Lightroom 2.5 Synchronizing Issue - Stops at 30%

We updated to Lightroom 2.5 a couple of weeks ago and had no issues, until today. When we try to synchronize any folder (network folder), it stops at 30% and just sits there. The Synchronize button is still grayed out so we can not hit it yet. This is happening on all 3 network folders on 2 computers with lightroom. We have tried rebooting everything already.

After letting lightroom just sit for a long time (half an hour or so), it advanced and let us synchronize.
There have been no issues in the past. Adobe does need to learn how to make their software work inside of work environments (ie. networks).

Similar Messages

Synchronous message stops at inbound channel response

Hi,
We have an outstanding issue in PI where our synchronous messages stops after receiving the response from the Receiver system. This is an ABAP proxy - JDBC scenario. We already increased the ICM Keep Alive timeout from 600 to 900 seconds but still the issue persist. Also, the processing timeout is already 900 seconds. Do you know the issue why this issue is occuring? On the R/3 side, when the abap proxy is executed it is throwing an error "Error while receiving.. HTTP 402".
Regards,
Geoff
Edited by: Geoffrey Mendoza on Jun 15, 2011 7:26 PM

Hi Geoff,
The error 402 means "Payment Required".
This code is reserved for future use and does not give us a good hint.
Is it possible for you to enter more details so we may be able to point out a specific cause?
Regards,
Caio Cagnani

Lightroom mobile trial expired issue

I have CC Master and in my installation of Lightroom, it only tells "Lightroom Mobile Trial Expired". Same in iPad. "Your trial period has ended"
I installed it way back almost right away, when it was announced. I also posted a note on a forum about this, and the guy said this would be fixed well before trial was over.
I mean: come on! Someone already said that this is a thing Adobe is working on and that it should be resolved well before trial period is over. Well it is not!
Could you please fix this. I am fed up with all the crap I have been having with CC subscription. Not the first time I have had issues with it. Once I spent two hours with chat tech support trying to fix something that should have been just working.
Crappy, crappy, crappy work, Adobe. I am losing my faith here, and I am not alone.

Hello keith.
That is not true Keith. If it is like you say I could not have the trial version and I had it during a month without any problem!
Saludos, de margaret y un buen día.
El 31/05/2014, a las 14:16, Keith_Reeder <[email protected]> escribió:
Lightroom mobile trial expired issue
created by Keith_Reeder in Photoshop Lightroom - View the full discussion
Margaret, Mobile is only available to CC subscribers because it needs the cloud as the mechanism for syncing between Lightroom and Lightroom Mobile.
Maybe they could say it more explicitly, but the necessity of CC membership is pretty clearly implied (several times) by this page:
https://helpx.adobe.com/creative-cloud/learn/start/tutorials/lightroom-mobile.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6423740#6423740
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Lightroom 5 auto import issues with nikon d90

Hoping someone can help answer my question - I am wondering if Lightroom 5 has any issues with the auto import or tethering feature using a Nikon d90? I was using Lightroom 2 and the auto import feature has no issues with my d90. After I installed Lightroom 5 (Cloud App) and ran it for the first time, the first thing I used was the tethering feature and it worked great for 4 shots. I turned my camera off and then back on again and LR would not recognize my camera any longer for tethering. What's strange is that it will detect it for "Importing from Device" option. So, I went to plan two which was to auto import and that wasn't working at all. I am at a loss. I have a shoot coming up this weekend and need for one of these options to work. Any help is appreciated!!!

I use a D90, but I have never tried tethered shooting with it. Other users might have some suggestions for you, but looking at the list of supported cameras for tethered shooting the D90 is not "officially" supported in Lightroom. So you're probably on your own to find solutions. I know this isn't a lot of help.

Lightroom 4.4 video issues, I think it may be a windows 8 issue.

