Link user query to required print layout

Hi all,
I tried linking my user query to a required print layout for user reports.
I have followed the same procedure as given in  (Query PLD.pdf ) but when I try to save ,
I get the following error
Items were found with the same exclusive no [Message 101-19 ]
Can anybody help me with this
Thanks
Nirmala B.

finally got it

Similar Messages

  • How to use a query in the Print Layout Designer?

    I created a query with the query generator:
    SELECT T0.[Discount], T0.[NumOfDays], T2.[DocNum] FROM CDC1 T0, OQUT T2 INNER JOIN OCTG T3 ON T2.GroupNum = T3.GroupNum WHERE T2.[GroupNum]=T3.[GroupNum] AND  T0.[CdcCode] =  T3.[DiscCode]
    The result shows the cash discout (the days and the percentage) of every record.
    I need this query, because I want to design a sales order report.
    To show the payment conditions with cash discount I need to have the table CDC1 but when I create a new database field in the report I can't see that table.
    So I queried the table CDC1....
    Then I created a new database field and in the list box "table" I made the following steps:
    extras\customizing tools\user defined values - definition\search for saved query in user defined values
    But the problem is that I don't get the result of the query into my report.
    What's the problem? I don't know what I've done wrong...
    please help me

    Hi,
    I am creating the layout for a sales order which will be send to a customer.
    In that order the customer can see the payment conditions.
    It should look like this:
    net price: 1000,00 EUR
    19,00% taxes: 190,00 EUR
    gross price: 1190,00 EUR                          
    payment conditions:
    payable within 30 days net: 1190,00 EUR
    payable within 14 days with discount of 2 %: 1166,20 EUR
    to get the bold marked digits I need to have access on the following tables:
    OCTG and CDC1
    In the OCTG table I get the days (in this example 30)
    In the CDC1 table I get the days of cash discount and the percentage (in this example 14 and 2)
    but in the sales order layout in PLD only the OCTG table is shown when I create a database field and the CDC1 table isn't.
    So what can I do to get this?

  • Adding user defined field in print layout design of Bill of matrial Report

    I want to add "Drawing No" which is user defined field in Bill of Material report need immediate help .

    Hi,
    If you add the UDF in BOM-Title then the UDF will be in OITT table.
    If you add the UDF in BOM-Rows then the UDF will be in ITT1 table.
    You will find BOM-Title or BOM-Rows in Production Module (ie., in User Defined Fields --> Manage User Fields)
    In PLD, You can print the UDF if you search in the above said tables.
    Raja.S

  • New customized report using PLD or QUERY PRINT LAYOUT to show customers onl

    I am working with a Software Developing firm as an SAP Consultant.
    Please tell me how to create a new     customized     report displaying various details as required by the client in the report using PLD or Query Print Layout.
    Please help me asap.

    Hi,
    You can create queries using the Query Generator or the Query Wizard tools.
    After you have created your own queries, you can link them to a required print layout.
    for user reports.Look at:
    Tools --> Queries --> Query Print Layout
    Set there your query reports.
    Printing User-Defined Queries
    After you had linked a user-defined query to a user report template, you can now print it
    according to its linked print layout.
    There are two ways for printing your user-defined queries.
    1. Using the Query Print Layout window:
    • Select from the upper menu Tools 􀃆 Queries 􀃆 Query Print Layout.
    • Click the Reports tab page.
    • Click to highlight the required query you would like to print.
    • Click on the printer icon or select from the upper menu File 􀃆 Print.
    • The user-defined query is printed according to its linked print layout.
    2. Using the Queries Manager window:
    • Click the Queries Manager icon on the upper tool bar.
    • Click to highlight the required query you would like to print.
    • Click on the printer icon or select from the upper menu File 􀃆 Print.
    • The user-defined query is printed according to its linked print layout.
    Note! You can also print preview user-defined queries. Do so by selecting the Print
    Preview option as described in the methods above for printing your query.
    Btw, you could search the manual training files relate to query PLD in http://www.service.sap.com/smb
    Rgds,

  • User defined Query in Print Layout

    Is it possible to print output of a user defined query in a Print Layout. For example: in Quotation
    Kentish

    Thanks for your input.
    But its not related to Query Print Layout. I wanted to print a query result in a Sales Quotation so that when you print the Sales Quotation, you get the result of the Query on the Sales Quotation
    Thanks
    Kentish

