Line in recorde mostly noise and very low audio (please help)

i think i may be giving my client a lot of money back...
about 20 minutes into a video gig i realized that the line in audio i was getting on my camera was not working properly so i pulled the plug and jsut picked up from the camra mic, but i am left with about... 18 minutes of very very poor audio. are there any brave and generouse soundtrack pros who can tell me waht setting to apply to make this "listenable"
you can download a 30 second snipit here: http://www.video-guy.com/forums/ami_out_ofluck.zip
i have soundtrack, but rarely use it, so like i said. if anyone would be kind enough to hold my hand and tell me what buttons to push i would be very much in your debt.
heck, i'll even do some free photoshop, or final cut work for you.
thanks.

First off, yes you're pretty much out of luck. I listened to your sample, and there's probably nothing you could do to make this sound good. With enough filtering, you could make it so the voice is marginally intelligible, but it's never going to sound like a good recording.
Second, while this web forum is good for discussion about Soundtrack Pro's features and how to use them, I've found that Usenet has much more meaningful discussions on audio editing techniques in general. A couple newsgroups I read religiously are rec.arts.movies.production.sound and rec.audio.pro.

Similar Messages

  • I connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.

    i connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.
    helllllllllllllllllpppppppeeeeeeeee me

    There is no such thing as an iPhone 4G.

  • Missing audio in some applications and very low audio in others

    Hi,
    I am using Gnome 3 with Arch Linux and I started to notice that there is no sound with certain applications... but for the majority of the system the sound still works. For example, normally, when I click on the volume icon and move the slider up and down it usually has a "pop" sound with varying degrees of loudness based on where it is on the slider... that is completely silent now. When I am using other applications (such as cmus, pianobar, ..etc) the volume is really low even when I put the volume for that application up to 100%.
    Additionally, I was trying to pinpoint exactly what could be causing this problem and I remember that it happened when I was using pidgin and I went to the volume settings and moved the sliders all the way up and back down to the middle again.. after that it hasn't been the same.
    $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC269 Digital [ALC269 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    $
    $ uname -a
    Linux r**** 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Genuine Intel(R) CPU U2700 @ 1.30GHz GenuineIntel GNU/Linux
    $
    My computer is an ACER Aspire 4810TZ

    Nouveau has a bug currently. Other drivers have been fixed, nouveau not yet. The cause is the way cairo-1.12 does things, it required patches in X and all open drivers. Keep an eye on this: https://bugs.archlinux.org/task/29495
    Also, unrelated to that, you don't have hardware opengl acceleration. You're probably missing nouveau-dri.

  • Big problem and very stupid mistake, please help me

    I was about to put leopard on my iBook g4 when on the read before installing thing it said if you want to start fresh delete your hard disk. I did that and the cd didn't work so now I'm stuck with nothing on my computer. Oh and by the way I don't understand why it didn't work, when I put the cd in and I restarted my computer it just made weird noises for a few hours and nothing happened. Thanks for helping!

    See if you can use the install disks that shipped with your iBook. If so, then again erase and try installing 10.5.
    As far as retrieving your data (if you have no backup) before you do another operation on that drive your best bet is Prosoft Data Rescue. There is a free trial to see if it can recover what you need. But don't do another operation on that drive until you've downloaded and run it. Also, a service that has been recommended but I cannot personally endorse is DriveSavers.
    -mj

  • Hi all the functionality needed (only hold lines) but iam getting hold and with hold data,please help me

