Large Schema file registered and using folders to load the data (WebDAV)

I have a very large schema file that I have registered using binary (Schema file > 30000 lines).
My data has been in MarkLogic and it is organized in a folder structure providing reuse of pieces of the xml.
It seemed the most logical way to load the data was to create the folder structure in XDB and move the files via WebDAV. We also have extensive XQueries written.
My question is how do I query the data back our when it is loaded this way. I have read and experimented with resource_view but that is not going to get me what I need. I would like to make use of my xqueries that I have.
Can i do this, and if so, HOW??

Sure. Let me lay out a with some more specific information.
My schema has an overall root level of "Machine Makeup".
All of these items are defined under it with a lot of element reuse and tons of attribute groups that are used throughout the xml schema. I can do a lot of things but what I cannot do is change the structure of the schema.
The data is currently in a "folder structure" that more closely resembles the following. I have tried to annotate number of files and keep in mind all of these are working documents and additional "record" (xml files) can be added.
Composite - contains 12 folders and each of these folders contain xml documents
compfolder 1
- compfolder 12
Most of these folders contain < 200 .xml files (each with id.xml) as the name of the file however one of these directories currently contains 1546 files. They all belong... no real way to split them up further.
At the same level as composite
About half of these folders at this level contain > 1000 but less than 3000.
Like
PartsUse > 1000 but less than 3000
transfer of parts 8000 and can continue to grow
people > 3000 and these would be used in the transfer of parts like "who sold it" Everytime someone new a new one is added etc.
There are about 12 folders at this level.
Now, the way the system works is a new person that is not in our list is involved the users get a "new" empty xml document to fill in and we assign it an id and place it in the folder.
So it would something like this
Composite
folder1 - 1000 xml file
folder 2 - 200 xml files
folder 12 - < 2000
Locations
contains < 2000 xml files
Activities < 3000 xml files
PartsTransfer 8000 xml files and growing
materials < 1000 xml files
setup < 1000 xml files
people 3000 xml files and growing
groupUse < 1000
and so forth.
All of the folders contain the links I had previously layed out
So Activities would have materialLink id = "333" peopleLink ="666"
And so of and so forth.
So because my file numbers are > than the optimum about half the time, how would I have 3 separate xmltype tables (I understand mine would be more than 3...)the one schema file that is intertwined with others. Can you show me an example. Would I annotate it in the schema at just those levels. This schema file is so huge I would not want to have to annotate all elements with a table. Can I pick and choose to mimic the folder structure?
THANKS SO MUCH for your help. I really want to show that Oracle is the way. I can implement it with a simpler structure but not the size of complexity that I need. I haven't been able to find a lot of examples with the new binary registration.
Edited by: ferrarapayne on Nov 16, 2011 1:00 PM

Similar Messages

Finding File Name And Using It To Place The Graphic Using VBscript

I'm trying to find a file name (example, <place:E:\logo.tif>) in each text frame if it's there, then remove the text from the frame and then place the file in the frame. This is to get around the feature missing from InDesign that is in PageMaker that allowed you to import inline graphics using tagged text. Below is what I have come up with so far. The file name is currently hard coded in the example below.
Thanks,
Archie
For I = 1 to cInt(myMountNumber)
Set myTextFrames = myDocument.TextFrames
Set myCurrentFrame = myTextFrames.Item(I)
If myCurrentFrame.Texts.ItemByRange (1,7).Contents = "<Place:" Then
Set myLastCharacter = myCurrentFrame.Characters.Item(-2)
myCurrentFrame.Texts.ItemByRange (1,myLastCharacter).Item(1).Contents = ""
myCurrentFrame.InsertionPoints.Item(1).Place ("E:\sxs\pm65\Sundco.jpg")
myCurrentFrame.Fit idFitOptions.idProportionally
End If
Next