  • Default Query Print Layout problem

    Hello:
        I have a query below SELECT T0.[ItemCode], T0.[Dscription], sum(T0.[Quantity]) as 'Quantity' FROM INV1 T0 WHERE month(T0.[DocDate]) =month([%0]) AND  year(T0.[DocDate]) = year([%0]) and T0.[ItemCode] IS NOT NULL GROUP BY T0.[ItemCode], T0.[Dscription] ORDER By T0.[ItemCode].
        Which basically output monthly inventory invoiced qty. It works fine. However when I try ti link to the default system print layout and try to print. The column 'quantity' become very small and cut off most of the number. How do I make it bigger? I have been trying to modify it for quiet a while now. Nothing seems to work. I think it's length is preset base on the column lenth in the table! If that's the case how do I make it wider?
        Also the default layout for user query are pretty weired. I think it's dynamically allocating spaces depends on number of column. But what happens when you do functions such as sum, avg..etc. There is no present length. So they just disregard it?
      Any help will be appreciated.. Thank You
    Sincerely Yours
    Bo Peng

    Hi Bo,
    I am asuming that u are not yet familiar with how to work with PLD (Print Layout Designer). I would suggest that u see some tutorials from the following link and then try to change that default layout according to ur own requirements
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/51c19891-0901-0010-6eb1-e71abf09298a
    Reagrds
    Rizwan Hafeez
    Team Lead
    SAP Addon Development Section
    Abacus Consulting - Pakistan

  • Doing user query layout

    Hello All:
       Does anyone have experience with user designed query template? It seems I have no way to customerize the width (fix width) of a column or do anything with the data. (calculate sub total etc)... In my own template (which strictly copied from system default template, I can delete the title, row text file and still the report bring out data. Does that mean I have no way to customerize the output?
    Anyone have documentation I should be following?

    Bo,
    Query Print layout > User Report (System)  can be saved as your own template.
    You can then open your new Query Layout template and pretty much change the Page width, size, header, footer, hide fields, borders and almost everything including the default printer, grid size, fonts, etc...
    You will not be able to define the individual field positions of Title and Row variable which represent the query data i.e., Repetitve Area Header and Details.  This is mainly because the number of header and line values will purely depend on your query. 
    NOTE:  Please do not delete any field from the template as everyfield in there is linked to something or the other.  You may resize them to
    Left = 0, Top = 0, Width = 0, Height = 0,  and also hide them.
    One draw back of Query layout template is, the Query once generated as a template if changed will not reflect in the Query layout.  You have to redo a whole new Query Print layout for the changes to reflect.  If you are 100% sure with the query only then you should click <b>"CREATE REPORT"</b> and generate the layout.   The Query layout cannot be added to the user Menu as the Print layout will not work.  It can only be viewed on the screen.
    Suda

  • Query Print Layout Authorization

    Hi Experts
    Iam facing a problem with  QPLD where i have given full authorization to particular user who is not super user .
    while selecting the print layout iam getting this error  ''You are  not permitted to do this action " that means no authorization
    the procedure which i have given as
    i went 2 manage categories in query manager and assigned one group to one user.
    In general authorization i have given authorization to print layout design ,Query print layout
    and under reports i have given authorization to particular group which i have given to user
    But iam unable to take print .So please kindly solve this Issue Asap ....
    Regards
    Jenny

    Hi
    Rahul there is no additional authorization given to query Pld i have checked in additional authorization .so is there any other to check please let me know
    Regards
    Jenny

  • Print layout in case of pre printed continous stationery

    Dear Experts,
    I have one query related to print layout designing.The issue is the PLD is set for an Invoice in the pre printed stationery & the printer out is take using continuous stationery the problem which i have faced is 1 page is printed properly but for 2nd page the print again starts from top so again the user have to do manual setting & print the 2nd page.
    Thanks & Regards-
    Manmath Das.

    Dear Manmath Das,
    It is too difficult to handle the print on pre printed continuous stationery by PLD. PLD is a very basic tool. You may only get it work by endless try and error to see.
    Thanks,
    Gordon

  • Query Print Layout-Linking a new header field with ref to repetitive area

    Hi,
    In a query print layout, the query result based on pending items from a specific vendor is to be displayed.
    On trying to insert a new database field (eg. Vendor Name), in the header area based on the pending item details in the repetitive area, the print output shows up a random vendor name (not related with the query result).
    The RELATE TO property-option of the header field does not list the repetitive area fields, and the LINK TO option does not help either.
    Please advise any other way to link the new db field to display the correct vendor name (contact person, address) as used in the query.
    thanks,
    Avinash
    Edited by: Avinash Sashee on Jun 30, 2009 1:14 PM

    Yes, the fields are part of the query.
    Eg. The pending items from a specific vendor(with vendor code, name) is listed in the repetitive area of the layout. But the requirement is to have the Vendor Name and Address details in the Header portion(i.e. Letter to Vendor). Please help me on this.
    thanks,
    Avi.

