Lexmark printer x1150 does not print

Hi, i recently got a new macbook. When i try to print the computer recognizes the printer as a lexmark x1100 (my printer is a lexmark x1150), however if i press print, the computer tells me that the printer is not responding. I downloaded the driver and it still does not work. The funny part is that when i did a test-print to calibrate my cartriges, the printer actually worked, but when is a picture or a word documents it does not work. when i scan it also works, so th only problem is when i print.
Thanks

The Lexmark driver for that printer is not a universal binary. In order to install it you must force the Printer Setup Utility to open in Rosetta. Select the PSU icon then press COMMAND-I to open the Get Info window. You will see a checkbox labeled "Open in Rosetta." Check the box and close the window. Now run PSU and you should be able to install the driver properly.
As a precaution I suggest that before the above you open PSU and reset the printing system to clear the caches and remove any improperly installed driver.

Similar Messages

Print range does not print the last page in the range.

Adobe Reader for New IPAD - The print range function does not print the last page in the range. For example, if you enter a print range of 2-18, pages 2-17 print and page 18 does not print. Also, if you enter a print range of 9-9, page 8 prints and page 9 does not print.

I have the Epson 4540 printer. I don't know for sure if it connects via AirPrint. I didn't do any thing to set up Air Print. The printer is attached directly to my network router and it shows up IPad apps. I have not printed docs from other apps, but I will give it try and let you know.
Christopher J. Bilcz
[email protected]

HP Photosmart Plus e-All-in-One Printer B210e Does Not Print Through Wireless

I am using Mac OS X 10.7.3 on a wireless connection. I went to print, HP Utility gave me the following error message:
The printer may not exist or is unavailable at this time
It was not being used by anything else at the time. Then 2-3 minutes after I got that first error message HP Utility gave me another error message:
The printer is not responding
Then on the printer touch screen display I touched the wireless icon, chose Run Wireless Network Test, and got an error message:
Load paper into Main Tray.
The tray had plain white paper (10-15 sheets) in a nice neat stack as far back as it would go. I took the stack just to be sure it was still in a neat stack and put it in as far as it would go and pressed OK on the touch screen display and I still got the same message. Then I decide to turn the printer off using the power button, waited about a minute, and then pressed the power button to turn it on. When I did I got another error message:
Improper Shutdown
To avoid damage, use On button to shut down. Do not unplug the power cord or turn off the power outlet to shut down the device.
How is that an improper shutdown when I did use the power button to turn it off. Why is it telling me that I need to use the power button to turn it off then back on when I did use the power button to do that. What is the issue and how do I fix it. I did not have this issue with Mac OS X 10.7.2, but I do now agter the 10.7.3 update. As of right now the only way I can print from Mac OS X is using a USB connection. I can print through a wireless connection using my Windows 7 partition on the same MacBook. I am starting to think that this printer is not Mac OS X 10.7 Lion compatible.
I have a Time Capsule (3rd Generation) with the current firmware for it and the current the current AirPort Utility for Mac OS X installed.

SthrnDixieCowgirl wrote:
I don't know how to remove and add printers unless I had to format my hard drive for a completely different reason and reinstalled the printer that way.
To remove the printer, open System Preferences > Print & Scan. You will see the HP in the Printers list. Click on it once to select it and then press the minus button under the Printers list to remove it.
With this done, click the plus button under the Printers list to add the printer. With the Add Printer window open and the Default view selected, the HP should appear in this view. Select it and the Print Using menu should change to the supporting printer driver. When this happens, click the Add button to complete the creation of the printer queue.
SthrnDixieCowgirl wrote:
I have heard other people have issues with 10.7.3 for other reasons and I should have waited until 10.7.4 came out before updating and I didn't and now there is nothing I can do to go back to 10.7.2
You cannot believe everything you read. For every person that had a problem after installing the .3 update, a hundred more had no problem.
But if you wanted to go back to 10.7.2, then you can use Time Machine to do this. If you are not using Time Machine then you need to start doing so. At least the update only stopped you from network printing. What if it had stopped you from using the Mac?

I can't print from firefox. The paper feeds throught the printer but does not print. The same web pages will print when I use internet explorer. And the printer works fine with word, excell etc, just not with firefox.

Whenever I try to print any page opened in firefox it will not print. The paper feeds through the computer, but does not pring.

