Linux-pf kernel I FAILED! :) [solved]
Hi it's my first try to compile a kernel xD
I got this error:
ld final link failed no space left on device
make: *** [vmlinux] Error 1
==> ERROR: Failed to build().
The build failed.
Help
Last edited by pelasgos (2012-11-21 22:07:42)
WorMzy wrote:
Not as such. You could do some hokus pokus with your partitions, depending on what layout you have them in, but we'd need a lot more information from you before we could advise you on that.
What layout have you got your partitions in? (e.g. sda1 = 5GB root, sda2 = 20GB /home, etc...?)
If your / and /home partitions are adjacent, how much space are you using in /home?
Do you have important information on /home that you really need to keep?
Do you have anywhere you can back these files up to while you're messing with your partitions?
Do you have a LiveCD (or USB) to hand which you can use to make changes to your partitions?
/home is 280GB. / is 5gb /swap 8 GB and /boot 1GB I have Gparted live. And i don't want to keep anything so i don't need backup.
Similar Messages
-
Slow Shutdown on all Linux kernels but not on Linux-lts kernel
Been having this problem since the beginning of my Linux experience with Arch.
This is my uname -r output:
3.8.6-1-ARCH
This problem only happens on Linux main kernel, and never happen in Linux-lts kernel. Tried using the method mentioned in the wiki to produce a shutdown log and this is what I got:
[ 0.003774] Freeing SMP alternatives: 16k freed
[ 0.004541] ACPI: Core revision 20121018
[ 0.013344] ftrace: allocating 18216 entries in 36 pages
[ 0.020098] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056047] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.056666] perf_event_intel: PEBS disabled due to CPU errata
[ 0.056666] ... version: 2
[ 0.056666] ... bit width: 40
[ 0.056666] ... generic registers: 2
[ 0.056666] ... value mask: 000000ffffffffff
[ 0.056666] ... max period: 000000007fffffff
[ 0.056666] ... fixed-purpose events: 3
[ 0.056666] ... event mask: 0000000700000003
[ 0.076717] CPU 1 irqstacks, hard=f64ba000 soft=f64bc000
[ 0.076720] smpboot: Booting Node 0, Processors #1 OK
[ 0.006666] Initializing CPU#1
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.089933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.089948] Brought up 2 CPUs
[ 0.089951] smpboot: Total of 2 processors activated (7982.90 BogoMIPS)
[ 0.090093] devtmpfs: initialized
[ 0.090243] PM: Registering ACPI NVS region [mem 0x3f7c5400-0x3f7e7fb7] (142264 bytes)
[ 0.091141] RTC time: 17:25:11, date: 04/14/13
[ 0.091196] NET: Registered protocol family 16
[ 0.091416] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.091419] ACPI: bus type pci registered
[ 0.091492] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.091495] PCI: not using MMCONFIG
[ 0.094229] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=48
[ 0.094231] PCI: Using configuration type 1 for base access
[ 0.094334] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.094336] mtrr: probably your BIOS does not setup all CPUs.
[ 0.094338] mtrr: corrected configuration.
[ 0.095005] bio: create slab <bio-0> at 0
[ 0.095005] ACPI: Added _OSI(Module Device)
[ 0.095005] ACPI: Added _OSI(Processor Device)
[ 0.095005] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.095005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.097048] ACPI: EC: Look up EC in DSDT
[ 0.111410] ACPI: SSDT 3f7db90c 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.111870] ACPI: Dynamic OEM Table Load:
[ 0.111873] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.112026] ACPI: SSDT 3f7dbc10 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.112465] ACPI: Dynamic OEM Table Load:
[ 0.112468] ACPI: SSDT (null) 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.112715] ACPI: SSDT 3f7db844 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.113164] ACPI: Dynamic OEM Table Load:
[ 0.113167] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.113267] ACPI: SSDT 3f7dbb8b 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.113713] ACPI: Dynamic OEM Table Load:
[ 0.113716] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.150073] ACPI: Interpreter enabled
[ 0.153341] ACPI: (supports S0 S3 S4 S5)
[ 0.153361] ACPI: Using IOAPIC for interrupt routing
[ 0.153384] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.153936] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.153938] PCI: Using MMCONFIG for extended config space
[ 0.155733] ACPI: Power Resource [C2A5] (on)
[ 0.158672] ACPI: Power Resource [C1CE] (off)
[ 0.160729] ACPI: Power Resource [C3C1] (off)
[ 0.160799] ACPI: Power Resource [C3C2] (off)
[ 0.160867] ACPI: Power Resource [C3C3] (off)
[ 0.160935] ACPI: Power Resource [C3C4] (off)
[ 0.161009] ACPI: Power Resource [C3C5] (off)
[ 0.161845] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.162025] ACPI: No dock devices found.
[ 0.162033] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165252] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
[ 0.165256] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.165488] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.165491] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.171851] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.171895] PCI host bridge to bus 0000:00
[ 0.171899] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.171902] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.171905] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.171907] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.171910] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xfedfffff]
[ 0.171913] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[ 0.171915] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000dffff]
[ 0.171928] pci 0000:00:00.0: [8086:2a10] type 00 class 0x060000
[ 0.171982] pci 0000:00:02.0: [8086:2a12] type 00 class 0x030000
[ 0.171998] pci 0000:00:02.0: reg 10: [mem 0xe8400000-0xe84fffff 64bit]
[ 0.172008] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.172015] pci 0000:00:02.0: reg 20: [io 0x6000-0x6007]
[ 0.172059] pci 0000:00:02.1: [8086:2a13] type 00 class 0x038000
[ 0.172072] pci 0000:00:02.1: reg 10: [mem 0xe8500000-0xe85fffff 64bit]
[ 0.172169] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.172229] pci 0000:00:1a.0: reg 20: [io 0x6020-0x603f]
[ 0.172293] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.172319] pci 0000:00:1a.7: reg 10: [mem 0xe8600000-0xe86003ff]
[ 0.172433] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.172470] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.172495] pci 0000:00:1b.0: reg 10: [mem 0xe8604000-0xe8607fff 64bit]
[ 0.172607] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.172642] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.172760] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.172798] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.172915] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.172956] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.173074] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.173111] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.173229] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.173264] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.173324] pci 0000:00:1d.0: reg 20: [io 0x6040-0x605f]
[ 0.173376] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.173436] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.173482] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.173543] pci 0000:00:1d.2: reg 20: [io 0x6080-0x609f]
[ 0.173605] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.173630] pci 0000:00:1d.7: reg 10: [mem 0xe8608000-0xe86083ff]
[ 0.173744] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.173773] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.173877] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.173997] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.174004] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
[ 0.174009] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.174017] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.174077] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.174096] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.174109] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.174122] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.174135] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.174148] pci 0000:00:1f.1: reg 20: [io 0x60a0-0x60af]
[ 0.174206] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.174235] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
[ 0.174249] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
[ 0.174262] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
[ 0.174275] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
[ 0.174288] pci 0000:00:1f.2: reg 20: [io 0x60e0-0x60ff]
[ 0.174301] pci 0000:00:1f.2: reg 24: [mem 0xe8609000-0xe86097ff]
[ 0.174372] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.174462] pci 0000:00:1c.0: PCI bridge to [bus 08]
[ 0.174643] pci 0000:10:00.0: [14e4:4315] type 00 class 0x028000
[ 0.174715] pci 0000:10:00.0: reg 10: [mem 0xe8000000-0xe8003fff 64bit]
[ 0.175106] pci 0000:10:00.0: supports D1 D2
[ 0.175282] pci 0000:00:1c.1: PCI bridge to [bus 10]
[ 0.175291] pci 0000:00:1c.1: bridge window [mem 0xe8000000-0xe80fffff]
[ 0.175362] pci 0000:00:1c.4: PCI bridge to [bus 28]
[ 0.175368] pci 0000:00:1c.4: bridge window [io 0x4000-0x5fff]
[ 0.175374] pci 0000:00:1c.4: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.175475] pci 0000:30:00.0: [11ab:4357] type 00 class 0x020000
[ 0.175512] pci 0000:30:00.0: reg 10: [mem 0xe0000000-0xe0003fff 64bit]
[ 0.175531] pci 0000:30:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.175690] pci 0000:30:00.0: supports D1 D2
[ 0.175692] pci 0000:30:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180023] pci 0000:00:1c.5: PCI bridge to [bus 30]
[ 0.180029] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.180035] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.180143] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.180157] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.180160] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.180163] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.180166] pci 0000:00:1e.0: bridge window [mem 0x3f800000-0xfedfffff] (subtractive decode)
[ 0.180169] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.180171] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff] (subtractive decode)
[ 0.180207] pci_bus 0000:00: on NUMA node 0
[ 0.180222] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B6._PRT]
[ 0.180309] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C125._PRT]
[ 0.180364] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C139._PRT]
[ 0.180423] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13C._PRT]
[ 0.180512] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13D._PRT]
[ 0.180573] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.181965] ACPI: PCI Interrupt Link [C135] (IRQs *10 11)
[ 0.182059] ACPI: PCI Interrupt Link [C136] (IRQs *10 11)
[ 0.182150] ACPI: PCI Interrupt Link [C137] (IRQs 10 *11)
[ 0.182233] ACPI: PCI Interrupt Link [C138] (IRQs 10 11) *0, disabled.
[ 0.182323] ACPI: PCI Interrupt Link [C148] (IRQs *10 11)
[ 0.182412] ACPI: PCI Interrupt Link [C149] (IRQs *10 11)
[ 0.182496] ACPI: PCI Interrupt Link [C14A] (IRQs 10 11) *0, disabled.
[ 0.182536] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20121018/pci_link-184)
[ 0.182612] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.182612] vgaarb: loaded
[ 0.182612] vgaarb: bridge control possible 0000:00:02.0
[ 0.182612] PCI: Using ACPI for IRQ routing
[ 0.184638] PCI: pci_cache_line_size set to 64 bytes
[ 0.184796] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.184799] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.184802] e820: reserve RAM buffer [mem 0x3f7b0000-0x3fffffff]
[ 0.184920] NetLabel: Initializing
[ 0.184923] NetLabel: domain hash size = 128
[ 0.184924] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184940] NetLabel: unlabeled traffic allowed by default
[ 0.184979] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.184986] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.184991] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.193343] Switching to clocksource hpet
[ 0.200077] pnp: PnP ACPI init
[ 0.200102] ACPI: bus type pnp registered
[ 0.200287] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.200292] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.200295] system 00:00: [mem 0x00100000-0x3f7fffff] could not be reserved
[ 0.200301] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.200538] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.200553] pnp 00:02: [dma 4]
[ 0.200582] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.200617] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.200661] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.200757] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.200799] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.200845] pnp 00:07: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active)
[ 0.200982] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.200986] system 00:08: [io 0x0800-0x080f] has been reserved
[ 0.200990] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.200993] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.200997] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.201713] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.201717] system 00:09: [io 0x1000-0x107f] has been reserved
[ 0.201720] system 00:09: [io 0x1100-0x113f] has been reserved
[ 0.201723] system 00:09: [io 0x1200-0x121f] has been reserved
[ 0.201727] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.201730] system 00:09: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.201734] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.201737] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.201740] system 00:09: [mem 0xfed90000-0xfed99fff] has been reserved
[ 0.201745] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.202730] system 00:0a: [mem 0x000cec00-0x000cffff] has been reserved
[ 0.202734] system 00:0a: [mem 0x000d1000-0x000d3fff] has been reserved
[ 0.202738] system 00:0a: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.202741] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.202746] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.202762] pnp: PnP ACPI: found 11 devices
[ 0.202764] ACPI: ACPI bus type pnp unregistered
[ 0.240177] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.240183] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.240187] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000
[ 0.240200] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000
[ 0.240204] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
[ 0.240217] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000
[ 0.240230] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000
[ 0.240247] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.240250] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.240254] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.240257] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.240260] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.240263] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.240266] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.240272] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.240276] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.240279] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.240283] pci 0000:00:1c.4: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.240286] pci 0000:00:1c.5: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.240290] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.240294] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.240298] pci 0000:00:1c.0: PCI bridge to [bus 08]
[ 0.240303] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.240310] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.240316] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.240324] pci 0000:00:1c.1: PCI bridge to [bus 10]
[ 0.240328] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
[ 0.240336] pci 0000:00:1c.1: bridge window [mem 0xe8000000-0xe80fffff]
[ 0.240341] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.240350] pci 0000:00:1c.4: PCI bridge to [bus 28]
[ 0.240354] pci 0000:00:1c.4: bridge window [io 0x4000-0x5fff]
[ 0.240361] pci 0000:00:1c.4: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.240366] pci 0000:00:1c.4: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.240375] pci 0000:00:1c.5: PCI bridge to [bus 30]
[ 0.240379] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.240386] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.240392] pci 0000:00:1c.5: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.240400] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.240458] pci 0000:00:1e.0: setting latency timer to 64
[ 0.240463] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.240466] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.240469] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.240472] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xfedfffff]
[ 0.240474] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.240477] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff]
[ 0.240480] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.240482] pci_bus 0000:08: resource 1 [mem 0x40000000-0x401fffff]
[ 0.240485] pci_bus 0000:08: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.240488] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff]
[ 0.240490] pci_bus 0000:10: resource 1 [mem 0xe8000000-0xe80fffff]
[ 0.240493] pci_bus 0000:10: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.240496] pci_bus 0000:28: resource 0 [io 0x4000-0x5fff]
[ 0.240499] pci_bus 0000:28: resource 1 [mem 0xe4000000-0xe7ffffff]
[ 0.240501] pci_bus 0000:28: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.240504] pci_bus 0000:30: resource 0 [io 0x2000-0x2fff]
[ 0.240507] pci_bus 0000:30: resource 1 [mem 0xe0000000-0xe00fffff]
[ 0.240510] pci_bus 0000:30: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.240513] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.240515] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.240518] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.240520] pci_bus 0000:02: resource 7 [mem 0x3f800000-0xfedfffff]
[ 0.240523] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.240525] pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff]
[ 0.240571] NET: Registered protocol family 2
[ 0.240755] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.240797] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.240838] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.240883] TCP: reno registered
[ 0.240886] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240898] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240959] NET: Registered protocol family 1
[ 0.240973] pci 0000:00:02.0: Boot video device
[ 0.241213] PCI: CLS 64 bytes, default 64
[ 0.241257] Unpacking initramfs...