' For I = 1 to cInt(myMountNumber) For I = 1 to myDoc.TextFrames.Counts ' I think your myMountNumber is equal to TextFramesCount ' Set myTextFrames = myDocument.TextFrames ' Set myCurrentFrame = myTextFrames.Item(I) ' you don't need to get reference to ALL TextFrames in EACH iteration Set myCurrentFrame = myDocument.TextFrames.Item(I) ' get reference to Ith TextFrame in document ' If myCurrentFrame.Texts.ItemByRange (1,7).Contents = "<Place:" Then If left(myCurrentFrame.Texts.Item(1).Contents,7) = "<Place:" Then ' looks better and should be faster ' Set myLastCharacter = myCurrentFrame.Characters.Item(-2) ' myCurrentFrame.Texts.ItemByRange (1,myLastCharacter).Item(1).Contents = "" ' you don't need these lines - you will delete contents in PLACE line ' myCurrentFrame.InsertionPoints.Item(1).Place ("E:\sxs\pm65\Sundco.jpg") myFile = Mid(myCurrentFrame.Texts.Item(1),8) ' get all after "<Place:" myFile = Split(myFile,">")(0) ' get all to ">" ' small trick ;) when split - get array - but we can use (0) to refere to first element myCurrentFrame.Texts.Item(1).Place(myFile) myCurrentFrame.Fit idFitOptions.idProportionally End If Next and I don't think that iterating TextFrames collection is good way ... you should iterate Stories collection and refer to first TextFrame - unles you are sure what you are doing ;) and you have Stories where each TextFrame will have image inside ... robin -- www.adobescripts.com

Connecting Pumps to PC and Using LabView to collect the data

Hi There,
I am a beginner with LabView and I want to use LabView to collect data from a Pump using RS-232.
Could anybody help me where I need to start from?
I highly appreciate your help.
Regards
Mo

Hello moizadi,
the best place to start is definitely the excellent Example Finder built in LabVIEW (Help menu -> Find Examples...). Switch to the Search tab and enter the keyword RS-232. This way you will find nicely documented examples for other common tasks as well. You will find further tutorials and more specific examples by searching for RS-232 or serial communication keywords on NI.com search.
If you have further questions, please feel free to ask!
Daniel

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

Problem with sending large HTML files as attachment using JavaMail 1.2

Hi dear fellows, i am currently working on posting Emails with attachments using JavaMail 1.2. i succeeded in sending many mimetypes of files as attachments except for .htm and .html files. when large HTML files (say, >100 kB) serve as attachements, the mail is posted on mail server, but not properly posted since only the first small part of the file is writted into mail server but the latter part of the attachment file is missing.
is that a bug of JavaMail??? are there any fellows encountering similar problem as i did??? any suggestions for me to proceed? hopefully i made myself clear...
Many thanks in advance,
Fatty

i've sort of found the cause for that, it is because when the stream write to the mail server, unfortunately there is a "." in a single line. so the server refuse to take any more inputs.
so do i have to remove all the "." in the file manually to avoid this disaster? any suggestions??
Fatty

How do the User and Shared Folders relate to the main drive? Can we delete?

I'm curious how the User and Shared folders relate to the main hard drive and if there is duplicate files in these folders and the main hard drive. Some software programs I have seemed to have loaded content/info into these folders and I'm wondering why they put files in there instead of just the regular main hard drive pathing. These 2 folders are more confusing than anything. I can see that might be of use to a family and each family member wants to keep files in a personal file, but when I'm the only one using my computer, it seems like I should have the option to remove these folders completely, but I don't because I feel like I would be deleting some important files that I wasn't aware were in these folders.
Another thing is, when I click on User folders (at least I think it's the User and not Shared folder), it brings up my name and 'Shared' in 2 seperate subfolders. Is anything in these folders duplicates of what's on my main hard drive? Is there anything significant about these folders if I'm the only user on my computer?
I would nice to get rid of clutter and to eliminate options for software to install things by deleting these folders and not have home/user/shared folders. Is that possible?

