Leveraging admin console user info for reports.
Is there a way to leverage the user information available from the admin console to generate reports?
Specifically, I'd like to be able to generate a report that lists the last login times for users.
The information is there, but requires you to look at each user profile individually.
It'd be real convenient to be able to export that type of info for all users accounts to a CSV file.
We've just set up Mobility service and, unfortunately, have a lot of accounts for former employees.
I'd like to avoid adding those users to mobility without having to check each-and-every account in the system.
curl -k --user gwadminassword https://10.10.10.10:9710/gwadmin-ser...lientLoginTime > login-report.csv
You could add additional attributes after the attrs=
Or if you want all attributes:
curl -k --user gwadminassword https://10.10.10.10:9710/gwadmin-service/list/user.csv > user-details.csv
--Morris
>>> gathagan<[email protected]> 3/12/2015 3:16 PM >>>
Is there a way to leverage the user information available from the admin
console to generate reports?
Specifically, I'd like to be able to generate a report that lists the
last login times for users.
The information is there, but requires you to look at each user profile
individually.
It'd be real convenient to be able to export that type of info for all
users accounts to a CSV file.
We've just set up Mobility service and, unfortunately, have a lot of
accounts for former employees.
I'd like to avoid adding those users to mobility without having to check
each-and-every account in the system.
gathagan
gathagan's Profile: https://forums.novell.com/member.php?userid=11060
View this thread: https://forums.novell.com/showthread.php?t=482367
Similar Messages
-
Hi experts,
How can i find user exits for report painters?
Is it possible to search them for specific an library? I am searchinf them for enchancing PEP elements rreport painters.
Thank you for your time,
Artur.No Reply, so I close.
-
Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do? Previously hit "organize", ran for 25 min till hit 100%, then "had to close"?
Unfortunately, there's not enough info listed to give you an effective answer.
Can you give more detailed system spec's. There are a lot of differences in RAM, & Hard Drive Technologies. Is your 2TB a single hard drive, or multiple drives in RAID? While a single 2TB drive is nice for the storage capacity, they also sacrifice some performance to reach that capacity... What speed is the RAM, & I'm assuming it's properly opperating in Dual Channel mode (watch your POST screen to be sure). Which Core i7 CPU are you running, & what Operating System are you running. Finally, bring up your task manager, & see what processes are using CPU cycles. Also, are you starting up PrE8 through the default shortcut which uses the Welcome screen?
A quick guess is that Auto Analyzer & the Welcome screen are behind your troubles, but can't be sure till more info is available.
There is a current thread about Auto Analyzer, & I've posted a way to bypass the Welcome screen in several threads.
See my post in this thread to bypass the Welcome screen http://forums.adobe.com/thread/516524 (2nd post in thread)
Message was edited by: chaosdsmFL - added link -
User-exit for report RPCAIDP0 (tcode: PC00_M19_CAID)
Dear Gurus,
Does anyone know user-exits for report RPCAIDP0 (tcode: PC00_M19_CAID) ?
Thank you in advance,
PSCDepends on what you want to do Priscilla, i have quite an experience with RPCAIDP0 report and it's not the easiest report to change the standard without copying to an customer report. Also, in the previous year, SAP changed the logic of the report quite a bit in order to have the same logic as in RPCIIDP0, so they created a class (CL_HR_PT_EMPLOYEE_TAX_DATA) in which they encapsulated all the data retrieval regarding payroll results, so it's not that dificult to enhance the class itself but it's a bit dificult to get the logic right away. I have done this for several clients, so if you can be more specific maybe i can help you.
Best regards. -
I want to be able to create directory user ID for the iPlanet administrators. They should be able to access the admin console and all the instances created. They should be able to configure each instance and directory. I was able tocreate Admin Server Administrators but they were only able to modify the directory(tab) and not the configurations(tab). Any help would be greatly appreciated!
Thanks.
KeithHi Keith,
In o=netscaperoot, edit the static group called cn=Configuration Administrators, ou=Groups, ou=TopologyManagement, o=NetscapeRoot - this group contains the admins peer to your config admin. Since the console is quirky and doesn't let you add in users not in netscaperoot, just click advanced and put in the full dn of whoever you want in by hand, e.g., uid=scarter, ou=people, dc=mydomain,dc=com as a static member. then rebind to the console with the full dn and passwd, and away you go :)
james -
Editing user info for existing user
I have a fresh installation of Arch i686 running with GNOME 2.22. I made a typo making the user account I use in my real name and I would like fix that. How can I edit my user info, i.e. not my username but my info?
Regards
AndréIn my case, trying to set my full name on my user account with
chfn -f <my name here>
gives the following:
chfn: Permission denied.
I went ahead and edited /etc/passwd, which got the job done.
