Letter of Credit consumption value and open value

Hi Friends,
I have created a Financial Document for my Letter of Credit (LC) value of Rs.1000.
I have assigned the same to the sales order for the value of Rs.800. So the available value in LC is Rs 200.
Next I create one more Sales order against this LC for Rs.400. This order went to block as the open LC value is not sufficient.
When I check the available value for the LC, it is still showing as Rs 200 and the consumed value as Rs 800. It is not considering the Rs 400 of the blocked sales order.
Question: Is this standard behaviour or are there some settings missing due to which the blocked sales order value is not being considered towards LC consumption. Is there anyway by which the blocked sales order value would also come under LC consumption.
Thanks & Regards,
Saji

As the Sales Order is blocked, its value will not be considered in LC's consumed value. This is pretty much standard.
I don't think is wouild be possible with Standard settings to include the Blocked Order Value in LC Consumed Value.
Hope this helps,
Thanks,
Jignesh Mehta

Similar Messages

Urgent! Display lookup value and return value at the same time.

We are using pop up lov.
How can we display lookup value and return value at the same time. let me claer..
Our lov query is like fallowing
select dname, deptno from dept
we want to return deptno column into a database bind text item and dname column into a display item (look up)
can we do it (we need to do)
thanks for your help.

We did it .
But pop up key lov (display description return value ) property doesn't appear for tabular forms item.
(Report Attributes pages Tabular Form Element section display As property list)
can we set or not.
Thank you.

Can anybody tell me how to extract sales value and cost value for an materi

dear all,
Can anybody tell me how to extract sales value and cost value for an material sold .
All the values of cost value and sale values are getting stored in bseg-wrbtr field .
How to identify them uniquely.
Or there is another way to find the sale and cost values.
Regards
Mave

Hi Mave!
Normally there is no condition change, when something is sold.
But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
Nevertheless, after selling you have a invoice document, where correct values should be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
Regards,
Christian

APC Value and Plan Value for an Asset.

HI Gurus,
I am developing a report where I have to display the APC value and Plan value of an Asset.Can anyone pls give an insight how to find this for the Asset.

Hi,
why don´t you use the logical database ADA which most of the FI-AA standard reports do? The logical database is a service to get this information without developing all the READ information and translation by yourself, especially when talking about mid-year-reporting, consistence checks, etc..
If you decide to use ADA, then the events GET ANLA0, GET ANLAV and GET ANLCV are from interest for you for information about APC and planned/posted depreciation value.
Regards,
Markus

Excise Value and Freight value should be add to material cost in the depot

Hi,
Can any one help me on my scenario?
We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot
Thanks & Regards
KMR

Hi All,
In Depot Sale. This are the Excise Duty Passed on to the Customer BED, AED ECS, SHECS, Other then that its added to the material cost. Define a Pricing procedure for value added to the material cost in both Procurement & Sales base your problem will be solved.
Regards,
Pherasath

ABAP program to neutralize 0Unit value and 0quantity value

Hi all,
I'm not expert in ABAP, and i would like implement a small abap program (routine)in my cube.
I would like neutralize the 0UNIT value and 0QUANTITY value only when 0VTYPE = 1 or 2 :
in other words, if 0vtype = 1 or 4 then 0unit = space and 0quantity = 0
b]
Can you tell me please how and where write the ABAP program please ?
Message was edited by:
Pontoise Pontoise
Message was edited by:
Pontoise Pontoise

Hi,
I amnt able to understand your requirement. But the code for which you asked is simple.
If 0vtype = 1 or 0vtype = ' '.
0unit = space.
0quantity = 0.
endif.
Regards
Aneesh.

Report on OA target value and net value

Hi all,
Is there any standard report that can list out the target value and net value of a number of OA? The values are similar to ME33K -> Header -> Statistics -> General. Thanks.

Thanks all. I had found the answer. It should be transaction ME3L, change layout to select "Released value" and mark the column to show total value.

Net value and assesable value

Dear Experts,
In Import pricing procedure we different pricing condition like
1.PACKING AND FORWARDING
2. SUPPLIER INSURANCE
3. OCCAN/ AIR FRIGHT CHARGES
4.IMPORT INSURANCE
5. LANDING CHARGES
to obtain NET VALUE which are pricing condiion value has to added
Please tell me what is difference between Net VALUE and ASSESABLE VALUE,
THIS

Hi,
Net value is basic material price with includes all delivery cost & fright.
Asseable value is
Basic price (% of material value) depent on product & chapter ID. (Custom will provide abetment for product)
Fright (Import)
Insurence cost
Landing cost 1%
SAM
Edited by: Saminathan Gopalan on Jun 9, 2010 4:19 PM

Integer values and decimal values in weblient UI - Display mode

Hello,
i have developed an custom assignmentblock with some custom fields.
Some of this fields are integer values and text values.
Some other fields are decimal values.
I face the issue that this decimal values are in display mode right-aligned all other fields are left-aligned.
In edit mode all values are right-alligned.
How can i change this behaviour? All values left-alligned in display mode!
Otherwise this looks strange.
Thank you
Kind regards
Manfred

Hi,
Decimal values will be displayed right-aligned. To change that you need to modify the GET_M method.
In get_m method, you have to change the attr datatype to string.
Data: attr type string.
Data: dref type ref to data.
Get reference of attr into dref.
Regards,
Arun
Edited by: Arun Kumar on May 14, 2010 3:03 PM

Posted values and unposted values

Hi,
Could anybody please tell me whats posted values and unposted values?
Thanks.

