Lightroom open application error with cache

I purchased Lightroom and recently updated to 5.6 64 bit and when I attempt to open the application I get an error screen that says "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches." And nothing fixes itself when I try to open it again. I have updated it to the newest version thinking that may help and so far nothing is helping. Suggestions?

IIf you look in the folder where your catalog is located, next to the .lrcat file, you'll find a folder with the same name ending in .lrdata.
Delete the folder, and LR will rebuild it when you restart it.
THe .lrdata folder contains the preview cache, and it can be rebuilt any time. Note that on a Mac this looks like a special file, but the process is the same. Trash it and let LR rebuild the previews.
mh++

Similar Messages

Lightroom 5 Application Error

I have installed; fixed; uninstalled and reinstalled Lightroom 5 student version several times. Then I uninstalled it, deleted all files, and downloaded and installed the trial version. The downloads and installs seem to go fine with no errors, but every time I try to open the program, I get a box titled "lightroom.exe - Application Error" with the description "The application was unable to start correctly (0xc 0000 07b). Click OK to close the application." I'm running Windows 7 Home Premium with Service Pack 1. I've rebooted my computer several times and tried closing all other programs. I always get the same error. I have CS5 installed on this computer and it runs fine.

Since your response is neither an answer nor a question, I'm assuming you want more information. I don't know how much you need. This is the System Summary of the System Information screen:
OS Name
Microsoft Windows 7 Home Premium
Version
6.1.7601 Service Pack 1 Build 7601
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
ALLISON-PC
System Manufacturer
Dell Inc.
System Model
Inspiron N5010
System Type
x64-based PC
Processor
Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, 2261 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A04, 5/10/2010
SMBIOS Version
2.6
Windows Directory
C:\windows
System Directory
C:\windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
Allison-PC\Allison
Time Zone
Eastern Daylight Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.80 GB
Available Physical Memory
1.73 GB
Total Virtual Memory
7.60 GB
Available Virtual Memory
5.22 GB
Page File Space
3.80 GB
Page File
C:\pagefile.sys
What exactly am I looking for in the event files?

Error Code "Lightroom.exe Application Error"

Lightroom 4 crashes when opening. Error Code "Lightroom.exe Application Error"
Running Windows 7 64
Is there an easy fix.

[discussion moved to Adobe Reader forum]

Firefox will not start and I get firefox.exe Application Error with the code 0x00000000, I've tried reloading but always get the same error message!

Firefox will not start, I've tried opening in safe mode, no joy. I get the firefox.exe application error 0x00000000
== This happened ==
Every time Firefox opened
== Possibly after a windows update ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; YPC 3.2.0; .NET CLR 1.1.4322; InfoPath.1)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Internal Application Error With Panic Transmit

I have been using Panic Transmit for years with Tiger, and Snow Leopard without any problems to upload to a server that handles my web site. I now have Lion and every time I try to upload a corrected page for my web site I get the following error message.
I am not sure if it has to do with any Apple functions or the remote server that I am using, I am not very familiar with this.
Below is the error message I get every time I open up Transmit to upload a page, can someone tell me if it has to do with some thing in my OS Lion or ? The message below is what I get.
An internal application error has occurred. This error will cause instability, and it is recommended you quit and relaunch Transmit. I am not including the stack frame backtrace since it is very long. In the Console log, I have the message after the Problem Details.
Problem Details:
Application:     Transmit [4095]
Version:         4.1.7
Identifier:      com.panic.Transmit
Exception:       NSRangeException
Reason:          [NOTE: this exception originated in the server.]
*** -[__NSArrayM objectAtIndex:]: index 10 beyond bounds [0 .. 9]
Date/Time:       2011-12-31 21:06:21 +0000
OS Version:      Version 10.7.2 (Build 11C74)
Architecture:    Intel
Report Version: 6
Anonymous UUID: E66005C9-FE03-454A-92DD-0580E743FEB0
Console Log:
2011-12-31 13:51:52.000 Transmit[4095] CFURLCreateWithString was passed this invalid URL string: '/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
Please help, this is all confusing to me.
Daisymay

Hi jakesan,
At the time I was using Transmit last year to FTP to a server that was handling my website, I did not have any problems using Snow Leopard, it was when I installed Lion that I had a problem. I just looked at all of my old emails when I was sending back and forth information like plist etc., to Les a Panic tech. I spent about three weeks sending information to him, and he could not find out what the problem was, so I just stopped using Transmit.
I just clicked on Transmit to open up the application, and I still get the window with the error saying that
"An internal application error has occurred." I installed the new update to version 4.2 and got the same message.
Last year the company that I was using to host my website went out of business, and so I went with
Go Daddy, and I have been using their FTP program to make changes to my website as needed and I don't have any problems.
Some day I still may try to find out what is going on but when I mentioned this to Go Daddy in January, 2012 the tech's said that there have been many complaints on the web about this problem.
I don't know if anyone is having this problem with Mountain Lion, I have not downloaded the new operating system yet, maybe someone can let us know if they still have a problem with Transmit 4.2 and Mountain Lion.
Hope this helps you, but for now I would look at another FTP program to use, and maybe "Google" what would work with Lion or Mountain Lion.
Have a good Holiday Season,
Daisymay