I am not sure when this started happening or what has changed. I went to import some video and in the import dialog box all my video files show "Preview unavailable for this file" in the thumbnail in the grid view. And if I try to import them i get a dialog box with a message that says Import Results > Some import operations were not performed. > There is a problem with the video file (1) > [Filename].AVI
I am currently using windows 8 and I have imported video to this catalog before from the same camera. The video plays fine in the video players(windows media player, quicktime, and the new video app on windows 8 that is the default player in the OS).
I went throught the http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroo m-4.html and did all those suggestions. I am now turning to the forums before I reach out to support.
Has anyone else run into this issue or a simililar one that may be able to give me a workaround or solution?
I am a cloud subscriber and all my programs are up to date. Windows is current, all players are current, and this specific catalog has .AVI files in it from the same camera and the firmware on the camera has never been updated since I started shooting video.
Thanks,
Alex

I had the same problem -- also on Windows 8. I was trying to import .MOV files from an Olympus OM-D E-M5 into Lightroom and got the error you mentioned.
I believe it was a problem with my QuickTime installation. I was using an unofficial distribution of QuickTime called "QT Lite", and apparently it doesn't play well with Lightroom. Uninstalled that, installed the latest QuickTime and video imports started to work.
Unfortunately I then ran into this other problem, which sometimes causes video editing to fail: http://forums.adobe.com/thread/972420

Lightroom download from Adobe site stops after 327mB instead of 744MB. Can someone help?

lightroom download from Adobe site stops after 327mB instead of 744MB. Can someone help?

try a different browser and/or different wired connection and/or a download manager.
or
if you follow all 7 steps you can directly download a trial here: New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools or New Adobe Lightroom 5: Direct Download Links + Difference vs. LR4 | ProDesignTools or Direct Download Links for Lightroom 3 and Photoshop Elements 8 | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

File to RFC synchronous scenario stopped Picking the files

Hi Experts,
We have a File to RFC synchronous scenario. Till yesterday night it is working fine.
But suddenly it is stooped working.In moni, i can see the failed messages with the Mapping error " Can not create target element, values missing in the queue context "
No Payload in moni / communication channel monitoring / Message monitoring. I've noticed that, wrong files placed in the To-be- processed files and the adapter picked those files and failed in mapping.
I tried by stop and start the communication channel / did some dummy changes in the communication channel and activated. cleared the cache.
But still the communication channel is not working.when i stop and start the communication channel it will try to process the wrong files and failed.
Give me your valuable inputs to resolve this issue.
Regards
Bhargava krishna

Hi Bharghav,
Please go through the below,
Symptom
FTP Adapter is being used in the business scenario for message processing.
During file processing it is noticed, that the FTP sender channel stops
polling. There is no error in the channel monitor or the trace/log files
and the polling jobs are correctly displayed in the AFW scheduler table.
The issue is observed after a network connection issue with the FTP server.
In order to remove the hanging locks from the FTP Adapter, the parameter
'ftp.timeout' setting is required to be set, which releases the lock once
the timeout value is expired. But in the above situation, the value for the
'ftp.timeout' is not taken properly while establishing the data connection
by File Adapter.
Other terms
FTP Adapter, sender, FTP, adapter, timeout, stalled, network, hang, polling
Reason and Prerequisites
Program error
Solution
The hanging situation has now been improved by code changes. Please see
section "SP Patch Level" of this note for a list of updated software
components.
To get this correction available in your Support Package you need to apply
the patch matching to your Support Package version as per the instructions
in the NetWeaver Support Package Stack guide which can be found on the SAP
Service Marketplace as described in SAP Note 952402.
Thanks & Regards
Uday.S

Lightroom 1.1 Slideshow Issues

Hello,
When I click the "play" arrow, or "Impromptu" key from the top tool bar, or "Play All" icon from the right hand of the screen, or any other attempt to get my slideshow to play, all I get is a black screen. I hit "escape", and it immediately goes back to the slideshow I created. If I click the "play" arrow in center screen, it is black inside the center, but I can see that the slideshow is actually "playing" because I see the number of the slide is changing, and at the correct rate (2.0 seconds, with 1.0 second fade). I have changed all settings everywhere and flaggings to try to "see" my slideshow, but just a black screen appears.
The odd thing is that if I exit out of lightroom, and re-open the application, I can get the "play" arrow and "impromptu" button to work a couple times, then they stop working. So I have actually seen the slideshow work a couple times.
If I export the slideshow and save it in Adobe as PDF, it actually saves my pictures, but I have to individually click the pictures in order to see them; there is no slideshow per se.
Any help is appreciated. This is my first attempt at a slideshow so I'm hoping it is my fault, but I'm a little weary because I have gotten it to work a couples times, by pressing buttons that don't work other times. I'm at my wit's end here.
Thanks,
Mindy Lewis

If you are on Windows (and most who experience this issue seem to be) ... try turning off hardware acceleration as a short term workaround:
- right-click an empty area of your desktop, choose properties
- click the Settings tab
- click Advanced
- click the Troubleshooting tab
- set hardware acceleration to None
- click OK to exit
See if that makes a difference. An updated driver is the best solution, but in its absence this may do the trick.

