License Check
Does anyone has an idea how one can integrate a license check in a Java Program?
Are there any license check packages?
I want to add a license check to my Java application what is the best way to do this?
Thanks for your hints!!
There are a lot of ways to do this. One good way would be to generate a one-way hash from a set of known data. Take a set of data to uniquely identify the user: last name, first name, company name, etc. To node lock the key to a specific computer you could also add the IP address or something similar. Take all this information and produce a MD5 hash or similar algorithm. A good one-way hash is very difficult or impossible to decipher.
As the previous poster stated these things are not bullet proof. No software that operates on an open hardware system can be completely secure. The reality of it is that most people are not going to waste the time to reverse engineer a product if it's fairly complex.
Similar Messages
-
Error in license check - Error getting the hardware key
Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan -
Error in license check on (what is supposed to be) the ABAP developer edition 7.02
I obtained (at least what I thought to be) the Developer Edition (7.02), the information for which gave the impression that it had a permanent license, but the license seems to have expired , and now I cannot log on: Status bar says Logon not possible (error in license check).
I've spent a diverting morning searching and even chatting with SAP about how to get running again (they suggested I re-install, which would not be a problem if it didn't take a whole freaking day to do).
Surely this is a known issue, but I can't find it.
What does one do with a piece of software that is supposedly never to expire but does?Login with SAP* and enter transaction SLicense (there you can see information about license and validity).
There you can see an install button which opens a folder where the license should be (txt file sent from SAP by E-Mail after you entered the information in the websit formular which was mentioned above).
It should be the same mechanism for 7.02.
Cheers -
Server0 getting down and logon not possible ( error in license check)
Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul GuptaLicense issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name : server0
-> node type : server
-> node execute : no
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta -
Oracle License Checking Failing!
Hi,
I am trying to get the JDBC driver for Oracle working but
am getting the following error when I try to use the dbping
utility provided:
java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!
There is a copy of the WebLogicLicense.xml file in my WL_HOME directory.
I'm sure I must be missing something really silly - please help!
Thanks!
Sukhy
[att1.html]i have the same problem as the exception u specify. Seems like the dbping cannot
find the license althought i include the path to the xml to my classpath. I am
using Weblogic6.1. Anyone has the idea?
ray
"Utpal" <[email protected]> wrote:
>
>
Please include the path to the WebLogicLicense.xml in your classpath.
-Utpal
"Sukhy Gosal" <[email protected]> wrote in message =
news:[email protected]...
Hi,=20
I am trying to get the JDBC driver for Oracle working but=20
am getting the following error when I try to use the dbping=20
utility provided:=20
java.sql.SQLException: Fail to load jDriver/Oracle due to license =
checking failed!=20
There is a copy of the WebLogicLicense.xml file in my WL_HOME =
directory.=20
I'm sure I must be missing something really silly - please help!=20
Thanks!=20
Sukhy=20
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4522.1800" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Please include the path to the <FONT=20
face=3D"Times New Roman" size=3D3>WebLogicLicense.xml in your=20
classpath.</FONT></FONT></DIV>
<DIV>-Utpal</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Sukhy Gosal" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>> wrote
in =
message=20
<A=20
=
href=3D"news:[email protected]">news:3BAF659C.ADA3BF3B@digita=
s.com</A>...</DIV>Hi,=20
<BR>I am trying to get the JDBC driver for Oracle working but <BR>am
=
getting=20
the following error when I try to use the dbping <BR>utility provided:
=
<P><B>java.sql.SQLException: Fail to load jDriver/Oracle due to =
license=20
checking failed!</B>=20
<P>There is a copy of the WebLogicLicense.xml file in my WL_HOME =
directory.=20
<P>I'm sure I must be missing something really silly - please help!=20
<BR><BR><BR><BR>Thanks! <BR>Sukhy </P></BLOCKQUOTE></BODY></HTML> -
Background job failing with license check error
Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = hostname
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = host
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login. -
Login Issues with license check
Hi All,
We have had some issues with starting the database after a virus attack on our network. We have now sorted this out with the help of an Oracle DBA. We can now start the database as well as the central instance fine.
