LENOVO SERVICE CENTER NOT RESPONDING GOOD IN CHENNAI

I gave my phone (LENOVO A6000)to service center 15 days ago...
I gave it because the sum was not recognized after update...
So I thought it was a small problem and gave it to service center ....
They said the imie became invalid so they have to insert a new board
Today I asked about the progress they say...
They requested to Lenovo for a new board .. but they still did not receive it
How much time should I wait???
Will I get a refund???at least???

Hmm anyway I think I can fix it...
By changing my imei to normal...
Using xposed module
But I shall wait till this month ends and after that..
We'll see...

Similar Messages

Lenovo Service Center in Noida, India???

Hey Guys,
My IdeaPad laptop's warrenty ended arround 6 months ago... I want to get service done for my laptop from authoried linovo service center... I don't mind paying for it but after checking online I was not able to find any service center in Noida... Can anyone let me know the address of Lenovo service center in Noida?? If there is no service center in Noida then please let me know the address of service center in Delhi...
Thanks a lot for your help in advance....
Regards,
Mohit

hi mohitsharma287,
Welcome to Lenovo Community Forums!
For some Lenovo Repair Services, it is a mail in process,
I would suggest to call Lenovo Technical Suppor tin your Location to know the repair process.
Spoiler (Highlight to read)
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Error 1053: The service did not respond to the start or control ...

Dear SapService,
I've installed a BI7.0 (ABAP only) instance on cluster with :
windows 2003 x64 SP2
SQL server 2005 x64 SP2
WAS 7.00 kernel 80
*the service runs with domain user.
I've upgraded to kernel 114 (latest). After the upgrade the ASCS service doesn't start. It throws error:
"Error 1053: The service did not respond to the start or control
request in a timely fashion"
To solve this problem I've tried:
-go back to kernel 80 but I still get the same error.
-start the service manually on the second node. Still same error.
-restart the two servers and try again to start the service on the
nodes.
Any ideas ?
Please advice,
Dimitry Haritonov

Hi,
Check SAP Note 82751 - Problems with SAP Services & SAP Service Manager
for some initial investigation.
Regards,
Siddhesh

ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))

One of my clients has his dpm server turned off for a long time. Now when that server is back online I cannot re-sync backup. First was database in suspect mode and I was not able to acess dpm console. Now when I fix that I cant re-sync job. I even tried
to delete on PG and recreate it but without success. Agent showing OK and it can comunicate with server. I have even tried to uninstall agent and re-install it but without luck.
ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))
That is the error what I get on all protection groups. Is there any one who can help with this?
And last thing is that DPM is crushing on recovery tab

Hi
Do you still need assistance with this?

Error 2186: The service is not responding to the control function

Every time I start the Messaging Server I get an error message. The server
is running and no event log errors are reported. I see:

Could not start the <%hostname%> on <%computername%>.
Error 2186: The service is not responding to the control function.

This occurs because the system does not have enough remaining memory to
create a new desktop heap for the service being started.

The limit can be raised, but doing so requires changing registry entries to
allow more but smaller desktop heaps for Windows NT services.
The best solution is to limit the application connector instances to seven
or less.

For instance, you may make a change from 0 (zero) to 1 (one):

HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Control
Session Manage
HeapDeCommitTotalFreeThreshold

Or press Ctrl-F to find "heap".

Nvd,
I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
node=132060_US
If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
Jed R.
Applications Engineer
National Instruments

Updated 7.1 having iphone 4 but temple run2 not responding good, calling interface is little slow.. hope apple will solve it..

updated 7.1 having iphone 4 but temple run2 not responding good, calling interface is little slow.. hope apple will solve it..

Try to solve it yourself... Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Lenovo g560 motherboard crash service center not helping now what to do

hi
i have purchase a lenovo g560 laptop on 2 june 2010. after a weak the motherboard get corrupt.now my system is not going to start.
i launch a call on indian head off with call id=4270018809 and they sujjest me to go the service center located at noida.
after going there they put my laptop for 1 week and after 1 weak they are saying we dont have the mother board.and they request to head office for this it will take uncertain time and i can take laptop without getting repaired.now what to do can this laptop get replaced any where help me its urgent.
thank in advance
Solved!
Go to Solution.

call lenovo support line to ship your laptop back to service.
if you have recovery disks, use it instead of shipping back to lenovo.

Service center not return my phone.

Hi and Welcome to the Community!
To set your expectation about participation in this forum, please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540549Hopefully, this information will be of use to you. We are volunteers, not BB employees...sometimes BB folks post here, but it's rare...maybe you will get lucky. But you really need to escalate with your Service Center, to their management and above. Your contractual and financial relationship is between you and them, not between you and BB.
Cheers, and Good Luck!