Cannot open application associated with unknown filetype

I am trying to download or open a file type of .psdata for which I have an application installed however when I click the link FF simply opens the file which of course displays a page of binary data.
FF used to open this file correctly but now it does not.
Thanks

Thanks cor-el
The application isn't installed as a plugin, it is a program on the PC.
This works fine in IE and used to work with previous versions of FF. The file type is recognized and the option to save or open the program is given.
As I say, at the moment all I am getting is a browser page of binary data instead of the Save or Open option.
'''''With what content type does the server send the file? '''''
'''''If Firefox displays the file in a tab then it is likely that the server sends the file as text/plain.'''''
Yes it does.

Open CL errors with AMD Radeon HD 6750M, on Premiere Pro CC 7.0 and 7.0.1

I am on a Macbook Pro early-2011 with a 1Gb AMD Radeon HD 6750M - I noticed this in Console, repeating constantly while loading Premiere as well as all throughout my edit session and export:
MacBook-Pro.local Adobe Premiere Pro CC[770]: [CL_INVALID_OPERATION] : OpenCL Error : Failed to retrieve device information! Invalid enumerated value!
Meanwhile in project settings my Video Rendering and Playback settings is happily set to Mercury Playback Engine GPU Acceleration (Open CL) - not greyed out like in CS6. Someone else mentioned having the same open CL errors but said it only occured when they updated to 7.0.1 - however, I have seen the exact open cl errors on both 7.0 and 7.0.1 (every string is identical except the "[770]" which can have other values like [270] or [1060] etc. I have graphics switching off and my AMD Radeon HD 6750M shows up fine in system profiler. I am worried there might be something wrong with it, but other than in Premiere CC, I am having no problems.
Can anyone shed some light on this? Is it a bug? Is there any other info I can provide that would help clarify anything?
I've spent way too many hours and late nights trying to troubleshoot but couldn't come up with anything, so any help would be more than appreciated!
Thanks,
Ronny

Anybody from Adobe have any insight? Are you aware of this? I hope this is being looked into soon because I have a wave of TEDx HD videos to edit coming up in less than a week and just need some reassurance. Should I be worried?
Maybe the problem is with Apple's Console not logging it correctly, since my Mercury (CPU) option is not grayed out and still selected.

6300 'Application error' with Sensor

i've had lots of fun using Sensor but all of a sudden to my horror Sensor stopped working, im getting an
'Application error' when i loads up and the
'Details' are
"com.nokia.mid.appl.sensor.S...(small text at top of screen)
Security
java/lang/SecurityException
Access denied"
i've tried reinstalling it with a backup from andy29b (thanks mate) but still the same error, i've tried restoring it with a backup of my phone + memory card using PC Suite but the backup log showed that it only restore the Sensor '.jad' file.
Please help
Thanks

update:
i figured if i highlight Sensor press 'Options' go to
'Application access>Data access>Add and edit data' there is 4 option:
"Ask every time
Ask first time only (disabled-grey)
Always allowed (disabled-grey)
Not allowed (highlighted)"
when i change this option to 'Ask every time' Sensor doesn't give me the 'Application error' any more but its not usable because it continuously asks to 'Allow application to edit and add new data in: Gallery' less then every second, i need to set this to 'Ask first time only' or 'Always allowed' but it wont let me
does anyone have a solution
and just incase my Sensor>Options>Details is:
Name: Sensor
Size: 320 kB
Created: 11-10-2007 07:37
Version: 1.23
Vendor: Nokia
Certificate: No

Application error with flash

I am getting application error 0x7745a389 upon start up. My only option is to click on close this application box. any idea of how to fix this? Windows 7 home edition and Firefox
Thanks,
Mitch

Startup of Windows or your browser?
Does the message indicate what module produces this error?

Application error with ResultSet

Hi everyone,
I meet a big problem. My ResultSet just can get few data, under 20, otherwise, my program will get application error in the MFC application.
"The instruction at "0x77f53207" reference memory at "0x000000000". The memory could not be "written".
The code runs correctly and the error will not happed under DOS mode. However, when I move them to MFC application, the error happen.
Please give me a help
Thanks a lot!!!!

