BAPI With User Info For SalesOrder

Hi Guys,
I created one sales order how can i get the list of all users and also list of users who have access to particular sales orders.in VBAK there is one field ERNAM- name of the person who created the Object but i want this User detains contain in a BAPI. is there any such BAPI contains the user info. thanks in advance.
Thanks
Kiran.B

In my case, trying to set my full name on my user account with
chfn -f <my name here>
gives the following:
chfn: Permission denied.
I went ahead and edited /etc/passwd, which got the job done.
I'm still curious to know why the real name / full name is not editable via chfn, though.
(I noticed this issue a long time ago, but didn't get sufficiently bothered by it until I used GNOME's Lock Screen function and discovered the Leave message dialog was saying "Leave a message for :", with nothing in place of the full name. Of course this isn't the most useful of features, but it's the principle of the thing...)

Similar Messages

[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.

Post Author: LeeCUK
CA Forum: Authentication
I have installed Enterprise XIR2 onto a Windows 2003 server and all services are running.I have installed the client on another windows 2003 server and I can connect to the console via the web.
Firstly desktop intel would not work and gave me the error below, however a new entry appeared in my server dropdown with servername (.Net Portal) and after selecting this Desktop intell worked.
When I try to run designer I dont get the extra server in the dropdown nor does it connect when tryped manually and gives me the same error I was getting for desktop intel.
Im using enterprise authentication
Has anyone figured this out please?
The error im getting is below[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(hr=#0x80042a01)

Post Author: jsanzone
CA Forum: Authentication
LeeCUK:
The [repo_proxy 13] error seems to be a catch-all for BO in that I've worked with this software (XI R2) for 1 1/2 years now and each time I've encountered [repo_proxy 13] it has been for a different reason, thus, you're going to have to apply troubleshooting checks all over the place until you find the problem. In my particular case I just resolved my [repo_proxy 13] error I've been working on this week, and here was my scenario. Our server in the lab died due to a hard drive failure, so we cut our losses and installed a new & more powerful server. When the rebuild was done I could not connect from my laptop to the repository via Designer (good old [repo_proxy 13] error). After much angst, etc, etc I found out that the servers in the CMC (/businessobjects/enterprise115/admin/en/admin.cwrwere">http://<server>/businessobjects/enterprise115/admin/en/admin.cwrwere) were all down except for one (even though CCM showed all servers "up"). When I went to start the servers in the CMC I was prompted for an account, and no matter what account I tried it won't work. So I went back to the CCM servers and stopped them all, then changed the default account it was using from LocalSystem to the administrator account, restarted all servers in CCM, went back to CMC and noted that all servers were now up as well. Then I went back to my laptop and used Designer and was able to successfully log in. Thus, the end of my story, however, it seems that many [repo_proxy 13] errors have different beginning and endings. For instance, a year ago I had the same [repo_proxy 13] error and brought it to BO tech support. They determined that I had to uninstall my client from my laptop, clean out the registry for any references to BO keys, and remove the c:\program files \Business Objects folder, then reinstall, and sure enough it worked in that case, but not in this case when I tried it again. By digging deeper I found out the root cause to my current problem, and voila, I'm in!
Good luck!

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac?

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac? I've used the Windows e mail Inbox folders for an easy access filing cabinet for years, as this all goes out on e mail. Thanks for assisting me!

I think the easiest way would be to use Migration Assistant to get all that over...
http://support.apple.com/kb/HT2518
http://support.apple.com/kb/DL1415

BAPI or USER EXIT for MIRO: Change PO reference amount (on-line)

Hi, I need to find a BAPI or USER EXIT for TX MIRO to change/modify the PO reference amount for the selected positions (using the given checkbox) just after selecting them (when pressing ENTER). Any ideas? Thanks.

Hello Suman,
Please follow this steps to get the list of Userexits for the TCODE MIRO read there short description to get the appropriate EXIT.
Steps.
1. Goto the Tcode
2. System-> Status.
3. Copy the program name, find the package for the program.
4. Go to SMOD (tccode) press F4 -> Click on "Information System" Push Button->
Enter the Package name-> and press the enter button.
5. Now you get the list of Userexits. Need to select one by looking into its short description.
Hope this solves your issue,
Cheers,
Suvendu

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do?

