Librfc32.dll error

Dear Experts,
As per note 1032461 i downloaded and copied the file, But RFC is still showing error. While executed the command "find "LIBRFC" librfc32.dll" and getting the below error.
As above said in Note:1447900, i cannot find the below files from support portal.
Solution
Apply the librfc 7.20 patches level 11 for Windows platforms:
librfc32.dll 7.20 with file version 7200.1.73.6735 or higher
librfc32u.dll 7.20 with file version 7200.1.73.6735 or higher

Brandon,
My OS is X64 Unicode, i downloaded and copied the below file and it is the latest.
As per Note:1447900, I needed the:
librfc32.dll 7.20 with file version 7200.1.73.6735 or higher
librfc32u.dll 7.20 with file version 7200.1.73.6735 or higher

Similar Messages

LIBRFC32.DLL not Found Error

We have installed Data Services 3.2 on a VM running Windows Server 2003 Standard x64 Edition SP2. We are testing an SAP Applications datastore, but when we try to extract data from the SAP system, we get this error:
NT RFC DLL <LIBRFC32.DLL> not found.
I have verified that this file exists in the DS bin folder.
Has anyone encountered this? Could this have something to do with the 64-bit OS?
Thanks

Hi Paul,
In a 64 bits server, you have to add that file in c:\windows\syswow64 instead of system32.
Also, it helps if you install the sapgui in the DS server (not mandatory but recommended).
Cheers,
Diego

Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)

Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)
Hi!
We would like to hold the account balance data from EMPTOR to SAP and have the following error:
Unable to load DLL 'librfc32.dll' (Exception from HRESULT: 0x8007007E)
We use SAP ERP 2005 on Windows 64 Bit.
Can some one help with the problem?
Thank you very much!
regards
Thom

You can download the latest avaiable kernel or just the librrfc component from http://service.sap.com/swdc. They maybe an issue with this DLL. Just download the latest one and copy into \usr\sap\<SID>\SYS\exe\run directory. Be sure to save the previous DLL.
Thanks
Adil

Microsoft Visual Studio - Unable to load DLL 'librfc32.dll'

Hi,
I'm experiencing the following problem:
When trying to establish a connection between SAP BPC MS and our SAP NW BW system.
I've created a new Integration Services project in Business Intelligence Development Studio. The issue comes up when I try to test the connection:
TITLE: Microsoft Visual Studio
Unable to load DLL 'librfc32.dll':
This application has failed to start because the application configuration is incorrect.
Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1)
I've placed the librfc32.dll library file on C:\WINDOWS\system32\.
I ran R3DLLINS.EXE according to Note 684106 - Microsoft runtime DLLs.
This placed all the needed dll library files (msvcr71.dll, msvcp71.dll, mfc71.dll, mfc71u.dll) on the correct path (C:\WINDOWS\system32\).
I keep getting the same error.
Platform:
Windows 2003 R2 SP2 32-Bit
MS SQL Server 2008 SP1
SAP BPC 7.0 Microsoft Platform
I've checked out some other posts on SDN but it didn't solve my problem:
Re: librfc32.dll not found on Windows Server 2003
LIBRFC32.DLL not Found Error
Re: librfc32.dll
Any ideas?
Thank you.
Bruno Pereira
Edited by: Bruno Pereira on Mar 23, 2010 5:34 PM
Edited by: Bruno Pereira on Mar 23, 2010 5:36 PM

I was able to work it out.
For your reference:
Issue arrises from the fact that Business Intelligence Development Studio isn't able to load the librfc32.dll without the [Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update |http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en#filelist]implemented on the system.
Reference SAP note:
[Note 684106 - Microsoft runtime DLLs|https://service.sap.com/sap/support/notes/684106]
Bye!
Bruno Pereira

Librfc32.dll exception for ECC 6.0

Hi,
My customer just upgraded from SAP R/3 4 to ECC 6.0. All the RFC calls now raise an exception in the librfc32.dll.
Here is the error from the event viewer:
Faulting application consoleapplication1.vshost.exe, version 8.0.50727.42, faulting module librfc32.dll, version 7100.0.0.5288, fault address 0x00001c01.
Is there a braking change in ECC 6.0 RFC protocol? Do I need a new librfc32 dll file? Everything is working from SAP GUI v7.10 and I think that application is using librfc32.dll.
Any help is much appreciated.
Best Regards
Torkel Ödgaard

Dear Poornima,
As per my experience,better to go for above 160GB hard drive(250GB will be
good) and 2 GB RAM is required for Laptop's.
All the best.
Regards
Mangal

SAP librfc32.dll

How critical is it to use the librfc32.dll version (file version 4640,5,123,2956) referred to in the OWB 9.2 User Guide? I can't find this exact version and I have no errors when creating a SAP source module. However, when I try to import tables from SAP by browsing Business Component, the loading progress dialog disappears after 1 second and a blank SAPR/3 Business Component Hierarchy view opens.
Even if I remove the librfc32.dll file from the OWB_HOME\owb\bin\admin location on my client, the above still applies. Should this file be placed somewhere else to make a connection to SAP?

