Leopard not connecting to OSX Tiger Server but connects to reg Tiger Fine
Did a fresh erase & install test of Leopard on a intel Mac Mini. (twice) It will not connect to a Tiger OSX Server (Intel) or will occasionally after about 5 minutes. It will connect fine (instantly) to my non server Tiger Macs both intel & Power PC.
Anyone have a solution? 2 hours on phone w/apple escalated the issue but no answers yet
OK - some more info: new message tells me that the connection timed out - how can this be when the other macs on 10.5 are fine?
Similar Messages
-
"RTMFP" connected to the FMS server,but may not play multicast video?
the question is,a client which can use "rtmfp" to connect to a FMS server,and the connecting success,Whether Can not guarantee that the client can play the Multicast video?
because the client may be behind a Special firewall ，So he may connect to the FMS server ,but can not use P2P to connect to the members those are in the group?
If the answer is "yes",Whether i should make a check function that make these client back to "RTMP"?Hi,
Thanks for your interest in RTMFP.
The following resources would help in giving all the required and relevant information :
http://www.adobe.com/devnet/flashmediaserver/articles/real-time-collaboration.html
General RTMFP Documentation : http://help.adobe.com/en_US/flashmediaserver/devguide/WSa4cb07693d123884520b86f312a354ba36 d-7ffe.html
Port Requirements : http://help.adobe.com/en_US/flashmediaserver/configadmin/WSdb9a8c2ed4c02d261d76cb3412a40a4 90be-8000.html
Thank you ! -
Yesterday, I was unable to receive emails from Google but was able to receive them from another server - but then receiving them began to work again - but now I am unable to send any mail - Yosemite's Mail program does not recognize any of the server's connections that have worked for years, ! What do I do next?
Mail troubleshooting - Yosemite
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
Oh no i need to install tiger server but i lost the install disks.
Oh no i need to install tiger server but i lost the install disks. I also could use Leopard server on another mac.
Yikes!... they sure want a lt for it...
http://www.ebay.com/sch/i.html?_nkw=mac+osx+tiger+server
http://www.ebay.com/sch/sis.html?_nkw=Apple+Mac+OS+X+Leopard+Server+10+5+4+10+Cl ient+MB606Z+A -
Anytime I open Firefox I get the following message: It is strongly recommended that you apply this update as soon as possible. When I try to do it, it is showing that it is trying to connect to the update server but nothing is happening
If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
firefox says i have a update waiting but i try to install it and the software update box pops up and says (connecting to the update server) but thats as far as it goes can you please help me solve this issure
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
You do not need to create a new profile, that is not necessary for this issue
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I keep getting a message stating that it is critical that I update my Firefox. I click on the update icon and a software update box shows up and tells me I am connecting to the update server but the connection never happens. I have left it running for hours but no connection ever occurs. Should I ignore this or do I need to go to your website and download from there? I don't want to lose my current settings.
In the Task Manager, make sure to check both the Applications tab and the Processes tab. On the Processes tab, Firefox may have two different components running: firefox.exe and plugin-container.exe. Well, in 3.5.11, it would be only the first one.
-
Instagram is saying 'we couldnt connect to our login server' but my internet is okay and so is my AT
instagram is saying 'we couldnt connect to our login server' but my internet is okay and so is my AT&T connection. ive tried logging using both my wifi and AT&T network
It may well be that Instagram's server is having problems.
-
When I click the link Firefox shows a status bar and states that it is connecting to the update server, but the status never changes and nothing seems to be happening.
Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer
-
Two of our ipod touches won't connect to the home wifi. They have done before. All other apple devices connect fine. They can see the wifi devices, appear to try to connect (the circle whirls around) but connection doesn't complete. Ideas please?
I have 2 of them that only connected for a day and then reset network settings and they connected again for a day now resetting network settings does not fix it either. My iphone used to work with my home network but after upgrading to the latest OS which is the same versions as the ipods it no longer works either. Acts the same as the ipods. It would seem that the latest tweeks to the OS is the problem with wifi connectivity.
-
My new macbook pro (Mountain Lion 10.8.1) will not log into my 1and1 outgoing mail server. ( It will receive mail - but does not send)My old Snow Leopard macbook does not have the same problem ( server settings etc. are identical) . Apple Support say its a 1and1 problem , 1and1 say it is an operating System prob - I have tried changing port numbers.
