License error launching IDM

Hi all,
I am evaluating the Identity Management Sutie and have installed the whole thing on a single vm image with Oracle 10G as the index db. My goal was to install the demonstration scenario for the Identity Managent.
Everything installed fine without complaint or difficulties, except with browsing to the Sun Java System Identity Manager console I get the following error:
ERROR:com.waveset.util.InternalError: License not initialized! ==> com.waveset.util.InternalError: ==> java.lang.SecurityException: Sealing violation loading oracle.sql.BlobDBAccess : Package oracle.sql is sealed.
When I check the license status with lh license status, I get:
License Information
License is valid.
Licensed to: Free use license.
Licensed Products: Identity Manager
Any ideas what the solution to my problem might be?
Best regards and many thanks,
James

this usually occurs when your repository configuration has gone wrong
try reconfiguring the repository after removing it.
and remember to run the "create tables scripts" before you run the lh setup or lh setRepo
Thanks
nsankar

Similar Messages

Java error when launching IDM

I've tried Java v1.5,1.6 or the version posted on the Cisco Web Site but still no luck HTTPs into the box. When it launches, it displays error
your current Java memory heap size is less than 256MB. You must increaste the java memory heap size before launching IDM...
I looked up help, it says to add -Xmx256m to the parameter field. So I did it and launched browser again, it came back with "The Java Runtime Environment cannot be loaded".
Any ideas, anyone?
Thanks

This is a general problem with Java at the time of launching of IDM or ADSM etc. I came across the same problem several times.
Please uninstall the installed JAva from your machine. Re-Install the same with the mentioned version & do the following as per the instruction of adding the heap size. It will surely be over comed.

App-V 5 Adobe Creative Cloud (CC) Enterprise Licensing Error 213:19

Hello, I've posted this on Adobe forums but also posting here to see if anyone else has experienced/overcome this issue.
I'm attempting to create an App-V 5 sequence for Adobe Creative Cloud Enterprise software, but I appear to be getting licensing errors when launching the App-V sequence.
From what I understand in Adobe Create Cloud Enterprise, the licensing restrictions which tie the license to the machine have now been removed so that the base packages can be created with serial numbers and can be included within build images etc as opposed
to creating a trial package and then using a serialization file at install/launch time.
To start with I've created a package using the Adobe Creative Cloud Packager tool (CCP) for just the Illustrator CC application which includes the serial number. I've then sequenced this package using App-V 5 SP1.
When I run this app-v sequence on a test machine , Illustrator loads but I end up with a 213:19 error. Looking in the amt3.log the full error is
09/24/13 16:58:35:478 | [ERROR] | | | | SLCoreService | | | 5624 | error deleting bad mkey:
09/24/13 16:58:35:478 | [ERROR] | | | | SLCoreService | | | 5624 | Could not load machine key
09/24/13 16:58:35:478 | [ERROR] | | | | SLCoreService | | | 5624 | License store synchronization took 14.6 ms and return "License Store Access Failure: Machine key cannot be deleted (213:19)".
09/24/13 16:58:35:539 | [INFO] | | | | ALM | | | 5624 | _time_: (func: ALM_License_SilentValidate, duration: 0.078 sec)
09/24/13 16:58:35:539 | [INFO] | | | | ALM | | | 5624 | _info_: ALM_License_SilentValidate return license status: Invalid and error: 213 : 19
09/24/13 16:58:35:539 | [ERROR] | | | | ALMService | | | 5624 | ERROR: License_Check error 213:19. (Errno = 2)
I've tested out modifying permissions on the following folders within the app-v package under root but this has no effect.
C:\Program Files\Common Files\Adobe\Adobe PCD\
C:\ProgramData\Adobe\SLStore
I've also tried creating a package using a trial licence and then using the adobe_prtk.exe tool to serialize the product at launch (startprocess event in userconfig file) with no success.
Anyone tried this or have any ideas?

