Last purchase order price

Hi All
On which table will I be able to find the last purchase order price for a material
Vishnu

Hello, Vishnu
Table name: EINE (Purchasing Info Record: Purchasing Organization Data)
in the above table you can find the last PO price for that material. And the Conditions (Item) values are stored in the table: KONP (table name for Conditions (Item).
Suggestion: The last PO document (i mean PO, which contains the price of the material in the PO line item) is updated in the Purchase Info record.(this you can see in the Info record display through t.code: ME13)
Reward, if it helps,
Regards,
Srin.K
Edited by: sapsrin on Feb 12, 2008 5:51 AM

Similar Messages

Last purchase order price during miro.

Here is one issue ...
We created one plant and maintain all possible required configs for it.
Al possible transactions are working fine except one.
When i create a Purchse order of say RS10 as its price. I also perform MIGO for it.
Now before bill passing i.e MIRO, i update the price as 20 .
I would like the system to take Rs 20 for Bill passing, but it still take Rs 10 for bill passing
please share some details.

1. If Invoice is done after P.O System pickes the price of P.O. and it is Modifiable.
2. If GR is done after P.O, system will take the price of GR, while doing Invoice.In your case GR has been doen with Rs 10, so IR will only take 10, however you can modify IR. But actual solution will be reverse the GR and do GR again if it is GR based I.V. SO latter u will not find hassel for GR/IR clearing account.
3. If Partial GR/ IR done system adjust to GR /IR account.

Last Purchase Order & GRN Price

HI,
Anybody can tell me, inwhich table can able to find the Last Purchase Order Price and GRN price.
Tks
Mani.

hi
Table is EIPA.- order price history.
Regards,
Vijay

Previous Purchase Order Price

While creating Purchase order, if i need to see the Previous Purchase order Price for the material, From where i have to see?

Hi
Prompt the last Purchase Order Price for the Material
If you want the system to take the price from the last Purchase Order, then do not maintain the conditions in the info record because it has precedence over the last PO. This means that the net price field in the info record should be left blank.
Even though no price was maintained, the info record will still keep track of the Order price history.
To check the Order price history, go into the material info record and click Environment -> Order price history
Regards
Anand

Excluding price of last purchase order from cost estimate

Good morning,
we have the issue described below:
we would like to exclude a price of some purchase orders from valuation in cost estimate in case of valuation is made by price from purchasing info record.
In this case valuation considers price of last purchase order even if there is a valid agreement used.
Our customer would like to have valuation with price of purchasing agreement and not price of the standard purchase order closed, but if agreement is older and during creation of standard PO is setted the "InfoUpdate" flag, system updates the inforecord and in CK11N during cost calculation it uses this price for subcontracting.
We have done some tests...Is there a standard SAP solution to have price of valid purchase agreement?
Many thanks.
Giusy Castiglione
Accenture Outsourcing

Hi,
Your requirement seems to be very unique and hence you need to try out through by selecting the valuation through user exit where we can request the system take the po price from purchase agreement instead of purchase orders. This selection deftly resolve this unique requirement instead of searching for a std solution.
Trust this helps much!
Regards,!
Ashok Singh

Price from last purchase order

Hi Experts,
I have created info record xxx with some values for XX Vendor and XX Material. Then I have created PO with for same material and same vendor combination with different values and then I am creating PO for same material and same vendor combination but I am getting default price from info record values not last from PO Price. My client wants last PO price default at the time of PO creation.
Pease advice me how can I solve this problem.
Thanks in advance,
Chandhu

Hello
You wered create the Info record means , system will have value PB00 in Inforecord. so when you create the PO then system fetch the PB00 value from Inforecord.
The Last purchase order saved in Inforecord, but it will not fetch the last PO value for new PO.
If you want to Last inforecord price in New PO, then do not create Inforecord for material and vendor combination,
Ex: for fresh material and New vendor create PO, then system automaticaly creates the Inforecord in background,( At Purchase org level.) then it save the last PO.
When you try to create New PO for same combination then system will fetch the data from last PO. here in PO you will get PBXX ,instead of PB00.
Regards
Mahesh Naik.

Purchase Order: Price adopition

Hi all,
I need help on the customizing of SAP MM.
Problem: I need to copy the price of the Purchase Requisition on the field price of the Purchase Order
I have seen that in the transaction SPRO in Material Management - Purchasing - Environment Data - Define Default Values for Buyers there is a pop up. If I choose Settings for Default Values there are some tabs.
In the tab Price Adoption I can only copy the price of the last purchase order and not the price of the purchase request related at the order that I'm creating.
How can I copy the price (of any position) of the Purchase Request?
I need this beacause the price of the Purchase Request is the price that is authorized.
Thanks,
Best Regards
Andrea

Hi Andrea,
The price on the PR may or may not be the purchase price. The price on the PR is called the "Valuation Price", which is taken from the Material Master (Accounting View 1).
The price for the PO is taken from the Purchasing Information Record, if Purch Org and/or Plant level prices exists (otherwise, from the last PO price for the material).
To fulfill your need, you will need to maintain the Purchasing Information Record (ME12) for the material and vendor concerned. Here, you will maintain the price that matches the valuation price. Please note that prices can be maintained both at Purch Org level and Plant level (based on your price control settings in IMG).
Let me know if this helped.
Mewan

Last Purchase Order and FI-Document Number of an Vendor

Hi,
i need for an Vendor the last purchase Order and FI-Document Number.
For purchase Order i read EKKO sort this and get the last one.
For FI-Document Number i read BSIK and BSAK sort this and get last one.
Question: is there any faster way (CLASS, FM or TABLE) to get what i need??
Thanks.
Regards, Dieter

