Lifetime support reality with products on top of iAS 10.x

according to Oracle Lifetime Support
Policies, Oracle is due to deliver "Software and Operating System Updates,
Security Alerts, Integrated Software Updates and Patches [and,
among others,] Critical Patch Updates".
So far the theory. But what if you are running a product that is
based on, e.g. iAS 10.1.3.4? Sustaining support means no CPU
patches, and thus, you are running your Oracle application with
potential loop holes in the middle tier.
Comments welcome, Thomas

Hi,
Oracle releases quarterly security patches for it's products to take care of security vulnerabilities like the one you have mentioned. These patches are known as Critical Patch Updates or CPU patches. These are released in January, April, July and October of every year and for almost all Oracle products that may have the security issues. Currently the latest CPU patches are from October 2014. So I would request you to apply the latest CPU patch for Oracle Application Server. However note that the latest CPU patches are only released for the latest product version in a particular release line. In this case the latest application server version is 10.1.3.5 in the 10gR3 release line. So the October 2014 CPU patch for Oracle Application Server 10.1.3 is only available for version 10.1.3.5. However, I see that you are on version 10.1.3.4. So before you can apply the latest CPU patch you will need to upgrade the application server to 10.1.3.5 by applying patch 8626084. Then, once the application server is upgraded, you can follow Note 1912224.1 (Table#91) to find out the October 2014 CPU patches for application server 10.1.3.5.
Also, because of sensitive nature of security vulnerabilities as a policy Oracle doesn't disclose any specific details regarding any specific vulnerability and hence the general solution is to apply the latest CPU patch available for that product. Also, note that most security scan tools only go by the version of the product. In this case it will only go by the underlying Apache version in Oracle Application Server 10.1.3.x. However in case of Oracle products, even after applying the latest CPU patch, the version doesn't change i.e the underlying Apache version remains what it was before applying the CPU patch. And hence it may happen that even though latest CPU patch actually fixes the security vulnerability but subsequent scans may show that the vulnerability still exists because the version is still the same.
Regards,
Prakash.

Similar Messages

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Is there any tech support for Neo4 products?

One of the reasons I'm watching this forum is to see what kinds of problems I might end up with my Neo4 Platinum since I found out that MSI support of their products kinda sucks (not to say any other any other OEM is any better) This system I just built started out with a MSI X800 Pro PCIe (thought I wouldn't have any compatability problems since both were MSI products) that ended up being sent back because of a bad GPU. It did install ok but had garbage on the boot screen and wouldn't run any 3d programs. I tried to update the Bios on it and liveupdate wouldn't recognize it for bios update or driver updates. When I called tech support on it I was informed that none of the MSI X800 Pro PCIe cards are recognized as MSI products. I also asked why liveupdate does not show any driver updates for the motherboard drivers (I also have a KT6V that shows all the MB driver updates even when they have been updated) and I was informed that none of the new motherboards will show driver updates if they are current on the board. Problem is that my realtek drivers are updated and they still show up on liveupdate.
I also have a hard time buying the statements made on this board that the forums are not part of MSI support. The Forums are not shown as an outside link but are listed under Service for MSI products and if you go to the Sevice page under the discription for the Forums it states that "You can also post a message there to get help." and yes I did read the forum rules where it states that "There is no MSI support to be found here. The moderators are not paid by MSI and do not work for MSI, we are users just like you." If everyone posting on these forums are just users helping each other, then wouldn't it be better just to state that the boards with SB are not compliant with the 24 pin connectors and that you need a PSU that is backward compatible to 20 pin specs?
This "rant" of mine is not meant to be a bashing of MSI products since I haven't found many other OEMs that are any better in their support but is intended to help present and future users of MSI products and since I hope I'm using this forum as is intended by the "rules" can anyone who has a K8N Neo4 Platinum let me know if they are having a problem or know of a problem with the AMD 3500+ (winchester) voltage never reaching 1.4 volts on this mb? If the manuals for the mb and my psu are correct I have a dedicated 12 volt rail for the cpu with 15A. The cpu voltage stays around 1.37 on CoreCenter and 3 other programs that monitor cpu voltage even when running Prime95 with 100% cpu usage.

The default for CPU Voltage is By CPU VID default for Adjust CPU VID is Startup which should be 1.4 volt. Since Cool'n'Quiet requires a driver to run and I also show low CPU VID in cmos it should be 1.4v but I tried with Cool'n'Quiet disabled and also tried setting CPU VID to 1.4 but have never made it to 1.4 I also tried setting it to 1.425 which is the next step and still read under 1.4.