stikygum wrote:
Yeah, I'm really low on space, so I'm going about a bunch of different consolidating options. But I mainly posted my main question to help me understand what 'stuff' is in the User and Shared folders and whether or not they act like an Alias, in order to help me make an informed decision what is best for my needs.
They are not aliases; it is a hierarchy, and there is intentional duplication at different levels. This is a feature.
First thing is that Users and Shared are at different levels. Users is at the top level, but Shared is one level inside Users, at the same level as any other user account you have created.
Therefore, if you delete the Users folder, you delete all user accounts, which means you delete all personal data. OS X probably won't even let you delete the Users folder unless you start up from a different hard drive, because you can't delete your user account while you are running in it.
Now, more about the hierarchy. The intentional duplication is so that documents and software can exist for individual users or all users. For example, there are multiple Applications folders:
Hard Drive\Applications - applications any user can see, installed at the system level
Hard Drive\Users\username1\Applications = applications only that user can see
Hard Drive\Users\username2\Applications = applications only that user can see
In the same way, there are multiple Preferences, Cookies, Application Support, etc. folders at different levels, for the same reasons.
If you do not know what you are doing and you delete one of these folders that "looks like a duplicate" you could cripple some essential part of your system or your account. That is why people are telling you not to do this.
The Shared folder is there because if you are in one user account you are prevented from seeing the files inside other user accounts. (Because you don't want other accounts to be able to see your personal data.) If you want to share files with others in your house using the same Mac, that's a problem. But the Shared folder solves this. if you want some files to be accessible to all users, like some photos or music, just put them in the Shared folder and now anyone with an account on that computer can see those shared files.
The reason shared files are not simply stored at the top level is because everything above the Users folder is supposed to be reserved for the system. User-specific are supposed to stay in the Users folder. That is why they put the Shared folder in there.
If you are not using the Shared folder and are just eyeing it because you want to free up some disk space, well, it probably won't help to delete it. Because if you are not using the Shared folder, it is probably not taking up much space, even though you see stuff in there. And if there is stuff in there taking up space, first figure out if someone put it there for a reason before you delete it.

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

How to write a procedure to load the data into a table using xml file as input to the procedure?

Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.

here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3 insert into MyXmlTable
4 select *
5 from xmltable('//Entity' passing xmltype(x) columns "dcode"
6 varchar2(4000) path '/Entity/dcode',
7 "ddesc" varchar2(4000) path '/Entity/ddesc',
8 "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9 commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
SQL>
Ramin Hashimzade

Loading the data from a text file to a table using pl/sql

Hi Experts,
I want to load the data from a text (sample1.txt) file to a table using pl/sql
I have used the below pl/sql code
declare
f utl_file.file_type;
s varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
loop
utl_file.get_line(f,s);
insert into sampletable (a,b,c) values (s,s,s);
c := c + 1;
end loop;
exception
when NO_DATA_FOUND then
utl_file.fclose(f);
dbms_output.put_line('No. of rows inserted : ' || c);
end;
and my sample1.txt file looks like
1
2
3
The data is getting inserted, with below manner
select * from sampletable;
A     B     C
1     1     1
2     2     2
3     3     3
I want the data to get inserted as
A     B     C
1     2     3
The text file that I have is having three lines, and each line's first value should go to each column
Please help...
Thanks

declare
f utl_file.file_type;
s1 varchar2(200);
s2 varchar2(200);
s3 varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
utl_file.get_line(f,s1);
utl_file.get_line(f,s2);
utl_file.get_line(f,s3);
insert into sampletable (a,b,c) values (s1,s2,s3);
c := c + 1;
utl_file.fclose(f);
exception
when NO_DATA_FOUND then
if utl_file.is_open(f) then utl_file.fclose(f); ens if;
dbms_output.put_line('No. of rows inserted : ' || c);
end;SY.

Use LINQ to extract the data from a file...

Hi,
I have created a Subprocedure CreateEventList
which populates an EventsComboBox
with a current day's events (if any).
I need to store the events in a generic List communityEvents
which is a collection of
communityEvent
objects. This List needs to be created and assigned to the instance variable
communityEvents.
This method should call helper method ExtractData
which will use LINQ to extract the data from my file.
The specified day is the date selected on the calendar control. This method will be called from the CreateEventList.
This method should clear all data from List communityEvents.
A LINQ
query that creates CommunityEvent
objects should select the events scheduled for selected
day from the file. The selected events should be added to List
communityEvents.
See code below.
Thanks,
public class CommunityEvent
private int day;
public int Day
get
return day;
set
day = value;
private string time;
public string Time
get
return time;
set
time = value;
private decimal price;
public decimal Price
get
return price;
set
price = value;
private string name;
public string Name
get
return name;
set
name = value;
private string description;
public string Description
get
return description;
set
description = value;
private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
if (eventComboBox.SelectedIndex == 0)
descriptionTextBox.Text = "2.30PM. Price 12.50. Take part in creating various types of Arts & Crafts at this fair.";
if (eventComboBox.SelectedIndex == 1)
descriptionTextBox.Text = "4.30PM. Price 00.00. Take part in cleaning the local Park.";
if (eventComboBox.SelectedIndex == 2)
descriptionTextBox.Text = "1.30PM. Price 10.00. Take part in selling goods.";
if (eventComboBox.SelectedIndex == 3)
descriptionTextBox.Text = "12.30PM. Price 10.00. Take part in a game of rounders in the local Park.";
if (eventComboBox.SelectedIndex == 4)
descriptionTextBox.Text = "11.30PM. Price 15.00. Take part in an Egg & Spoon Race in the local Park";
if (eventComboBox.SelectedIndex == 5)
descriptionTextBox.Text = "No Events today.";

