Link to "portlet provider" not accessible
Hi,
When you goto:
http://otn.oracle.com/sample_code/products/iportal/htdocs/notesdemo/notesimpl.html
then choose the link to download "Notes provider" or "readme" you get the error message:
Document not found. (WWC-46000)
Document not found. (WWC-46000)
Hi,
It worked for me. Try logging in to OTN.
btw, you migt want to try the latest Lotus Notes Portlets from
http://portalstudio.oracle.com/servlet/page?_pageid=3191&_dad=ops&_schema=OPSTUDIO
Regards,
Abhinav
Similar Messages
-
How can I change my store to US, now that I am in the US? A link in a previous thread says not accessible as the profile still shows different country..
As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country). -
Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigalebecause OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Server Error in '/' Application.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117
System.Data.SqlClient.SqlConnection.Open() +122
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +31
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +112
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +287
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1297
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +19
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +142
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +73
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +72
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +44
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +842
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082On what website/link did you received this error message ??
-
Removing customization link from portlet header.
Hi,
Could u suggest me out of the 2 ways to remove customization link from portlet header.I am using the default stock prices portlet in my page.
Where and how should i change the provider.xml file.
If not this how can I setShowEdit(False) which is one of the methods in MutablePortlet interface.How can i find this code related to Stock portlet.I mean where can we have access this code where the provider API's are used for some of the readymade portlets that oracle provides.
I am using release 1 of oracle portal.
Thanx
VipulHi,
I see two things that you could try :
first try to set the security level at the portlet level, then allow users to display your portlet, not to customize it. I know it's possible with tabs, maybe it can apply to you.
Else you also can modify the package of your portlet (or the provider.xml file if it's not the package). You should read the pl/sql code and find the variable concerning the customization link in the rendering part. It may be set to 'tru', just set it to 'false' and recompile.
I've done it when installing some portlets and it works : that way I could translate the portlet in franch, remove the help link, remove the detail link, and so on...
Hope this helps,
Gael. -
Error when creating portlet provider
I tried to call Forms Server application from Oracle Portal as
external application.
External application works fine if I execute link in External
application section.
Problem arrise when I tried to create Portlet Provider for this
external application.
Portlet Provider Implementation style is set to WEB. When I
choose Applay I get error:
Error: An error occurred when attempting to call the providers
register function. (WWC-43134)
An unexpected error occurred: ORA-29532: Java call terminated by
uncaught Java exception: java.io.IOException: Unexpected EOF.13
XML-0121 : (Fatal Error) End tag does not match start
tag 'INPUT'.
XML-0121 : (Fatal Error) End tag does not match start
tag 'FORM'.
XML-0121 : (Fatal Error) End tag does not match start
tag 'BODY'.
XML-0210 : (Fatal Error) Unexpected EOF. (WWC-43000)
An unexpected error occurred: java.io.IOException: Unexpected
EOF.13
XML-0121 : (Fatal Error) End tag does not match start
tag 'INPUT'.
XML-0121 : (Fatal Error) End tag does not match start
tag 'FORM'.
XML-0121 : (Fatal Error) End tag does not match start
tag 'BODY'.
XML-0210 : (Fatal Error) Unexpected EOF.
at oracle.webdb.provider.web.SoapResponseProcessor.getDocument
(SoapResponseProcessor.java:123)
at oracle.webdb.provider.web.SoapResponseProcessor.processSOAP
(SoapResponseProcessor.java:42)
at oracle.webdb.provider.web.HttpProviderDispatcher.dispatch
(HttpProviderDispatcher.java:877)
at
oracle.webdb.provider.web.HttpProviderDispatcher.registerProvider
(HttpProviderDispatcher.java:259)
(WWC-43000)
An unexpected error occurred: Unexpected EOF.
at oracle.xml.parser.v2.XMLError.flushErrors(XMLError.java:208)
at oracle.xml.parser.v2.XMLError.error(XMLError.java:114)
at oracle.xml.parser.v2.XMLError.error(XMLError.java:152)
at oracle.xml.parser.v2.XMLReader.popXMLReader
(XMLReader.java:380)
at oracle.xml.parser.v2.NonValidatingParser.parseElement
(NonValidatingParser.java:968)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement
(NonValidatingParser.java:237)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument
(NonValidatingParser.java:201)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:169)
at oracle.webdb.provider.web.SoapResponseProcessor.getDocument
(SoapResponseProcessor.java:117)
at oracle.webdb.provider.web.SoapResponseProcessor.processSOAP
(SoapResponseProcessor.java:42)
at oracle.webdb.provider.web.HttpProviderDispatcher.dispatch
(HttpProviderDispatcher.java:877)
at
oracle.webdb.provider.web.HttpProviderDispatcher.registerProvider
(HttpProviderDispatcher.java:259)
(WWC-43000)
I found unsolved forum with the same problem on Metalink: Doc
ID: 57590.996
How can I solve this problem?
