Lifechat lx-3000 sides click in and out distorting audio
Upon purchasing this headset, I noticed the sound was awfully different from the last pair of these headphones I previously had. The sound was much lower in the right ear than the left ear. As I lifted the headset up the audio clicked back and was fixed.
But now, if I put down the headset or lift it up to scratch an itchy ear, the audio lowers again, and the ear muff makes a click sound. It seems if I click the outside of the right ear muff in it makes the click sound again and goes back to normal audio.
It is really irritating as I have had multiple of these headsets which have broken over the years and I have never had this problem. I can't take it back to the store I purchased it at as the faith I had in it not being faulty as they never have been so
I threw out the receipt.
What do I do, what can I do to fix it. Please help, it's really irritating...
Hi,
Meanwhile, I suggest you try the headset in another PC, then test the sound effects again, we should first find out whether this is a PC issue or a headset issue, if this is a headset issue, then you can go back to the store to replace it with a new
one if it is still under guarantee.
If this is a pc issue, then please make sure to keep the latest driver for your audio device, you can manually view the manufacture website to find the driver.
We can also check the following link and see if anything\software\driver we need for the headset.
http://www.microsoft.com/hardware/en-us/downloads
Yolanda Zhu
TechNet Community Support
Similar Messages
-
Does new Premiere Pro CS 5.0.2 update solve hangup when clicking in and out of Premiere Pro?
I originally ran into the problem with Premiere Pro CS 5 (as part of the Production Premium CS 5 package) whereby on large projects, particularly with P2 media, Premiere Pro would hang up every time you clicked in and out of the application. What I mean by this is when you click your desktop or explorer or some other application, outside of premiere pro, and then you try to go back to premiere pro and click inside the application to get back to work, you get a blue wheel and it takes 10-30 seconds before premiere pro will re-engage and allow you to work.
I have installed the new 5.0.2 update and tested it on my original problematic project, having set up a new media cache file. The project prpro project file size is approx 30 mb and the reference media is approximately 300 GB on internal hard drive. The full data on the original problem,specs and tests can be found on this form at
http://forums.adobe.com/thread/639220?tstart=0,
Unfortunately, in my initial work and test with this as of today, this problem is not solved and the same hang up is occurring. When testing I have all other applications turned off, no internet connection and no firewall/anti-virus programs running (system mechanic).
I will be working extensively over the next few days with a new editing project and will reduce the project size and will report back if there are in fact any improvements or changes to this, but at this writing, this problem is not solved for me unfortunately. Possibly for others there is an improvement.You know what it didn't work for me - but - and I only discovered the solution last night by happenstance - I wasn't trying all that hard to solve it as it wasn't as bad for me as apparently it is for you and others - but - anyway - for me the solution was my anti virus - I had it turned off when I installed the update - so once it was completed it appeared the problem had been solved by the update - but - then I turned the anti virus program back on - Avast free version BTW - and the problem was back - it was then I happened upon your thread and obviously I put two and two together - so - continuing - I have just now uninstalled Avast free version and installed AVG free version and - viola` - all is good - for now. Sorry to hear you are still suffering.
That has been my only nagging issue thus far with CS5 - all else - so far so good.
Best wishes, -
Hi all
I have a read-only calculated field, and I want to build actions on it, dependent on what the answer to the calculated field is.
I have used action builder, and it works, but only if the form filler clicks in and out ("exits") the field, which they didn't have to enter in the first place, because it populates as a result of a previous script.
To be more precise, The questions asked before this field are:
Date of submission (submitdate):
Date of event (eventdate):
Calculation occurs (days between event and submission), and answer is populated in a field called 'daysbetween'
Now I have a set of conditions:
If the daysbetween is < or = 14, then I want a message to come up saying ineligible to apply
If the daysbetween is >14 and < or = 28, then I want a message to come up saying a fast track fee will be applied, and I want the fast track fee box to be populated, and I want the fast track fee box to appear.
