Link of Sample Configuration of APs in Design Zone
Hi,
I'm trying to find a document in Design Zone about configuring a Wireless AP and I wasn't able to find it. Can someone provide a link?
I have a good experience configuring switches, routers and firewalls in CLI and this is the first that I have my hands on APs (1240 AG).
Thanks in advance.
Hi
Here is the link where you can check on the configuration guide for the access point you have.
http://www.cisco.com/en/US/partner/products/ps6521/prod_configuration_examples_list.html
http://www.cisco.com/en/US/partner/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b.html
If you let me know what you want to achieve with the AP, I could try to provide you to steps to configure the AP as needed.
As basic information remember that the access points are layer 2 devices . To be able to configure the unit you need that the unit gets an IP address from the DHCP server on the network and you access the AP via the GUI or CLI using the IP address the DHCP server gave it or if not you can also configure an static IP address on the unit using the console port and assign the required IP address to the BVI1 interface.
Similar Messages
-
Sample SD reports in querry designer
Hi,
We want to see the sample SD report at queerry design.we mean that. We want to check out sd reports querry designer to see how it is creating?
Any link ?we are really appretiated..Hi,
Designing SD queries or any queries depends on client requirement (refer report template) and you design query on top of IC/DSO/Multiprovider mostly with effective performance.
Use following Bex Functions and design query. understand each function properly and use them to improve query performance.
- Generate index.
- Build query on multiprovider and better use Constant Selection Function to bring infoset functionality to Multiprovider.
- Make your query more dynamic using variables.
- Do partitioning on IC when you have restriction on 0CALMONTH.
- Use more free charecterstics.
- Use include than exclude at Bex level.
- Utilize Cache mode and Read mode functions.
http://help.sap.com/saphelp_nw04/helpdata/en/9d/76563cc368b60fe10000000a114084/content.htm
Regards,
rvc -
Remote access sample configuration
Hi,
i have a 3825 router with a NM-12DM (digital modem), and i want to configure remote access on it.
Can some body give me a link for a sample configuration ?
RegardsHowdy,
The following link has a great simple config that should enable you to get started:
http://www.cisco.com/en/US/customer/products/hw/routers/ps274/products_configuration_example09186a0080094691.shtml
Hope that helps.
Pls remember to rate posts.
Regards,
Paresh. -
Hello,
I'm wondering if someone can point me to an updated Sample Configuration doc to set up the following :
Cisco 1121 ACS ver. 5.3 as Radius server
Cisco 2500 WLC serving Light AP's
Windows 2008R2 Active Directory as backend authentication server
Basically my client wants to use an AD security group to allow access to thier Wireless AP's for their user community
I "think" I have most of the pieces in place. Just a little fuzzy on the full picture. Also, to complete this config, will I need any certificates? What protocols (client) are best to use, etc?
Thank youHello,
I think the link below might help you out:-
https://supportforums.cisco.com/docs/DOC-21679 -
Sample configuration of using (MSTP) feature on 3560
Hi,
I have 3560 switch running PVST, performing purely as layer 2 vlans, I already reached 120 vlans so I will be running out of spantree soon.
I would like to have a sample configuration of using (MST) feature to map multiple vlans to a single vlan to minimize my maximum spantree per vlan usage.
Any sample config would be highly appreciated.
thanks,Hi Friend,
Have a look at this
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# instance 1 vlan 10-20
Switch(config-mst)# name region1
Switch(config-mst)# revision 1
But I will recommend you to go through the complete link below to get full idea of MST before implementing in your network.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swmstp.htm#wp1017196
HTH,if yes please rate the post
Ankur -
Request for sample reports developed using report designer
Hi All,
Request for sample reports developed using report designer.
ThanksRamesh,
right now there really is no way to solve what you are looking for. There partial solutions, but you will not be able to force a page break in a dynamic report.
