Laundry list of issues

So I bit the bullet a few months ago and subscribed to CC. I haven't been too happy:
4K monitor support. They've been around for a year, and I still have to squint at the tiny icons because your software doesn't scale the UI. Fix this.
Spam in Lightroom, in a program I pay for every month (try LR for Mobile in the top ribbon). Really?
No apparent way to contact support via email, have to call the US or wait in line to get cumbersome chat support. Again, I pay for this every month, and don't expect to need to beg for the community for free help.
And this is what did it for me: I have 32 gigs of memory, and I can't crop a 782MB image in PS just because my scratch disks are full.
I'm sure there are others, but I'm getting sick of this.

Irate wrote:
…But my point was that PS shouldn't need to use scratch disk at all, as I have plenty of memory left and I was editing a rather small file…
ROFL !
You are under one or more severe misconceptions. Happens often if you get "Irate".
Photoshop creates a scratch file the instant you open an image file or create a new, empty document, no matter how much RAM you may have. Always; no exceptions.
It sets and continually increases its size based on its size, which includes pixel dimensions and bit depth, number of layers, history states, etc.
As I wrote above: The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
Your SSD can only be considered barely adequate if it is a dedicated scratch drive for Photoshop alone, with nothing else on it.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I also have 16 GB of RAM installed.

Similar Messages

Laundry list of issues with ARD 3

I am running the client on aprx 200 systems across multiple subnets (our network is arranged with floor by floor subnets). I was having the very same issues with ARD 2 (and 1 for that matter).
Cannot update client from 2.2 to 3 on multiple systems.
the command either stalls at the "preparing to copy" prompt or fails after the copy finished . I have updated about 2/3 of he 2.2 clients but cannot get the last ones to go.
All Computer list does not refreshing properly.
is there a way to force a refresh of the list? the refresh button does nothing.
Cannot generate reports from the version 3 clients.
I have re-installed ARD
cannot set a remote task server.
I put the server in the field and it blanks the field.

"Cannot update client from 2.2 to 3 on multiple systems."
Ensure the clients are running 10.3.9 or later. If not, update them.
"cannot set a remote task server."
Are you using a second copy of RD Admin application? You cannot use an installed copy of ARD with the same serial number as your installation. You must purchase an additional license.

Laundry list of issues with my N9.

I *love* my phone but there are many rough edges. I'm hoping I can fix a few here.
Phone:
1. Does not always wake on double-tap
2. I both love and hate swype keyboard. I hate it because swiping from Q or P swipes out the keyboard. Can this be disabled?
Feed screen:
1. Weather on the feed screen always says "Vienna". I'm no where near any "vienna"
2. Despite showing the right map, on two occasions I've had weather not show me the proper radar.
3. I can't figure out how to retun to my feed screen after launching an item from it. I always have to start at the top?
4. My feed screen only sometimes shows my calendar
Dialer:
1. has trouble matching phone numbers without the +1
2. Why do I have to swipe up to answer o ignore a call, then choose to answer or ignore it? Can't we skip a step?
3. Why are the buttons so small?
Video:
1. I can't play high def video from the Ovi store.
Drive:
1. Has no sound.
Maps:
1. Has no traffic overlay
2. Cannot found local outbakc steak houses by searching on "outback" like in google.

