LBWE - 2LIS_02_SCL and 2LIS_04_P_MATNR activation issue

We use client 010 as configuration client and 030 as development client. When I activate the datasource in LBWE it shows active in client 010 but is not active in 030. Due to this we are not able perform setup and retrieve any records.
Why is the datasource inactive in 030? how can I activate the datasource in 030?
Thanks

hi Kumar
GO to RSA5 and check the datasource..and install the datasource.Once installed check in RSA6 and select the particuler Data Sources and Select the Transport Button.
and Delete the Setup table (LBWG) for Required Data Sources and
goto LBWE try Again for Filling the Setup Table.
hope helpfull

Similar Messages

2LIS_04_P_COMP and 2LIS_04_P_MATNR delta issue

Hi experts,
I am having problems with 2LIS_04_P_COMP and 2LIS_04_P_MATNR delta extraction.
I run the init, it is ok. I create an order and then I run DELTA expecting to get more record(s).
DELTA will bring no records. But if I delete set up tables LBWE, initialize them again, and then run the init again, the new records will be available.
Has someone had the same issue? I can't find the reason why the delta extraction does not bring the new records, if I don't re-setup the tables in LBWE.
Thanks in advance for your help,
Best Regards,
André Oliveira

Thanks for your help.
In job control window I do not have the green check button, only the cancel (red cross). When I try to schedule the job it gives me an error "error creating a job", so only I can do is save a start date and periodicity in job parameters. Is this ok?!
I also wrote sap a message because I am trying to enhance it with two fields (they are in LBEW), but same happens... I just see a cancel button, never a green check to validate and accept. I have done all the recomendations. I put the message I wrote below hoping you can give me some insight on this issue:
am trying to do an enhancement to extractor 2LIS_04_P_COMP.
+I go to LBWE and select these 2 fields:
MCAFKO GAMNG Qtd.teór.
MCAFKO GMEIN UM básica
The problem is that in the selection window to select these fields from
pool (scroll down box) to selection criteria (scroll down box) the
button to accept these changes does not appear (I mean the button with
the green check). So it is impossible to add this fields to the
structure. Is there any reason for this not to appear?
I think I have done everything that was needed:
LBWG: delete setup tables for 04 (production application)
RSA7: delete 04 queues
LBWQ: delete 04 queues
LBWF: check for active maintenance logs (does not exist any)+
Some points already assigned.
Best regards,
André Oliveira
Edited by: Andre Oliveira on Feb 23, 2010 12:01 PM

TS4268 iMessage and Facetime activation ISSUES

I had inserted my friend's SIM card in my iPhone when i first bought it. A few hours later I inserted my new SIM card into the phone. Everything worked fine besides iMessage and Facetime. After a day Facetime started working and started to display my number as the default one (Earlier, it used to display my friend's number). However, iMessage is not yet activated. It still shows my friend's number when i check the settings and all i see is that its "waiting for activation". My wi-fi and 3G connections are working fine. Have laready tried switiching the phone off and restarting it. Have also put my number in the 'Phone settings". No matter what I'm doing, the my number is not being displayed in iMessage and only my friend's number is showing.
Please help.

Back up your data and do a reset all settings. This should work.
Settings > Geenral > Reset > Reset All settings In case this does not work connect to your iphone and make sure you atake a back up again and then restore. This will definately work.
Cheers,

Why 7.0.3 update still does not fix my iMessage and Facetime activation issue

Can someone help me fix the issue

Hi rudeboouuy,
This KB article may provide more information on the issue you are having with your Active Sync email. ""Your device is connected to a network but the Internet service is not available. Check your network settings." is displayed when setting up a personal Microsoft ActiveSync account on the BlackBerry 10 smartphone using port 80" http://blackberry.com/btsc/KB34244
Let me know if that helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