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
my i phone wont connect to my cellular network but will connect to my wifi. it recently crashed so i restored it via itunes it restored fine and then wouldnt let me use my internet or send messages because i have no 3G how can i fix this?
No try this go to settings>general>reset>reset all settings "please note you will need to reput your wifi password in and nothing will be erased"
please let me know if this helps d:-)
jaydin curl "first level apple care rep" -
I am running Firefox 4.0 version, but for some reason, it tries to download updates and then gets stuck on trying to connect to the update server. This has been happening the past few days. When I close the update, I can proceed in Firefox without incident (that I know of).
See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then easiest is to download the full version and uninstall the currently installed version and remove the Firefox program folder to do a clean install of the new version.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
Cannot connect to Session broker server, but can to other servers in Cluster
Hi Everyone,
Hopefully this is the right place to post. Have searched quite a bit through the forums (not all 19000+ pages though), and can't seem to find a similiar issue.
I have also searched the internet and tried all solutions others with a similiar problem have.
This is my problem:
We have two servers running Server 2008 R2, set up as Remote Desktop Servers in a cluster setup.
The session broker is located on the second server (This is an active server which has sessions load balanced to it). There is also a DNS round robin setup
Problem: When sessions are allowed to be load balanced on Server2, then the users cannot connect to the cluster. The round robin seems to still send some sessions to the first server, and these seem to connect fine.
I suspected the issue was with the WMI Respository, and so started. I found a lot of errors, but have been unable to fix them.
I downlaoded the WMIDiag from Microsoft, and here is the report:
48866 15:56:44 (0) ** WMIDiag v2.1 started on 15 April 2015 at 15:48.
48867 15:56:44 (0) **
48868 15:56:44 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
48869 15:56:44 (0) **
48870 15:56:44 (0) ** This script is not supported under any Microsoft standard support program or service.
48871 15:56:44 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
48872 15:56:44 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
48873 15:56:44 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
48874 15:56:44 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
48875 15:56:44 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
48876 15:56:44 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
48877 15:56:44 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
48878 15:56:44 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
48879 15:56:44 (0) ** of the possibility of such damages.
48880 15:56:44 (0) **
48881 15:56:44 (0) **
48882 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48883 15:56:44 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
48884 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48885 15:56:44 (0) **
48886 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48887 15:56:44 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'MIBCO\CONN.LOMBARD' on computer 'SSCRDS02'.
48888 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48889 15:56:44 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
48890 15:56:44 (0) ** INFO: => 3 possible incorrect shutdown(s) detected on:
48891 15:56:44 (0) ** - Shutdown on 05 December 2014 22:55:28 (GMT-0).
48892 15:56:44 (0) ** - Shutdown on 12 December 2014 06:43:00 (GMT-0).
48893 15:56:44 (0) ** - Shutdown on 27 February 2015 05:19:26 (GMT-0).
48894 15:56:44 (0) **
48895 15:56:44 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
48896 15:56:44 (0) ** Drive type: ......................................................................................................... SCSI (DELL PERC H700 SCSI Disk Device).
48897 15:56:44 (0) ** There are no missing WMI system files: .............................................................................. OK.
48898 15:56:44 (0) ** There are no missing WMI repository files: .......................................................................... OK.
48899 15:56:44 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
48900 15:56:44 (0) ** AFTER running WMIDiag:
48901 15:56:44 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
48902 15:56:44 (0) ** - Disk free space on 'C:': .......................................................................................... 297281 MB.
48903 15:56:44 (0) ** - INDEX.BTR, 5513216 bytes, 2015/04/15 03:52:21 PM
48904 15:56:44 (0) ** - MAPPING1.MAP, 76804 bytes, 2015/04/15 03:50:51 PM
48905 15:56:44 (0) ** - MAPPING2.MAP, 76804 bytes, 2015/04/15 03:52:21 PM
48906 15:56:44 (0) ** - OBJECTS.DATA, 22036480 bytes, 2015/04/15 03:52:21 PM
48907 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48908 15:56:44 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
48909 15:56:44 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
48910 15:56:44 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
48911 15:56:44 (0) ** => This will prevent any WMI remote connectivity to this computer except
48912 15:56:44 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
48913 15:56:44 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
48914 15:56:44 (0) ** - 'Windows Management Instrumentation (WMI-In)'
48915 15:56:44 (0) ** - 'Windows Management Instrumentation (ASync-In)'
48916 15:56:44 (0) ** Verify the reported status for each of these three inbound rules below.
