Language Setting for Print Shopping Cart

Hi experts!
Does anybody of you know how to customize the printing of Shopping Cart as well as where to define the relevant language. Language DE should use Form DE, Language EN should use Form EN.
Many thanks for your support.
Best Regards,
Corinne

Hi,
Try using the BADi "BBP_OUTPUT_CHANGE_SF" and acc set the parameters for the smartform icluding the Language.
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

Print Shopping Cart

Hi,
Can someone please tell me which function is responsible for Printing Shopping Cart.
Additional I also would like know if there is a smart forms sap formular. How is the pdf document
creating ?
Kind Regards
Marco M.

I would suggest that you first find out which smartform is used to print out your SC. To do this,
1. first check if the BADI BBP_OUTPUT_CHANGE_SF and see if you have active implementation of it. If so, check the logic of "CHANGE_FORMS". You can set a breakpoint in the form and run "print preview" of your shopping cart again.
2. If there is no active implementation for that BADI, run transaction SMARTFORMS, enter form name "BBP_SC" and click execute. You would be directed to the generated FM. Display the source code of the FM, look for form "global_init" and set a break point there. If this is the smart form the process is using, the "print preview" should stop there.
After identifying your smartform, you need to use transaction SMARTFORMS to have a detail view of the element of interest, e.g. accouting line, and how that value is populated. Generally speaking, SAP is not responsible for pre-delivered smart forms, as in nearly all cases, the customer needs to customize the form based on their own needs. The standard forms serve as templates to get the customer started.

Purchase requistion number not been generated for material shopping carts

Dear Experts,
I am able to create a purchase requistion for text shopping carts once it is approved. For material if i create a shopping cart then status is showing approved(activated workflow without approval) but purchase requistion number not been generated.
It was happening suddenly...earlier i was able to generate PR for material shopping carts.
Please advise on this
Thanks
Ravo

Hi Venkatesh,
Can you please give me the detail requirement. If you want generate a PR for catalogue items then you have to maintain the setting in SPRO_>srm->SRM SERVER->cross application basic settings-> define objects in backend systems...
Thanks
Ravi

GR Based IV Flag for Limit Shopping carts.

Hello,
We are on ECS SRM 3.0,EBP 4.0.There is a requirement to populate GR based Invoice verification flag (GR Based IV flag) for a PO for any Limit shopping carts raised.For all other shopping carts this flag should not be set.One option we can think is a condition set in the Badi which replicates the PO to backend.Are there any settings to achieve the same.
Thanks
Rakesh.

Hi Rakesh,
As Dave said the simple way is using BADI BBP_CREATE_BE_PO_NEW.
There is a way to achive this for Limit shopping carts. Choose 'Confirmation and Invoice' as Follow-on doc in the Limit shopping cart, this will create PO with GR flag active always. But this will not solve your other requirement that all non Limit orders should create PO with no GR flag. In that case you need to use BADI again.
It is up to you, think and decide which way is better..:)
Thanks,
Jagadish

Print Shopping Cart Approvals

Hi,
Currently our print shopping cart function only prints the main details of the shopping cart (vendor, lines, cost center, GL, etc.). How can I include the Approvals and Notes for Approvals to be printed as well?
Thanks,
Gabe

Hi,
There are 2 ways to include the data for internal note/approval notes in SC smartform.
1.You can modify the std smartform BBP_SC used for Shopping Cart in trasnsaction SMARTFORMS .
The smartform BBP_SC is hard-coded in include LBBP_SC_APPF54.
2. If you need to use custom form,try to implement the badi BBP_CHANGE_SF_SC.
See these related threads:
Re: Custom Shopping Cart Smartform..
How to change default smartform triggered while printing for shopping cart
BR,
Disha.

Purchaser wants to print Shopping Cart Output

We have a requirement where in a Purchaser wants to print Shopping Cart. Currently only in Shopping Cart status, a shopper can print this using the print icon. How can get this icon for a purchaser who can print this document? Is there a way I can add the Print icon in Sourcing area or other areas within Strategic Purchaser role?

Hi Anita,
Which SRM version are you working??If on SRM 5.0 or lower ,see this related thread.It discusses about including the print option in transaction "MONITOR SHOPPING CART".You can try something similar with SOURCING or any other transaction in your case.
Re: Can you print shopping cart from BBP_MON_SC?
HTH.
BR,
Deepti.