Hello, thanks for the reply.
I have read those articles (multiple times :-)) I've installed the required c++ redistributables on the sequencer and also on the test machines.
I'm not getting any errors being reported in the App-V eventlogs.
I initially used the adobe_prtk.exe tool to serialize the app-v application at launch via startprocess in the userconfig file as shown. This runs but it doesn't work around this issue.
<UserScripts>
      <StartProcess RunInVirtualEnvironment="true">
        <Path>[{AppVPackageRoot}]\..\Scripts\adobe_prtk.exe</Path>
        <Arguments>--tool=VolumeSerialize --provfile=[{AppVPackageRoot}]\..\Scripts\prov.xml</Arguments>
        <Wait RollbackOnError="true"/>
<ApplicationId>[{AppVPackageRoot}]\Support Files\Contents\Windows\Illustrator.exe</ApplicationId>
      </StartProcess>
    </UserScripts>
Following that I read that AAMEE 3.1 removed the (http://blogs.adobe.com/oobe/2012/09/aamee-3-1or-why-puffer-fish-is-a-delicacy.html) machine to license issue
therefore allowing packages to be created using serial numbers and to be included within build images.
As I'm packaging Creative Cloud (not CS6), I'm assuming this has been carried into the Creative Cloud Packager for Enterprise which now must be used.
Any other ideas appreciated.

Adobe X Standard Licensing error

I am having trouble installing Adobe X Standard on windows 7 machines. I am putting it on a image. It is giving users the licensing error message and to uninstall and reinstall. After we uninstall and reinstall we don't get this message. I used the Adobe Customization wizard to create the install package. Anyone seen this issue before?

We are experiencing the same problem
1.       Acrobat Professional X
2.       Volume License
3.       Windows 7 (x86) Enterprise w/ SP1
4.       Adobe Customization Wizard X
a.       Volume Key
b.      Product registration
c.       Disable EULA
d.      Remove Desktop Icon
5.       Adobe Update 10.0.1
6.       Adobe Update 10.0.2
Create Image with MDT, Capture WIM, Deploy via SCCM OSD. (Note: Items installed via MDT use the SYSTEM account)
Replication Notes:
1)      If you are a local admin you do not experience the problem
2)      If you are a non-local admin and you open a PDF directly (without open Adobe and accepting the EULA first), you receive this error:
Configuration Error
                A problem has occurred with the licensing of this product. Restart your computer and re-launch the application.
                If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
                Error: 213:19
3)      If you login as a local admin, open adobe, accept the EULA, log off, login as user (non-admin), and open PDF file, everything then works correctly. (not an option on several thousand computers)
4)      It appears the transform isn’t applying the EULA portion correctly (on reference computer it definitely did), all other transform options are working correctly (Volume key, prod registration, and remove desktop icon) so the transform is being applied.
Let me know if I can provide any other information. We are able to replicate the issue consistently.
Thank you,
       Tony M.

License Error: mocha AE CC when opening quicktime mpg4 movie created by keynote

UPDATE - discovered answer myself. I set "Open with" and then chose Quicktime. It's not a keynote issue but how my mac is configured. For some reason it had defaulted to using Mocha AE as the application to play MPG4 files, and changing this has fixed the issue for now.
ORIGINAL NOTE:
I exported a keynote presentation as quicktime. Then when I try to run it I get a "License Error: mocha AE CC must only be launched from After Effects " warning. I have Adobe CC installed, but this only really concerns Keynote and Quicktime. Any ideas?

This will fix the file, but not the default app for all m4v on the system.
Make sure to click the "Change All" button after you have selected QT in the dropdown, this will change the default for all m4v to Quicktime.