48917 15:56:44 (0) **
48918 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' GROUP rule: ............................................. ENABLED.
48919 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-Out)' rule: ............................................... ENABLED.
48920 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-In)' rule: ................................................ ENABLED.
48921 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (DCOM-In)' rule: ............................................... ENABLED.
48922 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (ASync-In)' rule: .............................................. ENABLED.
48923 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48924 15:56:44 (0) ** DCOM Status: ........................................................................................................ OK.
48925 15:56:44 (0) ** WMI registry setup: ................................................................................................. OK.
48926 15:56:44 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
48927 15:56:44 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
48928 15:56:44 (0) ** - SMS Agent Host (CCMEXEC, StartMode='Automatic')
48929 15:56:44 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
48930 15:56:44 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
48931 15:56:44 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
48932 15:56:44 (0) ** this can prevent the service/application to work as expected.
48933 15:56:44 (0) **
48934 15:56:44 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
48935 15:56:44 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
48936 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48937 15:56:44 (0) ** WMI service DCOM setup: ............................................................................................. OK.
48938 15:56:44 (0) ** WMI components DCOM registrations: .................................................................................. OK.
48939 15:56:44 (0) ** WMI ProgID registrations: ........................................................................................... OK.
48940 15:56:44 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
48941 15:56:44 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
48942 15:56:44 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
48943 15:56:44 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
48944 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48945 15:56:44 (0) ** INFO: User Account Control (UAC): ................................................................................... ENABLED.
48946 15:56:44 (0) ** => WMI tasks requiring Administrative privileges on this computer MUST run in an elevated context.
48947 15:56:44 (0) ** i.e. You can start your scripts or WMIC commands from an elevated command
48948 15:56:44 (0) ** prompt by right clicking on the 'Command Prompt' icon in the Start Menu and
48949 15:56:44 (0) ** selecting 'Run as Administrator'.
48950 15:56:44 (0) ** i.e. You can also execute the WMI scripts or WMIC commands as a task
48951 15:56:44 (0) ** in the Task Scheduler within the right security context.
48952 15:56:44 (0) **
48953 15:56:44 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
48954 15:56:44 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
48955 15:56:44 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
48956 15:56:44 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
48957 15:56:44 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
48958 15:56:44 (0) **
48959 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
48961 15:56:44 (0) ** - ACTUAL ACE:
48962 15:56:44 (0) ** ACEType: &h0
48963 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48964 15:56:44 (0) ** ACEFlags: &h4
48965 15:56:44 (0) ** NO_PROPAGATE_INHERIT_ACE
48966 15:56:44 (0) ** ACEMask: &hB
48967 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48968 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48969 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48970 15:56:44 (0) ** - EXPECTED ACE:
48971 15:56:44 (0) ** ACEType: &h0
48972 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48973 15:56:44 (0) ** ACEFlags: &h0
48974 15:56:44 (0) ** ACEMask: &h1F
48975 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48976 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48977 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
48978 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48979 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
48980 15:56:44 (0) **
48981 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
48982 15:56:44 (0) ** This will cause some operations to fail!
48983 15:56:44 (0) ** It is possible to fix this issue by editing the security descriptor and adding the removed right.
48984 15:56:44 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
48985 15:56:44 (0) **
48986 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48987 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\INTERACTIVE' DOES NOT match corresponding expected trustee rights (Actual->Default)
48988 15:56:44 (0) ** - ACTUAL ACE:
48989 15:56:44 (0) ** ACEType: &h0
48990 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
48991 15:56:44 (0) ** ACEFlags: &h4
48992 15:56:44 (0) ** NO_PROPAGATE_INHERIT_ACE
48993 15:56:44 (0) ** ACEMask: &hB
48994 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
48995 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
48996 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
48997 15:56:44 (0) ** - EXPECTED ACE:
48998 15:56:44 (0) ** ACEType: &h0
48999 15:56:44 (0) ** ACCESS_ALLOWED_ACE_TYPE
49000 15:56:44 (0) ** ACEFlags: &h0
49001 15:56:44 (0) ** ACEMask: &h1F
49002 15:56:44 (0) ** DCOM_RIGHT_EXECUTE
49003 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
49004 15:56:44 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
49005 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
49006 15:56:44 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
49007 15:56:44 (0) **
49008 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
49009 15:56:44 (0) ** This will cause some operations to fail!