I'm still curious to know why the real name / full name is not editable via chfn, though.
(I noticed this issue a long time ago, but didn't get sufficiently bothered by it until I used GNOME's Lock Screen function and discovered the Leave message dialog was saying "Leave a message for :", with nothing in place of the full name. Of course this isn't the most useful of features, but it's the principle of the thing...) -
Admin Console: upload filter for business_transaction_message
Hi.
We have a 7.0 system which has been upgraded from 5.0 (or maybe even earlier release). We find that all activities that are created are send to the R/3 adapter. But we have no intention to upload them. Therefore I want to ask if the only way to stop the middleware from sending them to the R/3 adapter is to implement a criteria filter in the admin console?
In earlier releases this ment that you had to delete all existing subscriptions and publications in all clients and also the replication object. You then had to re-create the replication object as an intelligent object adding the criteria fields needed (here the object_type). Then creating SOs and POs with the use of the new criteria.
Is that still the way to go or is there some easier/ smarter way dealing with this?
Thanks for you input!
Regards,
ThorstenMissed to restart the java stack... issue resolved.
-
Admin and User Accounts for Single User
I am the only user of my iMac. According to the article I found below, I should create a User Account for myself and use that one for my daily work. Is this correct?
"Don't use the administration account for anything other than setting up the machine and applications or changing "permanent" settings (if you want to, say, change network settings as a normal user you'll be prompted for the admin password, and since you'll do configuration changes less and less often as time progresses, this isn't a problem)."Aha! It would appear that this is exactly the sort of thing that using a non-admin account would normally protect you from.
..."yet all applications are available to me in Finder > Applications"...
That's good news. So I wonder where the "Applications" folder has been moved to... The folder that is opened when "Finder" is activated is something that can be changed through the "Finder" > "Preferences" menu under "General". I suspect that it is either "Home" or "Documents", so that when you refer to "Finder > Applications", the path is actually either "Macintosh HD" > "Users" > "Applications", or else "Macintosh HD" > "Users" > "Documents" > "Applications".
To put things back, it might be easier to temporarily remove any "Parental Controls" from your current account and check the "Allow user to administer this computer" check box.
Then rename the "Macintosh HD" > "Applications" folder (the one with only "iTunes") to something else, eg "Applications-temp". After that, open a second window and drag the folder you refer to as "Finder > Applications" to where it belongs in the "Macintosh HD" window.
Now check the versions of "iTunes.app" in the "Applications" and "Applications-temp" folder - one way to do this is to click on the iTunes icon once and change the "Finder" window to "Column View" ("View" > "As Columns", or use the keyboard shortcut ⌘3). The version number should be displayed in the "Preview" panel. Take the older version (lower version number), and throw it away. If necessary, drag the newer version into the "Macintosh HD" > "Applications" folder.
Now, open "Macintosh HD" > "Applications" > "Utilities" > "Disk Utility.app", select your hard drive, and click the "Repair Disk Permissions" button (not the "Repair Disk" button). This might take a few minutes.
Hopefully that will do it, and you can go back and make the account a non-admin again.
I should mention that with some third pary apps, if they were originally installed while the "Applications" folder had been moved, they may complain if their location is changed. It might be necessary to reinstall those, although it will likely depend on a case to case basis. -
BAPI With User Info For SalesOrder
Hi Guys,
I created one sales order how can i get the list of all users and also list of users who have access to particular sales orders.in VBAK there is one field ERNAM- name of the person who created the Object but i want this User detains contain in a BAPI. is there any such BAPI contains the user info. thanks in advance.
Thanks
Kiran.BIn my case, trying to set my full name on my user account with
chfn -f <my name here>
gives the following:
chfn: Permission denied.
I went ahead and edited /etc/passwd, which got the job done.
I'm still curious to know why the real name / full name is not editable via chfn, though.
(I noticed this issue a long time ago, but didn't get sufficiently bothered by it until I used GNOME's Lock Screen function and discovered the Leave message dialog was saying "Leave a message for :", with nothing in place of the full name. Of course this isn't the most useful of features, but it's the principle of the thing...) -
In more detail, i got the wifi and 3g ipad 2 and in the settings then cellur data, it says view account.
It say like name and stuff and i was wondering if i use my info for the top parts as in first name and last, telephone #, email and and rmail password since the credit card holder is my mom, not me. Anf then where it says credit card number and etc, i use my moms info or do i use jer info for the whole thing?
Sorry if this doesnt make sense :/It is real as you subscribed to it at https://www.mozilla.org/en-US/newsletter/ .
The recent newsletter is https://awesomeness.mozilla.org/pub/sf/FormLink?_ri_=X0Gzc2X%3DUQpglLjHJlTQTtQyTQ7yhQDvQ8NzcSQGQ2Qy5mVXMtX%3DUQpglLjHJlTQTtQyTQ7yhQCgQ8NzcSQzgQaQds8&_ei_=.