UCCX 8.5.1 SU3 agent get license error on signon

Hi,
Having an intermintent issue on UCCX 8.5.1 SU3 w/CUCM 8.6.2 SU2.
From the agent debug logs, the day before the closing of CAD doesn't shutdown nicely it looks like (user did not report any errors at end of day when they shut down). The next morning they get licensing error when they try to log in and relaunch CAD 2-3 times then they can log in.
The CAD version is correct and the LRM logs from server don't show this agent attempting to log in during the error, and the LRM log file only shows a successful log in from this agents PC IP address on the successful login. I restarted the LRM service to see if it helps today. Single UCCX server (no HA).
AGENT DEBUG LOGS:
2013-03-18 18:09:19:128 WARN DESK2121 Unable to write agent state change to RASCAL: GID=1363615138 Error=CORBA error.
2013-03-18 18:09:20:267 WARN DESK2126 Unable to write call data to RASCAL: GID= 1363615138 Error=Client recovering connection to server
2013-03-18 18:09:44:821 WARN DESK2018 Unable to update wrapup data to RASCAL: GID=1363615138 Error=Client recovering connection to server
2013-03-18 18:09:44:821 WARN DESK2121 Unable to write agent state change to RASCAL: GID=1363615138 Error=Client recovering connection to server
2013-03-18 18:10:26:130 INFO DESK1004 RASCAL auto-recovery message received.
2013-03-18 18:10:26:161 INFO DESK1141 RASCAL Server Feature auto-recovery message received.
2013-03-18 18:15:06:259 WARN STD3000 Get registry key <MTS_CitrixInstall> under path <SOFTWARE\Calabrio\CAD\Site Setup>. Object not found: <2:The system cannot find the file specified.>.
2013-03-18 18:15:07:336 INFO SOCKET0000 <CADEEMConnector> service on port <59015> has started.
2013-03-18 18:15:10:112 INFO VOIP4005 Desktop monitoring disabled for extension [1047].
2013-03-18 18:15:11:782 ERROR DESK3007 Chat DropUser failed.
2013-03-18 18:15:11:782 INFO DESK1053 Remaining time <2000>
2013-03-18 18:15:11:782 INFO DESK1054 We received AS_LOGOUT so close CAD window.
2013-03-18 18:15:12:187 INFO DESK1049 Releasing Agent License...
2013-03-18 18:15:12:203 ERROR DESK3113 Unknown exception while releasing the license(s)
2013-03-18 18:15:12:484 INFO STD0005 Client <Calabrio LDAP> disconnected from service at <10.1.1.10>.
2013-03-18 18:15:12:593 INFO DESK1006 LDAP auto-recovery message received.
2013-03-18 18:15:12:593 ERROR FCCC2009 Unexpected exception (Unexpected exception in Chat client service thread).
The next morning, when they log in..
2013-03-19 09:59:09:009 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:009 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:072 INFO STD0000 Starting preference change event dispatch thread.
2013-03-19 09:59:10:179 INFO LC0000 Connected to Calabrio LDAP server on <10.1.1.10>.
2013-03-19 09:59:10:179 INFO STD0004 Client <Calabrio LDAP> connected to service at <10.1.1.10>.
2013-03-19 09:59:10:382 INFO DESK1122 Get Update Flag from LDAP successfully.
2013-03-19 09:59:10:554 INFO SPUD0000 Successfully launched update from <C:\Program Files\Common Files\CAD\bin\update.exe>.
2013-03-19 09:59:18:488 ERROR DESK3109 Could not obtain license from LRM.
2013-03-19 09:59:19:600 ERROR DESK3113 Unknown exception while releasing the license(s)
2013-03-19 09:59:19:600 ERROR DESK3113 Unknown exception while releasing the license(s)
2013-03-19 09:59:19:614 INFO STD0005 Client <Calabrio LDAP> disconnected from service at <10.1.11.10>.

Hi,
DESK3109 Text: Could not obtain license from LRM.
Type: Error
Add’l Info: LRM is not running.
Action: check if the server is running
DESK3113 Text: Unknown exception while releasing the
license(s)
Type: Error
Add’l Info: LRM is not running
Action: check if the server is running
FCCC2009 Text: Unexpected exception.
Type: Fatal
Add’l Info: CTIOS API waitforsingleobject fails.
Action: Check system resource availability (CPU and
memory).
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/reference/guide/cad85ccxecd.pdf
I would suggest you to please restart the UCCX servers or LRM service specifically in your maintainance window and see if it helps.
Thanks,
Anand
Please rate helpful posts !!