But, when our users are trying to login, they are getting the error "Logon not possible (error in license check). I have also tried with the SAP* and DDIC users in 000 client. But no luck.
O/S: Windows 2000 Server
DB: Oracle 9i
SAP: 4.7 EE
Can someone help me plz?
Thanks
VijayRegarding the error "Logon not possible (error in license check),
Few suggestions:
1. Please copy and paste the output from the following commands:
-> saplicense -version
-> saplicense -install trace=2 (this generate dev_slic file)
-> saplicense -get
-> saplicense -show
2. DB connect problem... Sometimes this error can occur when there are
connection problems to the central instance. During logon system checks
if a valid license is installed by reading the entries in table MLICHECK.
SAP* will bypass the MLICHECK check. So, sometimes this error can occur when there are connection problems to the central instance (message server). This could be a temporary problem. Please try to restart your SAP servers if this helps.
3. See SAP note 359944, 193800
4. Copy and paste the output of command "R3trans -dx"
5. Check the file /etc/services for missing entries, example like
sapms<SID> 3600/tcp
sapdp00 3200/tcp
sapdp99 3299/tcp
sapgw00 3300/tcp
sapgw99 3399/tcp
6. use the message-server-test tool 'lgtst' as per SAP note
64015 to see whether you can connect to the server.
7. can you ping the message server ? check parameter rdisp/mshost, IP
address on host table ?
cheers,
Vincent -
Error in License check for IDES ECC 6.0
Hi All,
I am unable to log into our 800 client since yesterday, i am getting the foloowing error while trying to log in
"Logon not possible (error in license check)"
Before this we were getting a warning message that the license will expire in 10 days, so i deleted the old license and then it was ok for rest of the day.
But today we are not able to log in at all.
The new license that we applied at service market place is active and still we have this problem.
Can anyone please tell me how to solve this problem.
Its very urgent as our client has to go for their level two training.
Looking forward for a quick reply.
Thanks in advance
hunkyHi,
If you keep getting license issues check that the hardware key, validity date, system name, installation number etc.. are right.
If you can't access the system is because theres something wrong with the license, I suggest you to request a new license and make sure all the details are spot on... then install the license. If this doesn't fix your problem... open an OSS to SAP.
Regards
Juan
Please reward with points if helpful -
To whom it may concern,
It looks that my license is expired but based on the instructions to update my license I'm unable to get into the Visual Administrator to update. It kind a caught 22? How am I going to update the license key if I'm unable to log into the Visual Administrator? Anyone has any suggestions? Is there another way to update the license key?
Rich
Trace logs
JControlICheckProcessList: process SDM started (PID:2828)
Tue Sep 05 15:50:04 2006
JControlICheckProcessList: process dispatcher (pid:2820) died (RUN-FLAG)
JControlIResetProcess: reset process dispatcher
JControlICheckProcessList: license check failed
JControlMainLoop: license check failed -> shutdown the instance
JControlProcessMessage: received command
JControlIStopInstance: shutting down (command: 0)
JControlIProcessSoftKill: soft kill of process server0 (pid:2816)
*** ERROR => invalid connect to named pipe (rc=232)
*** ERROR => Can't send soft kill (rc=-1)
JControlIProcessSoftKill: soft kill of process SDM (pid:2828)
*** ERROR => invalid connect to named pipe (rc=232)
*** ERROR => Can't send soft kill (rc=-1)
Tue Sep 05 15:50:09 2006
JControlICheckProcessList: process SDM (pid:2828) died (STOPPING)
JControlIResetProcess: reset process SDM
Tue Sep 05 15:51:30 2006
JControlICheckProcessList: process server0 (pid:2816) died (STOPPING)
JControlIResetProcess: reset process server0
JControlCloseProgram: started (exitcode = 0)
Tue Sep 05 15:51:31 2006
JControlMSMessageFunc: shutdown -> terminate message listener
JControlMSMessageFunc: leave listener thread
JControlCloseProgram: good bye... (exitcode=-11111)
Update license key instructions.