HI Dieter,
You can use transaction code ME2L , where you can list of PO issued a particular vendor. List list shows Po no. indecending order. You can double click select the latest PO and through PO history you can get the FI Document no.
I hope this ansers you query.
Regards
Harish

Purchase order price change report

Hello
How to retieve the purchase order price change report ? do we have any standard report for it or any table which gives these data?
kindl

HI
Have you activate version management at your end for PO,i think this will help you to track changes of PO for qty,price etc.
[http://wiki.sdn.sap.com/wiki/display/ERPLO/Version+Management]
Regards
Kailas Ugale

Last purchase order and goods receipt for material

Hello to everyone,
is there any standard report where I can see the last purchase order and goods receipt for a material?
Regards

Hi,
Latest PO you can get from ME2M, by giving input as material and scope of list as best.
Latest GR date can be get from MB51, by giving input as Material and movement type as 101.
Regards,
Prabu

ME23N - Read Last Purchase Order for Display

Hi,
We are upgrading from 4.6C to ECC6 and one of the problems the users have identified is that when displaying the purchase order with transactions ME22N or ME23N the last purchase order that was worked on is not always the one that is displayed.
This is very evident when creating a PO with ME21N and then switching to view it on ME23N - in ECC6 the PO that was created is never the PO that is displayed on ME23N; whereas in 4.6C creating a PO with ME21N and switching to ME23N the PO that was created is ALWAYS the PO that is displayed on ME23N.
It this feature (whatever) no longer available with ECC6? Is it a configuration settings that we haven't properly set in ECC6?
Thanks for any help.
Martha

I analysed how SAP remembers the previous purchase order number in transaction ME23N in version 4.7 as I do not have access to version ECC6. In version 4.7 transaction ME23N reads table ESDUS (MM: Dynamic User Settings) in the following way
ESDUS-UNAME = sy-uname
ESDUS-ACTION = 'MEPO'
ESDUS-ELEMENT = 'Application Po_Process'
The purchase order number is the first 10 characters of ESDUS-ACTIVE (ESDUS-ACTIVE+0(10)).
When you read a new purchase order SAP writes that order number to table ESDUS using function module ES_SAVE_USER_SETTINGS. When you revisit the transaction SAP uses function module ES_READ_USER_SETTINGS to read the purchase order number stored in table ESDUS.
Ask an ABAP programmer to investigate this in your system with the information I have provided you. He/She should be able to find out what is going wrong. I am limited because I do not have access to your system. Hope this helps. Please let me know what the ABAP programmer found out.

Error in the purchase order price.

Hi
Can you show me the standard procedure to correct a price difference between the PO and the invoice for the following cases.
The PO was created in September/2010 with a price of 15.
The GR was conducted in September/2010 with the same price.
The invoice is from November/2010 with a price of 24.
I wanted to cancel the receipt, or the period is closed. On the other hand it handles no price difference account.
How can I fix this?
Thank you for your help

Hi,
Check price control of the material , it must be V, so the system valuates goods receipts with the purchase order price only . And as you have sufficient stock in invoiced quantity, the differences between the order price and the invoice price are debited to the stock account.
If no sufficient stock available in invoiced quantity or quantity is consumed or issued already before invoicing, then the difference between the order price and the invoice price is only posted an u201CExpenses/Revenue from price differencesu201D account
Regards,
Biju K

Purchase requsition and Purchase order Price Changes

Hi All,
When purchase requsition(XXXXXXXX) is converted in to a purchase order through ME 59N(YYYYYYYYYY),after converting in to a purchase order i will change the purchase order price to a new value.
How can i track the price changes for a purchase order that is converted from a purchase requsition.(i know i can see the changes to a PO,under item changes for PO)
Is this data is stored in any table?
with regards,
Amogh

Hi,
this change is not captured, because the price is being changed at the point of the PO creation and so there will be no record in the header or item changes option (the system does not see anything as being changed because this is a creation of a new PO).
The price from the requisition is merely a suggestion and it is not meant to be a purchase price anyway (it is designed to be used to value the requisition for the release strategy).
I know that you can configure the system to pass this req "price" to the PO, but it is not the same price and so you will not find the type of controls that you would expect.
In many cases a simple ABAP is written that reads POs that have a reference requisition and the ABAP compares the prices and reports on those that exceed a tolerance (either hard coded in the program or held on a new table in SAP).
None of this is standard SAP but it is something that many people create to handle the situation where the user enters the requisition at a deliberately low value to get it through the release strategy.
Steve B

Last goods receipt, last goods issue and last purchase order

Hi Experts!!
is there any table/info structure where I have the last goods receipt material document number, last goods issue material document number and last purchase order number? I want to extract this information to Business Warehouse.
Best regards

Are you looking for a report similar to MB51?
If you put little more detail, i might be able to help. I don't know much about info structures but i can tell you the SAP tables.
All Movement Details are in the below tables.
MKPF- Material Document Header,
MSEG - Material Document Detail -( you can put your material, plant for selection)
Last PO - you can get it from Info-record (EINE- EBELN, EINE-EBELP).
Thanks,
Shekhar Ramineni

Purchase Order Price and Invoice verification price

Hi All,
In which report we can get purchase order price and Invoice verification price in SAP standard.
Thank in Advance........
Regards,
Sanjay

Hello,
Check ME80FN transaction and select change view on the output screen and select Purchase order history.
Regards,
Shailesh

Last purchase order price

Similar Messages

Maybe you are looking for