[ 0.315982] Freeing initrd memory: 2932k freed
[ 0.317982] apm: BIOS not found.
[ 0.318309] audit: initializing netlink socket (disabled)
[ 0.318336] type=2000 audit(1365960311.316:1): initialized
[ 0.330595] bounce pool size: 64 pages
[ 0.330608] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.332558] VFS: Disk quotas dquot_6.5.2
[ 0.332622] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.332855] msgmni has been set to 1739
[ 0.333128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.333159] io scheduler noop registered
[ 0.333162] io scheduler deadline registered
[ 0.333170] io scheduler cfq registered (default)
[ 0.333331] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.333503] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.333644] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.333787] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.333960] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.333961] vesafb: scrolling: redraw
[ 0.333964] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.334134] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.358190] Console: switching to colour frame buffer device 128x48
[ 0.382119] fb0: VESA VGA frame buffer device
[ 0.382150] intel_idle: does not run on family 6 model 15
[ 0.382186] GHES: HEST is not enabled!
[ 0.382203] isapnp: Scanning for PnP cards...
[ 0.695554] isapnp: No Plug & Play device found
[ 0.695613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.696373] i8042: PNP: PS/2 Controller [PNP0303:C2A2,PNP0f13:C2A3] at 0x60,0x64 irq 1,12
[ 0.698008] i8042: Detected active multiplexing controller, rev 1.1
[ 0.698778] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.698816] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.698844] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.698875] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.698903] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.699019] mousedev: PS/2 mouse device common for all mice
[ 0.699102] rtc_cmos 00:04: RTC can wake from S4
[ 0.699270] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.699304] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.699332] cpuidle: using governor ladder
[ 0.699334] cpuidle: using governor menu
[ 0.699336] EFI Variables Facility v0.08 2004-May-17
[ 0.699364] drop_monitor: Initializing network drop monitor service
[ 0.699462] TCP: cubic registered
[ 0.699595] NET: Registered protocol family 10
[ 0.699813] NET: Registered protocol family 17
[ 0.699824] Key type dns_resolver registered
[ 0.699983] Using IPI No-Shortcut mode
[ 0.700118] PM: Checking hibernation image partition /dev/sda2
[ 0.720765] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.732802] PM: Hibernation image not present or could not be loaded.
[ 0.732814] registered taskstats version 1
[ 0.733400] Magic number: 9:217:441
[ 0.733488] rtc_cmos 00:04: setting system clock to 2013-04-14 17:25:12 UTC (1365960312)
[ 0.733734] Freeing unused kernel memory: 556k freed
[ 0.733954] Write protecting the kernel text: 4120k
[ 0.733982] Write protecting the kernel read-only data: 1280k
[ 0.741543] systemd-udevd[45]: starting version 201
[ 0.743316] Linux agpgart interface v0.103
[ 0.745096] [drm] Initialized drm 1.1.0 20060810
[ 0.746117] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[ 0.746174] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.746731] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.747068] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.747585] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.747592] ACPI: Sleep Button [C2BE]
[ 0.747654] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.747709] ACPI: Lid Switch [C15B]
[ 0.747774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.747778] ACPI: Power Button [PWRF]
[ 0.752747] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 0.752752] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 0.752775] Console: switching to colour dummy device 80x25
[ 0.753012] i915 0000:00:02.0: setting latency timer to 64
[ 0.753276] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 0.753291] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.753292] [drm] Driver supports precise vblank timestamp query.
[ 0.753355] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.881041] [drm] initialized overlay support
[ 1.048674] fbcon: inteldrmfb (fb0) is primary device
[ 1.320023] tsc: Refined TSC clocksource calibration: 1994.999 MHz
[ 1.320027] Switching to clocksource tsc
[ 1.740025] Console: switching to colour frame buffer device 170x48
[ 1.745248] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.745251] i915 0000:00:02.0: registered panic notifier
[ 1.746676] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20121018/exoparg2-418)
[ 1.746691] ACPI Error: Method parse/execution failed [\_SB_.C003.C09E._DOD] (Node f642d6d8), AE_AML_PACKAGE_LIMIT (20121018/psparse-537)
[ 1.746700] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20121018/video-1163)
[ 1.750049] acpi device:00: registered as cooling_device0
[ 1.750335] ACPI: Video Device [C09E] (multi-head: yes rom: no post: no)
[ 1.750395] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.750448] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.790556] ACPI: bus type usb registered
[ 1.791412] usbcore: registered new interface driver usbfs
[ 1.791430] usbcore: registered new interface driver hub
[ 1.791721] usbcore: registered new device driver usb
[ 1.792299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.792666] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.792725] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.792730] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.792738] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.792794] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006020
[ 1.793124] hub 1-0:1.0: USB hub found
[ 1.793130] hub 1-0:1.0: 2 ports detected
[ 1.793310] ehci-pci: EHCI PCI platform driver
[ 1.793385] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.793390] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.793397] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.793442] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006040
[ 1.794088] hub 2-0:1.0: USB hub found
[ 1.794094] hub 2-0:1.0: 2 ports detected
[ 1.794241] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.794246] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.794253] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.794297] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006060
[ 1.795763] SCSI subsystem initialized
[ 1.795952] hub 3-0:1.0: USB hub found
[ 1.795958] hub 3-0:1.0: 2 ports detected
[ 1.796119] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.796124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.796132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.796174] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006080
[ 1.796348] hub 4-0:1.0: USB hub found
[ 1.796353] hub 4-0:1.0: 2 ports detected
[ 1.796513] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 1.796517] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.796524] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 5
[ 1.796540] ehci-pci 0000:00:1a.7: debug port 1
[ 1.797842] ACPI: bus type scsi registered
[ 1.800116] libata version 3.00 loaded.
[ 1.800447] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.800459] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe8600000
[ 1.810053] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.810391] hub 5-0:1.0: USB hub found
[ 1.810397] hub 5-0:1.0: 4 ports detected
[ 1.810890] ahci 0000:00:1f.2: version 3.0
[ 1.810969] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.811016] ahci: SSS flag set, parallel bus scan disabled
[ 1.811050] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.811054] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 1.811061] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.812147] scsi0 : ahci
[ 1.812347] scsi1 : ahci
[ 1.813441] scsi2 : ahci
[ 1.813516] ata1: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609100 irq 45
[ 1.813521] ata2: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609180 irq 45
[ 1.813524] ata3: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609200 irq 45
[ 1.813579] ata_piix 0000:00:1f.1: version 2.13
[ 1.813637] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.814023] scsi3 : ata_piix
[ 1.814701] scsi4 : ata_piix
[ 1.814769] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 1.814772] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 1.814817] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.814823] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.814832] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
[ 1.814850] ehci-pci 0000:00:1d.7: debug port 1
[ 1.816913] ata5: port disabled--ignoring
[ 1.818755] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.818763] ehci-pci 0000:00:1d.7: irq 20, io mem 0xe8608000
[ 1.826689] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.826868] hub 6-0:1.0: USB hub found
[ 1.826874] hub 6-0:1.0: 6 ports detected
[ 2.133364] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.136122] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.136127] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.136187] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 2.136192] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.137657] ata1.00: ATA-8: WDC WD2500BEKT-60V5T1, 12.01A12, max UDMA/100
[ 2.137660] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.140533] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.140537] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.140594] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 2.140598] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.142075] ata1.00: configured for UDMA/100
[ 2.142209] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEKT-6 12.0 PQ: 0 ANSI: 5
[ 2.186681] usb 6-5: new high-speed USB device number 3 using ehci-pci
[ 2.460022] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.576678] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 2.780023] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.799106] ata3.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
[ 2.817428] ata3.00: configured for UDMA/100
[ 2.819792] scsi 2:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
[ 2.823673] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.823725] sd 0:0:0:0: [sda] Write Protect is off
[ 2.823729] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.823751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.829602] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.829606] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.829816] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.892260] sda: sda1 sda2 sda3 sda4
[ 2.892707] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.187140] PM: Starting manual resume from disk
[ 3.187147] PM: Hibernation image partition 8:2 present
[ 3.187149] PM: Looking for hibernation image.
[ 3.190166] PM: Image not found (code -22)
[ 3.190169] PM: Hibernation image not present or could not be loaded.
[ 3.252550] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.836256] systemd[1]: systemd 201 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.849582] systemd[1]: Set hostname to <arch>.
[ 4.191136] systemd[1]: Cannot add dependency job for unit cpupower.service, ignoring: Unit cpupower.service failed to load: No such file or directory. See system logs and 'systemctl status cpupower.service' for details.
[ 4.191414] systemd[1]: Starting Login Prompts.
[ 4.191433] systemd[1]: Reached target Login Prompts.
[ 4.191449] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.191527] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.191541] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.191578] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.191590] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.191625] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.191637] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.191661] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.191673] systemd[1]: Starting Encrypted Volumes.
[ 4.191686] systemd[1]: Reached target Encrypted Volumes.
[ 4.191702] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.191749] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.191760] systemd[1]: Starting Paths.
[ 4.191774] systemd[1]: Reached target Paths.
[ 4.191807] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.191930] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.192007] systemd[1]: Starting udev Kernel Socket.
[ 4.192035] systemd[1]: Listening on udev Kernel Socket.
[ 4.192097] systemd[1]: Starting udev Control Socket.
[ 4.192128] systemd[1]: Listening on udev Control Socket.
[ 4.192143] systemd[1]: Starting Journal Socket.
[ 4.192199] systemd[1]: Listening on Journal Socket.
[ 4.199876] systemd[1]: Starting Set Up Additional Binary Formats...
[ 4.203660] systemd[1]: Starting udev Coldplug all Devices...
[ 4.257542] systemd[1]: Started Load Kernel Modules.
[ 4.257608] systemd[1]: Starting udev Kernel Device Manager...
[ 4.263615] systemd[1]: Mounting Configuration File System...
[ 4.270954] systemd[1]: Mounting Huge Pages File System...
[ 4.279309] systemd[1]: Starting Setup Virtual Console...
[ 4.289528] systemd[1]: Starting Apply Kernel Variables...
[ 4.293593] systemd[1]: Mounting Debug File System...
[ 4.300920] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.310244] systemd[1]: Starting Journal Service...
[ 4.318738] systemd[1]: Started Journal Service.