Still no full retina support, even with the new CC Apps?

Hello over there!
I just bought the full CC abo, after trying PS and Indesign and becoming a fan of the new workflow, that is possible with the upcoming new CC Apps (Muse, Edge Tools...).
Now, after getting things right and downloading the needed Apps to my Macbook Pro (15" Retina) - I was very disappointed. The updated CC version of Dreamweaver and even some of the completely new Apps still have blurry text fields and buttons/layout graphics in it. Acrobat Pro XI is still a laggy, blurry fail on retina. The Mac OS Preview is sharp and scrolls a 600 pages PDF in seconds.
I mean... Srsly? This would be okay if the retina MBP came out last month. But it came last year. I'm really a big fan of the Adobe workflow and functionality, this is why I upgraded and decided to spend some hundreds of dollars for it ( and become friends with the new and scary rent model ). But the best program is a pain, when your eyes start being overly stressed after 20 minutes of work, especially when you're already looking at hundres of code lines (And I'm 21 years old, so I'm glad to still have those good working eyes..). I remember when I fell totally in love with Dreamweaver because it was able to handle the amount of information in a good stucturized and clearly visible way. But the only really sharp and "look like it fits all together"-Apps are PS, AI and ID as far as I tried for now.
Definitely affected are: DW, Muse, Edge Animate and Reflow (What? They are new!?)
So, thats my question: Are there any official statements that this will be fixed? Im confused because Adobe is just partying about the retina-compatibility updates last fall/winter in blogs and descriptions. The blurry App elements are not mentioned. I really want to know this, to be able to take back my contract and abo in time and get a refund. Would be sad, but the only option to me.
Thanks very much for reading and helping in advance. I really do not want to troll or sound agressive. The Adobe Suite is a very very big product and it does very good. But I'm simply disappointed about the handling of retina support, which is essential for users like me.
English is not my main language, I hope everything was clear.
Best regards,
D. Fuchs

Hi David,
thank you for your effort. If I remember correctly you said you’ll also hand through this issue/question to the tech guys. Does this mean I’ll get further information? Because this article you found is about 10 month old and I’d like to get this issue verified.
Furthermore, Acrobat (XI) is not even mentioned in that article and this is what brings the most problems.
I really don’t like to be a stressing customer, but I think a official answer to this issue is definitely possible und should be made.
I’ll attach a few hardcopy pictures of the issue. Don’t know if it helps, but it proofs.
Thanks again and best regards,
D. Fuchs
Am 25.06.2013 um 01:17 schrieb David__B <[email protected]>:
Re: Still no full retina support, even with the new CC Apps?
created by David__B in Adobe Creative Cloud - View the full discussion
Hi D.
I found this http://blogs.adobe.com/creativelayer/new-macbook-pro-retina-display-su pport/
I believe has been added to Photoshop, Illustrator and Lightroom so far. Hopefully it will be added to Dreamweaver soon too.
Kind regards,
-Dave
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5445698#5445698
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5445698#5445698
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5445698#5445698. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/message/2936746#2936746.

Is there any customer support for this product?

I have a client who has sent me two documents. When I log on using my Adobe ID it says
the Document could not be found because of one of the following reasons:
* Document was rejected by one of signatories
* Document was cancelled by initiator
* Document was deleted by initiator
* Document has expired
My Adobe ID is not the same as the email I use everyday and I don't see a place to add additional emails. Now I have three Adobe IDs
How do I contact Customer service or tech support for this product?

Yes, this is exactly what I'm wondering too. Without it, we can't build any apps that download content without the risk of the content being deleted.
Here's the background before Apple introduced the new "do not back up" attribute:
http://www.marco.org/2011/10/13/ios5-caches-cleaning
Fortunately, Apple addressed it after that blog post in 5.0.1. See bullet #4 here, quoted below
https://developer.apple.com/icloud/documentation/data-storage/
Q: My app has a number of files that need to be stored on the device permanently for my app to function properly offline. However, those files do not contain user data and don't need to be backed up. How should I store those files in iOS 5?
A: Starting in iOS 5.0.1 a new "do not back up" file attribute has been introduced allowing developers to clearly specify which files should be backed up, which files are local caches only and subject to purge, and which files should not be backed up but should also not be purged. In addition, setting this attribute on a folder will prevent the folder and all of its contents from being backed up.
Important: The new "do not back up" attribute will only be used by iOS 5.0.1 or later. On iOS 5.0 and earlier, applications will need to store their data in <Application_Home>/Library/Caches to avoid having it backed up. Since this attribute is ignored on older systems, you will need to insure your app complies with the iOS Data Storage Guidelines on all versions of iOS that your application supports.
Now we just need Adobe to support the attribute in the AIR SDK. What do you say Adobe?