Hi Komalapriya,
I can imaging two scenarios where the word "posted/unposted value" makes sense.
1. If you have a master data value which is not being used in your transaction data, then this master data value in an unposted value.
2. If you have transaction data with empty characteristic values (which are shown as "#" in your reports), then these values could be named unposted values as well.
Kind regards,
Stefan

Standard report which can show the details of Invoice value and PO value

Hi all,
Is there any standard report which can show the details of Invoice value is more than 5% of PO value. MIRO value and PO value.
If any report which caters the maximum requirement is also fine
Regards
Sanjith
Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

Hi
Please refer the below mentioned link
/thread/1789934 [original link is broken]
Regards
Praveen P C

Differenct between Net Value and Document Value on a sales order

Can someone please explain what is the difference between the Net Value that we see on the sales order (VA03) and the 'Document Value' thats checked against in Dynamic credit checking?
Thanks

In transaction FD32, you maintain credit limit for customer and assign risk category for the customer.
In transaction OVA8, there are two main types of checks - Static or Dynamic.
System checks the following for arriving at customers credit status-
Static credit check - It compares the credit limit assigned to the customer to the total value of open sales orders, plus the total value of open deliveries not yet invoiced, plus the total value of open billing documents not yet passed on to accounting, plus the total value of billing documents that have been passed on to accounting, but which have not yet been paid by the customer.
Dynamic credit check - It compares customeru2019s credit limit to the total of open sales orders not yet delivered, plus the total value of open deliveries not yet invoiced, plus the total value of open billing documents not yet passed onto accounting, plus the total value of billing documents that have been passed onto accounting, but which have not yet been paid by the customer. In addition you can use Horizon functionality also.
You can perform additional checks in addition to dynamic or static credit check. One of them is document value check.
If you check this box then a additional credit check is done when the maximum document value assigned is exceeded. This is useful if business requires that all sales orders above a certain limit are to be blocked.
In your case, the document value is $0.00.
So system is not doing any additional credit check.
It would just do Dynamic or Static credit check with relevant assignment maintained in transaction FD32 for the said customer.

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

How to create a PDF with substituted key-value and table-values using a template language

I have about 50 key-values and 10 table-values that I want to substitute into a formatted report template (language can be anything standard, would create a small number of these templates) and then use an Adobe tool to substitute the values into the template and produce a PDF. Preferably the template language would permit some basic conditional logic (if <key #> has value <value> then <show key label here> and <key value here> in close spatial proximity on the form) and permit embedding of a static graphic logo, text with fonts/styles, etc. to produce a polished report but also handle pagination (e.g. enable page breaks or numbering) to be handled automatically.
What is a recommended template language and product to accomplish this?

Are you thinking of something like a blank form that you can enter information into, save, and send to another user? If so, what you want is possible. If you want more information, post again and include more details about how you want to use it and how the recipient will use it.

Modeling Question: Last Item value and First Value

Dear all,
I have the data coming in the following format:
Data Source:
HEAD1     1     21.01.2005
     2     21.01.2005
     3     21.01.2005
     4     21.01.2005
     5     23.01.2005
     6     21.01.2005
     7     21.01.2005
     8     21.01.2005
     9     21.01.2005
     10     25.01.2005 * ( I need this last Value)
HEAD2     1     26.01.2005 * ( I need 1st Value)
     2     28.01.2005
     3     28.01.2005
     4     28.01.2005
     5     28.01.2005 * (I need this last value)
HEAD2     1     29.01.2005 * (I need this 1st Value in the report)
     2     30.01.2005
     3     30.01.2005 * ( I need this last value in the report)
And I want in reporting as:
Reporting:
0) 00.00.0000 21.01.2005
1) 25.01.2005 26.01.2005
2) 28.01.2005 29.01.2005
3) 30.01.2005 00.00.0000
What can be my options?
I am not interested to use ABAP logic..
Is any last and first value aggregations can be helpfull??
Thanks for your time..
Regards,
Hari

Hi Aborgeld,
you can remove headers after writing the csv by using Get-Content $file | Select -skip 1 | Set-Content $file.
If null values are a problem for your SQL, this may work for you in your Select-Object call:
# Service Pack Filter-hash
$spf = @{
n = "osServicePack"
e = {
if ($_.osServicePack) { $_.osServicePack }
else { " " }
# Using it later in Select
Select-Object Name, lastLogonTimestamp, OSName, ParentContainerDN, osversion, $spf
Cheers,
Fred
There's no place like 127.0.0.1

Letter of Credit consumption value and open value

Similar Messages

Maybe you are looking for