49010 15:56:44 (0) ** It is possible to fix this issue by editing the security descriptor and adding the removed right.
49011 15:56:44 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
49012 15:56:44 (0) **
49013 15:56:44 (0) **
49014 15:56:44 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
49015 15:56:44 (0) ** DCOM security error(s) detected: .................................................................................... 2.
49016 15:56:44 (0) ** WMI security warning(s) detected: ................................................................................... 0.
49017 15:56:44 (0) ** WMI security error(s) detected: ..................................................................................... 0.
49018 15:56:44 (0) **
49019 15:56:44 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
49020 15:56:44 (0) ** Overall WMI security status: ........................................................................................ OK.
49021 15:56:44 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
49022 15:56:44 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 5.
49023 15:56:44 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
49024 15:56:44 (0) ** 'select * from MSFT_SCMEventLogEvent'
49025 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49026 15:56:44 (0) ** 'SELECT * FROM __NamespaceCreationEvent'
49027 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49028 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_EmbeddedObject"'
49029 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49030 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_Config"'
49031 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49032 15:56:44 (0) ** 'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy"'
49033 15:56:44 (0) **
49034 15:56:44 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
49035 15:56:44 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
49036 15:56:44 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
49037 15:56:44 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
49038 15:56:44 (0) ** - ROOT/SERVICEMODEL.
49039 15:56:44 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
49040 15:56:44 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
49041 15:56:44 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
49042 15:56:44 (0) ** i.e. 'WMIC.EXE /NODE:"SSCRDS02" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
49043 15:56:44 (0) **
49044 15:56:44 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
49045 15:56:44 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
49046 15:56:44 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 34 ERROR(S)!
49047 15:56:44 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49048 15:56:44 (0) ** MOF Registration: ''
49049 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49050 15:56:44 (0) ** MOF Registration: ''
49051 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49052 15:56:44 (0) ** MOF Registration: ''
49053 15:56:44 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49054 15:56:44 (0) ** MOF Registration: ''
49055 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49056 15:56:44 (0) ** MOF Registration: ''
49057 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49058 15:56:44 (0) ** MOF Registration: ''
49059 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49060 15:56:44 (0) ** MOF Registration: ''
49061 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49062 15:56:44 (0) ** MOF Registration: ''
49063 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49064 15:56:44 (0) ** MOF Registration: ''
49065 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49066 15:56:44 (0) ** MOF Registration: ''
49067 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49068 15:56:44 (0) ** MOF Registration: ''
49069 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49070 15:56:44 (0) ** MOF Registration: ''
49071 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49072 15:56:44 (0) ** MOF Registration: ''
49073 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49074 15:56:44 (0) ** MOF Registration: ''
49075 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49076 15:56:44 (0) ** MOF Registration: ''
49077 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49078 15:56:44 (0) ** MOF Registration: ''
49079 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49080 15:56:44 (0) ** MOF Registration: ''
49081 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49082 15:56:44 (0) ** MOF Registration: ''
49083 15:56:44 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49084 15:56:44 (0) ** MOF Registration: ''
49085 15:56:44 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49086 15:56:44 (0) ** MOF Registration: ''
49087 15:56:44 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49088 15:56:44 (0) ** MOF Registration: ''
49089 15:56:44 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49090 15:56:44 (0) ** MOF Registration: ''
49091 15:56:44 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49092 15:56:44 (0) ** MOF Registration: ''
49093 15:56:44 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49094 15:56:44 (0) ** MOF Registration: ''
49095 15:56:44 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49096 15:56:44 (0) ** MOF Registration: ''
49097 15:56:44 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49098 15:56:44 (0) ** MOF Registration: ''
49099 15:56:44 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49100 15:56:44 (0) ** MOF Registration: ''
49101 15:56:44 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49102 15:56:44 (0) ** MOF Registration: ''
49103 15:56:44 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49104 15:56:44 (0) ** MOF Registration: ''
49105 15:56:44 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49106 15:56:44 (0) ** MOF Registration: ''
49107 15:56:44 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49108 15:56:44 (0) ** MOF Registration: ''
49109 15:56:44 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49110 15:56:44 (0) ** MOF Registration: ''
49111 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49112 15:56:44 (0) ** MOF Registration: ''
49113 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49114 15:56:44 (0) ** MOF Registration: ''
49115 15:56:44 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
49116 15:56:44 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
49117 15:56:44 (0) ** You can refresh the WMI class provider buffer with the following command:
49118 15:56:44 (0) **
49119 15:56:44 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
49120 15:56:44 (0) **
49121 15:56:44 (0) ** WMI MOF representations: ............................................................................................ OK.