Here is what I have faced, and what I have come up with so far:
I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure. I need to be able to re-use the header and the general report design with 6 reports. Here is my solution:
1. Create an outline of the report. I did all the formatting by creating a report section for each page. You can force page breaks between the pages. Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
2. Insert all you page breaks and do all the formatting.
3. Insert an infoprovider. Once in, you can just drag and drop the key figure cells into your formatted report.
4. Create additional modification for formatting as needed.
This fixes my problem (for now), but I had to do a lot of work to come up with this. Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report. I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
good luck
Pavel -
The links the samples on the http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/files/9i_sqlj/sqlj9i.html page don't work!
Could someone from Oracle fix them?
ThanksThese links have been restored.
Regards, OTN -
Folks,
I wrote a small program to parse the configuration. I am looking for a sample configuration of a Edge Router ( preferably 7200 ) having lots of configuration data including VPN , Martini Tunnel etc. I need to test my parser.
Any help will be greatly appriciated.And....I am looking for a sample program to parse...could you help me...
-
How to add .js link in custom list form through sharepoint designer 2013
hi friends
so far i was adding jquery code to script editor webpart in custom list form.
but i need to know how to add .js link in custom list form through sharepoint designer 2013
please help me.Hi,
We can add the "JS Link Property" in the “WebPart” node in the custom list form page through SharePoint designer 2013.
Here is an example for your reference:
<JSLink xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm">~site/Style Library/js/custom.js</JSLink>
Noticed that, we should not lose the 'xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm' attribute.
Best Regards
Dennis Guo
TechNet Community Support -
Configuring OIM Server and Design Console
Hi Guys,
I trying to configuring OIM Server and Design Console via the OUI Configuration Wizard am getting the following error being reported. Can anyone advise.
Oracle [ID 1234357.1]
Unable to contact MBeanServer for oracle.as.soainfra.config:
Location=soa_server1,WorkflowIdentityConfig.ConfigurationType=jazn.com,WorkflowIdentityConfig=human-workflow,type=WorkflowIdentityConfig.ConfigurationType.ProviderType.PropertyType,Application=soa-infra,name=jpsContextName,WorkflowIdentityConfig.ConfigurationType.ProviderType=JpsProvider
Step Configure OIM Server failed
The steps taken are as followed:
a. Install Database -- Completed
b. Run RCU and create Schema for PS1 - Completed no reported error's
c. Install Weblogic Server 10.3.6 - Completed
d. Install SOA Server 11.1.1.7.0 and Install SOA patches:
p16471502_111170_Generic_1of2.zip
p16471502_111170_Generic_2of2.zip
e. Install IDM Server 11.1.1.7.0 - Completed
f. Create Domains - Completed
g. Configure Security Store Python Script _ unable to run as does not exist.
h. Start both Admin server and SOA server - Started ok no reported errors.
Any help would be of help.
Regards,
KHi Kevin,
Thanks for getting back to me please see status from opatch.
Output from opatch (IDM):
C:\Windows\system32>set PATH=c:\Java\jrockit-jdk1.6.0_45-R28.2.7-4.1.0\bin;%PATH%
C:\Windows\system32>set ORACLE_HOME=c:\app\oracle\Middleware\product\fmw\Oracle_IDM1
C:\Windows\system32>set PATH=c:\app\oracle\Middleware\product\fmw\Oracle_IDM1\OPatch
C:\Windows\system32>opatch lsinventory
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : c:\app\oracle\Middleware\product\fmw\Oracle_IDM1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.1.0.9.9
OUI version : 11.1.0.9.0
Log file location : c:\app\oracle\Middleware\product\fmw\Oracle_IDM1\cfgtoollogs\opatch\opatch2013-07-18_14-29-36PM_1.log
OPatch detects the Middleware Home as "C:\app\oracle\Middleware\product\fmw"
Lsinventory Output file location : c:\app\oracle\Middleware\product\fmw\Oracle_IDM1\cfgtoollogs\opatch\lsinv\lsinventory2013-07-18
_14-29-36PM.txt
Installed Top-level Products (1):
Oracle IDM Suite 11.1.1.7.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
C:\Windows\system32>
Output from opatch (SOA):
C:\Windows\system32>set PATH=c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\OPatch
C:\Windows\system32>set ORACLE_HOME=c:\app\oracle\Middleware\product\fmw\Oracle_SOA1