In the Visual Administrator choose Server 0 ® Services ® Licensing Adapter. The system data that you need to request the license from the SAP Service Marketplace appears.
¡ Installation number (if it exists)
¡ System ID,
¡ System number (if it exists)
¡ Hardware key
¡ Current release
2. Under the Internet address service.sap.com ® mySAP Business Suite, you can get to the initial page of the license key requests in SAP Service Marketplace. Here you will find all the information you need to request license keys.
3. Enter your e-mail address in the request. The license key will be sent to you promptly by e-mail. Alternatively, you can also download the license key from the SAP Service Marketplace.
Do not make any changes to the license key. To import the license key, the file must not have been changed.
4. In the Licensing Adapter in the Visual Administrator choose Install License from File.
5. Select the license file that you want from SAP.
Result
The license has been installed.
You can view all the licenses installed in your SAP System, by choosing, in the Visual Administrator, Server ® Services ® Licensing Adapter, then tab Runtime ® Installed Licenses.
Additional Information
For more information about requesting license keys, see SAP note 94998.HI ,
To apply License on Java system following are the prereqs
Request the license on the SAP Service Marketplace (service.sap.com/support): Software Distribution Center ® License Key Request.
The licence team sends the license as a text file .
Use that to apply after starting the Java system as mentioned Below:
In the Visual Administrator choose Server ® Services ® Licensing Adapter and browse the saved license file.
You require the specified data to order a new License Key.
Regards
Vijay Kothapalli -
N4S Test Drive New License not Allowing Logon (error in license check)
I reinstalled my N4S testdrive after a NIC failure caused all sorts of problems - the demo license had expired, so I requested and received a new demo license from SAP.
I've installed the license via SLICENSE, and the license is showing as successfully installed, and has the green light next to it. However, I can only logon as SAP* - none of the other created users can logon - the error message on client 001 is:
Logon not possible (error in license check).
I've reinstalled the license, but this hasn't helped. I'm wondering if there is something still on my system pointing to the old expired license. Has anyone come across this before or have any ideas?
Many thanks.Hi,
i had same problem and on tr "\nslicense", on tab "Digitally-Signed licenses", on the left of message "A valid license key is required to operate this system" , there's the name of product (of course).
If you request your license key on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm there are various system Ids with the same name.
In my product "NetWeaver_ADA" the correct license is the second of three products with name "NPL - SAP NetWeaver 7.02" . When you receive your license via mail you have to find "SWPRODUCTNAME=" , in my case i found "SWPRODUCTNAME=NetWeaver_ADA" because that's my product.
Hi have requested 3 licenses and lost 4 hours,
regards -
LOGON NOT POSSIBLE. ERROR IN LICENSE CHECK -- NO HWid from message Server
We could logon to the EC6 system. I
Stopped the EC6 system and started
it . It started with License Key
Error. the License key was available
and was shown in SLICENSE transaction
but it was giving LOGON NOT POSSIBLE.
ERROR IN LICENSE CHECK.
SO I deleted the TEMP and the Original
License via command SAPLICENSE -DELETE
and then REINSTALLED THE LICENSE with
the details
SAP System: EC6
Inst. Number: 0020174764
Hardware Key: Z1686313186
System Number: 310590866
Expires On: 31.12.9999
Key:
RZKGNA79K9U4F7D7SGGOWU1V
The License was successfully installed
but Still the samer error .LOGON NOT
POSSIBLE. ERROR IN LICENSE CHECK
Somehow it is not getting the hardware
key.But when I run the command
saplince -get then it returns
saplicense: HARDWARE KEY = Z1686313186
DEV_W0 log says that
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 509]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2268]
Please HelpSergo
My sapmsEC6 has been assigned to 3601 port as my instanace number is 01 . So that is correct. the Thread which has given didn't help . Thanks for you inputs.
Yogesh -
Hi Friends ,
I am currently using SAP version 4.6c running on windows server 2003 and database running on SQL server.
All the users at my site are getting the below message while login to production
"Logon not possible Error in license check"
I have already check the sap license and it is still valid and has not expired.
Kindly help me out.
