Lifecycle planning assignment table

Hi
In the Assignment table, when i am entering the Product number and trying to select the either Like Prfl/ PIN or P out profiles, its not happening. But I can enter the profile names manually. But unable to choose from the drop down profiles. Also the profile dates do not show up.
also, sometimes, when i am hitting ENTER on keyboard, the product number is disappearing or the whole line.
Anyone know why this should be happening ? We just upgraded our system from 5.0 to SCM 7.0.
Any hint is appreciated.
Thx
Venkat

closing the thread. Fixed by applying a note.

Similar Messages

SAP APO 5.0 Assignment Table and Like Profiles

Hello,
Is the any way to extract all the entries in either of the like profiles or the assignment table.
I tried the System -> List -> Save but all the options are grayed out.
Any feedback wold be greatly appreciated.
Thanks

Hi,
I am not sure which entries you want exactly...However there are couple of tables related to like profiles in which LIKEID is there.
/SAPAPO/DP440G- Master Forecast Profile (APO0300)
/SAPAPO/FCST_LC - Assignment Table: Lifecycle Profiles to Charact. Value
/SAPAPO/FCST_LC1 - Assignment Table: Lifecycle Profiles to Charact. Value
/SAPAPO/T445LIKE - Table for LIKE Dependencies
/SAPAPO/T445LIKK - Header Table for LIKE Dependencies
/SAPAPO/T445LIKT - Text Table for Like Profiles
/SAPAPO/T445LIPR - Table for Life Cycle Planning
I hope this will help you at some extent..
Regards,
Saurabh

Basic Settings for Lifecycle planning

Hello All,
I want to maintain the basic settings of Life Cycle Planning to use Like Profile
Transaction: /SAPAPO/MSDP_FCST1 - Lifecycle Planning
My question is; is it a must to use 9AMATNR and 9ALOCNO characteristics in our POS?
I have seen the sentence below in OSS note: 354660
**If you are using a characteristic for a product and do not want to use the 9AMATNR characteristic, you must specify the characteristic you would like to use.The 9AMATNR characteristic must exist in the planning object structure if you want to use it as a characteristic for a product.Only then can a LIKE profile be used.In this regard, see the information on the /SAPAPO/FCST_LIKE user parameter in note 350065.**
What I understand from this sentence is that 9AMATNR is not an obligatory characteristic to use in POS for the purpose of life cycle planning.
However when I do not use 9AMATNR I receive such an error message during the maintenance of Basic Settings for Life Cycle Planning.
*Errors have been found in your Customizing settings
*For detailed information, see consulting note #354660
*The basic settings cannot be saved
*Characteristic for product 9AMATNR is not in the planning object structur
So, does anybody know if is it a MUST to keep the 9AMATNR in the POS for lifecycle planning? May be I am doing wrong something else...
Thanks in advance

While in DP MPOS you are free to choose custom characteristics for location and product, there are certain DP functionalities like Promotion Planning which normally uses 9AMATNR as characteristic for Product. In such cases the DP MPOS in absence of 9AMATNR has an issue. Through this assignment of location and product in the MPOS, system knows the custom characteristic that needs to be mapped to 9AMATNR and 9ALOCNO for product and location.
This is useful during release from DP to SNP also.
Hope this helps.
Thanks,
somnath

Error Lifecycle planning Basic settings

Hi Gurus
i got an error when iam creating Life cycle planning Basic settings
Error Detail Message-
Analysis of the lifecycle planning customizing setting
errors have been found in your customizing settings.
The Basic settings cannot be saved
Characterstic for product 9amatnr is not in the planning Objce structure.
For detailed information, see consulting note #354660.
we are using Z9amatnr character for product, Plz kindly provide the solution what is this error how to resolve, as iam new to the APO.