  • Add Query Print Layout at the User Menu

    Hi,
    I want to add a specific Query Print Layout in the user Menu.
    Is there any option?
    Thanks in advance

    Hi......
    I Dont think its possible in QPLD to give authorization for a Particular Query Print Layout.
    I'm not sure whether its possible in case of Crystal Report or not.....
    Regards,
    Rahul

  • How to use query print layout design

    i have a sql query and i want to see its result on report with the help of print layout design.

    In addition to Tuvia's answer, here is the printing procedure of query PLD:
    Printing User-Defined Queries
    Use
    After you have linked a user-defined query to a user report template, you can print it according to its linked print layout.
    Procedure
    To print a user-defined query, use one of the following two procedures:
    Using the Query Print Layout window:
    1. Choose Tools u2192 Queries u2192 Query Print Layout.
    2. Choose the Reports tab page and select the query you would like to print.
    3. Choose File u2192 Print.
    The user-defined query is printed according to its linked print layout.
    Using the Queries Manager window:
    1. From the toolbar, choose with the quick info text Queries Manager.
    2. Select the query you would like to print.
    3. Choose File u2192 Print.
    The user-defined query is printed according to its linked print layout.
    You can also display a print preview for user-defined queries. To do so, choose File u2192 Print Preview.
    Printing User-Defined Queries with Variables
    Use
    When a user-defined query contains variables, its linked print layout will also display the variables data and print them.
    In the print layout linked to that query, you can see that an additional area containing the condition's parameters was added
    There is pdf file relate to Query PLD in  the SAP service marketplace website.
    Rgds,

  • How too set query print layout parameters?

    Hello,
    simple task:
    1. Open "Query Print Layout...": SBO_Application.ActivateMenuItem("4868")
    2. Handle new reports form: SBO_Application.Forms.ActiveForm (I know, the better solution should be get form with proper TypeEx and highest TypeCount, but now it doesn't matter)
    3. Select row with required report: m.Columns.Item(0).Cells.Item(row).Click(BoCellClickType.ct_Regular, 0)
    4. Run printing: SBO_Application.ActivateMenuItem("519")
    5. Handle new parameters form: ???
    How can I get newly created form containing report parameters (TypeEx "4000")? I wanna set proper parameters and click "OK" to show printed report. Doesn't work handling:
    - FORM_LOAD in ItemEvent
    - MenuEvent for "519" (is only BeforeAction
    - PrintEvent (executed after accepting parameters)
    - ReportDataEvent (passed FormUID belongs to reports list, not parameters)
    In each event I've listed all forms and there is no form titled "Query - Selection Criteria" with expected TypeEx.
    Is there any way to achive this?

    when you activate print preview of printing on selected User Query Layout, you can cacth the ET_FORM_LOAD event of formTypeEx =4000
    It is working. Please note if you do not have this event, you may check your filters (?)
    Then you can populate your values. Based on my experience the click ok button is not working.
    Tip: Search the forum in year 2009 i have posted there sample codes
    Regards
    J

  • Print layout designer for develop report based on query

    Dear Experts/Gurus,
    I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
    Isn't the MPR report built not based on query ? I appreciate your answer. TIA
    Rgds,

    Hi,
    I am not sure I understand what's the problem:
    Is it the layout that is different or the data?
    Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
    Then you must include some non-default filter in SQL Profiler...
    ...but you can also use the logging functionality in B1 for that purpose:
    Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
    Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
    HTH,
    Frank

  • How to create authorization to access Query Print Layout?

    Hi again..
    i have 10 query print layout, and not every user can view this layout.
    I assume,
    report 1-3 only for user A,
    report 4-7 only for user B, and
    report 8-10 only for user C.
    How to create autorization for Query Print Layout?
    Thankyou for the help

    Dony,
    In order to createthe PL's of customize report (from Query Manager) you will have to go the Tools Tab of the Menu Bar in which you will have to click the Queries tab which will lead to a drop down menu which when clicked will lead to Quaery Print layout. You will have to choose your query based upon whether from the reports tab double click it to open the Query Print Layout Designer.
    Here again in the Menu Bar you will find the under the Tools the first tab is the PLD which when clicked you can do the same process as explined below
    When you go to the document ( Any Document ) in the tool bar you would find the 24th Icon to be the Print Layout Designer Tab when you click this it takes you to the layout designer window.... below there is tab named set as default when you click this the system would ask you 2 choices
    1. Set as default for all users
    2. Set as default for current user
    Which means that you will have to open each and every form?
    for each and every user and set them as default for the user.
    If you feel this answer is helpful then please do remember to reward points
    Regards,
    Nagesh.

Maybe you are looking for