Purchase Order not created for a Shopping Cart

We have a few Shopping Carts created in SRM which did not transmit as PO to our backend R/3 system. This happened because our R/3 system went down for a couple of hours and the Shopping Carts were created during this time. We tried to submit these Shopping Carts through the Application monitor later and the SRM system gave a message "Processed Successfully". However, POs for these Shopping Carts were not created and the Shopping Carts have a status of "Item in transfer process".
The Shopping Carts have already got a PO number assigned to them through the SRM system. However these PO's have not been created in the backend R/3 system
We are struggling to find the failed RFC calls with the help of BASIS so that we can possibly reprocess them. Alternatively we are also looking for a way to retrigger the PO creation for these Shopping Carts.
I need ideas to resolve this issue.
Many thanks in advance.
Susmit

Not sure if you received an answer or not, but this is what we have had to do in the past:
1. Run BBP_PD for the shopping cart to see what the purchase requisition number will be on the backend system. The requisition number will still be provided even if it fails to transfer to the backend.
2. Run FM BBP_PD_SC_RESUBMIT. The object key field will be the requisition number; the object ID field will be the shopping cart number.
Hope this helps.
Monique Stephens

Work flow not created for the Shopping Cart

Hi one of the customers created a shopping cart,in approval overview it is showing as no need of approvals,but the status of approval is 'awaiting approval', but workflow is not created for the Shopping cart. advised to re-order in change mode but still no use. please advise.

Hi,
what do you see in SLG1? Check the below t.codes
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Saravanan

The general language setting for my Ipad is simplified Chinese, but my appstore is all in korean

the language setting for my ipad is simplified chinese, but the appstore are all in korean, what's wrong with my ipad 2? and how can I fix it?

Sounds like your Apps Store is set to the wrong country for the AppleID you are using on your iPad. You need to go to the Apps Store on your Computer, and then scroll down to the very bottom of the screen. There you will see a little flag button. Click on it, and select the flag for the correct country. That should fix your issue.
Hope this helps!
Cheers,
GB

How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

Hi All,
I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
Thank you Very much.
Regards,
Ramesh J.

Hi,
Refer the below wiki link it may help you.
Product catlog configuration for ECC - CRM - SCN Wiki

Indexing product data for embedded search for my shopping cart fiori app

Hello Experts
I'm doing indexing of product data records for SRM embedded search for My Shopping Cart Fiori app.
however the job being created by the system to accomplish the task is, as error message displayed, not defined properly.
any idea how to resolve this?
i have no idea what program is this, and job details cannot be displayed/changed because of incomplete job definition.
Appreciate any assistance pls.

Hi Dex,
Please check if there was a dump recorded in ST22. Also perform an authorization check SU53 for the background user that submits the job.
Thanks,
Vipin

Shopping Cart Approvers for changed shopping carts

Hi
We're currently working on a patching process and are having problems with shopping cart approvals
We have a 2 stage approval for carts over £75K
The scenario that is not working is
The approver 1, approves the cart
Then approver 2 rejects the cart
The shopper then changes the cart by increasing the value
The workflow should resend the cart back to approver 1 but it sends the cart to approver 2
What changes need to be done to send the cart back to the original approver ?

For for n-Level Approval Shopping Cart sub workflow( 14000134 ) the workitem status is set in the container element APPROVE_OR_REJECT when Sc is rejected it is set other than Zero and when is approved it is set to ZERO check in the workflow log whether this conatiner element is getting populated or not.

Deletion Shoping cart by Requester for soco shopping carts.

hello All
Hi all
please share your thoughts and SAP standard and best practices followed to delete the shopping cart
Classic:-
scenario 1:- no problem
SC created with fixed source of supply and PO created and no confirmation done.
REQUESTER could delete shopping cart at item level since REQUESTER does not require the material.
now item status turned immediately DELETED. no issues. PO set to DELETED in ECC
scenario 2:- problemSC created and without source of supply and BUYER assigned a vendor and PO created and no confirmation done.
REQUESTER could delete shopping cart at item level since REQUESTER does not require the material.
now item status turned immediately ITEM IN DELETION PROCESS rather than DELETED. Here it is a issue.
i expect the system should show deletion immediately at shopping cart at item level. PO set to be deleted (PO also not set to deleted).
if BUYER manually deletes the PO in ECC,Shopping cart again venture to cockpit and again BUYER action is required to complete this request.
what is the best solution for scenario 2 and why the shopping cart status not set to DELETED (ITEM IN DELETION PROCESS I1114 ) when requester DELETES the cart.is it a system bug. every customer expects the system should show right status .
Muthu

Hi Muthu,
I think if a follow-on document created for a SC the best practice is to edit the leading document rather than changing the SC..
Itu2019s better to change the PO in SRM..
Thanks!!
Bharath

Printing Shopping Cart Items

Hi, I'm working an app that contains a shopping cart feature.
I would like to allow the users to print the items of the shopping
cart in an organized format. Maybe they print the cart view or
maybe the itemson how to print the cart could be transfered to a
Datgrid format for printing, whatever. I'm just looking for some
guidance on the best way to allow the user to print. Please provide
an example or a link to an example.
TP

Hi Gordan,
I am facing exactly the same issue but for a different workflow (WS10000276 - Value limit single).
Were you able to find a solution for this issue? Please let me know the solution.
Regards
Srivatsan

Where did all the setting for printing go in PSE8-Mac?!