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do? Previously hit "organize", ran for 25 min till hit 100%, then "had to close"?

Unfortunately, there's not enough info listed to give you an effective answer.
Can you give more detailed system spec's. There are a lot of differences in RAM, & Hard Drive Technologies. Is your 2TB a single hard drive, or multiple drives in RAID? While a single 2TB drive is nice for the storage capacity, they also sacrifice some performance to reach that capacity... What speed is the RAM, & I'm assuming it's properly opperating in Dual Channel mode (watch your POST screen to be sure). Which Core i7 CPU are you running, & what Operating System are you running. Finally, bring up your task manager, & see what processes are using CPU cycles. Also, are you starting up PrE8 through the default shortcut which uses the Welcome screen?
A quick guess is that Auto Analyzer & the Welcome screen are behind your troubles, but can't be sure till more info is available.
There is a current thread about Auto Analyzer, & I've posted a way to bypass the Welcome screen in several threads.
See my post in this thread to bypass the Welcome screen http://forums.adobe.com/thread/516524 (2nd post in thread)
Message was edited by: chaosdsmFL - added link

To provide financial data with segment info for Statutory consolidation

Hello.
I'd like to know which is the better solution in order to provide company P/L and B/S data with segment info for Statutory consolidation purpose like SEM-BCS or BO-Finance.
(Segment info means like business division for disclosing)
Sometimes PCA accounting info is used and roll-up into FI-SL.
(FI posts Profit center directly or allocates into segment for consolidation)
Do you have any other way to provide financial data with segment from FI?
New GL is good solution??
Please kindly help.
Thanks,
SEM_BW

Hi
Development of New GL and Document splitting is based on to provide the solution for segment reporting to meet the local legal requirements and also to meet company aspirations. Create n number of segments for n number of business requirements.
Cheers
Srinivas

SessionFacade::openSessionLogon with user info has failed

Post Author: kpit
CA Forum: Authentication
I cannot logon to system from my client applicaitons...DeskI and Designer using 2 tier mode. However, I can logon to system using 3 tier mode.
Does anyone knows anything about this issue? I have reinstalled BOE XI R2 SP2 with FP 2.6 and reinstalled my client applications as well, but still have this issue.
Error Message: [repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(CMS host 'KTAZD429' cannot be found on the network. Please verify the name and that network name resolution is working properly.(hr=#0x80040801)

Post Author: jsanzone
CA Forum: Authentication
kpit,
The good ol' "repo_proxy 13" error has reared its ugly head at you, huh?
In my experience "repo_proxy 13" can be caused by one of several symptoms, so it's going to be a case of try this or try that before you get it resolved. My last experience with "repo_proxy 13" was that I had a server running on a stand-alone network with no DNS, Firewall, or connection to the outside Internet (basically a lab), and when I brought other workstations/laptops in and try to connect, the "repo_proxy 13" would appear. I finally resolved this by hard-coding the IP address on all machines under the 192.168.1.xxx subnet, and voila, the problem went away. Now this may not apply in your situation, but it might. Just some thoughts, but no guarantees on resolution.

Editing user info for existing user

I have a fresh installation of Arch i686 running with GNOME 2.22. I made a typo making the user account I use in my real name and I would like fix that. How can I edit my user info, i.e. not my username but my info?
Regards
André

In my case, trying to set my full name on my user account with
chfn -f <my name here>
gives the following:
chfn: Permission denied.
I went ahead and edited /etc/passwd, which got the job done.
I'm still curious to know why the real name / full name is not editable via chfn, though.
(I noticed this issue a long time ago, but didn't get sufficiently bothered by it until I used GNOME's Lock Screen function and discovered the Leave message dialog was saying "Leave a message for :", with nothing in place of the full name. Of course this isn't the most useful of features, but it's the principle of the thing...)

Finding user exit for salesorder

Hi,
In Transaction VA02, in item details ,
in additional detailsB tab: If Goods in kind item is checked and
in Account assignment tab:If order is blank ,
then it should popup an error message to enter the order number.
If both the fields are filled then the order should get saved.
For the above requirement which userexit is suitable.
Please help me out.
Thanks in advance,
sravanthi

Hi,
Search for the sample program to find the user exist for the std transaction codes.
Copy the below program and execute it by giving the tcode VA02
REPORT Z_SAMPLE_87.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
WRITE: 'sy ucom=', SY-UCOMM.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Padmasri.