Studio Installer has strange licensing error

Hi folks,
Our Crossgrades just arrived today. Just tried to install but I get the following error messages. As a longtime mac user I know what privileges are all about but there is nothing I can do to get the software to work:
"Licensing Error: The license file will not be written to disk becuase the user does not have enough priveledges."
Well certainly do have enough priviledges and I've also tried to repair them, I'm as uptodate with Os X updates as you can be.
After that message it does let me run the installer which seems to go all the way through. I then try launching one of the apps, it asks me for a serial again and I get this message.
"Licensing Error
This application cannot continue because the licensing data is corrupt."
So there we go. Come on apple sort out your installers! They've been getting messy recently!
Any help's appreciated.
Cheers
Magnus

**** this doesn't work for me, I have 5.1 studio (universal binery) but it's not an upgrade it's the full version ie: I haven't ever installed sudio before, I get the same licensing error and unfortunately don't yet have the:
Library/Application Support/ProApps/Final Cut Studio folder to trash, anyone have any ideas ? I called apple but they didn't really have a suggestion for me apart from taking my g5 in to them to take a look at, that's a little differcult for me.
Any help would be much appreciated.
I'm the admin account so I should have full privilages.

Failure to verify licensing error when attemtping to install Portraiture

Using Adobe Photoshop CC 2014 and trying to install Imagenomic's Portraiture & Noiseware add-ons. Both show as installed when viewing my adobe add-ons page, but neither are showing up under filters in the program itself. When trying to install through the extension manager, I get the error "This extension cannot be installed because licensing verification failed."
Can anyone help? Thanks!

Hi Peter,
Uninstalling PS CS6 shouldn't make any difference to this problem so I wouldn't feel the need to do that.
Could you please email me the email address you're logged in as in the Creative Cloud desktop app? (my email address is [email protected])
If you could also please generate an Extension Manager log file and send it to me, that would be a big help.
1. Create a file named ExManCoreLibLog.YES. Only the file name is important. The contents of the file don't matter.
2. Copy this file to "C:\Users\<YourUserName>\AppData\Roaming\Adobe\Extension Manager CC\Log". If this folder doesn't exist, you can create it.
3. Launch Extension Manager CC.
4. Repeat your usual steps until you see the license error
5. Find the log file in "C:\Users\<YourUserName>\AppData\Roaming\Adobe\Extension Manager CC\Log"
Also, can you tell me whether you have any third party firewall software running that may be blocking connections to the licensing server?
Thanks for your patience with this.
Best wishes,
Fraser

How do I solve a 150:30 Licensing Error?

I recently upgraded my OS and now CS4 won't launch. It gives me a "150:30 Licensing Error." How do I resolve this? Thanks.

The easiest way is often to uninstall, re-download the software and re-install from scratch.
Download and Installation Help | Download and Installation Help

License Error in WSRP Producer

I am evaluating WSRP Producer with AL .NET Accelerator. When I try to register my instance of WSRP Producer in SharePoint using WSRP Consumer web part, I get the following error. I have confirmed that C:\bea\license.bea exists and confirms a proper evaluation license. Does anyone know what could be the problem? Thanks in advance.
Recommendations follow:
Missing, invalid, or expired license for AL .NET Application
Accelerator-1.1-WSRP Producer.
RECOMMENDATION: Please make sure the license.bea file in the BEA home
directory contains valid license entries for this
product/release/component.
More Detail:
WSRP Producer: license error, license sessions validation failed!
FATAL: Missing, invalid, or expired license for AL .NET Application
Accelerator-1.1-WSRP Producer.
Recommendation:
WSRP Producer: license error, license sessions validation failed!Here are my steps:
1. Install ALDotNetWSRPProducer.exe
Using default local IIS website
2. Install ALDotNetPortletToolkit.exe
3. Create a sample WSRP Portlet in Visual Studio
3. Publish the portlet and modify wsrp-producer.xml. I added the following section under <portlets>:
          <portlet>
               <handle>finportal</handle>
               
               <url id="view">http://myserver.com/wsrp/PortletPage.aspx</url>
               <expiration-cache>10</expiration-cache>
               <supported-locale>en</supported-locale>
               <description lang="en">Login Page</description>
               <display-name lang="en">Login</display-name>
               <supports>
                    <mime-type>text/html</mime-type>
                    <portlet-mode>
                         <name>wsrp:view</name>
                         