I used the action builder to get all of this to work, except that it only works if the user then clicks in and out of the 'daysbetween' field, which they shouldn't have to, because it's already calculated for them
I feel like I have to put this script in an earlier field...but I don't know where - action builder won't let me do it in the 'eventdate' field
Thanks in advancePut a shift register on the border of your loop. Have a case statement that contains the "Get time" function in one case of the case statement. Make that case = 3 and wire the loop iteration to the case selector. Have the time value loaded onto the shift register in the "2" case (interations count from zero), have the shift register passed through on all others ("Default"). Then subtract this time from current to get elapsed time. You probably want to put the subtraction/comparison in a "sub-case" in the "default" that only is valid for interations > 3 or you will get some really ugly "times" until the shift register is loaded, or you could initialize it from outside the loop with the time, but this will cause it to show elapsed times from the beginning that suddenly jump back to a low number after iteration 2.
P.M.
@ Corning? Which one? I was doing LabVIEW at Corning back in '96
Message Edited by LV_Pro on 09-23-2005 10:07 AM
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Attachments:
elapsed time.vi 24 KB -
Since downloading Yosemite 10.10.2, emails are not automatically downloading. I have to either click on Get Mail or click in and out om mailbox.
It's very frustrating as it does not happen on my iPad or Iphone.Howdy welcon,
It sounds like your Mail application is not checking for mail automatically anymore after updating to 10.10.2. It seems to me that the setting for this may have reset, or changed at some point thereafter so I would check the preferences for the Mail application:
General preferences - Mail Help
Check for new messages
When Mail gets new messages from the mail server. By default, the option is set to Automatically (Mail varies how often it gets messages, based on whether your Mac is plugged into an electrical outlet).
An IMAP account may get messages more frequently if the mail server supports the IDLE command; make sure the option to use it is selected in the account’s Advanced pane in Mail preferences.
If you set the option to Manually, click the Get Mail button in the Mail toolbar to check for messages. (Whenever you click an IMAP or Exchange mailbox, it syncs with the server, and shows new messages.)
Thank you for using Apple Support Communities.
All the very best,
Sterling -
X1 Carbon Gen3 (2015) Chassis constantly clicks in and out of position
It's been 1 week since I received my first Lenovo Laptop - X1 Carbon Gen3 and I'm very pleased with it so far. Since the beginning I noticed a 'clicking' sound produced when resting my palms on the keyboard to type, but couldn't figured out what it was. Today I took a closer look and discovered that the bottom chassis (front corners) is being pushed in and out its position, creating this 'clicking sound'. It almost looks like the screws were not properly tightend so they do not allow any flex between the bottom chassis and the body of the ultrabook. I tried tightening the screws, but it seems like they are fully tightened, so there isnt anything I can do about it. I performed a research and found one more user complaining about the same issue here:http://www.reddit.com/r/thinkpad/comments/30a5rz/i_have_a_touch_and_a_nontouch_qhd_x1_carbon_3rd/ I'd like to know if anyone else has experienced this issue and how its best resolved. Many thanks, Chris
I have the same problem (hope to soon being able to say "I HAVE HAD that problem"...) I was very, very disappointed and very annoyed to see that this overly expensive business laptop which I paid +3K USD for not (even) had the same build quality as a simple Macbook consumer laptop, therefore a couple of days ago I sent my X1 gen3 for repair to fix the squeeking and flexinq bottom cover, and hopefully the Lenovo repair center has swapped either the bottom cover or the screws. I must say that it is really embarrasing for Lenovo to charge a premium for a Laptop with such a lousy bottom cover fit..I mean, honestly, where is the quality control...? Anyway, as soon as I get it back after the weekend I will post an update about the results of the repair.
-
Set desired in and out of audio video in menu...
Sorry - so basic but can't figure out - how do I set the in and out point for audio playing during the menu and the video that is being viewed in the menu? Thanks!
You mean using Motion eus? Look Motion Menu up in the manual for the details. It's not intutive. You select the button and then open the inspector and you will see a media tab where you can set the in point. You cannot select the outpoint since Motion Menus are 30 seconds by default. Adjusting the loop point for the entire menu is described, confusingly, in the manual.
bogiesan -
hi hope somebody can help me before i launch this thing at the wall!!! i have had no problems with my imac before but all of a sudden my mouse has taken on a life of its own.
its zooming in and out side to side all over the place when i'm not even touching it. yet when i want it to zoom in and out now it dosnt even acknowledge my tapping and swiping. (its actually zooming in and out as i'm writing this!!!!!
when i click on anything instead of doing what i want it do do it brings up a sub menu?
i have a feeling when my baby smacked the keyboard, it may have something to do with it but i have since gone into the mouse settings and made sure all the boxes are ticked etc.. has he broken my mac? :/Original comment deleted by author.