[ 4.318802] systemd[1]: Mounted FUSE Control File System.
[ 4.318827] systemd[1]: Expecting device dev-sda2.device...
[ 4.318857] systemd[1]: Starting File System Check on Root Device...
[ 4.344444] systemd[1]: Expecting device dev-sda4.device...
[ 4.711991] systemd-udevd[101]: starting version 201
[ 5.286858] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 5.571573] ACPI: Requesting acpi_cpufreq
[ 5.605351] ACPI: Fan [C3C6] (off)
[ 5.605428] ACPI: Fan [C3C7] (off)
[ 5.605498] ACPI: Fan [C3C8] (off)
[ 5.605569] ACPI: Fan [C3C9] (off)
[ 5.605638] ACPI: Fan [C3CA] (off)
[ 5.614901] ACPI: AC Adapter [C244] (on-line)
[ 5.636608] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.636612] ACPI: Thermal Zone [TZ3] (41 C)
[ 5.664141] ACPI: Battery Slot [C245] (battery present)
[ 5.673128] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.673132] ACPI: Thermal Zone [TZ4] (27 C)
[ 5.678874] thermal LNXTHERM:02: registered as thermal_zone2
[ 5.678878] ACPI: Thermal Zone [TZ5] (20 C)
[ 5.679888] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5.692884] thermal LNXTHERM:03: registered as thermal_zone3
[ 5.692888] ACPI: Thermal Zone [TZ0] (48 C)
[ 5.697365] thermal LNXTHERM:04: registered as thermal_zone4
[ 5.697369] ACPI: Thermal Zone [TZ1] (45 C)
[ 5.702641] wmi: Mapper loaded
[ 5.765684] sky2: driver version 1.30
[ 5.765753] sky2 0000:30:00.0: Yukon-2 FE+ chip revision 0
[ 5.765870] sky2 0000:30:00.0: irq 47 for MSI/MSI-X
[ 5.766172] sky2 0000:30:00.0 eth0: addr d8:d3:85:02:ae:8a
[ 5.823030] cfg80211: Calling CRDA to update world regulatory domain
[ 5.842289] Monitor-Mwait will be used to enter C-1 state
[ 5.842342] Monitor-Mwait will be used to enter C-2 state
[ 5.842349] Monitor-Mwait will be used to enter C-3 state
[ 5.842354] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.842373] ACPI: acpi_idle registered with cpuidle
[ 5.842387] Switching to clocksource hpet
[ 5.856977] lib80211: common routines for IEEE802.11 drivers
[ 5.856981] lib80211_crypt: registered algorithm 'NULL'
[ 6.090739] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 6.105525] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.133580] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.133684] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 6.135374] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C003.C004.C0D8 1 (20121018/utaddress-251)
[ 6.135383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.135388] ACPI Warning: 0x00001130-0x0000113f SystemIO conflicts with Region \_SB_.C003.C004.C0EA 1 (20121018/utaddress-251)
[ 6.135392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.135394] ACPI Warning: 0x00001100-0x0000112f SystemIO conflicts with Region \_SB_.C003.C004.C0EA 1 (20121018/utaddress-251)
[ 6.135399] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.135401] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.158779] systemd-udevd[139]: renamed network interface eth0 to lan
[ 6.229949] iTCO_vendor_support: vendor-support=0
[ 6.251748] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 6.267907] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 6.268519] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.336370] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.336404] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 6.337222] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.355895] wl: module license 'Mixed/Proprietary' taints kernel.
[ 6.355901] Disabling lock debugging due to kernel taint
[ 6.371194] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 6.465140] usbcore: registered new interface driver usbhid
[ 6.465144] usbhid: USB HID core driver
[ 6.466336] lib80211_crypt: registered algorithm 'TKIP'
[ 6.466625] eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 6.475157] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input9
[ 6.476275] hid-generic 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.0-2/input0
[ 6.490253] systemd-udevd[140]: renamed network interface eth0 to wlan
[ 6.563265] media: Linux media interface: v0.10
[ 6.571119] Linux video capture interface: v2.00
[ 6.592516] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 6.650253] input: CNF8243 as /devices/pci0000:00/0000:00:1d.7/usb6/6-5/6-5:1.0/input/input10
[ 6.650363] usbcore: registered new interface driver uvcvideo
[ 6.650366] USB Video Class driver (1.1.1)
[ 6.947552] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 6.988984] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 7.014010] Adding 1023996k swap on /dev/sda2. Priority:-1 extents:1 across:1023996k
[ 7.414465] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 17.413000] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 17.418247] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 17.434571] EXT4-fs (sda4): re-mounted. Opts: data=ordered,commit=0
[ 17.439164] EXT4-fs (sda4): re-mounted. Opts: data=ordered,commit=0
[ 22.143740] fuse init (API version 7.20)
[ 24.877691] sky2 0000:30:00.0 lan: enabling interface
[ 24.877796] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 148.737343] cpufreq-nforce2: No nForce2 chipset.
[ 407.922665] cfg80211: Calling CRDA to update world regulatory domain
[ 408.230275] sky2 0000:30:00.0 lan: disabling interface
[ 409.060592] systemd-journald[108]: Received SIGTERM
[ 409.073407] systemd[1]: Unmounted FUSE Control File System.
[ 409.073755] systemd[1]: Unmounted Configuration File System.
[ 409.074064] systemd[1]: Unmounted Huge Pages File System.
[ 409.076866] systemd[1]: Unmounted Debug File System.
[ 409.080249] systemd[1]: Unmounted POSIX Message Queue File System.
[ 409.083569] systemd[1]: Unmounted /media/budiman/Images/Dropbox-Uploads.
[ 409.083785] systemd[1]: media-budiman-Images-Dropbox\x2dImages.mount mount process exited, code=exited status=32
[ 409.083841] systemd[1]: Failed unmounting /media/budiman/Images/Dropbox-Images.
[ 409.084742] systemd[1]: Unmounted /home/budiman/Pictures/Dropbox-Images.
[ 409.084967] systemd[1]: home-budiman-Pictures-Dropbox\x2dUploads.mount mount process exited, code=exited status=32
[ 409.085027] systemd[1]: Failed unmounting /home/budiman/Pictures/Dropbox-Uploads.
[ 409.096913] systemd[1]: Unmounted /home/budiman/Dropbox.
[ 409.097825] systemd[1]: Unmounted /home/budiman/Videos.
[ 409.103734] systemd[1]: Unmounted /home/budiman/Music.
[ 409.116944] systemd[1]: Unmounted /home/budiman/Downloads.
[ 409.120111] systemd[1]: Unmounted /home/budiman/Documents.
[ 409.120526] systemd[1]: Unmounted /tmp.
[ 409.120550] systemd[1]: Unmounting /home/budiman/Pictures...
[ 409.136765] systemd[1]: Unit media-budiman-Images-Dropbox\x2dImages.mount entered failed state
[ 409.137341] systemd[1]: Unit home-budiman-Pictures-Dropbox\x2dUploads.mount entered failed state
[ 409.150110] systemd[1]: Unmounted /home/budiman/Pictures.
[ 409.150136] systemd[1]: Unmounting /media/budiman...
[ 409.241379] systemd[1]: Stopped Journal Service.
[ 409.246738] systemd[1]: Unmounted /media/budiman.
[ 409.246774] systemd[1]: Starting Unmount All Filesystems.
[ 409.246796] systemd[1]: Reached target Unmount All Filesystems.
[ 409.246812] systemd[1]: Stopping Local File Systems (Pre).
[ 409.246828] systemd[1]: Stopped target Local File Systems (Pre).
[ 409.246840] systemd[1]: Stopping Remount Root and Kernel File Systems...
[ 409.246938] systemd[1]: Stopped Remount Root and Kernel File Systems.
[ 409.246969] systemd[1]: Stopping Journal Socket.
[ 409.247013] systemd[1]: Closed Journal Socket.
[ 409.247029] systemd[1]: Starting Store Sound Card State...
[ 409.250674] systemd[1]: Unmounting /...
[ 409.276838] systemd[1]: Started Store Sound Card State.
[ 409.276933] systemd[1]: Starting Shutdown.
[ 409.276952] systemd[1]: Reached target Shutdown.
[ 409.276977] systemd[1]: Starting Final Step.
[ 409.276992] systemd[1]: Reached target Final Step.
[ 409.277012] systemd[1]: Starting Power-Off...
[ 409.321924] systemd[1]: Shutting down.
[ 409.488755] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 409.517972] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 409.518032] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 409.700368] EXT4-fs (sda3): re-mounted. Opts: (null)
The problem is the log doesn't even print the error report as you can see it. The delay is not shown in the console either, it was just like:
[ 10.0000] Power Down....
and my laptop was halting there for like 30-40 seconds before completely shutdown.
Systemctl output:
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys...t_misc.automount loaded active running Arbitrary Executable File Fo
sys-devi...und-card0.device loaded active plugged 82801H (ICH8 Family) HD Audi
sys-devi...-net-wlan.device loaded active plugged BCM4312 802.11b/g LP-PHY
sys-devi...0-net-lan.device loaded active plugged 88E8042 PCI-E Fast Ethernet
sys-devi...-sda-sda1.device loaded active plugged WDC_WD2500BEKT-60V5T1
sys-devi...-sda-sda2.device loaded active plugged WDC_WD2500BEKT-60V5T1
sys-devi...-sda-sda3.device loaded active plugged WDC_WD2500BEKT-60V5T1
sys-devi...-sda-sda4.device loaded active plugged WDC_WD2500BEKT-60V5T1
sys-devi...block-sda.device loaded active plugged WDC_WD2500BEKT-60V5T1
sys-devi...block-sr0.device loaded active plugged hp_CDDVDW_TS-L633N
sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/platform/serial
sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/platform/serial
sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial
sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subs...vices-lan.device loaded active plugged 88E8042 PCI-E Fast Ethernet
sys-subs...ices-wlan.device loaded active plugged BCM4312 802.11b/g LP-PHY
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File Sys
home-bud...-Documents.mount loaded active mounted /home/budiman/Documents
home-bud...-Downloads.mount loaded active mounted /home/budiman/Downloads
home-budiman-Dropbox.mount loaded active mounted /home/budiman/Dropbox
home-budiman-Music.mount loaded active mounted /home/budiman/Music
home-bud...\x2dImages.mount loaded active mounted /home/budiman/Pictures/Dropb
home-bud...x2dUploads.mount loaded active mounted /home/budiman/Pictures/Dropb
home-budiman-Pictures.mount loaded active mounted /home/budiman/Pictures
home-budiman-Videos.mount loaded active mounted /home/budiman/Videos
media-bu...\x2dImages.mount loaded active mounted /media/budiman/Images/Dropbo
media-bu...x2dUploads.mount loaded active mounted /media/budiman/Images/Dropbo
media-budiman.mount loaded active mounted /media/budiman
proc-sys...infmt_misc.mount loaded active mounted Arbitrary Executable File Fo
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
systemd-...ord-console.path loaded active waiting Dispatch Password Requests t
systemd-...ssword-wall.path loaded active waiting Forward Password Requests to
cpupower.service loaded active exited Apply cpupower configuration
dbus.service loaded active running D-Bus System Message Bus
display-manager.service loaded active running Light Display Manager
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
preload.service loaded active running Adaptive readahead daemon
rtkit-daemon.service loaded active running RealtimeKit Scheduling Polic
systemd-binfmt.service loaded active exited Set Up Additional Binary For
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-remount-fs.service loaded active exited Remount Root and Kernel File
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...es-setup.service loaded active exited Recreate Volatile Files and
systemd-...-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-...sessions.service loaded active exited Permit User Sessions
systemd-...le-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
wpa_supplicant.service loaded active running WPA supplicant
dbus.socket loaded active running D-Bus System Message Bus Soc
dmeventd.socket loaded active listening Device-mapper event daemon F
systemd-initctl.socket loaded active listening /dev/initctl Compatibility N
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...d-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda2.swap loaded active active /dev/sda2
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary D
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
82 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
lines 68-90/90 (END)
dev-sda2.swap loaded active active /dev/sda2
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
This is my lsmod output:
Module Size Used by
cpufreq_userspace 2792 2
fuse 59758 2
cpufreq_powersave 962 0
joydev 7403 0
hid_generic 741 0
uvcvideo 63656 0
videobuf2_vmalloc 2636 1 uvcvideo
videobuf2_memops 1715 1 videobuf2_vmalloc
videobuf2_core 23893 1 uvcvideo
lib80211_crypt_tkip 8078 0
videodev 81179 2 uvcvideo,videobuf2_core
media 8545 2 uvcvideo,videodev
usbhid 35987 0
hid 69458 2 hid_generic,usbhid
wl 2426627 0
sky2 43537 0
lib80211 3037 2 wl,lib80211_crypt_tkip
hp_wmi 6702 0
coretemp 4990 0
cfg80211 368786 1 wl
snd_hda_codec_idt 47572 1
sparse_keymap 2582 1 hp_wmi
iTCO_wdt 4471 0
iTCO_vendor_support 1545 1 iTCO_wdt
psmouse 77896 0
serio_raw 4001 0
microcode 10864 0
snd_hda_intel 28850 4
snd_hda_codec 87310 2 snd_hda_codec_idt,snd_hda_intel
rfkill 12625 3 cfg80211,hp_wmi
lpc_ich 10077 0
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 62883 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
snd_timer 14846 1 snd_pcm
snd 44486 14 snd_hwdep,snd_timer,snd_hda_codec_idt,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
thermal 7045 0
ac 1892 0
fan 2133 0
acpi_cpufreq 9166 1
mperf 991 1 acpi_cpufreq
battery 5658 0
container 1993 0
wmi 7163 1 hp_wmi
evdev 7560 9
processor 24359 3 acpi_cpufreq
ext4 430663 2
crc16 1091 1 ext4
jbd2 65750 1 ext4
mbcache 4322 1 ext4
sr_mod 12924 0
sd_mod 28242 4
cdrom 30060 1 sr_mod
ata_generic 2434 0
pata_acpi 2367 0
ata_piix 20760 0
ahci 19268 3
libahci 17379 1 ahci
libata 146969 5 ahci,pata_acpi,libahci,ata_generic,ata_piix
scsi_mod 110134 3 libata,sd_mod,sr_mod
uhci_hcd 21448 0
ehci_pci 3404 0
ehci_hcd 42551 1 ehci_pci
usbcore 148267 5 uhci_hcd,uvcvideo,ehci_hcd,ehci_pci,usbhid
usb_common 622 1 usbcore
i915 489921 3
video 9834 1 i915
button 3717 1 i915
i2c_algo_bit 4583 1 i915
intel_agp 8720 1 i915
intel_gtt 10212 3 i915,intel_agp
drm_kms_helper 31122 1 i915
drm 181032 4 i915,drm_kms_helper
agpgart 22207 3 drm,intel_agp,intel_gtt
i2c_core 18994 5 drm,i915,drm_kms_helper,i2c_algo_bit,videodev
My current hypotheses is the acpi_cpufreq that make this problem happens because when I booted into the lts kernel that module is not even loaded. But I can't even blacklist it because even if I make a modprobe.conf to disable it from loading it still be loaded automatically by the kernel. Any help here will be greatly appreciated, I'm not a "just post any problem before trying myself" person. I've tried every method by reading wikis and forums without any success, this is even my first post here . But this problem has been troubling me for a very long time. So please help me guys
Tell me what information do I miss and I'll post it immediately.Did a fresh install and still having the same problem. Giving up now. Mod can now close this thread
-
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform?