Dear Sir/ Madam,
Subject: Phone is misplaced by SG InfoTech
I had given my recently purchased Blackberry Mobile for repair to Blackberry Service Center- SG Infotech Borivali West branch on 31/12/2014 (Work Order No: {REMOVED} & Case ID: {REMOVED}) for repair work under warrenty, I was told that I will get my Handset back by 7 working days. Now it has been more than 7 months I have not received my Handset back.
The telephone no provided on the receipt is of no use, no one picks up the call ever. So I have to go to the service centre again & again. I had visited the service center many times & every time I get the same answer that it will take some time, the phone is still with the company.
My last visit to the service center was on 16/07/15 where I met the center in charge Mr. Mahesh Swami. This time I was told that they cannot find my phone it is misplaced & the attitude of Mr. Mahesh was very bad & unprofessional.
Now I am helpless, please let me know how I can get my phone back. I did a very big mistake by buying a Blackberry phone.
Thanks
Regards
Sunil {REMOVED}
Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

IPhone 5 control center not responding

I've just updated my iPhone 5 to iOS7 today. However, the control center is not responding (swiping up). I've made sure to turn the access on lock screen and access within apps both on in Setting, but still no dice. Any help would be appreciated! Thanks...

Restore iPhone with current iTunes on your computer. See if better. If still problem it will be covered by Warranty, make Genius reservation or set up Service and take or send to Apple for resolution. Until you get this corrected you can use Virtual Lock Button, Tap Settings App > General > Accessibiltiy > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. You can even turn OFF iPhone with this. To turn ON connect to power, charger or USB of computer.

Hard drive not recognized, Lenovo Care button not responding

I have a Lenovo 3000 N100 laptop. Type 0768
When powered up, it will not boot to the operating system. I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button. It will not respond to the Lenovo Care button. Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens. Pressing F1 changes the message to "Please Wait...", but again, nothing ever happens.
I followed the troubleshooting guide which said to try reseating the hard drive, but nothing changed.
Is it dead?

I had the same exact problem as b4blackhad
"I have a Lenovo 3000 N100 laptop. Type 0768
When powered up, it will not boot to the operating system. I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button. It will not respond to the Lenovo Care button. Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens. Pressing F1 changes the message to "Please Wait...", but again, nothing happens.
Word for Word same problem I faced.
I turned on my laptop while continuously pressing the "PrtSc" button upper right corner and it started up as normal!
I am not all that PC. Smart, very average. I saw solutions saying to press F1 TO F12 tried them all and nothing worked.
I saw "Remove hard drive" or "Replace Memory" OMG what am I gonna do now!!! Took a chance with "PrtSc" now I'm sooooooooooooo relieved, thanks Lenovo Community for all the tips that put me in the right direction : )

Notification center not responding

Despite the last update OS X 10.8.2 , the Notification center stops responding. I have to shut down/restart the iMac or to have kill the proces with acivity monitor. Most of the time when I restart or completely shut down and start I have to reset, by power button, my iMac (mid 2011) because the start procedure will not finish and end up with an empty desktop.
Today also email app froze on me. Is there an other update on the way to fix these problems or are there any suggestions that I could look into?
Kind regards,
Richard Gase

The next time you have the problem, note the exact times when it starts and ends: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Scroll back in the log to the time you noted above. Post any messages timestamped during that interval – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Lenovo service is not able to repair a X240 for 6 weeks now

For meanwhile 6 (!) weeks lenovo is not able to repair my X240. I never thought, that it would be so difficult to repair one of lenovos highend laptops with 3 years service and extended warrenty
I have to mention, that this ist my 2nd X240. The first one was replaced by lenovo, because it was so bad build, that the local lenovo service denied to open the laptop.
The new one (4 months old) had until now two new displays, three mainboards and a new SDD.
About the 10th of december i opened a service request at IBM ESC, because the laptop didn't boot and the new display (the one before died) showed such an extreme ghosting, that one could read on the lock-screen, what was on the screen, before i locked the screen. Second problem: the laptop didn't wake up from standby.
Got a ticket number, but the service needed weeks to get the needed parts.
In janaury 2015 the service showed up. Meanwhile the laptop booted again. They replaced the display and mainboard. The technician repaced the mainboard to be "sure" that this will not happen again. Result: the laptop didn't boot. His opinion: either the SDD or Mainboard or SSD cable is the reason. He did not use my "old" mainboard, instead he left and said they will contact me again. After he left i saw that he did not assemble the body of the laptop correct wtih the result, that above the rear battery the body was open and bent. And it happend.. nothing! They closed the ticket!!!
A week later the mailroom called and told me that ibm send a parcel. A new SSD! But.. no technician! So i called lenovo again. They told me to open the Laptop and replace the SSD. I refused that. The new X240 is not so easy to open. I told them too, that the SSD cable could be also the reason for the problem.
After DAYS (!) they send me a technician with a new mainboard and he repalced the SSD (which i had to send back to lenovo!). Again no success and he had no SSD cable.
I showed him the body of the laptop and he told me that this is not covered by the warenty. Pardon??? This was not my fault!
Lenovo didn't show up again until i called them. And again a new technician with a new mainboard and without an SSD cable showed up! And what happened? Right! Nothing! The new mainboard did not fix the problem! Surprise.
I called again the support. Told them, that i could not be so difficult to get an SSD cable and a technician.But.. they suggested to send the laptop back to lenovo to repair it. I told him that for 6 weeks the laptop is not working now and that i need that laptop fixed! I don't want to send it in and wait again weeks for the return. The extended warrenty says, that they will repair my laptop on my desk! He told me that he will solve my problem... And what did i get? Yeees, a sticker for a parcel and instructions how to contact UPS.
Sorry lenovo, that is the worst performance ever. 6 Weeks and lenovo is not able to replace a SSD cable and to get the laptop in the shape (closed body) that it was before 3 technicians ruined it.
So lenovo, sry, no carbon 2015 for me. I have to look for an other brand after a bunch of Thinkpads.