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

WiFi Issues - Stops working all of a sudden - Ipod 4 32G

I wanted the community to be aware of an issue that hit me all of a sudden - my wifi connection on my iPod cease to stop working.
I have a iPod Touch 4, 32G, Windows 7 w/Netgear DSL modem & Router
Today, I was surfing the net with my iPod when all of a sudden I was disconnected. I tried to connect to back but was having problems. As time went by and nothing was happening, I was getting a little worried. My Wii, internet, my wife's iPhone and my 1st &2nd Gen iPods touch's were all connected and working normally but mine was not. I did absolutely everything possible. I went to the user forums and surfed all over to find a solution. In my research, I found that I wasn't the only one that was having this same issue. The only problem was there was no consensus on a solution.
After resetting, deleting, downloading and just about everything else you could do with an iPod, I decided to see if it was my router. I went into my router and set up a "guest" account and all of a sudden my iPod 4 could connect. I then reset my router and it is now working perfectly.
A lot of pain and trouble but the solution was just to reset the modem (in my case, I unplugged it).
This seems to be a strange issue with the iPod 4 as I am not the only one who has been hit with this issue. It has not affected any of my other apple devices except my iPod 4. There is something in how the iPod 4 and the router communicate and the easiest way is to restart your router (all other options did nothing for me)
Hopefully this will help someone out and prevent them from going through all the pain I did.

Hi, this seems like a very annoying problem. Unfortunatly, the community will need some more information to help assist you with this problem. Such as:
1) What programs? Are they resource intensive? I mean, if you are trying to run 4 video games or programs like photoshop and 3dsmax forget about it. And if you have 4 programs ALL attempting to write large amounts to the disk it will yeild a similar result. Usually large amounts of I/O are murder on PC's (by which I mean personal computers...), and of course if you don't have enough RAM its a moot point.
2) What are your specs? How much RAM do you have? What is the size of your virtual memory (page file)?
3) Have you cleared the various caches mac's have? I can't direct you to any good third party programs for mac's but I am sure there is a simple cache cleaner within your system.

Burned DVD issues in DVD player not reading or music issues stop and start

I'm a PC converted to a MAC (less than a month) and love it so far. I have been able to create and burn a DVD. The problem I'm having is one DVD player will not read the DVD (Hitachi). The other DVD player will play it, but the music stops and starts when it transitions (twirl) to another picture (Panasonic DVD/VHS combo). I'm using a DVD R Memorex. Neither one of the player are new. Would love to use this to make the Grandparent's a DVD of the grandchildren from birth to present as Christmas present. What do I need to use or do to be able to watch on any DVD player as well as the computers?
Message was edited by: me01

Hi me01
Welcome to apple discussions. Try using 99 photos / less to avoid issues with audio fades / drops. Also do a search for Memorex on this forum and you'll see it's not the first choice of dvd's for most users. Instead try Verbatim, Maxell, or Taiyo Yuden and burn at 4x from a disc image for best results. Wish you luck and feel free to post back with results or any further questions.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Adobe Lightroom 2.7 exporting issue (says it is exporting at 300dpi but exports at 72dpi)

Hi,
I have lightroom 2.7.
I am a photographer that depends on lightroom. I do a lot of printing from images I export direct form it.
I am trying to export images at 300dpi. I am selecting 300dpi in the export box under image sizing. I use mogrify plugin also if that means anything to anyone.
However when I open up these images in photoshop and go to image size it says they are all 72dpi. My printers have also complained that this has happend as well as my wedding supplier. They all say my images are 72dpi.
I have read all the forum responses like getting rid of the minimise embedded metadata check in the box etc and nothing is working.
I am working hundreds of images at a time and therefore can't afford the time to set up an action in photoshop to resize every single image and sit there an hit the play button.
Does anyone have a simple answer to this issue that has proven to have solved the problem or any other non time consuming work around. Or even a support number for adobe I can call.
It is causing me a huge amount of time loss and stress.
Would be awesome if someone had an answer floating out there.