49122 15:56:44 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
49123 15:56:44 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
49124 15:56:44 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
49125 15:56:44 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
49126 15:56:44 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49127 15:56:44 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49128 15:56:44 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
49129 15:56:44 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49130 15:56:44 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49131 15:56:44 (0) **
49132 15:56:44 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
49133 15:56:44 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
49134 15:56:44 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
49135 15:56:44 (0) ** WMI static instances retrieved: ..................................................................................... 6304.
49136 15:56:44 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
49137 15:56:44 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 3.
49138 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49139 15:56:44 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
49140 15:56:44 (0) ** DCOM: ............................................................................................................. 0.
49141 15:56:44 (0) ** WINMGMT: .......................................................................................................... 0.
49142 15:56:44 (0) ** WMIADAPTER: ....................................................................................................... 0.
49143 15:56:44 (0) **
49144 15:56:44 (0) ** # of additional Event Log events AFTER WMIDiag execution:
49145 15:56:44 (0) ** DCOM: ............................................................................................................. 0.
49146 15:56:44 (0) ** WINMGMT: .......................................................................................................... 0.
49147 15:56:44 (0) ** WMIADAPTER: ....................................................................................................... 0.
49148 15:56:44 (0) **
49149 15:56:44 (0) ** 34 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
49150 15:56:44 (0) ** => This error is typically a WMI error. This WMI error is due to:
49151 15:56:44 (0) ** - a missing WMI class definition or object.
49152 15:56:44 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
49153 15:56:44 (0) ** You can correct the missing class definitions by:
49154 15:56:44 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
49155 15:56:44 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
49156 15:56:44 (0) ** (This list can be built on a similar and working WMI Windows installation)
49157 15:56:44 (0) ** The following command line must be used:
49158 15:56:44 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
49159 15:56:44 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
49160 15:56:44 (0) ** with WMI by starting the ADAP process.
49161 15:56:44 (0) ** - a WMI repository corruption.
49162 15:56:44 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
49163 15:56:44 (0) ** to validate the WMI repository operations.
49164 15:56:44 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
49165 15:56:44 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
49166 15:56:44 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
49167 15:56:44 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
49168 15:56:44 (0) ** the WMI repository must be reconstructed.
49169 15:56:44 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
49170 15:56:44 (0) ** otherwise some applications may fail after the reconstruction.
49171 15:56:44 (0) ** This can be achieved with the following command:
49172 15:56:44 (0) ** i.e. 'WMIDiag ShowMOFErrors'
49173 15:56:44 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
49174 15:56:44 (0) ** ALL fixes previously mentioned.
49175 15:56:44 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
49176 15:56:44 (0) **
49177 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49178 15:56:44 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
49179 15:56:44 (0) ** INFO: Unexpected registry key value:
49180 15:56:44 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
49181 15:56:44 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
49182 15:56:44 (0) ** From the command line, the registry configuration can be corrected with the following command:
49183 15:56:44 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
49184 15:56:44 (0) **
49185 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49186 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49187 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49188 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49189 15:56:44 (0) **
49190 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49191 15:56:44 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
49192 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49193 15:56:44 (0) **
49194 15:56:44 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\CONN.LOMBARD\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_SSCRDS02_2015.04.15_15.48.25.LOG' for details.