                    </portlet-mode>
               </supports>
               <portlet-info>
                    <title lang="en">Login Page</title>
                    <short-title lang="en">Login</short-title>
               </portlet-info>
               <portlet-properties>
                    <property name="LastAccessed" type="xs:dateTime"/>
                    <property name="PreferredFormOfAddress" type="xs:string" defaultValue="Mr."/>
               </portlet-properties>
               <user-profile>
                    <item>UserProfileName/PropertyName</item>
               </user-profile>
          </portlet>---
Regards,
Victor Barkalov
Edited by vbarkalov at 05/26/2008 7:10 AM

Creative Cloud Reverts to Trial Mode
http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

XPS licensing error

Hi,
I am using saturn numato spartan board with XC6SLX16 fpga and want to configure microblaze in it. When I open I get licensing error and lcense manager is launched. I cant solve problem then.
But I can use XPS up to generating bit file.Then I get following error.
ERROR:EDK - INFO:Security:71 - If a license for part 'xc6slx16' is available, it
will be possible to use 'XPS_TDP' instead of 'XPS'.
INFO:Security:61 - The XILINXD_LICENSE_FILE environment variable is not set.
INFO:Security:63 - The LM_LICENSE_FILE environment variable is not set.
INFO:Security:68 - For more information or for assistance in obtaining
a license, please run the Xilinx License Configuration Manager
(xlcm or "Manage Xilinx Licenses".)
INFO:Security:68a - user is Vijay Hysitron, on host VIJAYHYSITRON.
WARNING:Security:9b - No 'XPS' feature version 2013.10 was available for part
'xc6slx16'.
ERROR:Security:12 - No 'xc6slx16' feature version 2013.10 was available (-5),
so 'XPS_TDP' may not be used.
No such feature exists.
Feature: XPS
License path:
C:/.Xilinx\Xilinx.lic;C:\Xilinx\14.7\ISE_DS\ISE/coregen/core_licenses\Xilinx.
lic;C:\Xilinx\14.7\ISE_DS\ISE/coregen/core_licenses\XilinxFree.lic;C:\Xilinx\
14.7\ISE_DS\EDK/data/core_licenses\Xilinx.lic;
FLEXnet Licensing error:-5,357
For further information, refer to the FLEXnet Licensing documentation,
available at "www.flexerasoftware.com".No such feature exists.
Feature: xc6slx16
License path:
C:/.Xilinx\Xilinx.lic;C:\Xilinx\14.7\ISE_DS\ISE/coregen/core_licenses\Xilinx.
lic;C:\Xilinx\14.7\ISE_DS\ISE/coregen/core_licenses\XilinxFree.lic;C:\Xilinx\
14.7\ISE_DS\EDK/data/core_licenses\Xilinx.lic;
FLEXnet Licensing error:-5,357
For further information, refer to the FLEXnet Licensing documentation,
available at "www.flexerasoftware.com".
ERROR:EDK:440 - platgen failed with errors!
My license file is attached. I have read in some forums that I can work only with Zynq devices with my free webpack license.Please suggest me a solution to use for my board with free licensing.

Hello ,
You need to contact board vendor for that information. Check out the below image and link for features with different Licenses.
http://www.xilinx.com/products/design-tools/ise-design-suite.html
--Syed
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

Error from debugger: Error launching remote program: security policy error

Hi all,
I bought yesterday the license for Iphone Developer, I'm programming
an app and would like to start testing it on my iPhone (EDGE, OS 2.1).
I'm using osx 10.5.5 on a MacBookPro, and latest SDK. Developing
and testing on simulator is ok, I followed all the procedure for requesting
certificates, downloading them, the provisioning file and dragged on
Xcode, I can see the iPhone with my provision name enabled for developing
in the Organizer view, and I followed instructions to configure Xcode to develop
on my device changing relevant options in the targets as explained online.
When I try to develop on device I get all the process, file is transferred
on device, but when launching I receive the error
Error from debugger: Error launching remote program: security policy error
Also when I try to launch the app from the phone it says there was
an error and it's not possible to lauch the app. Is that an error in my
steps configuring Xcode or is it something else?
Thanks,
Giancarlo

Never mind, I found it out, if you follow the exact guideline of apple, you will... get this error always
What you need is to make sure you have filled out the proper fields such as your bundle ID, although apple says it's auto-filled, it's not, in my case. you will need to change it from 'com.yourcompany....' to the one you set up on iphone dev site, such as 'com.toughgamer.testApp' in my case.