We are using OWB 9.2.0.2.8 There are many versions of librfc32.dll. Where can I find the exact version mentioned in the user guide, if this is critical?
The user guide says this dll should be placed in OWB_HOME/bin/admin. On my installation I have either OWB_HOME/bin with no /admin sub-directory, or I have OWB_HOME/owb/bin/admin. I assume the latter directory location is the correct location for the dll (or do I need to create a new admin sub-directory under OWB_HOME/bin?).

Missing LIBRFC32.DLL file for 64bit - x64 Windows Server

Dear Folks,
I have installed SAP ECC6 with BI7 system on Windows Server 2003 on x64. But I am not able to get data from SAP BW from Crystal Report 2008. I also did MDX PARSER connection test through t.code SM59. I got list of error messages.
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host ns2 / sapgw00
Error Details     DETAIL: no connect of TP mdxsvr from host ns2 after 20 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 798
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 5873
Error Details     RETURN CODE: 242
Error Details     VERSION: 2
I have been read other forums, most probably I am missing LIBRFC32.DLL file for x64 Windows Server. I couldnu2019t find any where this specific file for Windows Server x64 64bit version. It is available on Sap Market place, since I donu2019t have super user rights, I canu2019t download it.
If any one of you already have this file. Please share with me.
thanks
Obaid

Hello Ingo
Thanks to read my problem and for your reply, I have already read that SAP Note 1032461, I have the same problem as clearly defined in the note, and suggesting to put LIBRFC32.DLL file in <windows-dir>/system32 folder.
My SAP ECC and BI7 (Kernl 7.00) is installed on 64-bit, x64 Windows Server 2003 Enterprise. I need to download that file from RFC library available on SAP Market place. But, I don't have any super user rights.
If someone has similar setup and has already that file or could download for me. I need to get that file. I appreciated your kindly help.
thanks
Obaid

Difference between 620 version and 640 version of librfc32.dll

Hi,
What is the difference between librfc32.dll (620 version) and librfc32.dll( 640 version).
If I built my application with librfc32.dll(620 version) can I deploy it in a environment where librfc32.dll(640 version) is used.
please let me know if my application will break or face some problems.
Could you please reply as soon as possible , we are facing problem with production environment, just want to confirrm if this could be the root cause.
Thanks
Sivasankari

hi sivashankari,
librfc32.dll troubles
Once you are working with SAP BW BEx tool and accessing different version of SAP BW you might encounter an error in BEx Query Designer says: "Run-time error '-2147417848 (800010108)': Automation error The object invoked has disconnected from its clients". BEx Query Designer crashes afterwards.
Solution is to replace the RFC library librfc32.dll stored in your \WINDOWS\system32 on the client PC with a proper version depends on you SAP GUI version:
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
710: check the newest patch of SAP GUI .
regards
karthik
reward me points if usefull

Librfc32.dll

I have several web services built using the connector 2.0. After I deploy to a bare production machine, I also copied the librfc32.dll to the system32 folder. When I try to use the web services, I get the followig message:
DllExceptionNotFound (cannot find librfc32.dll)
any help is appreciated.
Note: in development, I installed the SAP GUI on the machines and never encountered any problems. Installing the SAP GUI is not an option on the production machines.
Philip

I got an error at time my function to drag and drop function into the SAPProxy1.sapwsdl file.I develope my project as asp.net web application in Visual Studio .NET 2003.
I think, If I see my function at server explorer, how Sap connection can be wrong I dont understand. while I just drag and drop function into the SAPProxy1.sapwsdl file, I get an error.
I installed:
SAP.Net.Setup_2.0
Java 6 update 11 (jr6)
but I 'm getting error below:
using logging implementation u201CAII Loggingu201D Exception in thread u201Cmainu201D com.sap.aii.upload.sap.SAPConnectionexception$connectFailed:Unable to establish connection to R/3 system u2026.(system=..;client..;)
at com.sap.aii.upload.sap.SAPConnection.connect(SAPConnection.java:103)
at com.sap.aii.upload.sap.SAPConnection.(SAPConnection.java:38)
at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:81)
at com.sap.aii.upload.tool.RFC2WSDLTool.main(RFC2WSDLTool.java:196)
How can I solve this situation?.
Thank You
Edited by: emrean on Aug 25, 2009 12:55 PM
Edited by: emrean on Aug 25, 2009 12:55 PM

Guide to overcome hal.dll error - disk error & other errors.