I have an HP Photosmart 7510 & cannot connect by WiFi, I have tried the support fix with no success.

Hi
I have an HP Photosmart 7510 & cannot connect by WiFi, I have tried the support fix with no success.
I have tried the suggested from below;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=uk&dlc=en&lang=en&lc=en&product=507...
I have not tried to assign the static IP address suggested in step 6 on the web link above, I am not that technical & do not fully understand how to perform this task & am surprised HP expect retail client to follow this, if is a bit technical I think you must agree.
Anyway, the WiFi or Wireless blue led is blinking.
If I try to discover my wireless network, it is not displaye like it used , nor are my neighbors, my mobile Samsung Galaxy S displays my network and my neighbors when the phone in placed by my 7510.
When I try to enter the SSID & key, my 7510 times out without connecting to my router.
My pc is connected directly to my router (Buffalo) and I use a Fujitsu Desktop running Win 7 32bit.
By the way, I have done a "Factory reset" to my 7510 & this did not help at all.
Can anyone help?
Is my 7510 faulty?
Thanks in advance.

I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.

Does it have a feature that supports management with accounts, fixed IP, VLAN ?

I'm not quite familiar with those advanced features if it does exist as the fact that i've been primarily using cheap and unknown AP products for years :D I'm planning on upgrading my APs for personal reasons. Could anyone tell me does it have a feature that likely supports management with accounts, fixed IP, VLAN? What is it called and which product could fit my needs?
Thanks.

My name Eric Moyers. I am an Engineer in the Small Business Support Center.
Thank you for the question. Currently all of our Small Business Wireless Access Points support Management accounts, fixed ip's and vlans.
Here is a link for some model comparisons.
http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html
http://www.cisco.com/c/en/us/products/wireless/small-business-100-series-wireless-access-points/models-listing.html
http://www.cisco.com/c/en/us/products/wireless/small-business-300-series-wireless-access-points/models-comparison.html
http://www.cisco.com/c/en/us/products/wireless/small-business-500-series-wireless-access-points/models-comparison.html
If you have any other questions or some specific questions, I am most happy to answer them. You can repost here or if you mouse over my picture you will see my email and can email me directly.
Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered.

Do I have to use the TC wi-fi and can/will TC support all my products?

Looking at purchasing a TC. I currently I have an iMac, two Macbooks, a PS3, a Xbox 360, a Wii, a iPod touch and two iPhone 4 on my wireless network running a Linksys router. 1. Do I have to use the TC wi-fi for my home network? 2. Can I just use the TC for wireless backup? 3. If I replace the Linksys router with the TC will it support all my junk? Thanks!
Message was edited by: ecksray

Do I have to use the TC wi-fi
No
and can/will TC support all my products?
Can you tell us what products you have?
What function do you want the TC to perform?

Global ATP with product allocations and SD returns

Dear all,
We have been setting up an implementation scenario with an ECC 6.0 and SCM 5.0 system which verifies SD orders versus SCM product allocations.
With SD orders and SD contracts everything works fine. But we have a problem with using SD returns (same material and plant used like the SD orders): We would expect the system also to check the returns for product allocation quantities but it seems that the SCM availability check does not enter the product allocation procedure at all (we have some user-exits in use but these are only accessed when we go via SD orders, no access at all for SD returns).
Is there any special setting which we have to activate in order to have the SD returns properly processed with product allocations? (Customizing "Set the Transfer of Returns to SAP APO" within ECC is activated) The system somewhere gets stuck during the check within the SCM system.
Thanks for providing assistance regarding this matter.
Kind regards,
Klemens

Hi folks, did you resolve your issue here? I assume what you are wanting is for the Returns order to free up allocations qtys that had previously been consumed by the originating sales order, that is, incoming orders qty should be reduced by the amount of the returns order. I know that when a sales order line item is rejected the incoming order qty is reduced, but I'm not sure it is possible for a returns order to do this.
ATP Man, are you saying that as category BZ is not supported by Allocations that it is therefore not possible for the Incoming Orders Qty to be reduced by a Returns Order? I have a business reequirement to do exactly that.
If it is not possible to do this through the automatically via the ATP check, the only way I can think to address this, would be to try and transfer the Returns qty to SCM after the order is saved and then to have a macro that reads the returns qty and reduces the Incoming Orders qty by the qty of the return.
Paul.