License recovery launcher no longer supported?

Hi, I had Creative Suite on my old computer and need to transfer it over to my new computer. Upon tranfer I receive error message: 6 that licensing has stopped working , so I have downloaded the license recovery software and when I launcher the license recovery launcher it has the error message that it can't launch because it is no longer supported. Does anyone know which is the best method to use when running from OSX 10.9?

You should just install the program from scratch on your new computer, rather than relying on an Apple transfer process which will invariably miss something and cause Licensing to stop working, as you have found.
I would uninstall all the Adobe software you have transferred, if that is possible, then run CC Cleaner, then install the software from your media or download links like you did on the old computer. If you don’t have media or download links for it, anymore, then most Adobe software is available by searching at ProDesignTools: http://www.prodesigntools.com/
You will need to activate the software with you existing serial numbers or CC-login and update it to whatever the current version is.
Adobe licenses the software to run on up to two computers and depending on the version you may be able to run it in trial mode on the new computer for a few days, before deactivating on the old computer, just to make sure it’ll work.

LMS License error only with DFM

We are getting a license error only with DFM; we already checked the license file and its showing the DFM(2.0) license is for ever. Tried rebooting the server and restarting the DFM service/Mgr daemon.
Anybody has any idea why this is happening?

DFM license popup was a pre-LMS3.0 feature used by Cisco to validate "proof of purchase" of earlier product for customers who obtained an upgrade version of the newer software (LMS 2.5/2.6).
If your original purchase was an upgrade from a previous product then you must also run the dfmValidateUpgrade.bat file located in NMSROOT\bin directory , you will need to locate the previous DFM cd and place it in the CDROM drive.
There is also a validateupgrade executable for the RME package which requires similar validation.
It may be possible you upgraded from a product that did not support DFM, in which case you do not have the CD and as such are not entitled through the upgrade license for that product.
Additionaly, here are steps to reapply your license:
Try this procedure for installing the license file.
Be sure you have the license files from www.cisco.com/go/license using your PAK number it will generate an email with the files needed.
Open a DOS shell and issue the command:
> \progra~1\CSCOpx\bin\pdterm LicenseServer
validate with
> \progra~1\CSCOpx\bin\pdshow
Go to \progra~1\CSCOpx\etc\license
NOTE: You may want to back these files up before proceeding (copy *.lic to \temp or some other directory)
Delete all *.lic files (NOTE: QPM/LMS/CUOM***.lic file should not be copied to this directory directly. If it is there, move it to some other directory)
Back to the dos shell and issue the command:
> \progra~1\CSCOpx\bin\pdexec LicenseServer
Update the QPM/LMS/CUOM**.lic file from the GUI from
CS -> Server -> Admin -> Licensing
(The LMS**.lic should be in some other directory other than
\progra~1\CSCOpx\bin\etc\licenses and must have read permission for casuser)
Close all the browser sessions and open a new browser and launch the CiscoWorks and check for the popup message.
Also notice LMS 2.6 and earlier products are no longer supported by the TAC.
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_end-of-life_notice0900aecd80532c07.html

Licensing Error 6 After Clean Installing Mac OS 10.8.

I think it might have something to do with the fact that I forgot to back up the Photoshop Elements Library and Application Support files...I can't find any of the stuff they reference in the Licensing Error 6 Troubleshooting guide.
Is there way I can reinstall the application without having to buy it again? Do I need to give Adobe some information or something?
Thanks in advance for the help.

Okay, that never works. PSE isn't a tidy package like most mac apps. The installer strews stuff all over your hard drive like buckshot, most of it in places outside where apple says programs should install things. You will need to download and run this:
http://www.adobe.com/support/contact/cscleanertool.html
Then manually delete all the bits you can find. Don't just check applications, but also hard drive>library>application support, and your username>library>preferences. (Let me know if you don't know how to find these.)
You will need to do a complete install. If you are talking about PSE 10 (which version is this, by the way?), you can download the trial and enter your serial number into that.

License error launching IDM

Similar Messages

Maybe you are looking for