FaceTime and iMessage activation issues in New-Caledonia

I reside in New-Caledonia, a french territory in the Pacific, and I am unable to activate either FaceTime or iMessage on my iPhone 4,
My kids (a 5 and 3 year old) have iPods and they have no issues. So I know I am setting things up correctly :-)
Is the reason based on the fact that for iphones an SMS is sent out and that New-Caledonia's country code is +687 as opposed to +33 for France ("where our itunes account is") which means that as a result we are not getting the return SMS from England to activate the service?
If so, do you know of any work arounds? Who do i need to write/speak too?
Thanks

I take it all back !!! By calling/messaging from their accounts it seems to have set mine up

Save and Close button issue in CRM 2013 for Activity Type Appointment

Hi All,
Have come across a strange behavior in CRM 2013 and would like to be sure that it really is an issue which others have encountered too.
Open a Case record, and click on Activity navigation link to see the Open Activity Associated View. Then try creating an Activity of type Meeting and click on
Save & Close button (not just Save). When you refresh the view, the activity might show up. But repeat the same steps and create another Activity of Type Meeting and this activity will not show up. It doesnt show up even in the All Activities
view. Seems like the activity does not get created when using Save and Close button.
This behavior is replicated even on online 30 day trial version. Any inputs?
Regards,
Yogesh

The problem only occurs when your appointment times clash. "Save and close" just throws the appointment away. "Save" tells you about clash (or perhaps it's just unavailability) and allows you to ignore and continue with the
save.

Urgent.. issue in MM loading: 2lis_02_scl and 2lis_02_itm

Hi Gurus,
I am getting a short dump when i am trying to load the data from datasources: 2lis_02_scl and 2lis_02_itm.
It is giving the error message : "
   "MESSAGE_TYPE_X" C
   "SAPLRSC2" or "LRSC2U01"
   "RSC2_QOUT_READ_DATA"
and even the repeat of delta has failed again.
Can ne body please help as this is business critical issue.
Thanks in advance,
Anurag Rathore

Hi
There is one other method where in youc an go to the Item and Schedule line tables ( EKET) and filter on created on and load those documents into BW.
However this is tedious process as you many have several documents to fill the setup tables
This is just another alternative..
Regards,
Srini

Project Centre - Active Issues and Active Risk columns always show 0

Hello,
We have created a number of Project Centre views to which we have added the "Active Risks" and "Active Issues" columns against projects. No matter how many active issues or risks a project has, these columns are always showing 0 for each
and every project.
The reminders web-part on the PWA home page, and the Issues and Risks page (/PWA/IssuesAndRisks.aspx) correctly show these counts for a user, but Project Centre does not show the values correctly for projects.
We have not changed the values in the "Status" column of either list - they're still the default "(1) Active", "(2) Postponed" and "(3) Closed".
All issues and risks are correctly promoted to the reporting database on publish or when a list item is added/updated/deleted etc.
Our environment was upgraded from Project Server 2010 to Project Server 2013 and we're running service pack 1.
If not now, when?

Hello,
There fields don't actually work, if you want to see the active risks or active issues per projects in a summary row, create a report from the Reporting schema in the Project Web App database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.

On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.

Attention: Currently we are experiencing intermittent update failures. We are aware of the issue and are actively working to resolve.

Attention:
Currently we are experiencing intermittent update failures. We are aware of the issue and are actively working to resolve.

Hello,
This issue is resolved. "Local Upgrades are successfully restored as of Tuesday, January 18th 16:00 PST.
Please contact Customer Support if you have any additional questions or concerns.
Christopher C Smith
CSE
Cisco IronPort Customer Support

Daily activity help for script... and investgating some issue

hi
i am new to apps.i fil i need some script to solve some daily activity issues and solving some issue.
can anyone help me or list of issue(s).I know it may different from site to site but i want very common list.so that issues could be resolved quickly.
regards