OK, I'm probably missing some obvious settings somewhere, please tell me after you read my rantings...
I'm using the 'Full Edit' mode, assuming that is important. But the new Print Dialog looks like it has been dumbed down for some one, not sure who, however has it has me completely confused. There are now only three 'steps' for printing. One and two are self explanatory. However...
Step three concerns paper size, image size and several other details. Just for testing, I created a new 4 x 6 inch, 300dpi page and drew some lines. Command-P. Proper printer is selected, select "Letter" as the paper size. 4 x 6 inch appears selected as the "Print size" (I thought that was because of the original page size, but it appears to simply be the default). That is a detail that could easily be over looked by a new user. If the original image is larger than 4 x 6, it will, obviously be either cropped or reduced to fit those dimensions! It seems to me that the "Select Print Size" should automatically assume to be the image size. OTOH, I can see that some people may want to do all their printing on one size of paper. In that case, why not have a preference for the default and let the user change it when they change paper sizes (if they want)?
Now, if the user happens to notice that a new 8 x 10 inch image is going to be printed in a 4 x 6 area, she will now decide to check the other settings available in the pop up menu. OK, there IS an 8 x 10 inch choice. But look, what's this "Custom" choice? Let's investigate...Now this is strange! The defaults there seem to be 1.383 inches for height AND width! Who came up with that weird number?!
Oh, there is a "Scale to Fit Media" check box. Checking that now makes the height and width somewhat closer to reality, they now indicate the pape dimensions. That IS logical, but not extremely helpful, IMHO. By the way, the second time one selects the "Custom" choice, the correct, original image size appeared in the Print size boxes. Although I cannot seem to get those to reappear. Oh well...
My point is, how do these confusing configurations help? Beyond me, anyway.
BTW, the dpi settings all seem to be 'computed' at one less than the number set by the user for an image. For example, a new image page created at 300 dpi shows 299 in the Custom dialog, 150 shows 149, etc. Close, but why not exact? Furthermore, why can't the user select any dpi they choose? Isn't that what the computer if for; calculate what happens to the pixels when they print at a different setting than the image? Sure, the user should be warned that terrible images my result, but if that's what the user wants, let it be done! Who's running this show, anyway? Oh yeah, I remember, now...excuse me for asking, I'm only a paying customer, what do I know?!
Lastly, if one has more than one image open, every single one can easily be printed, accidentally. Why? Because they will all appear in the Print Dialog. Don't you see them? Over there on the left. Yeah, I see them, but why doesn't the image I have in front, the one I'm working on, be the one I probably want to print? Many of the others may simply be images I'm borrowing parts from. Why do the developers think I always want to print every image that might be open? I don't have any idea, either. Sure, there are a couple of ways to prevent this multiple image printing; select the one you don't want to print and use the "minus" button or simply close all those images before going to the Print dialog. Guess what. Using the 'minus' button only works for this printing, the next time you ask to print they will all be there, again. And, what if you aren't really finished using some of those extra images that you closed? Now you get to re-open them all again. Completely unnecessary steps because of poor user considerations/research, in my humble opinion. Again, this is exactly the thing that preferences are made for. Or, put them in the "Edit Guided" mode! Or, better yet, just give me back the old Print dialog! Nice!
Now, I am extremely glad to see that PSE can now remember to keep that stupid Panel bin out of the way! Finally! Three more inches of screen to work with!!! Hooray!! Unfortunately, it still can't remember what the last setting for the jpeg quality was...still defaults to ZERO! Sure, that's the setting I always want to use, it's so much fun letting people try to guess what is in the image...one would think after 8 iterations this could be fixed. One down, umpteen to go. Oh well, what do you want for $80?

Thanks for your listening/reading and I'll take your advice about dropping a note to the developers, but I won't be holding by breath! I doubt that they consider this a real problem. It's really just my ranting!
Your solution is probably the 'fix' they might suggest, anyway. However, I'd rather have the screen space than a list of thumbnails of images I already have open. command-plus and/or minus is a pretty quick way of making it easy to see anything that might be visible. Of course, I'm sure there are other uses for the Project Bin that many find useful. Even though I have a 24" iMac, I rather like using the screen space the way I want, not an arbitrary way that got developed. I just don't see why developers can't program an app to allow every conceivable method of use by every living and future user! LOL!!!
I guess today was the first time I've printed anything since installing 8. I was, quite confused when presented with the new Print interface. Actually, I thought that must be part of the 'Guided' set up which I assume leads one by the hand as much as possible. "Thank you Adobe, but I'm trying to avoid unnecessary contact with strangers right now." LOL! At least I know I didn't miss some setting somewhere.
Thanks! Have a great weekend! And don't get scared too much tonight!

Language Setting for Print Shopping Cart

Similar Messages

Maybe you are looking for