Does Kodo 4.1 support embedded with the owner-field attribute?

Does Kodo 4.1 support embedded with the owner-field attribute?
My investigations so far say no, that it is infact ignored. This is a very serious problem for the project I am working on.
Please proove me wrong...

A lot of it stems from the large and complex nature of the models we employ. Hardly a week goes by that we don't grind to a halt due to a bug in jpox. That then leeds to the thorny problem of trying to discuss the problem on the jpox forums, where there are basically only two members that know the product well enough to help... Net result, they are overwhelmed, and from one of them it comes across in the rudeness of replies. This puts people off, including us.
I contrast this with the Hibernate and Spring communities, which I have personally been involved with and found to be both thriving and rewarding.
A bit of QA and respecteful support will be wonderfull. We are happy to pay a company for that because of the man hours it saves. I sincerely hope that Kodo JDO works out for us.

Pop up with nothing on top

how do i make a pop up with nothing on top (the part with the
file and edit button, or the refresh stop buttons)

Use DW's Open Browser Window behavior?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"franco714" <[email protected]> wrote in
message
news:eeknqt$8r4$[email protected]..
> how do i make a pop up with nothing on top (the part
with the file and
> edit button, or the refresh stop buttons)

Place one order with Products from different sales orgs

Hello,
We are in CRM 7.0 EHP2 connected to ECC 6.0. We have Internet
sales/Webchannel Application.
We are rolling out Internet sales for a new country but they want the option to
place one single order with products from different sales
organizations.
Currently Customers send fax/email to customer
representative(CR) with list of products. The CR identifies and places
multiple orders if products belong to different sales orgs.
Currently customers don't have idea about sales orgs and they don't
have a clue which product belongs to which sales orgs. So, for them to
use Internet sales, we have to provide them an option to place one
order with products from different sales orgs.
I understand SAP doesn't support this. But, is there any way we can achieve this through some custom/out of the box solutions?
Thanks,
Ravi

Hi Ravi,
Please have a below help link, it may help you to explain the role of Distribution Channel and if it fits to your requirement.
Organizational Data Determination in CRM E-Commerce - E-Commerce - SAP Library
Thanks,
Hamendra

ChaRM in QA system after QA refresh with production

Hi,
After deploying ChaRM, if we refresh QA system with production server, would the projects be overwritten?
or Is there a way to perform system refresh without affecting CTS projects in QA?
Thanks and Regards,
Jamuna Nithyanandam

What do you mean with "Delta transports"? I assume, delta transports contain those objects which were not moved to production, only to QA, and therefore the are now missing in QA after system copy.
CHaRM process supports to move all changes controlled into Production, by using normal corrections (transaction type SDMI). So there should no delta transport be required. If something was in QA and not on Production, when you perfromed the system copy, you can use test transport functionality, to re-import these missing transports into QA.
Regards,
Holger Slomka

Service Manager 2010 lab environment syncing with production database

I am trying to setup a lab environment for SCSM 2010 to test the upgrade to SCSM 2012. I have been following the instructions found here:
http://technet.microsoft.com/en-us/library/hh914226.aspx
I have successfully made it to step 16. However, when I open the SCSM console in the lab environment it still shows the Data Warehouse and Reporting buttons. When I create a new ticket in either the lab or production environment it shows up in both consoles,
even though the production console is connected to the production server and the lab console is connected to the lab server.
Any ideas on why the lab environment is still syncing with the production server?
Thanks

Thread of the Necro-Dancer:
Regardless, the step Katie was apparently implying (but seems to be missing from her description) is the bit where you backup the database and restore it to a separate instance. after this is done, you can then install a new management server targeting this
new instance, and then promote the new management server to the workflow server, and run the isolated database using the new management server.
i would recommend, however, that you use
the supported method of producing a upgrade lab with production data, which is very similar to the method Katie implied, includes directions covering all of these steps involved, and allows you to periodically restore production data to the lab database
with minimal overhead.
I didn't notice the date before now. I just look at the latest unanswered posts, so not sure how I got into this one. But technet has been acting weird lately. I get an internal server error far too often.
http://codebeaver.blogspot.dk/

Lifetime support reality with products on top of iAS 10.x

Similar Messages

Maybe you are looking for