hsawwan wrote:
Hi,
invalid object lists and number.Query dba_objects for invalid objects and compile it either manually or via adadmin.yes. i know but i need to schedule this with scripts so that it will compile jar files,invld obj etc.
>
failing patches.Check the patch log file.
diagonostics failed patches.Check the patch log file as well as the workers log file.where is the worker logfile?
>
backup of archivelog and database.Test the backup periodically.how?
>
gathering statistics for apps and dadatabase users.Schedule "Gather Schema Statistics" concurrent program on regular basis.option is dbms_job right?
>
specific concurrent manager/log lists for specific requests.Check the CM log file along with the failed request log file.i notice FND<sum number>.log usually created for this but for specific log file is needed to query from db.for this reason i want to use some scripts.
>
shrinking apps tablespaces to utilise the spaces and enhancing the performance of apps.Shrinking tablespaces does not enhance performance.
may not enhance performance but may enhance the disk space.
See (Note: 122669.1 - How to Perform a Health Check on the Database).
monitoring alerts.
monitoring forms and report and generating trace files.You can do from OAM.
monitoring triggers Write an alert to notify you in case the status of the triggers changed.
startup total apps and shutdowns total apps (this actually sysadmins of clients want)Usually, we review the startup/shutdown scripts log files.
total cloning process within a night.You will have to review the log files.
Thanks,
Hussein

I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues ove

I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues over the phone. Adobe doesn't care about their older products - they don't care that I spent hundreds of dollars for CS3. This is truly disgusting corporate behavior. Is there anything I can do? We aren't all rich photographers. I paid a great deal of money for this product. Is it now useless?Thank you,
James Scott

HI James please contact the Adobe Chat Team for activation issue
kindly do the mentioned steps as follow in order to get hold of chat rep of adobe
Go to www.adobe.com/getsupport
select the product as adobe creative suite - then select the issue as adobe id and sign in - and then click on still need help contact us then you will be able to find chat option and they will help you with the chat issue

2lis_02_scl and 2lis_02_itm

Hi developers,
I've activated the extractors 2lis_02_scl and 2lis_02_itm, when I do the initalitation in the setup tables I don't see any record also if in the execution log there are 7230 documents.
Any ideas to solve my problem?
Best Regards!

Hi Roberto,
Thanks for your answer!
You have understood my problem! After the setup OLI3BW for MM-PUR in the table MC02M_0SCLSETUP and MC02M_0ITMSETUP there are not entry and in LBWE I've activated the extractors.
The Extractor LIS for area MM Stock and SD work perfectly.
The problem is only for 02MM! I've opened an OSS note but none answer!
Can you help me, plese?
Thanks a lot!

Gmail/Exchange email and calendar syncing issues

I have wiped my email accounts several times and entered in my data in the various ways as shown through the forums but my email accounts do no sync properly whether it is manual or active synced.
I read my emails in my gmail and my Microsoft exchange account and will delete or file them away but then when I check my accounts on my desktop, they are not synced as I've done so on my phone. I've also noticed that my calendars are not synced correctly either.
Could someone help me understand why and how these issues can be fixed? I'm in meetings for most of the day so I rely on my phone to keep me mobile. Was this a bad purchase?!?!

Hi JadeyMU,
How do you have your Microsoft Exchange account configured on your BlackBerry Z10? Are you using ActiveSync, BlackBerry Enterprise Server (BES), IMAP or POP?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

What is diff b/w pick and switch activity in bpel?

what is the difference between pick activity and switch activity in BPEL? example Please

1)The switch activity is an IfElse with two different flows, based on a conditional expression, derived out of existing message(s) in your process.
Eg. i) Whether the salary is greater than 10,000 or not.
ii) Whether the age is greater than 60 or not.
iii) whether the department is finance or not.
2)The pick activity is an IfElse with two different flows, based on two different messages/signals, that you can expect to receive(when you are waiting for a message) from outside of your process.
Eg. i) whether you received a reply message or a timeout signal.
ii) whether you received a AddNewEmployee message or UpdateEmployee message.
The (decision for which route to be taken for) pick activity is based on the MessageType, while the switch is based on the contents in a message. The pick activity implies that you are waiting for a message, this can occur, at the start of your process or in the mid of your process. However, switch activity doesnot wait for any message, hence can only occur in the mid of the process and can not be the start of a process.
Mark the posting appropriately as "helpful" or "correct answer", if your issue is solved.

LBWE - 2LIS_02_SCL and 2LIS_04_P_MATNR activation issue

Similar Messages

Maybe you are looking for