Hi,
My question is the same as the subject written.
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform? Basically, first, I can't find the OAS9i "*.cp" image files for RedHat Kernel 2.2.16 or later use, second, what I can download from OTN site is V1.0.2.2.1 which is for Linux RedHat Kernel 2.4.3-12 or later use. And I downloaded all the files which OAS9i version is V1.0.2.2.1, and failed to install on my platform. So I want to know is there anybody installing OAS9i and Portal successfully on RedHat 6.2(Kernel 2.2.19, glibc 2.1.3)? Or can share on other RedHat version had any successful installation processes or suggestion. Thanks in advance.
Regards!
Frank9iAS 1.0.2.x is only supported on Redhat 7.0 and Suse 7.2
Portal PM -
Will Oracle 10.1.0.2 be ok after upgrading linux e3 kernel to 2.4.21-53.EL
Hi, all
I have an oracle 10g(10.1.0.2) database running on a linux server (RedHat Linux e3). The linux kernel is 2.4.21-20.ELsmp.
Because we need to upgrade the ASM to make the backup stuff run well, we have to upgrade the linux kernel. The latest linux e3 kernel is 2.4.21-53.ELsmp, but the latest ASMlib 2.0 driver is for 2.4.21-52.ELsmp.
Could I upgrade the ASM under the -53 kernel? Or we have to install the -52 kernel?
Thanks a lot!
QianWhether you can is far less important than whether you should.
Open an SR with Oracle Support. -
Linux-libre kernel + b43 wifi driver
I decided to try the linux-libre kernel from AUR, and I ran into an issue with the b43 driver. My card is supported by the b43 driver, I have been using it without any issues on the vanilla kernel, but the linux-libre kernel hiccups with the firmware.
When I try to do something with my wifi card under linux-libre, it complains that it can't find "b43-open/unicode15.fw". I decided to copy said file from "/lib/firmware/b43/" to "/lib/firmware/b43-open/", but it complained that the firmware was proprietary. After doing a bit of research on Google, I came across several pages that I needed to use b43-tools and the openfwwf firmware. This combination gives me a 'unicode5.fw', not a 'unicode15.fw' (note that one is a 5, and the other is a 15, linux-libre asks for 15). I decided to try to copy it over anyway, without changing the name, and removed the proprietary file (unicode15.fw) from "/lib/firmware/b43-open/", but it went back to asking for "b43-open/unicode15.fw".
I did unload/reload the b43 driver after each firmware file move (modprobe -rv b43 && sleep 5 && modprobe -v b43). What I did not try was renaming 'unicode5.fw' to 'unicode15.fw', I didn't think that made any sense to try, since obviously they could be quite different and might cause problems.
I have not been able to find any other suggestions on Google, so if anybody has any suggestions, please let me know.
BTW, here's the lspci entry for my card (again, it works fine under vanilla kernel) (hopefully this forum supports code blocks, I don't see any buttons for it):
02:00.0 Network Controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)You have a Broadcom card of core_rev 15 and you would need a ucode15.asm to build ucode15.fw binary. Unfortunately, it seems openfwwf project has been able to reverse engineer just revision 5 of these cards (ucode5.asm).
Please note s/unicode/ucode. ucode = microcode. Unicode doesn't make sense in this context. -
Simple compare condition fails [Solved: Bug 4619731]
Edit: I have found the root of the problem, and Simple compare condition fails [Solved: Bug 4619731]. I have opened a Service Request 7045745.993 on the problem.
Original text:
I have encountered the most bizarre bug today. An associate is trying to debug a 1900 line package that was NOT terminating a loop properly.
The package has the code:
Exit when x <> y;where x and y are VARCHAR2(8) variables.
The problem is that even though the values were UNequal, the loop never ended. We added dbms_output debugging code to display x and y, and we could easily see that their values were NOT equal.
For instance, one was 19824E1A and the other was 19824E2A. Or one was 19824E1A while the other was 99999999.
I even added a block of code re-testing the condition like this:
If x <> y then
dbms_output.put_line(x||'<>'||y);
Else
dbms_output.put_line(x||'='||y);
End if;But no matter what the values of x and y, it always reported them equal.
I found two workarounds:
1. concatenate a character (I used a period) to the end of each variable in the condition.
Exit when x||'.' <> y||'.'2. Or, add an anonymous block before or after the Exit when..., such as:
Declare
v varchar2(2);
Begin
v := 'AB';
End;Curiously, when I replaced the v := 'AB'; with NULL;, the bug came back.
This bug occurs on Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
I am not sure where to start to try to solve or report this problem. It pretty much destabilizes the entire PL/SQL programming foundation for all our packages. It leaves me wondering where else the code may be failing.
Has anyone seen something like this reported before?
Edited by: Steve Cosner on Aug 27, 2008 10:05 PMNo offense taken, SY. I was just trying to express how aware I am of the issue of comparing null values in condition statements.
All I can do here is underscore that it is not an issue with null values. The problem is with the statement in the first line. To prove that it was not null values, I coded the second line following the first:
exit when x <> y;
dbms_output.put_line('x='||x ||' and y='||y);The output from the run showed in the first pass through the loop, x and y were equal and were not null. So the process ran correctly that time. But in subsequent passes through the loop, they were NOT equal and were not null, but the debugging code was executed.
There is no way the values were null.
I certainly wondered about the null issue when I concatenated a character to the variables in the conditional test. But my debugging lines first confirmed that they were not null. I suspect more that the bug has something to do with the size of the package and the variables being exactly eight characters, which is 64 bits, which has special significance in many computer languages.
Regarding your concern of the variable names and scope issues, the actual variable names in the actual code can be seen below (I just used x and y for simplicity within this thread):
LOOP
EXIT WHEN V_LAST_PERIOD <>
SIPK0003.COURSE_ADJUST_REC.ACAD_REC_PERIODwhile the silly anonymous block that caused the process to work, using the variable named v, was the actual code. There is no way we use simple one-character variable names in a 1900 line package. There is no way the scope of variable V extended outside the embedded anonymous block. My point was that somehow, changing the size of the compiled package object, or at least the size of the code generated for the loop process caused the package to run correctly. In fact, thinking about the
Declare V... Begin Null; End; sequence, I'll bet the PL/SQL compiler is sharp enough to notice that it was a do-nothing block, so never included it in the compiled object. As soon as I assigned V a value, the code WAS included, so the size of the generated code for the loop changed, and somehow, that caused it to run correctly.
Regarding the use of the package.record.column value above, we even copied the value to a local variable, and then used the local variable in the Exit When statement. Doing that made no difference. -
Linux-one - kernel for acer aspire one
i'm recently bought an acer aspire one d255e and found the linux-one kernel in the AUR. linux-one
i would like to know what your comments, tips and improvements are.
i'm not the maintainer of the package just an user. I will try to build this kernel this afternoon and post some comments.
please feel free to comment if this kernel work in your acer aspire one and what modification you have done in the config to get your aao working.
cheers
edit: typo
Last edited by warenoso (2011-08-15 23:06:43)I have a aao 532h with an Atom N450 processor and use the kernel-netbook package which also supports Atom N550 processors. It works 'out of the box' on my machine and the only thing I would think to check in the config for yours is support for your graphics which I believe is Intel GMA 3150.
I haven't tried the linux-one package as it's for the first aao netbook that came out which didn't have bluetooth. -
Safe to remove linux kernel when using linux-lts kernel?
I'm using the `linux-lts` kernel on my work machine (less reboots after updates); I know in theory it should be safe to remove the normal `linux` kernel (and it's dependencies) but does anyone know if it is safe in practice? Nothing that assumes there will always be a `linux` package because without it there couldn't be a running system?
This should be as easy to figure out, as comparing dependencies can be:
linux-lts:
Required By (5)
archboot
nvidia-lts
r8168-lts
virtualbox-archlinux-modules-lts
virtualbox-modules-lts
linux:
Required By (15)
archboot
cdfs
fcpci
fcpcmcia
lirc
ndiswrapper
nvidia
open-vm-tools-modules
r8168
rt3562sta
vhba-module
virtualbox-archlinux-modules
virtualbox-archlinux-modules (testing)
virtualbox-modules
virtualbox-modules (testing)
That might mean, most notably, that infrared ports and cdemu-driven image mounts won't work with the lts kernel (or at least should not without pulling in the normal kernel). -
Lots of hard locks and kernel crashes/oops ["SOLVED"-bad motherboard]
I have been experiencing a lot of hard locks and kernel crashes/oops(es?) lately. This computer has always had random freezes in both WinXP and Linux (various distributions -- including live cds).