    SELECT      hou.NAME                     Operating_Unit_Name,
                pv.SEGMENT1                  Supplier_Num ,
                pv.VENDOR_NAME               Supplier_Name ,
                pvs.VENDOR_SITE_CODE         Supplier_Site_Name ,
                pvs.ADDRESS_LINE1            Address_Line_1 ,
                aia.DOC_SEQUENCE_VALUE       Invoice_Sequence_Num ,
                aia.INVOICE_NUM              Invoice_Num ,
                aia.INVOICE_DATE             Invoice_Date ,
                aps.DUE_DATE                 Due_Date ,
                aha.HOLD_LOOKUP_CODE         Hold_Name ,
                aha.HOLD_DATE                Hold_Date ,
                aha.HOLD_REASON              Hold_Description ,
                aha.RELEASE_LOOKUP_CODE      Hold_Release_Description ,
                aia.DESCRIPTION              Invoice_Description ,
                aia.INVOICE_CURRENCY_CODE    Invoice_Currency_Code ,
                min(aia.INVOICE_AMOUNT)      Invoice_Entered_Amount_MIN ,
                APPS.XXDBD_CURRENCY.GET_VALUE_IN_USD(pha.CURRENCY_CODE,( (aia.INVOICE_AMOUNT) ),pha.CREATION_DATE)  INVOICE_AMOUNT_IN_USD ,
                min(aia.BASE_AMOUNT)         Invoice_Functional_Amount_MIN ,
                pha.SEGMENT1                 PO_Document_Number ,
                pla.LINE_NUM                 PO_Line_Num ,
                pda.QUANTITY_ORDERED         PO_Ordered_Quantity ,
                pll.QUANTITY_RECEIVED        Qty_Received_to_Date ,
                pda.QUANTITY_BILLED          Billed_Quantity_to_Date ,
                msi.segment1                 Item_Number ,
                pla.ITEM_DESCRIPTION         Item_Description ,
                ROUND(pla.UNIT_PRICE,2)      PO_Unit_Price ,
                ROUND(aid.UNIT_PRICE,2)      Unit_Price_on_Invoice ,
                aid.AMOUNT                   Invoice_Distribution_Amount ,
                aha.RELEASE_REASON           Hold_Release_Reason ,
                ppf.FULL_NAME                Buyer_Or_Requester_Name ,
                aid.INVOICE_PRICE_VARIANCE   Price_Variance ,
                APPS.XXDBD_CURRENCY.GET_VALUE_IN_USD(pha.CURRENCY_CODE,( SUM(aid.INVOICE_PRICE_VARIANCE) ),pha.CREATION_DATE)  Price_Variance_in_Usd ,           
                aid.QUANTITY_INVOICED        Invoice_Matched_Quantity ,
                SUM(aia.BASE_AMOUNT)         Invoice_Functional_Amount_SUM           
    FROM        ap_invoices_all              aia,
                ap_invoice_distributions_all aid,
                po_headers_all               pha,
                po_lines_all                 pla,
                po_line_locations_all        pll,
                po_distributions_all         pda,
                ap_holds_all                 aha,
                hr_all_organization_units    hou,
                po_vendors                   pv,
                po_vendor_sites_all          pvs,
                ap_payment_schedules_all     aps,
                per_people_f                 ppf,
                mtl_system_items             msi           
    WHERE       pv.VENDOR_ID            =pha.VENDOR_ID
    AND         pv.VENDOR_ID            =pvs.VENDOR_ID
    AND         aps.INVOICE_ID          =aia.INVOICE_ID
    AND         aia.INVOICE_ID          =aid.INVOICE_ID
    AND         aha.INVOICE_ID          =aia.INVOICE_ID
    AND         aha.LINE_LOCATION_ID    =pda.LINE_LOCATION_ID
    AND         pha.PO_HEADER_ID        =pla.PO_HEADER_ID
    AND         pla.PO_LINE_ID          =pll.PO_LINE_ID
    AND         pll.LINE_LOCATION_ID    =pda.LINE_LOCATION_ID
    AND         pda.PO_DISTRIBUTION_ID  =aid.PO_DISTRIBUTION_ID
    AND         pha.VENDOR_SITE_ID      =pvs.VENDOR_SITE_ID
    AND         pha.VENDOR_ID           =pv.VENDOR_ID
    AND         pv.VENDOR_ID            =aia.VENDOR_ID
    AND         pvs.ORG_ID              =hou.ORGANIZATION_ID
    AND         pvs.ORG_ID              =pda.ORG_ID
    AND         ppf.PERSON_ID           =pha.AGENT_ID
    AND         pla.ITEM_ID             =msi.INVENTORY_ITEM_ID
    AND         pll.SHIP_TO_ORGANIZATION_ID     =msi.ORGANIZATION_ID
    AND         aha.RELEASE_REASON   IS NULL
    AND         aha.RELEASE_LOOKUP_CODE IS  NULL
    and         hou.name ='DEL Operating Unit'
    GROUP BY    hou.NAME               ,
                pv.SEGMENT1            ,
                pv.VENDOR_NAME         ,
                pvs.VENDOR_SITE_CODE   ,
                pvs.ADDRESS_LINE1      ,
                aia.DOC_SEQUENCE_VALUE ,
                aia.INVOICE_NUM        ,
                aia.INVOICE_DATE       ,
                aps.DUE_DATE           ,
                aha.HOLD_LOOKUP_CODE   ,
                aha.HOLD_DATE          ,
                aha.HOLD_REASON        ,
                aha.RELEASE_REASON     ,
                aia.DESCRIPTION        ,
                aia.INVOICE_CURRENCY_CODE,
                aia.INVOICE_AMOUNT  ,
                aia.BASE_AMOUNT     ,
                aia.BASE_AMOUNT     ,
                pha.SEGMENT1        ,
                pha.CURRENCY_CODE   ,
                pha.CREATION_DATE   ,
                pla.LINE_NUM        ,
                pda.QUANTITY_ORDERED,
                pll.QUANTITY_RECEIVED,
                pda.QUANTITY_BILLED  ,
                msi.segment1         ,
                pla.ITEM_DESCRIPTION ,
                pla.UNIT_PRICE       ,
                aid.UNIT_PRICE       ,
                aid.AMOUNT           ,
                aha.RELEASE_LOOKUP_CODE,
                ppf.FULL_NAME          ,
                aid.INVOICE_PRICE_VARIANCE,
                aid.QUANTITY_INVOICED
    ORDER BY    aia.invoice_num;