Please do not repeat problems over multiple threads. -
After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
THis also happened with my old iphone 4s
I need help!Hi loist,
Thanks for visiting Apple Support Communities.
If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
I Have an iPad mini, iOS 8.1. When I'm on my iPad, it keeps going in and out of random apps. Going to settings is the worse. As soon as I click settings and it opens,it starts clicking different things and tries turning on and off settings! In Facebook, profiles and status get clicked. The screen zooms in and out multiple times. It reminds me of when you call the help desk for a computer or a computer at work and they gain access and move around clicking and you're doing nothing. Basically things are being clicked and I'm not doing it.....can anyone help?
At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
Here are the links, and the last one pertains to the reset to factory default condition ...
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can giveUnless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40. -
Slow screen redraw when I click playhead and zoom out
The arrange mode is slow to redraw when I click the playhead and zoom out. The slider thingy at the bottom of the screen works totally fast like normal. I just upgraded to Logic 9. Might this be a known problem or is it coincidental? Any tips?
Thanks for your reply.
I am using Logic 9.1.1. on Snow Leopard. Upon installing Logic 9 recently, I noticed that the seemless screen redraws ( from extreme close up to extreme zoom out) takes over five separate attempts. it's like there's only so much video power to do it one shot like I used to.
To be clear, let's say I'm very zoomed into a region editing an vocal comp track. Then I want to zoom out to see the whole project from start to finish. I click the playhead in the global tracks area. Then I push up and it shrinks the project to fit the screen. The problem is that it only goes so far before I have to release the mouse where it is and then try another run at it.
Here's a self-answer:
My feeling is that Logic has made it a more exacting science of how to manipulate the zoom in and out with the playhead. I actually feel it's faster now, you just have to stay within certain limits and not take your mouse and go too far up into the shorcuts area like I was used to in Logic 8. You have to stay within the global tracks area and your horizontal movements will be very fast actually and very smooth.
Happy music making -
I purchased a refurbished iBook G4-Version 10.4.11 and everytime that I try to purchase anything on iTunes or change something in my account, I click "done" and it says that I have timed out, when I'm on there for less than a minute. Hence, none of my purchases have gone through.What could be causing this?
You need to use a newer Mac OS X version. A G4 can be upgraded to 10.5.8(if desired, buy a retail DVD from a source such as Amazon or eBay), but you'll likely find it more cost-effective to buy a secondhand Intel Mac.
(124606) -
My ipod is damaged on the side of it and the screen is about to pop out what do i do?
my ipod is damaged on the side of it and the screen is about to pop out what do i do?
Have the iPod serviced by Apple for a flat fee or send it into a third party repair company to have them repair it for a little less. A simple Google search for iPod Touch screen repair should give you a number of results to work with.
B-rock -
I cannot "click" on the top inch of any screen when in firefox. This prevents me from signing in and out of certain webpages. If I minimize the screen this does not go away either. This doesn't happen when I am either on my desktop or using IE. I love firefox, but this is frustrating! Help!
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Maybe you are looking for
-
Ipod mini no longer recognized by itunes
Hi, I know this might sound like everyone else's problem, I've had my mini for a little less than a year now and it has worked fine but all of a sudden I can't transfer any songs as itunes wont recognize the ipod when i connect it. I have tried reset
-
i am struggling to set up mail. the system keeps on telling me that i need to connect to a server
-
Aperture Library photo folders are not updated in iTunes view
The list of photo folders in Aperture doesn't update which doesn't allow me to select them and sync with my iPad. Selecting ALL would be too many for the iPad (60,000 plus). I put new photos into Aperture 3.0 and can't get them onto my iPad. Suggesti
-
How to do pan and scan on single clips?
I have a timeline with multiple clips. I'm trying to do some pan and scan to single clips, pan and scan will be different on each of these clips. I tried to put a new "pan and scan" track, but it covers the complete timeline and I can't reduce it to
-
I am having problems downloading apps onto my iphone5 am concerned whether this is coming from my home computer as saying authorization constantly and am ready to get rid of iTunes!!!!