Scorp1us wrote:
I *love* my phone but there are many rough edges. I'm hoping I can fix a few here.
Phone:
1. Does not always wake on double-tap
SOMETIMES THIS HAPPENS TO ME TOO. IT USALLY HAS TO DO WITH ME. MY HANDS ARE COLD, I AM PARTIALLY COVERING THE SENSOR, I TAP TOO QUICKLY, ETC. SEEMS THAT ONCE IT WAS TRIED, I TOOK A SPLIT SECOND AND HAS TO RESET,,,AND PATIENCE IS NOT MY MIDDLE NAME.
2. I both love and hate swype keyboard. I hate it because swiping from Q or P swipes out the keyboard. Can this be disabled?
NOT REALLY. I WOULD LOOK AT WHERE EXACTLY YOU ARE ACTUAULLY STARTING YOUR TOUCH. THERE USED TO BE A DIFFERENT BUG WHEN STARTING WITH THE P BUTTON, BUT THAT WAS FIXED.
Feed screen:
1. Weather on the feed screen always says "Vienna". I'm no where near any "vienna"
DID YOU SET UP YOUR CITIES? THE CITY YOU SELECT LAST SHOULD BVE TTHE CITY YOU SHOW ON THE FEED SCREEN.
I HAVE HAD ISSUES WITH THIS RESETTING ITSELF SINCE I STARTED OVER-CLOCKING, WHERE IT DELETES ALL MY CITIES AND SOMETIMES WHEN I OPENS, IT STARTS LIKE THE FIRST TIME AND SHOWS HELSINKI
2. Despite showing the right map, on two occasions I've had weather not show me the proper radar.
YOURE ON YOUR OWN HERE. I HAVENT NOTICED ANY ERRORS LIKE THIS
3. I can't figure out how to retun to my feed screen after launching an item from it. I always have to start at the top?
I THINK YOU ARE SAYING THAT IF HAVE SCROPLLEDD DOWN AND THEN TAPPED ON A TWEET, IT OPEN TWITTER APP TEN WHEN YOU GO BACK IT STARTS AT THE TOP OF YOUR FEED??? ARE THERE MORE NEW ITEMS WHEN IT GETS THERE, OR THE SAME.
4. My feed screen only sometimes shows my calendar
ARE YOU TALKING ABOUT THE TOP LEFT OR A CALENDAR APP THAT ALLOWS IT TO SHOW YOUR ITEMMS AS THE TOP OF THE FEED?
IF SO, WHICH ONE ARE YOU USING?
Dialer:
1. has trouble matching phone numbers without the +1
MINE SEEMS FINE SO LONG AS THEY ARE INMY CONTACTS WHEN I USES JUST 7-DIGIT NUMBERS IN USA. BUT, IT DOESNT DO THE MATCH UNTIL AFTER I HAVE TAPPED THE CALL BUTTON.
2. Why do I have to swipe up to answer o ignore a call, then choose to answer or ignore it? Can't we skip a step?
YES. IF YOU JUST DONT WANT TO ANSWER, EITHER HOLD YOUR HAND OVER THE LIGHT SENSOR, OR FLIP YOUR DEVICE TO SCREEN-DOWN. THIS WILL IGNORE THE CALL. YOU WILL HAVE TO SWIPE TO ANSWER IT, OR YOU COULD USE EASY ANSWER
AND IT WILL AUTO TAKE THE CALL USING A COMBONATION OF YOU COVERING THE SENSOR AND THE ACCELEROMETER. I USE IT AND IT WORKS FINE.
3. Why are the buttons so small?
WHICH BUTTONS? CALL/END? I FIXED THAT IN MY THEMES. I THOUGHT THEY WERE TOO SMALL TOO.
Video:
1. I can't play high def video from the Ovi store.
SORRY, HAVENT TRIED.
Drive:
1. Has no sound.
I KNOW IFT SOUNDS DUMB....BUT IS YOUR VOLUME DOWN? IF NOT, THEN I WOULD CHECK TO BE SURE THAT YOU HAVE INSTALLED SOME AUDIO VOICES. YOU HAVE TO OPEN MAPS, THEN MENU, THEN SETTINGS, VOICES...MAKE SURE THAT YOU HAVE SOME THERE, IF NOT, DOWNLOAD SOME. THEN MAKE SURE YOU SELECT A VOICE TO BE USED. I HAD THIS ISSUE A WHILE AGO AND THAT WAS WHAT IT WAS....USER ERROR ON MY PART.
Maps:
1. Has no traffic overlay
HAVENT TRIED THIS MYSELF. WILL HAVE TO LOOK AT IT LATER.
2. Cannot found local outbakc steak houses by searching on "outback" like in google.
NO IDEA, SORRY.

My List of Issues

First off, i'd like to say I love my iPod touch and im not bashing it in any way.
So, I got my iPod touch 3rd generation 32gb on May 18th and everything has been going great, until the iOS 4 update came along. My first problem is my iPod freezing when charging. I went into the store and they said close all the aps running in the background, and to reset the ipod to remove any doubts of a RAM issue, which totally clicked in my brain as te issue. Unfortunately, it still does it from time to time. Also, my music app crashes from time to time randomy when I pause a song, come back to it later on, and hit play. And the only issue that I desperatley need to be rid of is my clock/time issue. When I restart my iPod, or whenever it feels the need, it will skip ahead three hours, which freaks me out everytime I wake up. It also conflicts with my Facebook app saying everything was three hours ago. Ive tried everything I can think of, editing the daylight savings settings on my computer, changing it manually on my iPod, and it still hasnt worked right after updating to 4.0.2. The only thing I havent tried is restoring my iPod. I havent done this because I ripped all my cd's to one computer, and since I moved its been in storage. Thats about three hundred of five hundred of my songs. Is there anything else I can do? Could I go to the local Apple Store and have them completely back it up and restore it? If you've actually read all of this, you're a very patient person and I thank you just for that