Hi Shanker
Currently, I am using MultiThreaded run-time library, and oraocci9.lib. If I use /MTd, I can not fetch out the data set. The problem is assertion failure. Expression : _CrtIsVaildHeapPointer.If I use /MT, the application error(memory error) will happen if I reuse the ResultSet later, but I can fetch out all data in the first time.
void DecryptForm::OnSelect()
     string data;
     CString dataStr;
     CString currTableName;
     CString query;
     currTableName = getTableName();
     query.Format("select column_name from user_tab_columns where table_name = '%s'", currTableName);
     rs = myOracleInfo->search((LPCTSTR) query);
     m_list_attr.ResetContent();
     while(rs->next())
          data = rs->getString(1);
          dataStr = data.c_str();
          m_list_attr.AddString(dataStr);
Could you give some suggestions?
Thanks
Maivis

Unable to open applications: error code -10810

For some reason I have started to have problems opening up applications after my computer has been on for around 10 minutes. I am able to open up apps at startup, but after they've been running for a while, if I try to open additional apps (from either the doc or the apps folder) I get a pop-up error window with the code "-10810". This number shows up in all the error windows.
I've tried to do some research on this and found a couple of articles saying to delete the following:
/Library/Caches/com.apple.LaunchServices.6B.csstore
~/Library/Preferences/com.apple.LaunchServices.plist
(where '~' means your Home directory, i.e. '/Users/yourname')
but I don't have this particular file.
Can anyone help me? This problem just started today, but I've been running Leopard for about a month now.

Was able to startup TM again my pressing the Control key while clicking the TM app icon. A pop-up menu appeared from which TM Preferences was selected. It appears that error code -43 is akin to a external HD that is not mounted. All is well again

I use blackboard, since the latest update to 3.6.14, I get errors with caching applets, use IE and works fine. Whats happened and what can I do to resolve it?

Error Cache:
Unable to update files in cache.
Name: myApplet
java.net.MalformedURLException: no protocol: jar/dragndrop_applet.jar
I get a bunch of these Cache Errors. Happens with application only, its blackboard hosted by continuinged.uml.edu.
Run the same thing using IE it has no problems. Firefox till the latest upgrade was also working fine.
What can I do to resolve this problem?

There's a bug in 3.6.14 with Java applets. 3.6.15 was released last Friday to fix that bug. Use '''Help > Check for Updates''' to start the update process to 3.6.15.

"Camera is in use by another application" error with built-in iSight

This message pops up if I try to do video preview in iChat or try to open Photo Booth. There are no other applications running that I can tell and I have unplugged all USB and firewire cables. Also performed a reinstall of bundled software from the Tiger DVD to no avail. (OS X 10.4.9, iChat AV 3.1.8 (v445) )
I am trying to set up iChat video for the 1st time with another .mac user -- we have been able to IM and audio chat, and the video preview works on their end. Help! Thanks, Derek.<<br>
PowerPC G4 Mac OS X (10.4.9) iChat AV 3.1.8 (v445)

Thanks for the link Tony, but unfortunately still no luck in getting it to work. So far I have tried several things: 1) disconnecting all connections; 2) reinstalling Tiger bundled software apps; 3) creating a new login account; 3) "Repair Disk Permissions" from Util>Disk Util>First Aid; 4) SMC reset.
Something I've observed is that on a powerup restart, Image Capture will automatically launch and a "No image capture device connected" window will pop up. (This is because I set the Image Capture preferences to launch when a camera device is connected; it will launch iPhoto if preference setting is "iPhoto", or nothing if set to "none") Obviously my iMac seems to think a device is connected. However nothing unusual shows up in the System Profiler contents.
Is there another diagnostics tool to investigate or any other suggestions?
Thanks, Derek.

Application error with blackberry 8520 curve

hello,
i own a blackberry 8520 curve and i keep having the same problem with logging in into yahoo messenger.
while i can log in from a PC or another phone, logging in from this phone seems impossible, regardless the account i try logging in with. after it displays the ''connecting to" message it pops this: "'internal error. please try again''.
i tried reintroducing the internet connection settings; i reinstalled the application, i've put another SIM card into this phone and i've removed all the entries from my yahoo account's apps and website connections list - and it keeps popping the error message
i hope receiving an answer, 'cause it's been 4 days without getting to use the app.
Madalina Negrescu

Hello mady_rx8
Welcome to the Community
You may try this and hope it resolves the issue.
Login to Yahoo! mail via a computer browser.
Navigate to Account Information.
Select the Manage Apps and Website Connections.
Remove any access for BlackBerry® or RIM® related connections.
Launch Yahoo! Messenger for BlackBerry smartphones.
Sign in with valid Yahoo! credentials.
Goodluck
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Webdynpro application errors with SLD,J2EE Engine - JCOs probelem

Hi,
I have developed a small webdynpro application
1. Passing 2 values to RFC
2. Getting result contents from RFC and displayed in a table.
I am getting following errors:
u2022     SLD is not accessible. Check SLD Data Supplier service settings.
u2022     Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'.
u2022     ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [SAP-J2EE-Engine : administrators].
u2022     application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.clientserver.session.CloseResponseException: An attempt to write after the stream had been closed.
Exception id: [0002559A6FCB0077000000A0000CF0E8000460EC9406F721]
u2022     application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error. The error is: com.sap.tc.webdynpro.clientserver.session.CloseResponseException: An attempt to write after the stream had been closed.
at
Please suggest me.

Hi Kiran,
You need configure SLD and JCo destinations in your j2ee engine..
Check this [article |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5] to create the SLD and JCo destinations.
regards,
Siva

Lightroom open application error with cache

Similar Messages

Maybe you are looking for