At bottom it says.
Thanks for Reading!
''You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below''.
Unsubscribe -
WLS 9.0: Admin Console User/Password
Hi,
I downloaded server900_solaris32.bin and ran it to install. After that, I started up the admin server from the samples directory:
/bea/weblogic90/samples/domains/wl_server/startWebLogic.sh
Then I tried to log into the Administration Console -- but realized I don't know what WLS_USER and WLS_PWD are.
Is there a default value? I wasn't prompted for anything during install nor during startup script execution.
Please advise.
Thanks,
Paulhi,
thing is that weblogic is the default user& weblogic is the default password....
if not you can edit the boot.properties file, that is available in the weblogic home directory, in that file you have both the username & password .
Yuvaraj.M -
Admin and user rights for change active airport
Hello alltogether,
my son has a new MacBook (System 10.5) for his school and he learn with the computer in all school-subjects. So I create two users, admin and one for him. After he has install all applications that he need for school, I gave the admin a password. Now my son can't install applications or change system settings. But i must give him admin rights, because when he stay at school, he must change the airport environment for school and if he stay at home he must change it back to home. Is it not possible to set the rights for a not admin user so, that he can change the airport environment?
Thanks for reading.
Regards,
TommyIf he needs admin status to use the wireless connection, then you need to make him an admin user. As far as I know, there is no partial admin configuration.
-
How to find out user info for a forecasted value
Hi Experts,
Suppose, a user plans on a planning application and consequently creates some forecast values. How do i find out which user did the planning? Is there any way to know this? Please let me know of this if anybody knows.
Regards
SwaroopHi, I'm using BPS so can't say forIP. But if you really want to see who posted which data, the planning application has to be set up that way in order to capture the user, time, date details, as indicated by the previous post. This will ptentially of course create very many more records in some cases, where data is amended.
But your post also requested info about who ran which planning functionality, and when. You can get this sort of information in BPS from the transactions BPS_STAT0 and BPS_STAT1. You may want to narrow the amount of analysis using the username/ date /time filters.
Stephen -
What's the best way to manage the user list for Reports on P6 web R8.2?
BI requires a separate users list from P6 EPPM. Any recommendations on this?
Welcome to the Apple Community.
iTunes is straight forward, just use the same ID on all of them.
What exactly do you want to see in messages on the Mac and iPad, messages combined from each of your phones or a different account just for both of you.
You should think about what you want in calendars, contacts etc, on your shared devices. -
DIAdem create an user variable for Report
Hi,
I know that i can display in a DIAdem report some pre-defined DIAdem vairiable (such as CurrDate) using @@Variable@@.
I would like to create a DIAdem user variable (from a DIAdem script) to be used in DIAdem report.
1) I have created a variable in my script
Dim myvariable
myvariable = "hello"
2) I have run the scirpt
3) I have put @@myvariable@@ in a Text
But a error message appears : Variable is undefined : 'myvariable'
How could a create a user varaible to be displayed in my report?
Thank
Solved!
Go to Solution.Hi malexman,
The other option is to create a global variable from a normal (non-user-command) VBScript. There are several ways to do this, but the one we instruct new users to implement is the "GlobalDim" command, like this:
GlobalDim "UserVariable"
UserVariable = "hello"
You will notice that after this short VBScript runs the "UserVariable" changes color to show that it has become a global variable-- at that point you can use it in REPORT (and everywhere else in DIAdem, thus the name "global" variable).
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Maybe you are looking for
-
How do you resolve Financial Management service validation error in EPM ?
Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report? Environment: Quad-Core AMD Processor 2.2 GHz (Server Machine) 5 GB RAM Server 2003 Standard 32-Bit SP2 (also tried in Enterprise) Application Se
-
Adobe Reader 9.3 Update, DELL Monitor Issue, Comes up as Mobile PC
Hi Folks, I have currently discovered a bug in the Adobe Reader 9.3 Update released on 1/12/2010 where in a multi-monitor environment one of the monitors or sometimes multiple monitors come up as a Moblie Display. I have seen this happen when the upd
-
Logic Required in HR ABAP Program
Hi, First i have to check the Change Date on Infotype 0000 Actions infotype (P0000-AEDTM). If the change date falls within the Period Selection date specified then i have to include the employee in the report. the included fields are: P0000-AEDTM,P0
-
When I tried to use Firefox this morning I got this message with exclamation marks. "SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give u
-
Mac will not eject a disk. What do I do?
I inserted a CD-R to see what was on it- pictures, music, etc. First , the mac takes forever to load the disk onto the screen in the upper right hand corner. Once it pops up, it will not load, I get the beachball of death and it has not ejected it