Hello,
The above is the general solution for this error.
Could you please check again that the below settings?
1)In /SAPAPO/MSDP_ADMIN, the characterisitc assignment as Product
2)In /SAPAPO/MSDP_FCST1, the charactersitic specified as Product
They should be the same characteristic, and should be your customizing characteristic instead of 9AMATNR.
Best Regards,
Ada

Problem with Exception Worksheet using Data from Supply Plan Data Table

I added a series for a flag that indicates whether product is sourced from multiple manufacturing sites for a given customer and item. The flag is on the supply plan data table because it depends on the scenario. I created an exception worksheet for when the flag is set but all combinations are being displayed. If the flag is not set for a given combo then "Selected Page Item has No Data" is displayed in place of the table. I want only the combinations that meet the exception to be shown. I tried setting up an exception worksheet for customer shipments which is also on the supply plan data table but saw the same issue with all combinations being displayed whether or not the condition is met. Does anyone know of any issues with using exception worksheets with the supply plan data table? I searched the documentation and saw that exceptions behave differently with promotion series but this isn't a promotion.
I'm using Demantra version 7.2. Thanks for any help!
Edited by: user9253208 on Mar 30, 2010 6:40 AM

Thanks. We have come up with a workaround. While the combinations on the left are not affected by the exception, the data in the main table is so we moved as many levels as possible into the table. The performance is slow but the data is more useful, especially when exported into Excel. I was hoping for a better solution but I guess we'll just have to stick with what we've come up with.

Problem in Assigning table to access sequence

Dear All,
i am facing problem in assigning table to access sequence for billing output type.
I have created 1 table B902 with the combination of Sales org,plant ,Division,Billing doc type.
but if i am going to assign with access sequence system is taking for Billing type & division & for other its showing red marks & errorr.Access sequence->Aceessess->Field.if i am clicking on field in I/O column for plant its displaying negative.
bcause of this i am not able to make condtion record.
Message is Select a document field for WERKS
Regards
ajit
Edited by: SAP SD AJIT on Mar 1, 2010 3:18 PM

Hi SAP SD AJIT ,
Go to IMG --> Sales and Distribution --> Basic Functions --> Output control --> Output Determination --> Output Determination using condition technique --> Mantain output Determination for billing document --> Mantain condition table, in the pop-up choose the option "Field catalog: Messages for billing documents", there you can add standard field into the catalog, so you can add WERKS and the other one "document structure" I don't know what field it is, but if it is and standard field you can add it. If you have a Z field you need ABAP help to add the Z field to the structure "KOMKBZ5" and then you can add it to the catalog.
Regards,
Mariano.

SRM 7.0 Add Fields in Account Assignment Table

Hi SRM Gurus,
I am working on SRM7.0.
I want to add two fields in Account Assignment Table in Account assignment tab of Shopping cart Item.
I can do it using WebDynpro Enhancement framework , i.e.
1) Create an append structure for Structure INCL_EEW_PD_ACC_CSF
2) Enhance WebDynpro Component : /SAPSRM/WDC_UI_DO_ACC - Component controller node
3) Map this with View V_DO_ACCOUNTING Node
4) Create the necessary Table Columns and Column editors in Account Assignment Table
However i think using SPRO configuration and enhancing few structures also this can be achieved.
Can anyone guide me on how can i achieve it without creating WebDynpro ABAP Enhancement?
Regards,
Ashish Shah

I've never done it with account data, but yes with header and item.
I think in this case you need to add these fields in SPRO:
SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Extensions and Field Control (Personalization) --> Configure Field Control --> Configure Control for Fields of Substructures --> Metadata for Fields of Substructures and Table-Like Enhancements
Adding the fields with "Set Type" = 31 Accounting...

Planned orders table/report

Hi all,
IS there any table/report which lists out the Planned orders and the converter Purchase requisitions from planned orders? I want a report/table which lists out Purchase requisitions and the related Planned orders.
Thanks,
Avani.

Hi,
no standard report for your reqirement
pls check planned order table
PLAF - planned order table
once converted planned to pur. req, there is no table to store this converted data
EBAN - Pur. req table
Hope you understand
Regards,
Sankaran

Tcode for setting FI-SL planning: Summary table name

can any body suggest Tcode for for setting FI-SL planning: Summary table name.

Hi,
Check Tcode : GB01.
CHECK THESE ALSO,
GLPLINST.
GLPLINSTALL.
THANKS,
REWARD IF HELPFUL.