Bella,
I don't think you've understood my post above. When you export from Lightroom you create JPEG file, a JPEG file does NOT have a DPI measure. You cannot export a file at a certain DPI.
The reason is DPI or Dots Per Inch is a measure of length, inches. A file does not have a length, or a width for that matter. The only meaningful measure for a JPEG file in this context is 'Image Size'. Image size is expressed as pixels wide X pixels high, in the case of your Canon 5616x3744.
Exporting from LR, if you opt to 'Burn Full-Sized JPEG' at 100% then you will get a file of image size 5616x3744. Printed at 300dpi you'll get a print 18.7 inches wide.
If you want a print bigger than that then you have to create more pixels. Software does this by 'making up' new pixels based on the pixels that are already there. Exporting from LR and adjusting the Image Sizing will do it. You can do it from Photoshop. For optimum quality it's best done with some knowledge of the final print size, and print device.
From the sound of things if you supply both parties will full sized JPEG's then you are giving them as much as you can without getting into the murky world of upsizing. The metatdata tag that gives a DPI measure in the file is meaningless, don't let it fool you or the printers.
Hover your mouse over the file (in PC, not suer about Mac) and Windows will show you the image size.
Hope this helps.
Pete

Lightroom 3 and CS5 Issue

I'm getting the following issue.
From Lightroom, if I select "edit in photoshop CS5" and then complete some edits and re-save the file, I will get the 2 of 2 etc in my filmstrip.
However, If I start to work on that image again in lightroom, any adjustment I make causes a flicker, and then the image renders itself again. It blinks, and re-renders with the new adjustment. Very annoying.
The only solution is to shut down lightroom and then re-open it.
Anyone else have this problem and if so, has anyone figured out what might be causing it?
Thanks.
Fulvio

Are you selecting the original file in Lightroom and then 'Edit in Photoshop'? When I do this and then save to the same folder in Photoshop the new file shows up in Lightroom's catalog without any further action be me. Do you have the Photoshop option set to 'Maximise PSD compatibility'?

Synchronized issue

Hi,
I have a synchronized block and Im sending a request to another application (blocking operation). So until i get response, I need to wait(), so that i wont end up consuming too much CPU. I want to wait() but i do also like to ensure that no other thread will enter this synchronized black in the mean time.
Because, i just want one thread to do this complete process and then only let the other thread come in.
I dont know how to stop other Thread acquiring lock while first thread is in waiting state.
..............Something..........
Collection col = null;
.........Some code.........
synchronized(lock)
     send(col);
     while(col == null)
          lock.wait();
     //Do further stuff
void recieveResponse()
synchronized(lock)
     // col is populated
     lock.notify
}

You can always use a Semaphore or a Latch. Or better yet. Use a BlockingQueue with a Consumer-Producer pattern. Would that help?
while(col == null) {
gateLatch = new CountDownLatch(1);
gateLatch.await();
void recieveResponse() {
     synchronized(lock) {
           // col is populated
           gateLatch.countDown();
}

Lightroom 4 Color Profile issue

I'm having real issues with my exported images from Lightroom 4. When editing the files in LR all the colors are fine, however when I export the images look over saturated and often horrible.
For a better understanding of what I'm doing in terms of exporting, I've gone into more detail (with example images) on my blog, here: http://www.dannypaynephotography.com/blog/2013/04/colour-profile-conundrum/
To clarify, I'm using a windows 7 laptop with Lightroom 4, using the built in monitor which has been freshly calibrated using a Spyder2express.
Thanks!
Danny

This has to be a bad monitor profile. Lightroom, Windows Photo Viewer and Firefox are all fully color managed and should, in theory, display identically. But a broken monitor profile can sometimes affect different applications differently.
The Spyder 2 express is not a great calibrator. It's now outdated, but even while it was current it quickly got a bad reputation, and rightfully so. Luckily ColorVision/Datacolor cleaned up their operation, and Spyder 3 and 4 are considered very good, with vastly improved sensors.
To test this, you can try to set sRGB as default monitor profile in Windows, instead of the Spyder profile. Control Panel > Color Management > Devices. I'm assuming, since this is a laptop screen, that it isn't wide gamut.

Lightroom 2.5 Synchronizing Issue - Stops at 30%

Similar Messages

Maybe you are looking for