Regards
GauravHi,
Login to OS level as SIDadm user and give command saplicense -show.
check if every thing is ok or else post the output.
Regards
Ram -
Prevent ATP confirmation if license check fails
Hi
We are using SAP foreign trade ( legal control ) for controlling licensing requirements in sales orders. However, if a line item is on a hold due to failure license check, the schedule line is still confirmed thus blocking stocks against the line item.
We would like to hold the confirmation on the line item if it has failed license check.
Has anyone been able to achieve this ?
Appreciate your help
Regards
Rohit ZalaniHi,
I have a similar requirement and I have proposed a solution which was accepted by my client since they have barely 2 or 3 line intems in a particular sales order. I do not know if this will really be helpful for you but you may give it a try.
The solution would be to place a reason of rejection (with description as approval block) at the item level. When a reason for rejection is placed on a particular item, it will not transfer the requirements to MD04. Once the approval is received you can remove the reason for rejection. This will again populate your requirements in MD04. I have tested and given it to my client and they are using it perfectly fine.
You can also include this reason for rejection in Incompletion log so that the user dosent forget to assign the reason fofr rejectio before saving the order. You can also get a report of rejected orders in VA05.
The downside of this is that if there are 100-200 or more line items in a particular order, then manually assigning a reason for rejection and releasing it would be difficult. You might have to think of some logic to be built to automate this.
Please let me know if this helps and if you find any alternate solution please update it in this thread.
Regards,
Rohan -
Stopped, license check failed
Hi, after use NW about 2 month, now the proccess jcontrol.exe is stopped, in he status appear the error: "Stopped, license check failed". If i restar the computer, work, but only about one hour... What happend?
Thanks,Hi,
Follow these steps..
To generate the license key you need to follow this procedure.
Find out the hardware key of your instance.
For this go to the visual admin----
> licensing adapter
Visual admin has to be accessed from this path \usr\sap\SID\JCxx\j2ee\admin and run go.bat
You should also have a S-user ID to generate the license.
Go to service.sap.com/licensekey
Give the required credentials.
Then supply the required details like SID, hostname, Database etc..
You will get a license file after some time.
Then again go to Visual admin----
> licensing adapter
upload the license file, and the licensse will be applied.
revert back if you have any queries.
Do reward points if useful.
Regards,
Nayana -
I have just purchased Photoshop Touch through Google Play store. When I try to run it I get an error message saying license check failed and to sign in to Google play but if the problem persists to contact Adobe. Any ideas what the problem is?
When you launch PSTouch for the first time it's important to have network and you're signed-in with your play account. Please try this...
1. Uninstall PS Touch
2. Reboot the device and reinstall PS Touch via
the play store app
3. Launch PSTouch . For the first launch of the app you need a network connection and signed in with your play account
Hope that helps.
Guido
Maybe you are looking for
-
ITunes 10.2.1.1 crashes when using the visualizer
Running Win7, completely up to date, NVIDIA GeForce G210 with current drivers. When I start up the visualizer iTunes runs for a few songs and then suddenly goes silent, screen goes black, and my entire system freezes requiring a hard power-down. Th
-
Mail not responding under one user. Need to Force Quit to get out of it. My mail works when I log on as a user. Downloaded the latest Mountain Lion updates and reinstalled Mountain Lion as per Apple Phone Support instructions TIA
-
How to access SQL tables from WebDynPro ABAP application ?
Hi, I am trying a scenario, where I need to send an user ID to SQL server table (update/modify/delete) from webDynpro ABAP application. Basically ,I am trying to know:--- a>How to write a SQL Connection from ABAP code within webdynpro ABAP applicatio
-
ORA-22922: nonexistent LOB value during import
During the import of a dump file of a database with a table holding several CLOB column I get the error message 'ORA-22922: nonexistent LOB value' the import is partially rolled back and fails in the end. How can I get around this problem? Is there a
-
Hi, I wanna migrate Standard Textes (ST) from one SAP-System to another via RFC. Is there a standard Function Module from SAP available ? or let me know a User FM if possible! So, I don't wanna store the ST temporary and I don't wanna use the Report