Leveraging admin console user info for reports.

Is there a way to leverage the user information available from the admin console to generate reports?
Specifically, I'd like to be able to generate a report that lists the last login times for users.
The information is there, but requires you to look at each user profile individually.
It'd be real convenient to be able to export that type of info for all users accounts to a CSV file.
We've just set up Mobility service and, unfortunately, have a lot of accounts for former employees.
I'd like to avoid adding those users to mobility without having to check each-and-every account in the system.

curl -k --user gwadminassword https://10.10.10.10:9710/gwadmin-ser...lientLoginTime > login-report.csv
You could add additional attributes after the attrs=
Or if you want all attributes:
curl -k --user gwadminassword https://10.10.10.10:9710/gwadmin-service/list/user.csv > user-details.csv
--Morris
>>> gathagan<[email protected]> 3/12/2015 3:16 PM >>>
Is there a way to leverage the user information available from the admin
console to generate reports?
Specifically, I'd like to be able to generate a report that lists the
last login times for users.
The information is there, but requires you to look at each user profile
individually.
It'd be real convenient to be able to export that type of info for all
users accounts to a CSV file.
We've just set up Mobility service and, unfortunately, have a lot of
accounts for former employees.
I'd like to avoid adding those users to mobility without having to check
each-and-every account in the system.
gathagan
gathagan's Profile: https://forums.novell.com/member.php?userid=11060
View this thread: https://forums.novell.com/showthread.php?t=482367

Just got the iPad and in the cellur data, do i put the credit card users info for everuthinf for only the bottem?, Just got the iPad and in the cellur data, do i put the credit card users info for everuthinf for only the bottem?

In more detail, i got the wifi and 3g ipad 2 and in the settings then cellur data, it says view account.
It say like name and stuff and i was wondering if i use my info for the top parts as in first name and last, telephone #, email and and rmail password since the credit card holder is my mom, not me. Anf then where it says credit card number and etc, i use my moms info or do i use jer info for the whole thing?
Sorry if this doesnt make sense :/

It is real as you subscribed to it at https://www.mozilla.org/en-US/newsletter/ .
The recent newsletter is https://awesomeness.mozilla.org/pub/sf/FormLink?_ri_=X0Gzc2X%3DUQpglLjHJlTQTtQyTQ7yhQDvQ8NzcSQGQ2Qy5mVXMtX%3DUQpglLjHJlTQTtQyTQ7yhQCgQ8NzcSQzgQaQds8&_ei_=.
At bottom it says.
Thanks for Reading!
''You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below''.
Unsubscribe

BAPI/FM/User exit for F-27

Hi All,
I am looking for a either a BAPI/FM or a user exit which is similar to tcode F-27. The reason being is i want to run this tcode in background.
I have been looking around in SDN but did not find any helpful posts for F-27. Anyone out there has any idea or workaround that would really be helpful. Or is it possible for me to create a custom function module to achieve the same?
Thanks in advance,
Karuna.