C:\Windows\system32>opatch lsinventory
CLASSPATH=;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\app\oracle\MIDDLE~
1\product\fmw\ORACLE~1\soa\modules\commons-cli-1.1.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fab
ric_11.1.1\fabric-runtime.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tool
s.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;c:\app\oracle\Middl
eware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;c:\app\oracle\Middleware\product\fmw\Oracle_
SOA1\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.bpm.admin.lifecycle.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.classloader_11.1.1.jar;C:\app\oracle\MIDD
LE~1\product\fmw\ORACLE~1\modules\org.apache.commons.logging_1.0.4.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\org.apa
che.commons.beanutils_1.6.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.ucp_11.1.0.jar;c:\app\oracle\Middleware\p
roduct\fmw\Oracle_SOA1\soa\modules\oracle.rules_11.1.1\rulesdk2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.rules_11.1.1\rl.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.adf.model_11.1.1\adfm.jar;C:\app\oracle\MIDDL
E~1\product\fmw\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.xdk_1
1.1.0\xmlparserv2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\communications\modules\usermessaging-command_11.1.1.jar
CLASSPATH=;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\app\oracle\MIDDLE~
1\product\fmw\ORACLE~1\soa\modules\commons-cli-1.1.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fab
ric_11.1.1\fabric-runtime.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tool
s.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;c:\app\oracle\Middl
eware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;c:\app\oracle\Middleware\product\fmw\Oracle_
SOA1\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.bpm.admin.lifecycle.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.classloader_11.1.1.jar;C:\app\oracle\MIDD
LE~1\product\fmw\ORACLE~1\modules\org.apache.commons.logging_1.0.4.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\org.apa
che.commons.beanutils_1.6.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.ucp_11.1.0.jar;c:\app\oracle\Middleware\p
roduct\fmw\Oracle_SOA1\soa\modules\oracle.rules_11.1.1\rulesdk2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.rules_11.1.1\rl.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.adf.model_11.1.1\adfm.jar;C:\app\oracle\MIDDL
E~1\product\fmw\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.xdk_1
1.1.0\xmlparserv2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\communications\modules\usermessaging-command_11.1.1.jar
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : c:\app\oracle\Middleware\product\fmw\Oracle_SOA1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.1.0.9.9
OUI version : 11.1.0.9.0
Log file location : c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\cfgtoollogs\opatch\opatch2013-07-18_14-33-45PM_1.log
OPatch detects the Middleware Home as "C:\app\oracle\Middleware\product\fmw"
Lsinventory Output file location : c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\cfgtoollogs\opatch\lsinv\lsinventory2013-07-18
_14-33-45PM.txt
Installed Top-level Products (1):
Oracle SOA Suite 11g 11.1.1.7.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
C:\Windows\system32>
Regards,
K -
Who can provide a link about advanced configuration of Java.util.logging?
Who can provide a link about advanced configuration of Java.util.logging?
Want to implement configurable handler attributes. For each handler has its own attribute set. I tried to implement a few handlers that extend FileHandler (actually the handlers do nothing, just for distingusih purpose), and put the customized handler attributes in configuration file and use logManager.readConfiguration() to load the configuration, somehow it does not work, but if I change the handler to standard handler like FileHander in configuration file, it works.
-
Linking Siebel Sample DB and SQL Server
Hi Gurus,
I have installed siebel in my laptop for learning purposes and i want to query the Sample DB in the process. Can anyone tell me how to link the sample DB and SQL Server 2008, so that i can query the sample db in the similar the way i query a normal siebel database server.
I already tried to create a linked server in SQL Server 2008 using Microsoft OLE DB Provider for ODBC drivers, but its throwing errors. Is it possible to create a linked server for sample DB.