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

New macbook pro connects to HP psc printer but does not print

Hi,
I have just got the new macbook pro model A5102 and i have followed the instructions on the HP website to install my HP psc 1317 all- in-one printer. I am using a USB connection, and I have followed the instructions, turning on printer, connecting via usb, checking for software updates. The printer queue is automatically made, and i go to printer and scanners and it is there in the list. I then go to print and nothing appears in the queue. I disconnect the printer and it goes offline so the connection via usb is working, its just not printing. I have also restarted the laptop and I have deleted and re-installed printer several times. I don't know if I am missing something out, so can somebody please help. Ive been to the HP website as I assumed I needed to download a driver but it does not give me the option.
Thanks,
Meera

Hey ! I have the same problem with my HP PSC series, it finds my printer, I can print the stuff and my printer progress even says "Printing page ....", but just nothing comes out of my printer ...
My parents and sister all have an own laptop which is WIndows and they can all print with that USB cable.
I

Captivate 8 print widget does not print in landscape; prints full resolution of project and not just the certificate?

I am new to Captivate and am tasked with learning how to use Captivate 8. I need to add a certificate of completion to the end of my project and have many questions for which I cannot find any answers! Please, if anyone can answer these:
1) I do not want the certificate to be printed until the score of the quiz reaches a specific minimum - for example, you need a score of 80% or better to print a certificate. How do I do this with the print widget?
2) I want the certificate to print out without the slide background and without the project's resolution - in other words, I only want the certificate image (with added text box for name) to print, IN LANDSCAPE, without the user having to make all the adjustments on their end (choosing landscape over portrait with their printer). How is this accomplised?
3) I want a date entered on the certificate - how do I add this specific element?
Without a certificate widget and the use of Flash with this version, I am confused as to how exactly Captivate provides the ability to print certificates? I do not know HTML5, and am spotty with Javascript. Why would a feature such as certificates and the ability to print them be such a clandestine thing? No tutorials, no clear advice on how exactly to achieve this widely popular feature of training material development. Seems to me that it should be MUCH easier to accomplish, but I'm stumped at this point.

The solution I found is this:
Don't use the print widget in Captivate 8. It simply does not work the way it should be able to work. Unless you are capable of scripting in Actionscript 2.0 and have access to an older version of Captivate, there is no way to get around this bug.
The problem I discovered is that Captivate 8 will only allow you to use Actionscript 3.0 in Flash; you can open the widget in Flash, but you MUST open it through Captivate first if you intend to use it in Captivate. So, once you open the widget for adjustments through Captivate, it automatically chooses AS 3.0 as the scripting language to use, no other choice is available. IF you have Captivate 7 or lower, however, it allows you to script in AS 2.0. I do not, so I cannot assist you in scripting the widget.
What I ended up doing was, I made my own certifcate in Photoshop, saved it as a .PNG, and added it to the last page. Using the internal coding of Captivate I told the program to only go to that slide upon success of the quiz.
To Print: go to Window > Skin Editor. On the left are check boxes for playbar choices - check off 'Show Playback Control,' and then choose your theme. From the dropdown, choose "print." If you don't want anything else on the playbar, then check those items off; Choose where you want the playbar to show (I chose bottom and bottom center). See below:
You can see the icons on the bottom, in the center. The icon to the left is the Print button. This works well, though you may have to make print choices from your local print dialog. I have to tell it to print landscape, for instance, otherwise it prints portait and too small. But this does work, and it solves the issue of non-working print widgets.

HP Officejet 4500, problem with printer. Does not print and no files to be printed in the que

Hp all in one printer I send documents to be printer, but nothing will appear in the "see whats printung menu. This usually happens when I try to print from incoming documents/menus. Most print jobs from Word when from my own computer will print, but not from outside sources. Help

Hello,
Are you trying to print those external documents also from Word or different application. If different application, please ensure before clicking the print command correct printer icon is selected.
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

System (AGE3) 'Customer Aging Report' does not print BP Ref. No.