Here is my latest crash (from dmesg):
PCI: setting IRQ 12 as level-triggered
PCI: Found IRQ 12 for device 0000:02:05.0
Bad pte = dfbdf272, process = ???, vm_flags = 3f3f, vaddr = b7e6d0ac
Pid: 1470, comm: load-modules.sh Not tainted 2.6.25-ARCH #1
[<c016e775>] handle_mm_fault+0x2c5/0x850
[<c011d0c9>] do_page_fault+0x2a9/0x790
[<c014169d>] hrtimer_start+0xdd/0x1e0
[<c0125a16>] hrtick_set+0xc6/0x140
[<c03053ef>] schedule+0x3af/0x850
[<c01437e5>] getnstimeofday+0x35/0xe0
[<c01419e8>] ktime_get+0x18/0x40
[<c0305a76>] preempt_schedule+0x56/0x70
[<c012386f>] wake_up_new_task+0x8f/0xd0
[<c0128643>] do_fork+0xd3/0x2b0
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c0300000>] cpu_init+0x220/0x29a
=======================
VM: killing process load-modules.sh
lshwd output:
00:00.0 Class 0600: Intel Corp.|82865G [Springdale-G] Chipset Host Bridge (intel-agp)
00:01.0 Class 0604: Intel Corp.|82865G/PE/P Processor to AGP Controller (unknown)
00:1d.0 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.1 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.2 Class 0c03: Intel Corp.|USB Controller (uhci_hcd)
00:1d.3 Class 0c03: Intel Corp.|82801EB USB EHCI Controller #2 (uhci_hcd)
00:1d.7 Class 0c03: Intel Corp.|USB Enhanced Controller (ehci-hcd)
00:1e.0 Class 0604: Intel Corp.|82820 815e (Camino 2) Chipset PCI (hw_random)
00:1f.0 Class 0601: Intel Corp.|82801EB ISA Bridge (LPC) (i810-tco)
00:1f.1 Class 0101: Intel Corp.|82801EB ICH5 IDE (ata_piix)
00:1f.2 Class 0101: Intel Corp.|82801EB ICH5 IDE (SATA) (ata_piix)
00:1f.3 Class 0c05: Intel Corp.|82801EB SMBus (i2c-i801)
01:00.0 Class 0300: nVidia Corp.|NV18 GeForce4 MX440 AGP 8x (nv)
02:05.0 Class 0401: Avance Logic Inc.|ALS4000 Audio Chipset (snd-als4000)
02:07.0 Class 0200: D-Link System Inc.|DFE 530 TX+ Fast Ethernet Adapter (8139too)
02:0a.0 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
02:0a.1 Class 0c03: VIA Technologies Inc.|VT82C586B USB (uhci_hcd)
02:0a.2 Class 0c03: VIA Technologies Inc.|VT8235 USB Enhanced Controller (ehci-hcd)
relevant entry in grub's menu.lst:
# (0) Arch Linux-ARCH
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/sda1 ro nosmp noapic acpi=off pci=routeirq ide-legacy
initrd /boot/kernel26.img
I added nosmp and the other parameters at the install/rescue cd's suggestion. I tried using the microcode package (I have a P4 HT) as suggested by someone in another thread.
I've found that the freezes will happen at the beginning of heavy CPU or disk usage (such as compilation or pacman db parsing). The hd is not the original one from this system (it was a hand-me-down), so I don't think that's the problem. The video card is different and the RAM is new. The only components that are still around are:
P4 HT processor (2.60 ghz)
Albatron PX865PE II
Enermax power supply
Any ideas? It also says "bad eip value" when the system has kernel crashes (especially on boot).
Last edited by mrbug (2008-06-21 03:08:35)Latest message while mkinitcpio was running:
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008
BUG: unable to handle kernel paging request at 756e696c
IP: [<c018a137>] flush_old_exec+0x577/0x750
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
Pid: 9173, comm: dirname Tainted: P (2.6.25-ARCH #1)
EIP: 0060:[<c018a137>] EFLAGS: 00210202 CPU: 0
EIP is at flush_old_exec+0x577/0x750
EAX: 756e696c EBX: 00000000 ECX: 00000500 EDX: df269004
ESI: de546c00 EDI: 00000000 EBP: df269080 ESP: de121da4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
Stack: 00000001 de694b00 00000000 df269000 df269004 de710504 de710000 de547134
6e726964 00656d61 c018a39d de121dd4 00000003 de18f878 c035ccb5 de18f840
c01b73be 00000080 00000001 c13d8ec0 dec77000 de694b00 c016421f 00000001
Call Trace:
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
=======================
Code: c3 04 89 e8 e8 eb d6 17 00 89 5c 24 10 bb ff ff ff ff 8b 54 24 10 83 c3 01 89 df c1 e7 05 8b 02 39 38 0f 86 11 01 00 00 8b 40 08 <8b> 34 98 85 f6 74 e0 c7 04 98 00 00 00 00 89 e8 e8 a4 d9 17 00
EIP: [<c018a137>] flush_old_exec+0x577/0x750 SS:ESP 0068:de121da4
---[ end trace 255f477a12072e9b ]---
note: dirname[9173] exited with preempt_count 1
BUG: unable to handle kernel paging request at 6f732e78
IP: [<c012b737>] put_files_struct+0x37/0xb0
*pde = 00000000
Oops: 0000 [#2] PREEMPT SMP
Modules linked in: nvidia(P) agpgart nfnetlink_queue nfnetlink nf_conntrack_ipv4 iptable_filter ip_tables xt_state nf_conntrack xt_NFQUEUE x_tables w83627hf hwmon_vid 8139too mii i2c_i801 i2c_core pcspkr shpchp pci_hotplug sg evdev thermal processor fan button battery ac snd_als4000 gameport snd_sb_common snd_opl3_lib snd_hwdep snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec ac97_bus snd_ak4114 snd_pt2258 snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore e1000 rtc_cmos rtc_core rtc_lib ext3 jbd mbcache usbhid hid ff_memless usb_storage sr_mod cdrom sd_mod ehci_hcd uhci_hcd pata_acpi usbcore ata_piix ata_generic libata scsi_mod dock
Pid: 9173, comm: dirname Tainted: P D (2.6.25-ARCH #1)
EIP: 0060:[<c012b737>] EFLAGS: 00210202 CPU: 0
EIP is at put_files_struct+0x37/0xb0
EAX: 6f732e78 EBX: 00000000 ECX: c1407460 EDX: 00000303
ESI: de546c00 EDI: df399840 EBP: 00200206 ESP: de121bb8
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process dirname (pid: 9173, ti=de120000 task=de546c00 task.ti=de120000)
Stack: df269000 0000000b de546c00 c035c5ec 00200206 c012ce7a c036075c de546e11
000023d5 00000001 00000000 00000001 00200206 c0308c6c c0360510 de121c00
de121d6c 00000000 c035c5ec 00200206 c0106e28 de5d5e34 00000000 1f901000
Call Trace:
[<c012ce7a>] do_exit+0x16a/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c018cc23>] do_lookup+0xf3/0x1b0
[<c0197ff3>] __d_lookup+0x143/0x160
[<c011e6cf>] kunmap_atomic+0x3f/0xe0
[<c015e059>] file_read_actor+0xd9/0xf0
[<c0160e3b>] generic_file_aio_read+0x59b/0x630
[<c019cd83>] mntput_no_expire+0x13/0x70
[<c017ebf9>] add_partial+0x19/0x70
[<c0171309>] remove_vma+0x39/0x50
[<c017fd43>] __slab_free+0xd3/0x360
[<c017ebf9>] add_partial+0x19/0x70
[<c0189d8d>] flush_old_exec+0x1cd/0x750
[<c017fd43>] __slab_free+0xd3/0x360
[<c0171309>] remove_vma+0x39/0x50
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c018007b>] alloc_loc_track+0xab/0xc0
[<c018a137>] flush_old_exec+0x577/0x750
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
=======================
Code: 08 0f 94 c0 84 c0 0f 84 88 00 00 00 8b 04 24 31 db 8b 78 04 eb 09 8d b6 00 00 00 00 83 c3 01 89 d8 c1 e0 05 39 07 76 3c 8b 47 0c <8b> 34 98 85 f6 74 ea 89 dd c1 e5 07 f7 c6 01 00 00 00 74 17 89
EIP: [<c012b737>] put_files_struct+0x37/0xb0 SS:ESP 0068:de121bb8
---[ end trace 255f477a12072e9b ]---
Fixing recursive fault but reboot is needed!
BUG: scheduling while atomic: dirname/9173/0x00000002
Pid: 9173, comm: dirname Tainted: P D 2.6.25-ARCH #1
[<c030542d>] schedule+0x3ed/0x850
[<c0129763>] release_console_sem+0x1b3/0x1d0
[<c012d373>] do_exit+0x663/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c01291d7>] __call_console_drivers+0x57/0x70
[<c01fad04>] number+0x2b4/0x2c0
[<c01fb76f>] vsnprintf+0x43f/0x790
[<c024ec7f>] vt_console_print+0x23f/0x330
[<c016fe66>] free_pgd_range+0x166/0x1e0
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c017007b>] sys_mincore+0xeb/0x3e0
[<c012b737>] put_files_struct+0x37/0xb0
[<c012ce7a>] do_exit+0x16a/0x6a0
[<c0106e28>] die+0x1b8/0x1c0
[<c011cfd1>] do_page_fault+0x1b1/0x790
[<c018cc23>] do_lookup+0xf3/0x1b0
[<c0197ff3>] __d_lookup+0x143/0x160
[<c011e6cf>] kunmap_atomic+0x3f/0xe0
[<c015e059>] file_read_actor+0xd9/0xf0
[<c0160e3b>] generic_file_aio_read+0x59b/0x630
[<c019cd83>] mntput_no_expire+0x13/0x70
[<c017ebf9>] add_partial+0x19/0x70
[<c0171309>] remove_vma+0x39/0x50
[<c017fd43>] __slab_free+0xd3/0x360
[<c017ebf9>] add_partial+0x19/0x70
[<c0189d8d>] flush_old_exec+0x1cd/0x750
[<c017fd43>] __slab_free+0xd3/0x360
[<c0171309>] remove_vma+0x39/0x50
[<c011ce20>] do_page_fault+0x0/0x790
[<c0307d52>] error_code+0x72/0x78
[<c018007b>] alloc_loc_track+0xab/0xc0
[<c018a137>] flush_old_exec+0x577/0x750
[<c018a39d>] kernel_read+0x3d/0x60
[<c01b73be>] load_elf_binary+0x36e/0x1aa0
[<c016421f>] get_page_from_freelist+0x2cf/0x4d0
[<c01646ce>] __alloc_pages+0x5e/0x360
[<c0175705>] anon_vma_prepare+0x85/0xe0
[<c016eabd>] handle_mm_fault+0x60d/0x850
[<c016eacb>] handle_mm_fault+0x61b/0x850
[<c0184b45>] do_sync_read+0xd5/0x120
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016c60d>] vm_normal_page+0x1d/0x70
[<c016d479>] follow_page+0x119/0x1c0
[<c016edd1>] get_user_pages+0xd1/0x2f0
[<c01b7050>] load_elf_binary+0x0/0x1aa0
[<c01898ec>] search_binary_handler+0x15c/0x290
[<c018ab9c>] do_execve+0x21c/0x250
[<c01033c6>] sys_execve+0x46/0x80
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
[<c0300000>] cpu_init+0x220/0x29a
======================= -
[SOLVED] Arch Linux Boot from USB fails while loading kernel
I am attempting to get arch linux booting off my usb. I use cfdisk to create a /dev/sdb1 partition then use mkfs.ext4 /dev/sdb1, mount the usb, pacstrap it, use install-syslinux_update -iam, generate fstab and then attempt to boot from it.
The boot extracts the kernel but then complains that DEVICE is missing in the option APPEND root=DEVICE (in syslinux.cfg). I looked in /dev/disk (on the temporary filesystem shell), it showed my ssd and cd drive but not the usb. Does anyone know what could be causing the USB to not load in that particular section of the kernel?
Last edited by afree10 (2013-12-11 14:28:14)afree10 wrote:
Due to my situation I have to type the file in from scratch so I will only type uncommented lines:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
I will reboot and get that lsmod output.
Since you'll probably want to boot from different computers (portable USB system), you want to remove 'autodetect' from that line. This is the same as always booting the initramfs-linux-fallback.img image. To save some space, you could remove 'autodetect' from the configuration file, disable the fallback image in /etc/mkinitcpio.d/linux.preset and delete initramfs-linux.img (otherwise, you'll get two identical images).