Okay to start off with - guide for installing bootcamp.
DISCLAIMER:
I take no responsibility at all - whatsoever for any damage the following steps cause to anything. If you follow this guide and then are annoyed at me in any way - don't be - you followed these steps knowing they could be dangerous to your hard drive / computer / sanity / etc. That said - good luck & these steps should work for everyone.
requirements: XP SP2 CD & a copy of parallels would be useful. Also a non-apple usb keyboard for step 1 if the apple one doesn't work during xp bootup.
1. First try the usual bootcamp assistant method. Insert the xp disk, in the setup make sure you format the drive to NTFS (not quick). If you don't get this option - skip to step 3.
2. Reboot and hopefully everything will go without a hitch. If it doesn't and you get a hal.dll error or any other kind of error go on to the next step.
3. Boot up mac os x. Install parallels desktop.
4. Insert your windows xp sp2 cd.
5. Create a new virtual machine using a virtual hard drive saved in your documents folder somewhere.
6. Configure it so that the bootcamp drive is added as an extra secondary drive in the virtual machine. (Little plus button down at the bottom).
7. Install XP onto the virtual machine - don't activate or anything, just get to the desktop stage as fast as possible.
8. Parallels will have already asked for your password to dismount the boot camp drive.
9. Double click my computer in the virtual machine, then hold down ctrl+shift and click on the BOOTCAMP partition in the my computer window.
10. Click format.
11. Select NTFS as file format, check enable compression - do not check quick format.
12. Wait till its finished and then power down the virtual machine.
------- The following steps are taken from http://communities.vmware.com/thread/114529 and were written by MandarMS from the vmware forums. I have edited the guide a little - (you'll see where). Thanks and all credit to MandarMS.----
13. (James: Close parallels)
14. Quit all applications in Host Mac OS X
15. Open Terminal utility from Macintosh HD : Applications : Utilities folder.
16. Key-in the following command
$ sudo fdisk /dev/rdisk0
17. Preferably take the screenshot of the output or Note down the output (for restoring MBR).
18. Key-in the following command
$ sudo fdisk -e /dev/rdisk0
setpid 3
Choose 07 (as the partition type)
write
Y
Restart your Mac System
(James: EDIT - BELOW IS AN EXAMPLE OF THE OUTPUT OF THE PROGRAM IF YOU ARE UNSURE OF WHAT TO TYPE IN WHERE - This confused me at first but really helped in the end - James)
For more details please check the example shown below:
$ sudo fdisk -e /dev/rdisk0 (this will help to change the MBR)
$ fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> setpid 3 (Enter “setpid 3” press enter key)
Starting Ending
#: id cyl hd sec - cyl hd sec start - size
*3: 0B 1023 254 63 - 1023 254 63 1127792680 - 337356448 Win95 FAT32L
Partition id ('0' to disable) 0 - FF: [C] (? for help) 07 (Enter 07 Partition table)
fdisk:*1> write (enter “write” press enter key, This will change the MBR)
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] Y (Press Y to modify changes)
Writing MBR at offset 0.
$ fdisk: 1> exit (enter “exit”, press enter key)
19. Restart your Mac System
------ Back to me again.
20. Welcome back - your drives have just been fixed. Reboot again and insert the windows xp sp2 cd. Hold down option at startup and boot from the cd.
21. Go through the setup again - this time don't do anything to the drives when it asks you to format.
22. wait...
23. It'll reboot......
24. It'll install..... if it doesn't - skip to step 26
25. Welcome to windows, install your drivers and reboot a couple more times. You're good.
26. (it didn't work... you got the hal.dll error or something similar) Boot up mac os x again and launch parallels.
27. Start up the virtual machine - open up BOOTCAMP in my computer.
28. Click view - folder options
29. View types > make sure you can see hidden files and folders, view system files and etc.
30. Right click boot.ini and click properties
31. Uncheck read-only.
32. Click okay - open boot.ini in notepad.
33. If you're on a mac with 2 partitions: 1 mac hd, 1 bootcamp, delete everything in the boot.ini file and copy and paste the following into it:
\[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
\[operating systems]
multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
Obviously change the name to suit. Save it and reboot - you should be good to go now.

Hi. Your bootcamp drive should be drive C. It shouldn't matter what drive letter it is really, you make the virtual machine disk as a virtual disk saved in your documents folder and hook it in to use your physical bootcamp drive.
Ensure you've typed in the correct command and correct password. Press enter after you type in the password. You won't see it as you type it in, and you may need to wait some time afterwards before you'll see the next prompt. Leave it 2 minutes.
Sorry I've been abroad.. hope you have it worked out by now anyway mate.

NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010

This problem seems similar to the post "Resource not found error in executable on development machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards.
I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010. The code was using a custom executive and my task was to rewrite the test using TestStand 2010. I reused the majority of the old code. The old code used NI-5660 to control the 5600 and 5620. When I run my sequence using the LV Development System and TestStand, it runs without any issues. When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues. It warns that the nipxi5600u.dll was not initialized correctly. Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter. The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again.
I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace. I also used Dependency Walker to track down the problems with the nipxi5600u.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32). I have also performed a Mass Compile to make sure everything was running in LV 2010. If I skip the steps involving the 5660, my entire sequence runs fine.
The previous code was running with the LabVIEW Run-Time Engine without any issues. Is there just a step I am missing? Has anyone seen anything like this before? I can send screenshots of errors to provide more detail if necessary.

I have tried some more things and still can't get it to work. I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs. This did not change the results.
When I try to run my sequence, The first error I get is shown in Error 1445.bmp. This happens when I try to use the NI 5660 initialize.vi. If I click ignore, the next error I see is shown in Error -20551.bmp. When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp. When I close TestStand, I get the error LabVIEW Fatal Error.bmp.
Attachments:
Error1445.JPG ‏164 KB
Error -20551.JPG ‏174 KB
Error loading nipxi5600u.JPG ‏9 KB

Hello, I have windows 7, Im getting msvcr80.dll error 7(windows error 126) when I tried to update my itunes. Now it won't open. Does anyone have a remedy? And when I try to uninstall it says that the file cant be found.

Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.

Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try.

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

IPod Classic Crashes randomly with ntdll.dll error

Sometimes when I plug-in my 120GB iPod Classic, iTunes would crash, giving me a ntdll.dll error, and I would need to unplug my iPod classic before it would allow iTunes to start again. Upon disconnect, the iPod will try to restart and then it would unsuccessfully do so, and then it would reboot and tell me to restore via iTunes. After I plug it back in, the iPod would restore fine. It seems that if I don't sync my iPod for a couple of days, the possibility of this error happening is most likely, versus if I plugged it in consistently every day.
I have had this issue for quite a while here are the steps that I've taken to try to mediate this issue:
-Switched iPod twice with Apple Store
-Tried the sync on two different computers with completely different hardware (but windows 7 on both)
-Made a new iTunes library
-Search the support forums/google
-Tried various cables
Here is the error logs from the most recent crash:
Faulting application name: iTunes.exe, version: 9.0.3.15, time stamp: 0x4b590a69
Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
Exception code: 0xc0000005
Fault offset: 0x00052bf8
Faulting process id: 0x384
Faulting application start time: 0x01cad74f5f441de7
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: a9fac431-4342-11df-9742-00238bf6c0ab
Any help would be appreciated!

OK So I sync'd it this afternoon and in the evening, I plugged it in again, and this time it caused iTunes to crash with this error:
Faulting application name: iTunes.exe, version: 9.0.2.25, time stamp: 0x4afca401
Faulting module name: iTunes.dll, version: 9.0.2.25, time stamp: 0x4afca3e5
Exception code: 0xc0000005
Fault offset: 0x00abc4c0
Faulting process id: 0x728
Faulting application start time: 0x01cad7c0e0284b0c
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\iTunes\iTunes.dll
Report Id: b9bf634a-43b4-11df-b2dc-0015f20ac1cf

Here are the instructions on how to fix the newest update problem with the .dll error message:, Here are the instructions on how to fix the newest update problem with the .dll error message:

Go to My Computer, Uninstall Programs, and uninstall in this exact order :
      Itunes
      Apples Software Update
     Apple Mobile Device Support
     Bonjour (my system required a reboot on this one)
     Apple Application Support
Reboot your computer, go to the official Itunes website (make sure it's the Apple Itunes Website and not some other one!), and reinstall Itunes.
I got the same .dll error message after the reinstall, but my Itunes was downloaded successfully and I was able to Sync my phone. : )
Good luck to you and God Bless!
(Sad that we have to come to the Discussion Forum to figure this all out instead of Apple taking care of their business and helping us out, huh?)

Someone else said they did a system restore to a previous update, and then a java update and that worked for them, saying they were going to stick with the earlier version of itunes until they get the bugs out of the new one. I t tried restores and that didn't work for me either, but maybe it will work for you. Good luck and I hope you get it working soon..

Librfc32.dll error

Similar Messages

Maybe you are looking for