Hi Experts!
I have a question about the PLD for the Customer Aging Report (AGE3 = Collection Report). This system print layout does not print the BP Ref. No. in that field.
And when I went into the PLD, that field (and the other repetitive fields) are text fields. How do I get the BP Ref. No. to print in the field?
Any help would be greatly appreciated.
Marli

Hi Marli,
If the PLD is of System report , then you have to heck that in ocrd table what is the field name of BP ref no. and try to convert that text field into database field and give the ref of ocrd BP ref no.
However the chnces of working fine for the above sol. is very low as we will not prefer to change the system report.
You should go for QLD or Crystal report for that .
Rgds,
Premraj

MY printer officejet7000 DOES NOT PRINT FULL A3 SIZE PAPER LIKE my prin cut for botam

MY printer officejet7000 DOES NOT PRINT FULL A3 SIZE PAPER my print cut for botam & top side, Same printout give in my old model printer like k7108 this printer printour full printing, but I newly purchase printer not printour full a3 size print

Those '''user_pref("print.printer_Artisan_837 ....''' preferences are what needs to be deleted, with Firefox closed.
I think that "ding-dong" error sound might be due to an old print job stuck in the print cache, though. Open the Windows Control Panel > Printers and Faxes and check the '''Status''' for that printer.

How do I print from a printer that does not support airprint?

I have an ipad and would like to print photographs and e-mails from it via my Lexmark Pro901 wireless printer which does not seem to support Airprint, Can anyone help please?

Lexmark has an app I believe.
Or you can look into third party apps. I use Print n Share, but i also see print central and printopia recommended

HP Photosmart 6510 e-All-in-One Printer Does Not Print Black Ink

I have run all the troubleshooting listed from HP and the "check" warrenty doesn't come up blank. I would like to not have to purchase a new printer to fix this any help would be greatly appreciated:
1) Rebooted Printer
2) Installed new printer cartridge (2nd one) - really not happy about this as that represents almost $50 in HP ink
3) Checked venting - Not the problem
4) From Tools ran head cleaner - still only prints colors (or grey)
I've liked HP printers for a long time, but after reading the forums I'm really seeing an issue with the model I puchased. I don't mind purchasing HP ink and my printer isn't a high volume use printer so I expect it to last beyond 1 year 1 day.
I have the SN and product number available if a tech needs.
Chris

Hi @crfldf
Have you completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
If I hear back from you and you require further assistance, I will send you a private message to gather some information. If I send you a message, you can click the little envelope on the top right hand corner of the forums page to check the message;
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

Wireless All-in One receives scan and ink level but does not print

My wireless printer was working fine, now it can scan and send scan to my computer, my computer receives ink levels in the utility. Now it will not print from Word or other programs that I was able to print. When I restart the computer with a document in the printer queue, when it gets to my desktop screen, it prints. But still will not print from Word unless I do the restart again. I have restarted the printer(which works with other computers in the house) and even deleted and reloaded the HP program. My computer receives but does not print. I even tried direct usb connection

Hi raavindra,
Welcome to the HP Forums.
I see that you are having some issues when attempting to do a scan or a copy.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

AR aging report does not print alphabetically by customer name in 8.8

AR aging report does not print alphabetically by customer name in version 8.8.
It is possible to create a custom layout for the receivables aging summary report (to print alphabetically by BP name) to overcome this problem. However, itu2019s not possible for the u201Cdetailed receivables aging reportu201D or u201Ccustomer statement reportu201D.
Why has SAP changed this functionality? In version 2007 SAP takes the order of the rows set on the screen unless other order is specified in the layout.
How can we make the u201Cdetailed receivables aging reportu201D and u201Ccustomer statement reportu201D print alphabetically by customer name?
Steps to reproduce:
Business partners > Business partner reports > Aging > customer receivables aging
Doubleclick on customer name to sort it in alphabetical order.
Click on preview and select u201Creceivables aging summary reportu201D.
The system layouts do not print by customer name in alphabetical order.
Click on preview and select u201Cdetailed receivables aging reportu201D. The system layouts do not print by customer name in alphabetical order.
Also, customer statement report does not print by customer name in alphabetical order.
In SAP 2007 versions, when a marketing document or aging report is printed, SAP takes the order of the rows set on the screen unless other order is specified in the layout.
In SAP 8.8 although it works the same way for marketing documents, it doesnu2019t work like this for Aging reports.
I was able to change the order for the u201CReceivables Aging Summary Reportu201D only. We cannot overwrite a System report, I had to create a new layout called: u201CBusiness Partner Aging (Summary) (Alphabetically Sorted)u201D.
I couldnu2019t set up the order based on BP Name for the other 2 options: Detailed Receivables Aging Report and Customer Statement Report (One page per Customer).
Iu2019ve checked print settings and properties, and I donu2019t see any way of changing the default order for these reports.

Reported it to SAP support + they plan to fix it in a future patch.

Lexmark printer x1150 does not print

Similar Messages

Maybe you are looking for