APO DP - lifecycle planning

I am using APO DP V5.
I am forecasting at a monthly level, then performing time based disaggregation down to weeks.
So, when performing forecasting using lifecycle planning, the 'phase in'/'phase out' profiles are of course working at a monthly level.
But in fact I want to be able to model the 'phase in'/'phase out' <u>within</u> a month, ie at <u>weekly</u> level.
So, for example, suppose at monthly level, the 'phase in' results in a forecast qty of 0 for month n, and 100 for month n1. But in month n1 I actually want to see quantities of 25, 50, 75, 100 at the weekly level.
Any ideas about how I could do this? I'm thinking about careful use of time based disaggregation factors for instance.
Thanks, Bob Austin, Atos Origin

I would suggest you to havetwo Data views -one in Month and the other in Week. You can have two Forecast Profiles, that are defined that works on weekly and monthly levels. The former can have LC active and the latter may not. These two profiles will create monthly and weekly forecast keyfigures respectively. While doing time disaggregation of monthly forecast keyfigure, use the weekly forecast keyfigure for disaggregation.

Error number assignment table pointer (no.range object HRTABNR) - LSO_PSV2

Hi ALL
On LSO_PSV2, when i create a course:
Error number assignment table pointer (no.range object HRTABNR)
Any ideas?
Thanks in advance
Sony

Hi Sony,
Please go to SNUM t-code and make sure there exists an interval for object HRTABNR.
Regards,
Dilek

Internal assignment table that maps the ERP & CRM Partner ID's

Hello Experts,
In CRM-ISU integration,
If we are maintaining different number range, in which table its maintaining the details of both Business PartnerID's
or how they link each other?
In one document i read this statement.
"There is always an internal assignment table that maps the ERP business partner ID to the corresponding CRM business partner to ensure a consistent data exchange."
thanks in advance,
Sreejith

HI,
In CRM there is a table BUT0ID which stores the ERP business partner ID as ID Number against CRM business partners.
Pass the CRM BP in the Business partner field to get the ERP BP number in the ID number field.
Regards,
PP

Assigning table entries to a transport request

Hi,
How can I assign table entries to a request after I have created them?
Regards,
Vinod.

1. Use SE09 to
   Either create a new workbench request
   or goto the old request (Objects Tab)
2. Press Edit button
3. Enter the following in the row:
   Prog Id = R3TR
   Obj Type = TABU
   Obj Name = MyTableName
   Then Press ENTER
4. A Key Button will come on the Right column.
    Press it. A New screen will come.
5. In table name enter : MyTableName
    In Table Keys enter : KeyFields*
    Save the request and transport.
I hope it helps.

How to assign tables to field-symbols

how can i assign tables to field-symbols

Hi Raj,
Declare a fields symbol of type table, see below syntax:
FIELD-SYMBOLS <FS> [<type>|STRUCTURE <s> DEFAULT <wa>].
and then create an internal table and write the below code;
ASSIGN itab to <fs>.
Refer below eg:
TYPES: BEGIN OF line,
         col1 TYPE c,
         col2 TYPE c,
       END OF line.
DATA: wa TYPE line,
      itab TYPE HASHED TABLE OF line WITH UNIQUE KEY col1,
      key(4) TYPE c VALUE 'COL1'.
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
ASSIGN itab TO <fs>.
also see below link:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb387a358411d1829f0000e829fbfe/content.htm
Regards,
Sunil

Assign Table Maintenance to custom tran

Hi Experts,
I created table maintenance and assigned to ztransaction using se93.
in which selected parameter transaction.
but when i am execting ztransaction giving error.
could you explain   how to assign table maiantenace to ztran.
Thanks,

Hi,
GOTO SE93. Enter the transaction code and press create button. Choose the button "Transaction with parameters".
In the transaction give SM30, check skip the initial screen button.
Then in the screen fields enter the following values.
Name of the screen field       value
VIEWNAME                       ZTABLE
UPDATE                          X
Thanks,
Naren

Lifecycle planning assignment table

Similar Messages

Maybe you are looking for