/hosts and make the file look like this:
127.0.0.1 localhost
192.168.0.1 myname.mydomain loghost
8. Edit /etc/inet/netmasks and put:
192.168.0.1 255.255.255.0
9. Run from command line mode or from a terminal:
/usr/sbin/drvconfig -i nei
10. Run from command line mode or from a terminal:
touch /reconfigure; /usr/sbin/reboot
11. After rebooting, type "ifconfig nei0 plumb" to make sure the device was recognized.
It should show up in the output from typing "prtconf"
Normally, now you can use your RTL8029 card.
I hope I help a little bit mate. :)

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Usb not detected in windows 8.1

Hi,
First of all thank you. I am happy with your customer support. I had a problem with the unresponsive screen in my HP OMNI 10 which has been solved now.
Now i am facing a new problem with the USB. I have tried all the possible methods but i am not able to find a solution.
My USB drive is not detected whereas SD card is detected. I also ran a component test which showed failed.
Please help me out.
Thank You.

Hey @varun_viswanath ,
Welcome back to the HP Forums!
I see your USB is not being detected by your Omni 10 tablet.
Can you tell me which drive you are connecting (make, model, and size please) and which OTG cable you are using for this?
It would also help to know which Omni 10 tablet you have. You can see here for how to find the model: Locating the HP Omni 10 Tablet model number.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

ES1-111M-C529 Windows 10 upgrade - SD card and touchpad not installed

Hello People ! I upgraded my Acer to windows 10 Home edition 64 bit. Created the USB install from Microsoft page. Choosed the upgrade way. Win 10 installed : - video driver - wireless driver- bluetooth driver- network driver - sound - webcam Windows 10 did NOT detect :- SD card - touchpad I donwloaded ALL the drivers from acer for the model and win10 from official Acer page. After I installed ALL the Acer provided drivers / except for bluetooth / wireless - i still cannot see :- SD card- touchpad Anyone with sugestions ? Please provide some real usefull sugestions and not spam / copy paste things and so on if possible Thanks ! Bogdan Attached screenshot of the actual Device Manager : The SDA standard ... with ! says is waiting for some other device to start.

I solved the problem : I started looking for drivers in all the ES1-x11 family and compared the versions. For Intel IO Drivers : ES1-111M page : IO DriversIntelSerial IO Driver604.10135.1001.530012.9 MB2015/07/27File name : IO Drivers_Intel_604.10135.1001.53001_W10x64_ASize on disk : 2.91 MB (3,053,605 bytes) ES1-311 page : IO DriversIntelSerial IO Driver604.10135.1001.530013.0 MB2015/07/21File name: IO Drivers_Intel_604.10135.1001.53001_W10x64_ASize on disk : 3.01 MB (3,163,333 bytes) Supplementary the SD card reader only exist on ES1-311 page because of reasons .... CardReaderRealtekCard Reader Driver6.3.9600.212759.0 MB2015/07/21 Actually there are 2 files with the same name and version but with different sizes and different published date. I installed 1st the Card Reader - not sure if it was necessary or not and then i discovered that the IO drivers are different version and I installed ES1-311 version . The ES1-311 ( bigger size / published on 2015.07.21 ) worked perfectly on ES1-111M and now i have SD card and touchpad. So for future, dear users please start and search whole Acer Drivers site because they probably are not paid for this or dunno what reasons they can have to perform less profesionally than a 10 yo kid. Have a nice day all ! B.

IPod 5th Gen constantly resets and is not detected

My iPod 5th Gen erased all my music and constantly resets when plugged in. I've searched far and wide through support to no avail so I look to the community to aid my quest to load music to my iPod again. Thanks in advance for the help!
Situation:
- music and all data erased suddenly and is currently in factory settings
- when iPod is plugged in to computer, the iPod screen shows (in order):
     ° "connected, eject before disconnecting" (~5 seconds)
     ° off screen, completely blank (~1 second)
     ° apple logo appears as if restored (~5 seconds)
     ° repeat perpetually
Attempted Remedies and Scenarios:
- restore iPod via select / menu buttons
- try running Disc Mode via select / play buttons
- restore iPod via iTunes (cannot attempt because it is not detected under devices)
- reformat and erase all data in iPod via iTunes (cannot attempt because it is not detected under devices)
- reformat iPod via Disk Utility (iPod is not detected on Mac so cannot select)
- attempted all of the above with the following variables:
     ° with pc running Windows 7, iTunes current
     ° with Mac mini running Mavericks, iTunes current
     ° with Macbook Air running Mavericks, iTunes current
     ° tried all USB ports on all above computers
     ° tried 2 separate 30-pin USB cables (both USB cables work with my iPhone 4s)
     ° iPod is fully charged
     ° restart all computers

Hi everyone.. just found the solution... conveniently after I start a thread. Turns out that my iPod nano had converted all 7.3GB of my 8GB into "Other" space and reset all my settings.
Solution is as follows:
- run disc mode while plugged-in (running Macbook Air)
- restore dialog box appears via iTunes while in disc mode
- restore iPod nano
- upload music
- enjoy

LAN card and USB not detected (KM4M-V)

Similar Messages

Maybe you are looking for