Of course, run mkinitcpio -P when you're done. -
Glibc package fails to compile on linux-ck and linux-pf kernels
I'm trying to compile glibc in debug mode, so I added two lines right after build()
build() {
export CFLAGS="$CFLAGS -g -O1"
export CXXFLAGS="$CXXFLAGS -g -O1"
(stock compilation doesn't work either)
then after some time getting this
GCONV_PATH=/tmp/glibc/src/glibc-build/iconvdata LC_ALL=C /tmp/glibc/src/glibc-build/elf/ld-linux-x86-64.so.2 --library-path /tmp/glibc/src/glibc-build:/tmp/glibc/src/glibc-build/math:/tmp/glibc/src/glibc-build/elf:/tmp/glibc/src/glibc-build/dlfcn:/tmp/glibc/src/glibc-build/nss:/tmp/glibc/src/glibc-build/nis:/tmp/glibc/src/glibc-build/rt:/tmp/glibc/src/glibc-build/resolv:/tmp/glibc/src/glibc-build/crypt:/tmp/glibc/src/glibc-build/nptl /tmp/glibc/src/glibc-build/rt/tst-cpuclock2 > /tmp/glibc/src/glibc-build/rt/tst-cpuclock2.out
Timed out: killed the child process
make[2]: *** [/tmp/glibc/src/glibc-build/rt/tst-cpuclock1.out] Błąd 1
make[2]: *** Oczekiwanie na niezakończone zadania....
Timed out: killed the child process
make[2]: *** [/tmp/glibc/src/glibc-build/rt/tst-cpuclock2.out] Błąd 1
rm /tmp/glibc/src/glibc-build/rt/librt.dynsym
make[2]: Opuszczenie katalogu `/tmp/glibc/src/glibc-2.16.0/rt'
make[1]: *** [rt/tests] Błąd 2
make[1]: Opuszczenie katalogu `/tmp/glibc/src/glibc-2.16.0'
make: *** [check] Błąd 2
no errors except Timed out: killed the child process. I've never ever had such strange issue.
I need glibc with symbols to post detailed information about bug I've founded ... such an ironic problem ... ;]
Here is part of my makepkg.conf
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=core2 -msse4.1 -O3 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 " #-std=c11" # -flto -fwhole-program"
CXXFLAGS="-march=core2 -msse4.1 -O3 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 " #-std=c++11" # -flto -fwhole-program"
#CFLAGS="-pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
#CXXFLAGS="-pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro" #-flto=2 " #-fwhole-program " #-fuse-linker-plugin "
#LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j2"
Last edited by travnick (2013-01-30 00:00:58)lano1106 wrote:
unit test is fine with Arch default kernel.
the function glibc clock_nanosleep() fails only with linux-ck.
Will report the problem to ck and try to fix it if I can.
Thanks for following up on this. For those who haven't seen it yet, here is an excerpt from CK's blog regarding this:
Con Kolivas wrote:Unfortunately it took me quite a while to find since I had to dig deep into figuring out how the whole system of timers works on a low level in the kernel before finally stumbling across one tiny piece of accounting/reporting that was missing on BFS. It's funny that a bug that directly affected almost no one should be so hard to track down. In the meantime it allowed me to tweak a number of bits of internal accounting so hopefully that should have improved as well.
Plz mark your thread as solved if it is so.
Last edited by graysky (2013-01-29 19:57:59) -
[SOLVED] Custom kernel, init fails.
I've been trying to get xen (community/xen package) working for quite some time now and I'm quite stuck. Raid support is built in to the dom0 kernel but it was missing support for my sata chipset (sata_nv) so it didn't see my drives. I downloaded the xenified kernel sources from xen.org and recompiled the kernel with the dom0 config in /boot/. Now it sees the drives but init crashes with.
(had to type this so I skipped quite a lot of the dump and there might be typos)
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
[<ffffffff805a0f08>] netlink_insert+0x58/0x110
Call Trace:
[<ffffffff805a12a5>] netlink_bind+0xc5/0x220
[<ffffffff80585c59>] sys_bin+0x69/0xa0
[<ffffffff805860bc>] sys_setsockopt+0x6c/0xc0
[<ffffffff8020a8d8>] system_call+0x69/0x6d
[<ffffffff8020a870>] system_call+0x0/0x6d
This doesn't happen with the kernel provided in the package and the only thing that has been changed from the provided configuration is the sata driver. I'm really lost with this, if somebody knows how to build a working xen dom0 kernel I could use some insight. If you need more info just ask thou I don't have much to give since I don't have any kind of logs.
EDIT: Actually it might happen even with the provided kernel, I'm not sure if it gets that far before failing because it can't find my hds.
EDIT2: Changed the topic to a little more descriptive one since my questions doesn't really have anything to do with raid 5 .
EDIT3: Changed topic as below it doesn't seem to have anything to do with xen.
Last edited by virus2547 (2008-05-10 01:20:28)Ok I finally managed to boot in to XEN. I modified the PKGBUILD for the xen package to generate the generic XEN kernel (no different kernels for dom0 and domU). Here's the PKGBUILD I used.
pkgname=xen
pkgver=3.1.2
_kernelver=2.6.18
pkgrel=2
pkgdesc="a Virtual Machine Monitor (VMM)"
arch=(i686 x86_64)
url="http://xen.xensource.com"
license=("GPL")
depends=('iproute' 'bridge-utils' 'python' 'sdl' 'zlib' 'e2fsprogs' 'mercurial' 'patch')
source=(http://archlinux-stuff.googlecode.com/files/xen-$pkgver.tar.bz2 \
http://www.kernel.org/pub/linux/kernel/ … r.tar.bz2)
md5sums=('04d3d8d1d57868282a21698559410cc4'
'296a6d150d260144639c3664d127d174')
build() {
cd $startdir/src/xen-3.1-testing.hg
mv ../linux-$_kernelver.tar.bz2 .
make KERNELS="linux-2.6-xen" world || return 1
make KERNELS="linux-2.6-xen" DESTDIR=$startdir/pkg install || return 1
( cd $startdir/pkg/etc && mv init.d rc.d ) || return 1
rm -f $startdir/pkg/usr/share/man/man1/qemu-img.1* \
$startdir/pkg/usr/share/man/man1/qemu.1* \
$startdir/pkg/lib/modules/$_kernelver-xen/build \
$startdir/pkg/lib/modules/$_kernelver-xen/source
I also did mkinitcpio -k 2.6.18 -g /boot/kernel26xen.img, don't know if that's needed but I'm not going to test it now . -
[SOLVED]Linux 3.10.6 fails to detect network interfaces, input devices
I upgraded my ASUS laptop to Linux 3.10.6 and I can no longer use my mouse or keyboard in a desktop environment. A USB mouse faired no better. The keyboard works in console mode. I've done a couple reboots and a good deal of searching online, but no one seems to have the same problem. My first inclination was that udev was no longer running, but a quick "ps -aux | grep udev" revealed that systemd-udevd was running, but not udev itself. Is it safe to start it manually? My network interfaces have also disappeared, BTW, and the font size in console mode has also changed (size has increased, font is fuzzier). Any ideas?
EDIT: I do have the loopback interface.
lsmod shows:
ext4
crc16
mbcache
jbd2
hid_multitouch
hid_generic
usbhid
hid
sd_mod
ahci
libahci
libata
ehci_pci
scsi_mod
ehic_hcd
xhci_hcd
usbcore
usb_common
Last edited by ormris (2013-08-20 16:32:23)Does your running kernel match what pacman has installed? Do uname -r and compare that against the version of pacman -Q linux. If they are different, reboot.
-
Xen Kernel randomly fails to load and goes out of range
Been having an on/off issue lately that requires a hard reset of my system. Essentially what happens is the system begins to load when my monitor reports an error that the signal is out of range. I try to pretend login and reboot, but it does not work. Instead, I am forced to simply reset the system and once reset it appears to boot OK without any issues. In fact I can go a few reboots before once again it decides to break. Below is what should be one of the logs from a failed boot, in fact, the system is in this same failed state right now as well.
arch_1 ~ :( # journalctl -b -1
-- Logs begin at Sat 2013-12-28 00:39:50 EST, end at Thu 2014-01-02 23:28:03 EST. --
Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 332.0K (max 91.3M, leaving 137.0M of fre
Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 336.0K (max 91.3M, leaving 137.0M of fre
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuset
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpu
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuacct
Jan 02 23:22:36 arch_1 kernel: Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SM
Jan 02 23:22:36 arch_1 kernel: Command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console=tty0
Jan 02 23:22:36 arch_1 kernel: Freeing 9e-100 pfn range: 98 pages freed
Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on 9e->100
Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on bd9ff->100000
Jan 02 23:22:36 arch_1 kernel: Released 98 pages of unused memory
Jan 02 23:22:36 arch_1 kernel: Set 271971 page(s) to 1-1 mapping
Jan 02 23:22:36 arch_1 kernel: Populating 80000-80062 pfn range: 98 pages added
Jan 02 23:22:36 arch_1 kernel: e820: BIOS-provided physical RAM map:
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000100000-0x00000000bd9fefff] usable
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bd9ffc00-0x00000000bda53bff] ACPI NVS
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda53c00-0x00000000bda55bff] ACPI data
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda55c00-0x00000000bfffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000100000000-0x0000000237ffffff] usable
Jan 02 23:22:36 arch_1 kernel: NX (Execute Disable) protection: active
Jan 02 23:22:36 arch_1 kernel: SMBIOS 2.5 present.
Jan 02 23:22:36 arch_1 kernel: DMI: Dell Inc. OptiPlex 960 /0Y958C, BIOS A10 12/20/2010
Jan 02 23:22:36 arch_1 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jan 02 23:22:36 arch_1 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jan 02 23:22:36 arch_1 kernel: No AGP bridge found
Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0xbd9ff max_arch_pfn = 0x400000000
Jan 02 23:22:36 arch_1 kernel: Scanning 1 areas for low memory corruption
Jan 02 23:22:36 arch_1 kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x00000000-0x000fffff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x7fe00000-0x7fffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b47000, 0x01b47fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b48000, 0x01b48fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x7c000000-0x7fdfffff] page 4k
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b49000, 0x01b49fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4a000, 0x01b4afff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4b000, 0x01b4bfff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4c000, 0x01b4cfff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x00100000-0x7bffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x80000000-0xbd9fefff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x80000000-0xbd9fefff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x100000000-0x237ffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: RAMDISK: [mem 0x01f54000-0x029fefff]
Jan 02 23:22:36 arch_1 kernel: ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
Jan 02 23:22:36 arch_1 kernel: ACPI: XSDT 00000000000fc7d7 00084 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: FACP 00000000000fc907 000F4 (v03 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: DSDT 00000000ffe9e423 05744 (v01 DELL dt_ex 00001000 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: FACS 00000000bd9ffc00 00040
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000ffea3d30 00087 (v01 DELL st_ex 00001000 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: APIC 00000000000fc9fb 00092 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: BOOT 00000000000fca8d 00028 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: ASF! 00000000000fcab5 00096 (v32 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: MCFG 00000000000fcb4b 0003C (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: HPET 00000000000fcb87 00038 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: TCPA 00000000000fcde3 00032 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: DMAR 00000000000fce15 00108 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bd9ffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00452 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
Jan 02 23:22:36 arch_1 kernel: NUMA turned off
Jan 02 23:22:36 arch_1 kernel: Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
Jan 02 23:22:36 arch_1 kernel: Initmem setup node 0 [mem 0x00000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: NODE_DATA [mem 0x7f0c7000-0x7f0cbfff]
Jan 02 23:22:36 arch_1 kernel: Zone ranges:
Jan 02 23:22:36 arch_1 kernel: DMA [mem 0x00001000-0x00ffffff]
Jan 02 23:22:36 arch_1 kernel: DMA32 [mem 0x01000000-0xffffffff]
Jan 02 23:22:36 arch_1 kernel: Normal [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: Movable zone start for each node
Jan 02 23:22:36 arch_1 kernel: Early memory node ranges
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00001000-0x0009dfff]
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00100000-0xbd9fefff]
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: On node 0 totalpages: 2054556
Jan 02 23:22:36 arch_1 kernel: DMA zone: 64 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: DMA zone: 21 pages reserved
Jan 02 23:22:36 arch_1 kernel: DMA zone: 3997 pages, LIFO batch:0
Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 12072 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 772607 pages, LIFO batch:31
Jan 02 23:22:36 arch_1 kernel: Normal zone: 19968 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: Normal zone: 1277952 pages, LIFO batch:31
Jan 02 23:22:36 arch_1 kernel: ACPI: PM-Timer IO Port: 0x808
Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
Jan 02 23:22:36 arch_1 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Jan 02 23:22:36 arch_1 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ0 used by override.