These are (most likely) separate issues that need their own threads, having a laundry list is not very helpful. For the microcode stuff, read up on the wiki page if you're still uncertain. There shouldn't be any issues, especially since the microcode is loaded as a module and isn't permanent.
https://wiki.archlinux.org/index.php/Microcode
The rest of these issues we can't help you with much unless you provide more information about your setup.
Last edited by SolarBoyMatt (2013-04-19 19:55:43)

List of issues with DM6.0

Here's my list of issues with Desktop Manager 6 that I would like to see addressed.
1) No minimize to system tray. This isn't a huge deal but I'd like to see it return.
2) Halt incoming e-mail to device when connected. This needs to come back. I don't need my Blackberry buzzing on my desk every two minutes when I'm sitting in front of my e-mail client.
3) Folder sync selection. My mail server has rules that automatically sort incoming e-mails into different folders. I'm pretty sure practically everybody in an enterprise e-mail environment does this. In previous versions of DM, there was an option to choose which folders to sync. This is now gone, although I believe because these settings end up stored on the BES server my settings have remained for now. Moving forward, I can't change any of them without talking to our BES administrator.
4) Automatic backup is broken. I've set DM to automatically backup my device "Weekly" when it is connected. What actually happens is every time I connect my blackberry it gets backed up - this can happen multiple times in one day. Pretty useless.
5) Mass storage mode settings on blackberry are bypassed. I have my bb set to prompt whether I want to enable mass storage mode when I connect it. Now, when I connect my bb it immediately enters mass storage mode without a prompt on the device or on the desktop. I have this configured because if you use any kind of custom ringtone, even if it is stored on the internal memory and not on the media card, as soon as mass storage mode is enabled the bb cannot access the files internally and ringtones default back to a standard generic one. I can no longer wander away from my desk and hear my phone ringing and identify that it is my phone.
That's my current (growing) list of issues. I will update with more, if anyone wants to confirm these issues or add others I will add to the list as well.

you need to add media administration is non existent without Roxio Media Manager. You can no longer pick and choose which files to exchange. Synching is the only option.
Also, if media files are encrypted, DM 6 cannot read them. This was dealt with in Roxio Manager by simply inputing the encryption password...

E72 - List of issues...!!!!

E72 - List of issues...!!!!
I’m really disappointed in nokia..!! L I’m a nokia user for the last 12 years; I purchased and used more then 22 different models .. Never changed to any other phones. and was always proud of using it…will not any more.
In addition of to the bad built material and being really slow ‘Nokia can’t build a better processors..!!!’ I couldn’t use neither chat or email.
Email is not working at all; I added two emails one ovi and one hotmail… I can’t remove them…!!! I tried every thing even Nokia configuration tool.
Configuring the chat open new window and then do nothing.
I was late for work for two days because of this phone..!!! I setup multiple alarm, it alarmed once then the phone hanged and started flashing…!!! When I woke up two hours later I had to restart the phone; and then it started running the alarms..????
Space stop functioning many time….
PC suite lose connection to the phone after performing any function “USB connection”.
Nokia configuration tool do not import any thing it just hangs for 10-20 minutes and then lose connection (Import synchronization status was DM_UNKNOWN in syncID 1).
The USB charging feature is nice, but it shouldn’t alert me always about the better being full…????
Iv done a restore factory setting (hoping that the configured email will be removed).. nothing was removed neither the contact images or emails…
The phone in general is really..really slow…!!!
Other issues that I cant’ remember…!!!????
In addition to all of that I can’t take the phone back even for replacement ‘I’m from qatar’ and the agent’s are really bad. For sure this is my last nokia unless the issue was fixed in 2 weeks.

The biggest problem about this phone is about the high pitch sounds.
When the screen and the keyboard light up, some high pitch sound is emitted. For most of people, that's not annoying, but for some, it gives headaches. Two persons sayd that they hear that sound.
Personally, i can't use it, so for this matter, i need to sell it. In Romania Vodafone is not accepting your phone back even in 12 hours.
I tryed different phones from Nokia, the last ones have the same issues. N97 and N97 mini are terrible. It's impossible to use those phones.
For this reason, Nokia you receive a small grade, it's unacceptable to cut back prices just for bigger earnings.

Anyone have list of issues fixed in 8.01? thanx...