49195 15:56:44 (0) **
49196 15:56:44 (0) ** WMIDiag v2.1 ended on 15 April 2015 at 15:56 (W:110 E:41 S:1).
This seems to be the biggest problem:
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
This seems to be the second biggest error (and there are a few of them):
0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
I have tried:
winmgmt /resyncperf
winmgmt /verifyrepository
winmgmt /salvagerepository
winmgmt /resetrepository
I have also tried registering the mof files with
MOFCOMP <FileName.mof>
Lastly, I even disabled the WMI service, renamed the Repository folder, and had it rebuild the repository.
I got stuck on re registering the 'NT AUTHORITY\SYSTEM' (I think it is in the Components section in Administrative tools), as I could not find clear instructions on exactly how to go about it.
Chkdsk found no errors
Sfc /scannow found no errors
winmgmt /verifyrepository finds no errors.
I'm hoping someone here might be able to steer me in the right direction to get this resolved, as I do not want to rebuild a server that hosts a connection broker and has over 100 user profiles on it, as well as some very annoying and finniky LOB apps installed,
which will have to manually be reinstalled for each profile.Hi,
Here is a blog regarding how to fix WMI issue might be useful to you:
Fixing WMI issues Using Batch Script
http://social.technet.microsoft.com/wiki/contents/articles/6887.fixing-wmi-issues-using-batch-script.aspx
In addition, you mentioned Remote Desktop Servers are in a cluster setup, would you tell us how did you create the cluster?
As far as I know, with RD Connection Broker, we don’t need to create a cluster but just add multiple RD session hosts into one collection, then RD connection Broker would redirect sessions automatically.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Can't connect to gmail smtp server but receiving fine
I have been using gmail with my mac osx mail fine for several years with no hiccups. Recently, I had problems with gmail and my ipad but with an app, it's now working fine.
Today, when sending an email from my imac, I had the old error prompt show up asking for my password. Had a bad feeling about this. I entered it. Then again. Wouldn't take it.
Now it's telling me that my smtp server is offline. It works fine with webmail, so the gmail isn't the problem. I'm able to receive mail just fine and also send mail with other accounts.
I have tried rebullding my mail by letting it build a new index file and that didn't help. I read some advice about deleting the container folder. I don't have that folder on my imac. Can't locate it.
Can anyone please help? I hate using webmail and want to go back to using mac osx mail.
imac / 2.66 / 8gb RAM / 10.8.3
Thanks,
BobRobert Wilkins2 wrote:
Thanks for your reply Csound. I know that it's not right to solve my own post, but after thinking the problem was solved, I clicked resolved. I wanted to share my "solution" with the community. Sorry about bad form.
No bad form to worry about, just the reduced attention to your problem that a solved designation causes.
If I remove my gmail account, I'll be able to get all the emails back when I create my new one - because it's imap?
Yes, but check 2 things,
1. That it is setup as Imap (POP is possible but is not the default) and 2 that you have not created any local folders that house mail from the Imap account, if you did then you must export them before removing the account.
What do you mean by verify both passwords? You mean imap and smtp?
I assume I should be using the application specific password in my mail settings?
Thanks,
Bob
Imap and SMTP should be the same, but check.
Maybe you are looking for
-
Wireless Network printing dilema
I have a Photosmart 2525 All in One. I have Apple MacBooks/Ipads at home, and have just upgraded from ADSL broadband to cable broadband. The printer was previously ethernet cable connected into the ADSL modem, but now the printer and cable modem ar
-
hi! can anybody plz tell me how to do bdc for vk11 and vk12. the scene is that i have zpogram which displays the data and from there i have to add one button and whenever that button is triggred bdc had to be performed for vk11 and vk12 only for tho
-
Calendar is not moving to the cloud. How to fix?
Calendar tries to connect to my iCloud account but can not. After displaying "Moving calendars to server account..." for many many many minutes before displaying an error message. I thought I would simply turn off iCloud for Calendar in the system
-
How to read from 4 serial ports
Hi Does anyone know how to read from 4 COM ports with only 2 interupts? I can manage it by using Close serial driver.vi, however this makes the amount of allocated memory by Labview increase throughout my experiment and thereby slows down the compute
-
Is there a way to do this? I mean captions, titles, and the like that the editor has entered, not photo file-names or metadata. TIA