    Have a look here:
    http://forums.macrumors.com/archive/index.php/t-982315.html

  • IDT High Definition Audio CODEC v. 6.10.6395.​0 Upon installati​on I have very low audio output

    IDT High Definition Audio CODEC v. 6.10.6395.0.  5/21/ 2012
    Upon installation I have very low audio output!   Screen Shot    Screen Shot 2
        I have tried:
    un-installing and reinstalling the drivers.
    Installed the original drivers via HP's website sp53222 for my particular model.  HP  Pavilion HPE  h8-1070t
    Any suggestions? would be greatly appreciated.  It would appear IDT who I also emailed and they never responded is responsible for a codec pack that is not fully functional with this motherboard.
    was wir lieben meistens nicht kriegen

    Did you access the Catalyst Control Center in programs and look at the latest updates for your graphics card and make sure you didn't download the audio drivers they self install and are checked automatically each time you attempt an update for the card.
    Did you right click on the speaker in the system tray and go into recodring devices make sure everything is setup propper there sometimes they too can change.
    I'm familiar with cakewalk but never used it on Win7 its been many years since I played around with that. If you are using the onboard audio card and it has worked before and not now if I were in your situtation I would attempt to reisntall the dirvers via device manager they do sometimes become corrupt especially if you picked up any malware that was removed by your antivirus software due to the drivers and malware both reside inwindows\system32.
    After the reisntall of the drivers if the issue is not resolved I would upgrade the audio card with a  PCIe x1 component such as:
    Creative Labs SB1040 PCI Express Sound Blaster X-Fi Xtreme Audio Sound Card
     http://www.amazon.com/Creative-Labs-SB1040-Express​-Blaster/dp/B000W7PNZI/ref=sr_1_1?ie=UTF8&qid=1357​...
    After I paid for a real soundcard with Recording: 24-bit/96kHz and Sound Output Mode - 7.1 and bypassed my onboard audiocard I never had any issues again. My onbaord worked too in the begining for certain things than stopped mysteryously and the reinstallation became ineffective after a while so I decided the money for the tower was invested mainly in the CPU i7 the RAM and HDD.
    *** Note if you did install the audio drivers for the graphics card you will have to change the onboard audio in the BIOS from automattic to enabled. Otherwise you will have no sound at all. So never take the audio drivers for the graphics card unless you need them for DVR recording or something. The PCIe audio cards are never effected by this however only the onboard audio. Another reason onboard is a cheap way to go and HP bundles it as cheap as it can my friend.
    Good Luck again!
    was wir lieben meistens nicht kriegen

  • Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

    Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

    Hello ElleMalloy,
    Sorry Im Just Responding Phone Has Been Downloading And Charging.
    Well I Will Start Here,
    I Tried Everything I Even Restarted My Settings Just So I Can See if That Would Work Because Someone Sujested It But What They Neglected To Say That Their Probrolem Was With A Ipad ? Anywho To Keep It Short I Went Online Logged A Complaint With Apple Made A Appointment With A Apple Store In My Area To Take The Phone There After Trying Everything (Resetting, changing setting etc..........) Nothin Worked Upon Taking The Phone To The Store They Swapped Out My Phone For A New One Volume On New Phone Is Perfect And I Only Had To Wait 40 Minutes

  • My airport on my macbook 2008 unibody disconnects and sometimes freezes mostly when I move laptop. Please help. OS 10.6.8

    My airport on my macbook 2008 unibody disconnects and sometimes freezes mostly when I move laptop. Please help. OS 10.6.8

    The sleep problem is a bug in 10.8. We have to wait for resolution.