Hi all (happy holidays)
Anyone have list of issues fixed in 8.01?
thanx...
ps: I'm on a G5 and was hoping that 8.01 runs noticeably better now....
SvK
Message was edited by: S v K

I'm one of the people that traditionally doesn't experience too many issues with Logic that affect me. However, 8.0.0 and 8.0.1 have many issues that directly affect me, including many MCU handling bugs, screenset handling bugs and quite a few others besides.
Maybe, like with Logic 7, we'll get to a paid update for 8.1 that finally becomes workable... until then, well, hang on to the sides, it may well get bumpy..!

List of issues with patch level

Is there a list of application errors reported for each patch level?
When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

There are also notes for those Lists of issues with each patch level for B1. What is your B1 version and PL?
Thanks,
Gordon

List of issues under investigation by Tech Support

I would like to be able to see somewhere the list of issues which have been accepted by Tech Support as problems and are under investigation for correction in future releases.
Despite all care taken to stay as long as I could in LR 1.2, which after few bypasses worked fine for me, I migrated to 1.3.1 and discovered I had missed a couple of problems (Quick Develop Reset no longer works in 1.3/1.3.1, nor does flag as rejected with filter set to Pick and unflagged only).
Reading the posts made by users having the problem, I am unable to find out if Tech Support are aware of this, nor if they have accepted the problems described as issues to be fixed.

I am sure ADobe knows of the Reset Problem. Time will tell if it gets fixed with the next Version release.
I don't know about the other Pick/Reject issue.
No Adobe does not do a list of known issues displayed for Users to see.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D
See LR Links list at my
Blog for related sites.

A List of Issues and Problems in CS3

I've been logging concerns I have with CS3 over the course of a few edit sessions. I'll list them and see if anyone has any solutions or ways to make these quarks a little more tolerable. (I'm coming from Pro 1.5 into CS3)
My Current Configuration:
Dual socket Xeon Quad-cores (8 cores total)
4GB memory
1TB storage drive
Nvidia Quadro FX4600
b 1. Can't scroll ahead on timeline when playing the timeline
It used to be that I could advance my view forward or backwards while the timeline is played. Now it snaps back if I try to scroll outside the area currently playing back.
b 2. No XDCAM EX Export
I haven't found an adequate HD export at all in CS3. Does everyone just export uncompressed AVIs when they want to move to AE or Encore? Even a HDV export would be nice, but I don't see that either.
b 3. Major Memory Issues
I setup two static PSD files on top of a BMP without any effects or motion settings. Memory warnings came up stating memory was low. Looked at my stats in the Task Manager and I was running ~500MB of a Page File and ~2GB of used memory. Very odd. Set the memory settings in Premiere from performance to memory and it didn't help...
b 4. Title Window Doesn't Hold Panel Positions
Each time I open the title window, the configuration is different; the toolbars are usually squished off to one side of the window. Even after resizing these panels and closing the titler, it comes back with a different configuration.
b 5. Title Window is Slow to respond
I feel like I'm running Premiere's titler on an old Pentium when I go to add or change text. It lags so much, as if the processors are pegged out, but the computer isn't crunching anything. The processors don't even flinch at this process, yet the titler is furiously sluggish.
b 6. Resize Program / Source Windows
The scroll bars stay even when the enitre image at 100% is seen. Tons of gray area around the source window, but it still let's me scroll up/down/left/right... nothing there buy gray void. Why the scroll bars??
b 7. STILL no batch render
I've been wanting this feature back since v6.5. It was very handy to render out multiple projects unmanned using the Batch render. Why can't we have this in CS3?
b 8. AfterEffects doesn't have support for XDCAM...
I'm off topic a touch, but it does make one wonder how to transpose a XDCAM project from Premiere CS3 into AE CS3 when it doesn't have the ability to support it.
Well, that's my rant. Any help in any portion of these blunders would be great. You don't have to respond to all of them, just reference the bullet numbers of interest and let's have a discussion.
Thanks,
Spires

And what troubleshooting steps have you attempted so far?
And updating your device's iOS is always optional. No one forced you to do so.