Is it possible to add external application to portal as a
portlet without creatin a Portlet Provider?
Thanks,
Tomaz PodbersicTom,
A Connection timeout normally means that it is a valid
host.domain, but the listener was down or it could not access
that port.
You say that you can reach the URL, is it on the same domain?
Do you need a proxy to contact it. Can the Portal Machine see
it okay?
Sue -
NetWeaver Administrator reports "SLDirectory is not accessible"
Hi,
NetWeaver Administrator (http://host:port/nwa) on our SP12 XI installation reports:
System Landscape Directory is not accessible
Only local system can be administered
The SLD is actually on the same server and is working correctly, even accoding to the WebDynpro Content Administration.
Anyone know what might be wrong?
Thanks,
ThorstenHi Dmitriy,
the setup of the NetWeaver Administrator connections to SLD is described in the Monitoring Setup Guide. There is a quick link in Service Marketplace /nwa -> media library -> documentation -> Monitoring Setup Guide.
Basically the steps to connect NWA to SLD are the following (if you have already registered the systems of your system landscape to SLD and have set up the monitoring for the systems):
- In the Visual Administrator of the Central Monitoring System (CEN)(NWA-System) under Server->Services-> SLD Data Suppliers you have to enter the CIM Client Generation Settings (http connection to SLD with User/PWD). Mark the applications "sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar" and
"sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar" (This enables the NWA to get data from SLD.)
- In the ABAP Engine of CEN, the RFC connection SAPSLDAPI must be maintained, the connection data for SLD must be entered in transaction SLDAPICUST. (This connection helps entering monitored systems in SLD.) Additionally you require a JCo RFC Connection which points from the NWA system to the RFC connection SAPSLDAPI of CEN. Create this connection in the Visual Administrator of the NWA system under Server -> Services -> JCo RFC Provider.
- SLD gateway information has to be entered in transaction RZ70 of the Central Monitoring System. (With this transaction the data transport from CEN to SLD is managed.)
- For each administered system you can store the login data with help of the Destination Service of the NWA system. (If you don't do this you get login popups in NWA for all administered systems). You can enter the login data in Visual Administrator -> Server -> Services -> Destinations as described in the documentation.
All the steps are described in detail in the Monitoring Setup Guide.
Good luck
Bye,
Astrid -
forgot answers for security questions, my apple account has updated email address but the rescue email address for account is old and not accessible - do not know how to update that address so i can authorize new devices...
Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple throughiTunes Store Support. -
Remove Customize Link from Portlet - URGENT
Hi,
I have created an URL Application to be published as Portlet in my portal page. I need to include the Header of Portlet but not the Customize Link that appears in it. I tried modifying the Portlet Defaults but the option of removing Customize Link is not there. It only appears some data related to URL application...Please could you help me with this? Is there any patch I need to apply?
MANY THANKS
MarielaHi,
I see two things that you could try :
first try to set the security level at the portlet level, then allow users to display your portlet, not to customize it. I know it's possible with tabs, maybe it can apply to you.
Else you also can modify the package of your portlet (or the provider.xml file if it's not the package). You should read the pl/sql code and find the variable concerning the customization link in the rendering part. It may be set to 'tru', just set it to 'false' and recompile.
I've done it when installing some portlets and it works : that way I could translate the portlet in franch, remove the help link, remove the detail link, and so on...
Hope this helps,
Gael. -
Portlet Repository Not Showing Up
7 I have somehow lost the ability to see my Portlet Repository. I was
experimenting with permissions on the portlets (I didnt think a public
user
(normal user) should be able to add any of the Oracle-provided portlets
to
their page, and was trying to hide them from all users except the
portal_admin
users.), and I can no longer see any portlets as user portal30.
Actually,
the portlet repository looks empty.
7 When I try to add a new portlet to an existing page (region), I see
the
view by: category/provider option, but everything underneath it is
blank.
7 I still see the existing (customized/used) portlets on the right side
of the
window, and they seem to be working properly.