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ2 used by override.
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ9 used by override.
Jan 02 23:22:36 arch_1 kernel: Using ACPI (MADT) for SMP configuration information
Jan 02 23:22:36 arch_1 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Jan 02 23:22:36 arch_1 kernel: smpboot: Allowing 8 CPUs, 6 hotplug CPUs
Jan 02 23:22:36 arch_1 kernel: nr_irqs_gsi: 40
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbd9ff000-0xbd9fffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda00000-0xbda52fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda53000-0xbda53fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda54000-0xbda54fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda55000-0xbda55fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda56000-0xbfffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
Jan 02 23:22:36 arch_1 kernel: e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Jan 02 23:22:36 arch_1 kernel: Booting paravirtualized kernel on Xen
Jan 02 23:22:36 arch_1 kernel: Xen version: 4.3.1 (preserve-AD)
Jan 02 23:22:36 arch_1 kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
Jan 02 23:22:36 arch_1 kernel: PERCPU: Embedded 29 pages/cpu @ffff88007ee00000 s86464 r8192 d24128 u262144
Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Jan 02 23:22:36 arch_1 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022431
Jan 02 23:22:36 arch_1 kernel: Policy zone: Normal
Jan 02 23:22:36 arch_1 kernel: Kernel command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console
Jan 02 23:22:36 arch_1 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan 02 23:22:36 arch_1 kernel: xsave: enabled xstate_bv 0x3, cntxt size 0x240
Jan 02 23:22:36 arch_1 kernel: software IO TLB [mem 0x72a00000-0x76a00000] (64MB) mapped at [ffff880072a00000-
Jan 02 23:22:36 arch_1 kernel: Memory: 1857868K/8218224K available (5124K kernel code, 807K rwdata, 1628K roda
Jan 02 23:22:36 arch_1 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jan 02 23:22:36 arch_1 kernel: Preemptible hierarchical RCU implementation.
Jan 02 23:22:36 arch_1 kernel: RCU dyntick-idle grace-period acceleration is enabled.
Jan 02 23:22:36 arch_1 kernel: Dump stacks of tasks blocking RCU-preempt GP.
Jan 02 23:22:36 arch_1 kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
Jan 02 23:22:36 arch_1 kernel: NR_IRQS:8448 nr_irqs:512 16
Jan 02 23:22:36 arch_1 kernel: xen: sci override: global_irq=9 trigger=0 polarity=0
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 9 triggering 0 polarity 0
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=9 -> irq=9 (gsi=9)
Jan 02 23:22:36 arch_1 kernel: xen: acpi sci 9
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=1 -> irq=1 (gsi=1)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=2 -> irq=2 (gsi=2)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=3 -> irq=3 (gsi=3)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=4 -> irq=4 (gsi=4)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=5 -> irq=5 (gsi=5)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=6 -> irq=6 (gsi=6)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=7 -> irq=7 (gsi=7)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=8 -> irq=8 (gsi=8)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=10 -> irq=10 (gsi=10)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=11 -> irq=11 (gsi=11)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=12 -> irq=12 (gsi=12)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=13 -> irq=13 (gsi=13)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=14 -> irq=14 (gsi=14)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=15 -> irq=15 (gsi=15)
Jan 02 23:22:36 arch_1 kernel: Console: colour VGA+ 80x25
Jan 02 23:22:36 arch_1 kernel: console [tty0] enabled
Jan 02 23:22:36 arch_1 kernel: allocated 33030144 bytes of page_cgroup
Jan 02 23:22:36 arch_1 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 02 23:22:36 arch_1 kernel: Xen: using vcpuop timer interface
Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 0
Jan 02 23:22:36 arch_1 kernel: tsc: Detected 2992.224 MHz processor
Jan 02 23:22:36 arch_1 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5986
Jan 02 23:22:36 arch_1 kernel: pid_max: default: 32768 minimum: 301
Jan 02 23:22:36 arch_1 kernel: Security Framework initialized
Jan 02 23:22:36 arch_1 kernel: AppArmor: AppArmor disabled by boot time parameter
Jan 02 23:22:36 arch_1 kernel: Yama: becoming mindful.
Jan 02 23:22:36 arch_1 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Jan 02 23:22:36 arch_1 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 02 23:22:36 arch_1 kernel: Mount-cache hash table entries: 256
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys memory
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys devices
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys freezer
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys net_cls
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys blkio
Jan 02 23:22:36 arch_1 kernel: CPU: Physical Processor ID: 0
Jan 02 23:22:36 arch_1 kernel: CPU: Processor Core ID: 0
Jan 02 23:22:36 arch_1 kernel: mce: CPU supports 2 MCE banks
Jan 02 23:22:36 arch_1 kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Jan 02 23:22:36 arch_1 kernel: Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
Jan 02 23:22:36 arch_1 kernel: ACPI: Core revision 20130725
Jan 02 23:22:36 arch_1 kernel: ACPI: All ACPI Tables successfully acquired
Jan 02 23:22:36 arch_1 kernel: ftrace: allocating 20318 entries in 80 pages
Jan 02 23:22:36 arch_1 kernel: Performance Events: unsupported p6 CPU model 23 no PMU driver, software events
Jan 02 23:22:36 arch_1 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 1
Jan 02 23:22:36 arch_1 kernel: Brought up 2 CPUs
Jan 02 23:22:36 arch_1 kernel: devtmpfs: initialized
Jan 02 23:22:36 arch_1 kernel: PM: Registering ACPI NVS region [mem 0xbd9ffc00-0xbda53bff] (344064 bytes)
Jan 02 23:22:36 arch_1 kernel: xen:grant_table: Grant tables using version 2 layout
Jan 02 23:22:36 arch_1 kernel: Grant table initialized
Jan 02 23:22:36 arch_1 kernel: RTC time: 4:22:33, date: 01/03/14
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 16
Jan 02 23:22:36 arch_1 kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PCI registered
Jan 02 23:22:36 arch_1 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Jan 02 23:22:36 arch_1 kernel: PCI: Using configuration type 1 for base access
Jan 02 23:22:36 arch_1 kernel: dmi type 0xB1 record - unknown flag
Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-0> at 0
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Module Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: EC: Look up EC in DSDT
Jan 02 23:22:36 arch_1 kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Jan 02 23:22:36 arch_1 kernel: ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0
Jan 02 23:22:36 arch_1 kernel: ACPI: Interpreter enabled
Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hw
Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hw
Jan 02 23:22:36 arch_1 kernel: ACPI: (supports S0 S1 S4 S5)
Jan 02 23:22:36 arch_1 kernel: ACPI: Using IOAPIC for interrupt routing
Jan 02 23:22:36 arch_1 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and rep
Jan 02 23:22:36 arch_1 kernel: ACPI: ACPI Dock Station Driver: 1 docks/bays found
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only par
Jan 02 23:22:36 arch_1 kernel: PCI host bridge to bus 0000:00
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
Jan 02 23:22:36 arch_1 kernel: DMAR: Forcing write-buffer flush capability
Jan 02 23:22:36 arch_1 kernel: DMAR: Disabling IOMMU for graphics on this chipset
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x14: [mem 0xf7adc000-0xf7adcfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x14: [mem 0xf7add000-0xf7addfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf7ade000-0xf7ade3ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: PME# supported from D3hot
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7adf000-0xf7adf0ff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0940-0x095f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: [8086:105e] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf7880000-0xf789ffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x14: [mem 0xf78a0000-0xf78bffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x18: [io 0xdcc0-0xdcdf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x30: [mem 0xf7900000-0xf791ffff pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: [8086:105e] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x10: [mem 0xf78c0000-0xf78dffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x14: [mem 0xf78e0000-0xf78fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x18: [io 0xdce0-0xdcff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: [1102:0007] type 00 class 0x040100
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: reg 0x10: [io 0xcce0-0xccff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: supports D1 D2
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfec00000] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xbdb00000-0xf7ffffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff970000-0xff9707ff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: Enabled 2 GPEs in block 00 to 3F
Jan 02 23:22:36 arch_1 kernel: ACPI: \_SB_.PCI0: notify handler is installed
Jan 02 23:22:36 arch_1 kernel: Found 1 acpi root devices
Jan 02 23:22:36 arch_1 kernel: xen:balloon: Initialising balloon driver
Jan 02 23:22:36 arch_1 kernel: xen_balloon: Initialising balloon driver
Jan 02 23:22:36 arch_1 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Jan 02 23:22:36 arch_1 kernel: vgaarb: loaded
Jan 02 23:22:36 arch_1 kernel: vgaarb: bridge control possible 0000:00:02.0
Jan 02 23:22:36 arch_1 kernel: PCI: Using ACPI for IRQ routing
Jan 02 23:22:36 arch_1 kernel: PCI: pci_cache_line_size set to 64 bytes
Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0xbd9ff000-0xbfffffff]
Jan 02 23:22:36 arch_1 kernel: NetLabel: Initializing
Jan 02 23:22:36 arch_1 kernel: NetLabel: domain hash size = 128
Jan 02 23:22:36 arch_1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jan 02 23:22:36 arch_1 kernel: NetLabel: unlabeled traffic allowed by default
Jan 02 23:22:36 arch_1 kernel: Switched to clocksource xen
Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI init
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP registered
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0800-0x085f] could not be reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0c00-0x0c7f] has been reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0860-0x08ff] has been reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:01: [dma 4]
Jan 02 23:22:36 arch_1 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 13 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 8 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 6 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:05: [dma 2]
Jan 02 23:22:36 arch_1 kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI: found 7 devices
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP unregistered
Jan 02 23:22:36 arch_1 kernel: PM-Timer failed consistency check (0xffffff) - aborting.
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 10 [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 1 [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 1 [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 10 [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 2
Jan 02 23:22:36 arch_1 kernel: TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 02 23:22:36 arch_1 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 02 23:22:36 arch_1 kernel: TCP: Hash tables configured (established 65536 bind 65536)
Jan 02 23:22:36 arch_1 kernel: TCP: reno registered
Jan 02 23:22:36 arch_1 kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
Jan 02 23:22:36 arch_1 kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 1
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: Boot video device
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=16 -> irq=16 (gsi=16)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=17 -> irq=17 (gsi=17)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=22 -> irq=22 (gsi=22)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=23 -> irq=23 (gsi=23)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=18 -> irq=18 (gsi=18)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: PCI: CLS 64 bytes, default 64
Jan 02 23:22:36 arch_1 kernel: Unpacking initramfs...
Jan 02 23:22:36 arch_1 kernel: Freeing initrd memory: 10924K (ffff880001f54000 - ffff8800029ff000)
Jan 02 23:22:36 arch_1 kernel: Simple Boot Flag at 0x7a set to 0x1
Jan 02 23:22:36 arch_1 kernel: Scanning for low memory corruption every 60 seconds
Jan 02 23:22:36 arch_1 kernel: audit: initializing netlink socket (disabled)
Jan 02 23:22:36 arch_1 kernel: type=2000 audit(1388722954.276:1): initialized
Jan 02 23:22:36 arch_1 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 02 23:22:36 arch_1 kernel: zbud: loaded
Jan 02 23:22:36 arch_1 kernel: VFS: Disk quotas dquot_6.5.2
Jan 02 23:22:36 arch_1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 02 23:22:36 arch_1 kernel: msgmni has been set to 3650
Jan 02 23:22:36 arch_1 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 02 23:22:36 arch_1 kernel: io scheduler noop registered
Jan 02 23:22:36 arch_1 kernel: io scheduler deadline registered
Jan 02 23:22:36 arch_1 kernel: io scheduler cfq registered (default)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 02 23:22:36 arch_1 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 02 23:22:36 arch_1 kernel: intel_idle: does not run on family 6 model 23
Jan 02 23:22:36 arch_1 kernel: GHES: HEST is not enabled!