  • Hello my name is vicky i have an ipod classic 160 gb  when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod  i even checked the number of reallocs and pending sectors so please help me......for t

    hello my name is vicky i have an ipod classic 160 gb  when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod  i even checked the number of reallocs and pending sectors so please help me......for this

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

    My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

    Is your iPhone connected to your computer using the lightning cable or are you doing WiFi sync?
    Sometimes the iPhone doesn't show up in the side bar if you're using WiFi syncing, if its not working, then be connected to your WiFi on your phone and on your computer (Same network) let me know how it's going, if it doesn't work still. Turn your phone off and on again and put in your pass code then try to sync it (keep your phone unlocked and not in sleep mode) tel me if it appears in the side bar.

  • What is the deal.  I'm trying to request service for my Ipod and everytime I go through everything and submit it, it says "Sorry we can't process your request at this time..."  I have tried numerous times and am getting very frustrated.  Please help.

    What is the deal?  I'm trying to request service for my ipod touch and every time I go through everything and submit it, it says "Sorry we can't process your request at this time..."  I'm getting very frustrated. Please help.

    Thanks for the detail.
    I believe you are doing your best, in the right place.  How long have you tried ?
    May be the sistem in your area is really busy. Can you wait few hours or contact them with a Message ?
    Or try a Service provider http://support.apple.com/kb/HT1434

  • I recently lost and tracked down my iPhone (4s) w/find my iPhone. It was awesome! When I recovered it, my touch screen didn't work at all! What's going on? I'm very frustrated! Please help:(

    I recently lost and tracked down my iPhone (4s) w/find my iPhone. It was awesome! When I recovered it, my touch screen didn't work at all! What's going on? I'm very frustrated! Please help:(

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • I can't watch Dailymotion videos on my iPad but can do so on my iPhone and PC. Very strange. Please help !

    I can't watch Dailymotion videos on my iPad but can do so on my iPhone and PC. Very strange. Please help !

    Take it to an Apple store genius bar to have the techs see what your options are for repair/replacement.  An out-of-warranty replacement is $149 in the US for the iPhone 4.

  • TS2755 in the usage part of my phone it says 1.9Gb of memory is taking up by messages, i have deleted most of my messages and still no luck, please help?:((

    in the usage part of my phone it says 1.9Gb of memory is taking up by messages, i have deleted most of my messages and still no luck, please help?:((

    I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
    But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

  • HT1267 I have a big problem regarding my iphone4 it wont start up and it keeps vibrating, please help me fix it. its been vibrating since 2 pm until now 7pm here in Philippines :(

    I have a big problem regarding my iphone4 it wont start up and it keeps vibrating, please help me fix it. its been vibrating since 2 pm until now 7pm here in Philippines

    What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
    If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
    How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager?

Maybe you are looking for

  • Scroll bar, as designed, creates an undesired response lag.

    Observation I'm unsure if accurate, but I've experienced firsthand: **It appears that the slider component of the scroll bar does not create/send "OnDrag" info until the cursor passes the midpoint of the slider. Thus, if I'm interested in scrolling d

  • Helllllllllllp

    Hi all , i have some problems in my iphone 3G  , the fisrt problem is concernig WI-FI i can't activate it or even desactivate it .. Second problem is that i can't make any call or send a message i can only receive them .. I hope that you help me beca

  • Default  field regarding

    Hi , Can u explain where do we maintain default  fields in the table J_1IQEXCISE. Thanks & Regards Rohan.A

  • Logical standby failed with LOGSTDBY status: ORA-01281: SCN range specified

    My logical standby datbase on 11gR2 failed with the above message. A search on the error says Error: ORA-01281 (ORA-1281) Text: SCN range specified is invalid Cause: StartSCN may be greater than EndSCN, or the SCN specified may be invalid. Action: Sp

  • How to retrieve deleted files back

    hello?