7 When I try to access the Portlet Repository from the Administer
display
(Display Portlet Repository), I get a completely blank page. No links
(to
refresh, etc.) are even shown at the top.
7 Im wondering if there is a database table I can look at and change
the
permissions on so that I see the portlets again. (Or, Maybe its not
that
simple) I dont believe that I have deleted anything, so I think its
just a
visibility problem.
7 ANY IDEAS?Web Cache shouldn't impact this (but I'm not saying that it isn't ;-)
Try the following:
1) refresh the portlet repository by clicking the "refresh" button in the provider registration page
2) check the security settings on the portlets - portlets will not be displayed if either the portal security (applied via the portlet repository) or portlet security (applied by adding a SecurityManager to a portlet) denies access -
Problem: Dynamic Page portlet is not displayed on a public-viewable page
I've written a little dynamic page portal that works nicely on secure pages, but when I create a new page and mark this page as "public viewable" - the portal is not displayed.
I created a 2nd public page and put several prebuilt and some of our own portlets onto this page - again none worked - except the prebuilt "login" portlet.
Is there a restriction that I'm not aware of?
Is there a documentation about this behaviour?
Can anyone post me a hit or link to documentatin?
Sincerly,
Art
Message was edited by:
user620777Make sure your Portlet Provider access is set to allow 'PUBLIC' access with Execute';
To set, navigate to Providers > Locally Built Providers
Follow 'Grant Access' link near provider name
Doc Reference, Section A.5.1.2 > http://download.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_portletbuilder.htm#BABIEFJG -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
The Secure Store Service application Secure Store Service Proxy is not accessible
I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Error while registering portlet provider WWC-43176
Hi,
I am not able to register my portlet provider. While i register, i get *"The provider URL specified may be wrong or the provider is not running. (WWC-43176)"* However, i am able to access my provider's test page, i tried using ip instead of host name but its still in vain. I replaced pdk jar files too...
The URL i am using for accessing is :
http://server01/application_one/providers/producer
I get below messages when i access test provider page through above URL :
Congratulations! You have successfully reached your Provider's Test Page.
Recognizing Portlets...
DemoPortlet
Recognizing initialization parameters...
resourceServletMapping : /pdkresource
Recognizing component versions...
ptlshare.jar version: 10.1.3.2.0
pdkjava.jar version: 10.1.3.2.0
Cheers!!!
Ujjwal B Soni
Edited by: user1584096 on 14 Sep, 2009 10:38 PM
Edited by: user1584096 on 14 Sep, 2009 10:40 PM
Edited by: user1584096 on 14 Sep, 2009 10:50 PMHi,
I resolved this error, actually, the provider page was under SSO authentication, removing it from portal settings resolved my issue. Now i am able to successfully register my provider.......
Cheers!!!
Ujjwal B Soni
<baroda, india, gujarat>
<+919998971048> -
Error when registering a portlet provider
I got the following error when registering a new portlet provider:
An error occurred when attempting to call the providers register function. (WWC-43134)
The following error occurred during the call to Web provider: 301: Moved Permanently (WWC-43147)
May I know what I may have done wrong?
I was able to open the portlet provider page by itself
ThanksCan you double check whether the provider node is accessible from the portal middle tier (ping)?
Maybe you are looking for
-
Voice Memos no longer syncing with iTunes
My voice memos used to automatically show in itunes. Now I can't see them or sync them. Has something changed? I have backed up my phone, but I a reluctant to go past the sync step where it says all information on this computer will replace what i
-
Help! Ios 5 not working :(
I have a Ipod Touch 4g Software version 4.3.3, I have been trying to update my Ipod to ios 5 but it keeps showing "Make sure your network settings are correct and your network connection is active, or please try again later" I've tried other computer
-
Custom Idoc clarifications..
Hi, How to know which segment or fields are added to the Standard IDOC. WE have some custom Z idocs but dont know which fields and segments are added to the Standard Idoc, so how to find those fields and segments which are added .. regards sai.
-
Forcing Domain OU selection in SCCM 2012 R2 UDI
We have added various domain OU to our UDI so that a newly imaged machine will join the correct OU during imaging. However, I can't figure out how to make OU selection required. When left as the default, it will select the top OU in the list. I've ad
-
J2ME update gui while running MIDlet
Hello all, I've got a method in my MIDlet which is to show a new form for about 2 seconds and then revert back to the application. It already does all of it's calculations right but it simply does not update the GUI until after the 'return' statement