S_ALR_87012168 List Header Issue

Dear Friends,
I Am facing problem to resolve the issue as in the standard FI Report S_ALR_87012168 need to hide the list header because if I am executing the report for multiple customers than its displying the all customers in list header so while I am scheduling background job or printing than its printing all the customers in each page than the report data..
Kindly suggest me how to hide the list header, is there any standard cutomizing or enhancement.
Thanks,
DTK

Hiya
Click on the Currency icon {Ctrl + Shift + F9} and select whatever currency you want it to be displayed on.
It gets converted. Then when you hit the green arrow back, it will sk you whether you want to save the data, if you click yes it gets saved.
Then everytime you execute this report, it will ask you, which layout you want to be displayed as the output - and you can select the one that you saved. And it aint user specfic either. The pop up Qs comes up for all users.
Rukshana

List view issues

version 12.1.2
I have a list view with 2 rows, 2 columns. column sizes are ( c1 = 85% and c2 = 15 %). C1 displays table data, and c2 has a button on each row, which takes me to different page.
When I click the button I am expecting it to take me to the next page. But for some reason I have to click the button twice to go to the next page. When I click the first time, it only highlights the
row, then when I click the second time, it takes m to the next page. Is there any special settings I need to change for a list view?
First I tried implementing row double click by using client/server listeners to take me to the next page, it showed the same behavior (had to double click twice to go to next page). So I thought it might have something to
do with the client/server listeners not working correctly. So switched to using button to go to next page and I am still seeing the same behavior. Here is my code, I would greatly appreciate any help.
<af:listView value="#{bindings.emp1.collectionModel}" var="item"
                                                 emptyText="#{bindings.emp1.viewable ? 'No data to display.' : 'Access Denied.'}"
                                                 fetchSize="#{bindings.emp1.rangeSize}" id="lv1"
                                                 partialTriggers="::b6" selection="single" immediate="true"
                                                 binding="#{SomeBean.empListView}">
                                        <af:listItem id="li1">
                                            <af:panelGridLayout id="pgl3">
                                                <af:gridRow marginTop="5px" height="auto" id="gr1">
                                                    <af:gridCell marginStart="5px" width="85%" id="gc1">
                                                        <af:outputFormatted value="#{item.bindings.empId.inputValue}"
                                                                            id="of1"
                                                                            inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
                                                                            binding="#{MouseDoubleClickBean.empID}"/>
                                                    </af:gridCell>
                                                    <af:gridCell marginStart="5px" width="15%" marginEnd="5px"
                                                                 id="gc2">
                                                        <af:button id="b4" icon="#{resource['images:add_ovr.png']}"
                                                                   action="callEditFlow" rendered="true"
                                                                   visible="true"/>
                                                    </af:gridCell>
                                                </af:gridRow>
                                                <af:gridRow marginTop="5px" height="auto" marginBottom="5px" id="gr2">
                                                    <af:gridCell marginStart="5px" width="85%" id="gc3">
                                                        <af:outputFormatted value="#{item.bindings.empName.inputValue}"
                                                                            id="of2"
                                                                            inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
                                                                            binding="#{MouseDoubleClickBean.empName}"/>
                                                    </af:gridCell>
                                                    <af:gridCell marginStart="5px" width="15%" marginEnd="5px" id="gc4"/>
                                                </af:gridRow>
                                                <af:clientListener method="doMouseDblClick" type="dblClick"/>
                                                <af:serverListener type="CopyEmp"
                                                                   method="#{MouseDoubleClickBean.copyEmpDetails}"/>
                                            </af:panelGridLayout>
                                        </af:listItem>
                                    </af:listView>
           <af:resource type="javascript">
                function doMouseDblClick(evt) {
                var btn = evt.getSource();
                AdfCustomEvent.queue(btn, "CopyEmp",{},true);
                evt.cancel();
           </af:resource>
Thanks.

Hi,
can you try af:commandButton to see if it is a problem with af;button. If this doesn't work then it appears that there is an issue with the focus setting preventing the action to come through. A work around in this case would be to override the SelectionListener on the vlieView component and to queue the command button action (the downside is that each time you select a row it will navigate (which means you could set the button display to hidden).
I suggest to file a bug with support. If you don't have a support contract, please zip up a simple test case based on the HR schema and send it to frank <dot> nimphius < at > oracle <dot> com (replace the <dot> with . and <at> with @). The testcase should be zipped and renamed to ".unzip" as the extension
Frank