Thanks again - Alas, I've been there. Deleted Search a dozen times, at least, and tried installing it, initially using a PowerShell script (tried several scripts actually, from full-blown total Search Applications with extensive topologies to the most basic
of basics 'please just start without showing me errors'), PowerShell line-by-line to see where things went South, next tried installing through Central Admin (hoping that it was my own stupidity in overlooking things and hoping The System would get it right
for me), and eventually even tried using the config wizzard as a total and utter last resort - Nothing worked.
At first, I found out that removing a Service App needs a *little* bit more work than simply removing it through Central Admin, but by now I can truthfully state that if there's one thing I've become supergood at, it's removing Search Service Applications.Totally.
I will check out the article, though - I realized early on in my SharePoint experience that regardless of what you think you know, there's so much more to find out. I know, that's almost philosophical. That is, my friends, indeed the point I've reached...

Service center not getting approval from Sony India

Dear Samuel, First of all thank you for your concern about my issue. The problem is still unresolved. Today also i contacted the service centre but again the same replay " your work is rejected by the sony". This is the 5th sony mobile am using and now I am planning to approach consumer court. That is the last thing I can do for this genuine case. Thank you

I have purchased Zperia Z1 on exchange basis from Sony authorized service
center (Madonna Electronics,MG Road,Cochin) on 04/03/2015. Previously I had
Zperia ZL and due to mic complaints service center suggested upgrade. But
after purchasing Z1 and using 3 months I noticed mic problem in Zperia Z1
too (person on other side couldn't hear me).
So I submitted the device on 25.06.2015 for service and till now it is not
repaired.
From the service center they told me that your work is not approved because
whenever they try to create job it is automatically showing out of
warranty. That is eventhough the mobile is in warranty,site showing out
warranty. Service center has explained this issue to SONY INDIA but not
getting reply from SONY INDIA. So from their side they are unable to do
anything unless they get permission from Sony India.
So today (28.07.2015 at 11 AM) I contacted toll free number and talked with
customer care executive and we had conference mode with Mr. Jefrin from
modonna electronices.
Later getting enough information from Mr. Jefrin customer care executive
directed the call to one of the Manager in Sony India and I raised the
issue to him. Later the Manager called the Madonna electronics and one Mr.
Ajmal explained the technical issues to the Manager.
Finally the Manager told me to write a mail regarding the issue. I forwarded the same letter hope they will solve it

Network services do not respond until local user logs in!

My OS X Server install will not respond to ANY outside network requests (web, server admin, VNC, etc.) until I physically log in a user at the system itself (i.e. using the attached keyboard, mouse and monitor attached to the system.)
Obviously this is an issue after reboots etc. Thanks for any ideas.

I'm having a similar problem. VNC and server monitor don't work for me without physically logging in either. As you mentioned, this certainly is an issue with reboots.
I would recommend doing the version 10.5.6 combo update however, as it did seem to solve some of my other problems.

Game Center not responding

Game Center will not load is anyone else having this problem today

Hello Hiteshp,
Welcome to the Apple Support Communities. If you having issues with logging in to Game Center, the following article will have some troubleshooting steps to help resolve the issue.
Using Game Center
http://support.apple.com/kb/ht4314
If you are having difficulty logging in to Game Center or staying connected
Verify that you are connected to the Internet.
If you are unable to create or sign in to your Game Center account from within a game, try creating or signing in to your account using the Game Center app.
Try signing out of your Game Center account, and then sign back in.
If you can't sign in to your Game Center account with an Apple ID, try resetting your password or using another email address. To manage your Apple ID account, go to My Apple ID (appleid.apple.com).
When using a Wi-Fi connection, verify that your Wi-Fi router is configured for Game Center.
When using a Cellular Data connection on iOS, incoming calls will interrupt your game session. If your Cellular Data network does not support simultaneous voice and data, answering the call may end the current game session.
Regards,
-Norm G.

LENOVO SERVICE CENTER NOT RESPONDING GOOD IN CHENNAI

Similar Messages

Maybe you are looking for