Hi,
Thank you very much. I am trying to use it. this is how i am using:
DATA:   ZFISCAL_PERIOD TYPE BAPI0002_4-FISCAL_PERIOD.
data:     obj_type like bapiache02-obj_type,
           obj_key like bapiache02-obj_key,
        obj_sys like bapiache02-obj_sys,
        documentheader like bapiache09,
        accountgl like bapiacgl09 occurs 0 with header line,
        currencyamount like bapiaccr09 occurs 0 with header line,
        return like bapiret2 occurs 0 with header line,
        extension1 like bapiextc occurs 0 with header line.
        documentheader-username = sy-uname.
        documentheader-header_txt = 'Test using BAPI'.
        documentheader-comp_code = '0010'.
        documentheader-doc_date = sy-datum.
        documentheader-pstng_date = sy-datum.
        documentheader-doc_type = 'DG'.
        documentheader-ref_doc_no = 'Test using BAPI'.
        documentheader-BUS_ACT = 'RFBU'.
        documentheader-FISC_YEAR = '2009'.
        documentheader-FIS_PERIOD = ZFISCAL_PERIOD.
        currencyamount-itemno_acc = '1'.
        currencyamount-currency = 'USD'.
        currencyamount-amt_doccur = '101.00'.
        append currencyamount.
        currencyamount-itemno_acc = '2'.
        currencyamount-currency = 'USD'.
        currencyamount-amt_doccur = '-101.00'.
        append currencyamount.
        CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
          EXPORTING
            DOCUMENTHEADER          = documentheader
          CUSTOMERCPD             =
          CONTRACTHEADER          =
        IMPORTING
          OBJ_TYPE                =
          OBJ_KEY                 =
          OBJ_SYS                 =
          TABLES
          ACCOUNTGL               = accountgl
          ACCOUNTRECEIVABLE       =
          ACCOUNTPAYABLE          =
          ACCOUNTTAX              =
            CURRENCYAMOUNT = currencyamount
          CRITERIA                   =
          VALUEFIELD              =
          EXTENSION1              =
            RETURN                     = return
          PAYMENTCARD         =
          CONTRACTITEM         =
          EXTENSION2              =
          REALESTATE             =
          ACCOUNTWT              =
          if sy-subrc = 0.
              WRITE 'SUCESS'.
          else.
             write 'NOT SUCCESS'.
          endif.
When i am executing this i am getting 2 errors in RETURN:
1. Error in document: BKPFF $ ESRCLNT200
2. FI/CO interface: Inconsistent FI/CO document header data for updating
Can you please help me, if i am missing anything?
Thanks,
Karuna.

Migrating Forms with User-Info to Apex

Hi,
i am using forms with CLIENTINFO-Bean (javabean running in forms9), to save who (OS-Username, e.g. windows user), where (workstation-name and ip-address) modified records.
I wonder if its possible to get similar functionality within apex? I assume this cannot be achived with javascript - just with a java app?
any help would be appreciated. i would really like to migrate this app to apex...
kind regards
Günther

Hello Günther,
If relevant you could dive into [NTLM Aiuthentication|http://jastraub.blogspot.com/2008/03/ntlm-http-authentication-and.html].
APEX is a browser app and can even run on a mobile phone, and there is no os-user on an iPhone I guess.
In a IE environment you can get the username using an ActiveX object, but a user has to accept running such an object...
You could also go for an SSO / LDAP solution so your :APP_USER = OS Login.
I'm afraid it won't get better than that....
Greetings,
Roel
http://roelhartman.blogspot.com/

How to find out user info for a forecasted value

Hi Experts,
Suppose, a user plans on a planning application and consequently creates some forecast values. How do i find out which user did the planning? Is there any way to know this? Please let me know of this if anybody knows.
Regards
Swaroop

Hi, I'm using BPS so can't say forIP. But if you really want to see who posted which data, the planning application has to be set up that way in order to capture the user, time, date details, as indicated by the previous post. This will ptentially of course create very many more records in some cases, where data is amended.
But your post also requested info about who ran which planning functionality, and when. You can get this sort of information in BPS from the transactions BPS_STAT0 and BPS_STAT1. You may want to narrow the amount of analysis using the username/ date /time filters.
Stephen

Report with customer info for an Sales Order with batch details

Hi
Can any one please tell me the SAP REPORT with contains data of customers were shipped a specific product (material number) by batch number. report with the name and address of the customer, the sales order number and the number of products that were shipped.
Thanks
Nick

Hi nick,
See if anybody has worked on SIS (sales information system) in your team.
He can help you out to create one info structure , by selecting desired characteristics, key figure with respective update rules. though its require lot of configuration but you can make it without abap development.
(I couldn"t make it in time to provide you detailed configuration but below given path will take you to the configuration area )
IMG - LG -Logistick information system -logistick data werhouse- data basis- field catalogue.
IMG - LG -Logistick information system -logistick data werhouse- data basis -
infostructure.
IMG - LG -Logistick information system -logistick data werhouse- data basis - updating - update defination & update rules.
( MC18, MC21, MC24,& MC30)this transaction help to create field catelogue, info system, update rule & generation log respectively.
karnesh

BAPI With User Info For SalesOrder

Similar Messages

Maybe you are looking for