IPhone 4 Calendar Entries: List Display Issue

I believe a derivation of this issue has been posted a handful of times already, but I wanted to add to the pile in the hopes that Apple addresses a calendar bug. My iPhone 4 is running OS 4.2.1, and I sync my calendar with Microsoft Outlook 2007 via a PC.
Recently I've noticed that when changing time zones, the "List" view of my iPhone calendar has trouble displaying the proper date of appointments when they are entered or changed in the iPhone directly. Two "Tue Nov 30 2010" gray bars will suddenly appear, for example, and previously entered appointments for that date will scatter amongst these two sections haphazardly.
Interestingly enough, when clicking into "Day" or "Month," these entered appointments will display properly. It appears, then, that this issue is only present in the "List" view.
Somewhat bizarrely, these sections in the "List" view will compress back into one (as normal) when the offending appointment is deleted on the iPhone. Moreover, when new appointments are entered via Outlook and synced with the iPhone, the calendar displays as normal in "List" view.
This issue has plagued my phone for a handful of months now when I transition time zones, but only recently has it not reset itself upon syncing with my computer. This leads me to believe that the issue may have been exacerbated by OS 4.2.1. For what it's worth, time zone support is "off" on my phone (meaning appointments display in local time).
Any help you can provide with this issue is appreciated.

Good to hear that I am not alone.
I have the same problem (for some time now, not just 4.2.1). I have tried deleting my calendar and resynching with Exchange with a reboot in between (as suggested in another problem report), but that does not help.
For me the problem started when I started bidirectional synching with Exchange (updates on iPhone are sent to server and updates on server are sent to iPhone, immediately in both directions) -- as if the iPhone calendar list search does not work well because the entries are "remote" (actually stored on Exchange server?).
There are similar quirks with Contacts but Calendar List Search is unusable!

Select List Performance Issue in Apex 3.1.2

Hi
It would of great help if you could suggest us for the following
We are facing some issues in Select List performance in Apex 3.1.2 version.
We have 6 select list and all have been cascaded i.e., values of each select list based on pervious list value.
Values in each select list are huge. Because of this, the performance is very slow.
It takes huge time to fetch the data based on other list values.
We cross verified in backend, the same query takes less time compared to the Application.
Any recommedation to fine tune this?
Thanks in advance
Vijay

if your select lists are very huge then it could be the browser that is causing the slow down.
try and create an example using a static HTML file containing a select list of the same size and you may find the same performance issue.
a quick way to create the test would be to save the source of your APEX page as a html file
Craig
[http://www.oracleapplicationexpress.com]

Adding items to custom list - performance issues - Request timed out error

Hi,
I am using VS 2010, c#.
I am inserting records from an excel file, which contains 6000 records to a custom list.
I am using the Visual webpart, and oledb connection. I am not using the openXML format, as i need to use "xls" and "xlsx" type.
I am doing the below steps currently:
1) From the file upload control, i am saving the excel to the sharepoint layouts - inside that a custom folder, to keep the records.
2) Using the oledb connection to read the records and fill it in a datatable.
3) Inserting the datatable values to a custom list.
Looping through the datatable and inserting 3000 – 4000 records to List, I am getting the "Request timeout error".
Below is the sample code, where i am looping the datatable and inserting the record:
SPList prjCmpList = oWeb.Lists[strListName];
SPListItemCollection prjCmpListItems = prjCmpList.Items;
SPListItem prjCmpListItem;
foreach (DataRow dr in dt.Rows)
try
prjCmpListItem = prjCmpListItems.Add();
prjCmpListItem["Title"] = dr[0];
prjCmpListItem["FirstName"] = dr[1];
prjCmpListItem.Update();
catch (Exception)
I am using the "using block" for the spsite and web objects. When I see the execution time out in my web.config it is set to 3600. But I am getting the request time out after 2 mins only.
I have checked these link's : http://msdn.microsoft.com/en-us/library/aa973248%28v=office.12%29.aspx
http://www.etechplanet.com/blog/how-to-import-an-excel-spreadsheet-in-sharepoint-and-save-it-as-a-custom-list.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8664375c-fae0-483a-b43f-ce7d353b896a/importing-3000-records-to-sharepoint-list-causing-requesting-time-out-error?forum=sharepointadminlegacy
However, I am following the best practices, and also the insertion of records is to be done programmatically.
Has anyone faced this kind of issue? How to fix this?

HI,
Thanks for the reply.
If the list has custom columns which consists of string and Date types, can the same type be used? Or should the list be an empty list without any columns?
In the xml if it is put as "onerror= continue", how to fetch the records which error out?
Also, in the datatable code block, which I had put in the first post, I am also trying as below:
if(dt[1] != null)
if(!string.IsNullorEmpty(dt[1].toString())
prjCmpListItem["FirstName"] = dt[1].toString();
Can these condition checks be performed with the "processbatchdata" approach?
Thanks

Laundry list of issues

Similar Messages

Maybe you are looking for