Any help here would be great.
Look, you have to make the file a XML file type -- Somefilename.xml.
http://www.xmlfiles.com/xml/xml_intro.asp
You can use NotePad XML to make the XML and save the text file.
http://support.microsoft.com/kb/296560
Or you can just use Notepad (standard), if you know the basics of how to create XML, which is just text data that can created and saved in a text file, which, represents data.
http://www.codeproject.com/Tips/522456/Reading-XML-using-LINQ
You can do a (select new CommunityEvent) just like the example is doing a
select new FileToWatch and load the XML data into the CommunityEvent properties.
So you need to learn how to make a manual XML textfile with XML data in it, and you need to learn how to use LINQ to read the XML. Linq is not going to work against some flat text file you created. There are plenty of examples out on Bing and Google
on how to use Linq-2-XML.
http://en.wikipedia.org/wiki/Language_Integrated_Query
<copied>
LINQ extends the language by the addition of query
expressions, which are akin to
SQL statements, and can be used to conveniently extract and process data from
arrays, enumerable
classes, XML documents,
relational databases, and third-party data sources. Other uses, which utilize query expressions as a general framework for readably composing arbitrary computations, include the construction of event handlers[2]
or
monadic parsers.[3]
<end>

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

Stage tab delimited CSV file and load the data into a different table

Hi,
I pretty new to writing PL/SQL packages.
We are using Application express for our development. We get CSV files which is stored as a BLOB content in a table. I need to write a trigger that would get executed once the user the uploads the file and parse thru the Blob content and upload or stage the data in a different table.
I would like to see if there is any tutorial or article that could explain the above process with the example or sample code to do the same. Any help in this regard will be highly appreciated.

Hi,
This is slightly unusual but at the same time easy to solve. You can read through a blob using the dbms_lob package, which is one of the Oracle supplied packages. This is presumably the bit you are missing, as once you know how you read a lob the rest is programming 101.
Alternatively, you could write the lob out to a file on the server using another built in package called utl_file. This file can be parsed using an appropriately defined external table. External tables are the easiest way of reading data from flat files, including csv.
I say unusual because why are you loading a csv file into a blob? A clob is almost understandable but if you can load into a column in a table why not skip this bit and just load the data as it comes in straight into the right table?
All of what I have described is documented functionality, assuming you are on 9i or greater. But you didn't provide a version so I can't provide a link to the documentation ;)
HTH
Chris

Saving large tiff files we see a lot of times the lines in the saved file that have either missing ( white) pixels or they appear as a black line across entire file or portion of it

saving large tiff files we see a lot of times the lines in the saved file that have either missing ( white) pixels or they appear as a black line across entire file or portion of it

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why is "Photos" so awful? iPhoto was simple, intuitive, easy to organize and use. Photos is the opposite of that.

Why is "Photos" so awful? iPhoto was simple, intuitive, easy to organize and use. Photos is the opposite of that.

pjonesCET1 wrote:
You can't once installed you can't use iPhoto, anymore in fact I think it is physically removed when you install the 10.10.3 Update.
Incorrect. iPhotos is not removed at all. It can still be used as long as you have kept your Software up to date. Otherwise
Is Iphoto gone ? i want it back!
Pete

Large Schema file registered and using folders to load the data (WebDAV)

Similar Messages

Maybe you are looking for