Please let me know if there is any other way to query the sample DBIn the BIN directory you can find dbisqlc.exe.
Fill in the login credentials (SADMIN/SADMIN), don't set the ODBC, but go to the next tab and browse to the sample db.
It could be that you don't see it until you set the file filter to all files. -
Linksys WRP400 - VoIP Sample configuration guide for VoiceMeUp
Thanks to Linksys for that fine device. Few installations so far with this device and it has prooven his stability and reliability.
Note: Good T38 support and excellent QoS.
Here is a sample of configuration to VoiceMeUp
Linksys WRP400 - Sample configuration guide
[english] - [français]
Enjoy!
For more informations about VoiceMeUp VoIP services, please visit us at voicemeup.com
Message Edited by NothinElse on 08-25-2008 01:09 PMClearly this is too late to help you, but since this is showing up on Google and there are about a thousand views, this answer might be helpful to another.
Once you access the Voice Admin menu and provision your device for your VoIP provider, access to the Voice menu is subsequently "Locked".
Your VoiP provider's system has set a new unique password for the Voice menu once the provisioned device has synced with your providers system.
You should be able to get that password from the control panel on you VoIP account profile under "equipment" or a call to support or an e-mail request should garner the password.
The Login will be "admin" and the password provided will get you back into Voice menu system.
You will also need this password if you want to reset the Voice features back to factory defaults. Because of this system it appears that a WRP400 cannot be unlocked by merely using the reset button. -
Sample configuration to simulate PSTN
Hi,
I have couple of 3725 routers with FXO & FXS modules.
Looking for sample configuration to simulate PSTN cloud.
Regards
MeerThis URL might be help you.
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_example09186a008022eaa3.shtml -
Sample Configuration For Ethernet over MPLS.
I am looking for a sample configuration and scenario for the Ethernet over MPLS.I would appreciate if I get some explaination with it.How the LDP is configured for the directed sessions (as per Martini draft) and the auto discovery (as per kompella draft) with respect to Ethernet over MPLS.Cam anyone help me in this ?
Here's a sample EoMPLS configuration on the PE routers:
R1:
interface Loopback0
ip address 1.1.1.1 255.255.255.255
interface Ethernet0/0.10
encapsulation dot1Q 10
! 10 = vcid must match the vcid configured on the other side
mpls l2transport route 2.2.2.2 10
R2:
interface Loopback0
ip address 2.2.2.2 255.255.255.255
interface Ethernet0/0.10
encapsulation dot1Q 10
mpls l2transport route 1.1.1.1 10
The LDP directed session will be setup automatically by the router when the xconnect statement is configured.
Cisco IOS doesn't support the Kompella Draft.
For more information, see the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/atomt/ftatomtb.htm
Hope this helps,
Maybe you are looking for
-
Mac mini core solo running very slowly
Hi folks, long time reader, first time poster (sorry, couldn't resist): I just got a nice shiny new core solo mac mini 1.5 with stock ram and it feels like it runs slower than my 450 mhz dual processor powermac. Activity monitor shows that if I try t
-
How to run VS2005/CR on Windows 8.1?
Hi I have a VS2005 forms app that produces reports using Crystal Reports (10.2). I can run the app on Windows 8.1, but when I try to display a report I get an error saying that the CR runtime cannot be found. I've run the CR2005_x86 installer, appa
-
Can you listen to System.out ?
Good morning form. Is there a way to listen to System.out? This could be useful in testing. You could compile a test version of the app and report all Sys out activity then turn it of in production (or not). The point would be to be able to apply thi
-
Hello, We just bought a new macbook pro, and one of the first purchases we made was Pages'11. I am finding that while it "can" create word documents, when I open them on the PC the formatting is just off. These are not fancy documents we are creati
-
Conditional Checking in Script Logic
Could anyone please kindly enlightened me how I could code the following in the script logic? Scenario: IF A > 0, THEN B = C * D I have tried with SELECTCASE statement statement but all wouldn't work, I keep getting errors... SELECTCASE: *SELECTCASE