Jan 02 23:22:36 arch_1 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: 0000:00:03.3: ttyS0 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A
Jan 02 23:22:36 arch_1 kernel: hpet_acpi_add: no address or irqs in _CRS
Jan 02 23:22:36 arch_1 kernel: Linux agpgart interface v0.103
Jan 02 23:22:36 arch_1 kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Jan 02 23:22:36 arch_1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 02 23:22:36 arch_1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 02 23:22:36 arch_1 kernel: mousedev: PS/2 mouse device common for all mice
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: RTC can wake from S4
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
Jan 02 23:22:36 arch_1 kernel: drop_monitor: Initializing network drop monitor service
Jan 02 23:22:36 arch_1 kernel: TCP: cubic registered
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 10
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 17
Jan 02 23:22:36 arch_1 kernel: Key type dns_resolver registered
Jan 02 23:22:36 arch_1 kernel: registered taskstats version 1
Jan 02 23:22:36 arch_1 kernel: Magic number: 14:436:362
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: setting system clock to 2014-01-03 04:22:34 UTC (1388722954)
Jan 02 23:22:36 arch_1 kernel: PM: Hibernation image not present or could not be loaded.
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
Jan 02 23:22:36 arch_1 kernel: Write protecting the kernel read-only data: 8192k
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
Jan 02 23:22:36 arch_1 systemd-udevd[50]: starting version 208
Jan 02 23:22:36 arch_1 kernel: Floppy drive(s): fd0 is 1.44M
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type USB registered
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbfs
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver hub
Jan 02 23:22:36 arch_1 kernel: SCSI subsystem initialized
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new device driver usb
Jan 02 23:22:36 arch_1 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 02 23:22:36 arch_1 kernel: ehci-pci: EHCI PCI platform driver
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: debug port 1
Jan 02 23:22:36 arch_1 kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ade000
Jan 02 23:22:36 arch_1 kernel: FDC 0 is a post-1991 82077
Jan 02 23:22:36 arch_1 kernel: libata version 3.00 loaded.
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: 6 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: version 3.0
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl SATA mode
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: scsi0 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi1 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi2 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi3 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi4 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi5 : ahci
Jan 02 23:22:36 arch_1 kernel: ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 58
Jan 02 23:22:36 arch_1 kernel: ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 58
Jan 02 23:22:36 arch_1 kernel: ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 58
Jan 02 23:22:36 arch_1 kernel: ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 58
Jan 02 23:22:36 arch_1 kernel: ata5: DUMMY
Jan 02 23:22:36 arch_1 kernel: ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 58
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: pata_acpi 0000:00:03.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: debug port 1
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: 6 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: ata_generic 0000:00:03.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: scsi6 : ata_generic
Jan 02 23:22:36 arch_1 kernel: scsi7 : ata_generic
Jan 02 23:22:36 arch_1 kernel: ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
Jan 02 23:22:36 arch_1 kernel: ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
Jan 02 23:22:36 arch_1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata4: SATA link down (SStatus 0 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata6: SATA link down (SStatus 0 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata2.00: ATAPI: PIONEER DVD-RW DVR-217D, 1.07, max UDMA/66
Jan 02 23:22:36 arch_1 kernel: ata3.00: ATA-8: WDC WD15EARX-00ZUDB0, 80.00A80, max UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Jan 02 23:22:36 arch_1 kernel: ata1.00: ATA-6: WDC WD360GD-00FNA0, 34.06J34, max UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata1.00: 72303840 sectors, multi 0: LBA48
Jan 02 23:22:36 arch_1 kernel: ata1.00: applying bridge limits
Jan 02 23:22:36 arch_1 kernel: ata2.00: configured for UDMA/66
Jan 02 23:22:36 arch_1 kernel: ata3.00: configured for UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata1.00: configured for UDMA/100
Jan 02 23:22:36 arch_1 kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FN 34.0 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-217D 1.07 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD15EARX-00Z 80.0 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write Protect is off
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DP
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DP
Jan 02 23:22:36 arch_1 kernel: sda: sda1 sda2
Jan 02 23:22:36 arch_1 kernel: sdb: sdb1
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
Jan 02 23:22:36 arch_1 kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
Jan 02 23:22:36 arch_1 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 02 23:22:36 arch_1 kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 02 23:22:36 arch_1 kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: 3 ports detected
Jan 02 23:22:36 arch_1 kernel: device-mapper: uevent: version 1.0.3
Jan 02 23:22:36 arch_1 kernel: device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-1> at 1
Jan 02 23:22:36 arch_1 kernel: usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
Jan 02 23:22:36 arch_1 kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbhid
Jan 02 23:22:36 arch_1 kernel: usbhid: USB HID core driver
Jan 02 23:22:36 arch_1 kernel: input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.1/u
Jan 02 23:22:36 arch_1 kernel: hid-generic 0003:046D:C713.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitec
Jan 02 23:22:36 arch_1 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Jan 02 23:22:36 arch_1 kernel: usb 3-2.3: new full-speed USB device number 4 using uhci_hcd
Jan 02 23:22:36 arch_1 systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SY
Jan 02 23:22:36 arch_1 systemd[1]: Detected virtualization 'xen'.
Jan 02 23:22:36 arch_1 systemd[1]: Set hostname to <arch_1>.
Jan 02 23:22:36 arch_1 systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit
Jan 02 23:22:36 arch_1 systemd[1]: Expecting device dev-hvc0.device...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Remote File Systems.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Remote File Systems.
Jan 02 23:22:36 arch_1 systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
Jan 02 23:22:36 arch_1 systemd[1]: Starting LVM2 metadata daemon socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on LVM2 metadata daemon socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Delayed Shutdown Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Delayed Shutdown Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Device-mapper event daemon FIFOs.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Device-mapper event daemon FIFOs.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Paths.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Paths.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Journal Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Setup Virtual Console...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Load Kernel Modules...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Service...
Jan 02 23:22:36 arch_1 systemd[1]: Started Journal Service.
Jan 02 23:22:36 arch_1 systemd-journal[129]: Journal started
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Kernel Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Kernel Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Control Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Control Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Coldplug all Devices...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Jan 02 23:22:36 arch_1 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Po
Jan 02 23:22:36 arch_1 systemd[1]: Started Set Up Additional Binary Formats.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Create list of required static device nodes for the current kernel
Jan 02 23:22:36 arch_1 systemd[1]: Mounting Huge Pages File System...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Encrypted Volumes.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Encrypted Volumes.
Jan 02 23:22:36 arch_1 systemd[1]: Mounting Debug File System...
Jan 02 23:22:36 arch_1 systemd[1]: Mounting POSIX Message Queue File System...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Apply Kernel Variables...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Swap.
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Swap.
Jan 02 23:22:37 arch_1 systemd[1]: Started File System Check on Root Device.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Remount Root and Kernel File Systems...
Jan 02 23:22:37 arch_1 systemd[1]: Expecting device dev-disk-by\x2duuid-1f355bf1\x2d1469\x2d4722\x2d8f65\x2d01
Jan 02 23:22:37 arch_1 systemd[1]: Starting Root Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice Root Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting User and Session Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice User and Session Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting System Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice System Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-netctl.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-netctl.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-getty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-getty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-serial\x2dgetty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-serial\x2dgetty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Slices.
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Slices.
Jan 02 23:22:37 arch_1 systemd[1]: Started udev Coldplug all Devices.
Jan 02 23:22:37 arch_1 kernel: FS-Cache: Loaded
Jan 02 23:22:37 arch_1 kernel: RPC: Registered named UNIX socket transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered udp transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'nfs'
Jan 02 23:22:37 arch_1 kernel: FS-Cache: Netfs 'nfs' registered for caching
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_evtchn'
Jan 02 23:22:37 arch_1 kernel: xen:xen_evtchn: Event-channel device installed
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntdev'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntalloc'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_blkback'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_netback'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_pciback'
Jan 02 23:22:37 arch_1 kernel: xen_pciback: backend is vpci
Jan 02 23:22:37 arch_1 kernel: ACPI: Requesting acpi_cpufreq
Jan 02 23:22:37 arch_1 kernel: Monitor-Mwait will be used to enter C-1 state
Jan 02 23:22:37 arch_1 kernel: Warning: Processor Platform Limit not supported.
Jan 02 23:22:37 arch_1 systemd[1]: Started Apply Kernel Variables.
Jan 02 23:22:37 arch_1 systemd[1]: Started Setup Virtual Console.
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Huge Pages File System.
Jan 02 23:22:37 arch_1 kernel: xen_acpi_processor: Uploading Xen processor PM info
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Debug File System.
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_acpi_processor'
Jan 02 23:22:37 arch_1 systemd[1]: Mounted POSIX Message Queue File System.
Jan 02 23:22:37 arch_1 systemd[1]: Started Load Kernel Modules.
Jan 02 23:22:37 arch_1 systemd[1]: Mounting Configuration File System...
Jan 02 23:22:37 arch_1 systemd[1]: Mounted FUSE Control File System.
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Configuration File System.
Jan 02 23:22:37 arch_1 systemd[1]: Started Create list of required static device nodes for the current kernel.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Create static device nodes in /dev...
Jan 02 23:22:37 arch_1 systemd[1]: Started Remount Root and Kernel File Systems.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Load/Save Random Seed...
Jan 02 23:22:37 arch_1 kernel: EXT4-fs (dm-0): re-mounted. Opts: data=ordered
Jan 02 23:22:37 arch_1 systemd[1]: Started Load/Save Random Seed.
Jan 02 23:22:37 arch_1 systemd[1]: Started Create static device nodes in /dev.
Jan 02 23:22:37 arch_1 systemd[1]: Starting udev Kernel Device Manager...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Local File Systems (Pre).
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Local File Systems (Pre).
Jan 02 23:22:37 arch_1 systemd[1]: Mounting /tmp...
Jan 02 23:22:37 arch_1 systemd[1]: MountinI have the same problem on Fedora Core 20 with xen 4.3.1 32bit Sempron3200+ with turned off HPET tables on South bridge and these boot options
xen: noreboot nosmp console_to_ring console=vga vga=text-80x50
linux: pci=noacpi pci=nommconf
Image on Yandex disk
When I solve it I notify you.
Last edited by maskimko (2014-01-16 08:12:35) -
Kernel upgrade issues (missing kernel modules?) [SOLVED]
A couple of days ago I set up a new system.
Worked just fine so far. However, today after a kernel upgrade I got these issues:
-> Running build hook: [fsck]
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/ata_generic.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/ata_piix.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_acpi.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-a4tech.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-apple.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-axff.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-belkin.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-cherry.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-chicony.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-cypress.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-dr.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-elecom.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-emsff.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-ezkey.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-gaff.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-gyration.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-holtekff.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-hyperv.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-kensington.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-keytouch.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-kye.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-lcpower.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-logitech-dj.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-logitech.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-magicmouse.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-microsoft.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-monterey.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-multitouch.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-ntrig.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-ortek.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-petalynx.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-picolcd.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-pl.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-primax.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-prodikeys.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat-common.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat-isku.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat-kone.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-roccat.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-samsung.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-sjoy.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-sony.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-speedlink.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-sunplus.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-tmff.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-topseed.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-twinhan.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-uclogic.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-wacom.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-waltop.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-wiimote.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-zpff.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/hid-zydacron.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/hid/usbhid/usbhid.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/scsi/sd_mod.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/scsi/sr_mod.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/usb/host/ehci-hcd.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/usb/host/uhci-hcd.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/fs/ext4/ext4.ko': No such file or directory
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.3.8-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/ahci.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/ahci_platform.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/ata_generic.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/ata_piix.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_acpi.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_ali.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_amd.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_arasan_cf.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_artop.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_atiixp.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_atp867x.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_cmd640.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_cmd64x.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_cs5520.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_cs5530.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_cs5535.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_cs5536.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_cypress.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_efar.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_hpt366.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_hpt37x.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_hpt3x2n.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_hpt3x3.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_isapnp.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_it8213.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_it821x.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_jmicron.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_legacy.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_marvell.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_mpiix.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_netcell.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_ninja32.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_ns87410.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_ns87415.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_oldpiix.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_opti.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_optidma.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_pcmcia.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_pdc2027x.ko': No such file or directory
cp: cannot stat '/lib/modules/3.3.8-1-ARCH/kernel/drivers/ata/pata_pdc202xx_old.ko': No such file or directory
you get the idea.
Now upon inspection of my system I found that my /lib/modules/3.3.8-1-ARCH/kernel/ looks like this:
lrwxrwxrwx 1 root root 24 Jun 5 09:30 extramodules -> ../extramodules-3.3-ARCH
drwxr-xr-x 12 root root 4096 Jun 5 09:29 kernel
-rw-r--r-- 1 root root 703194 Jun 5 09:29 modules.alias
-rw-r--r-- 1 root root 688762 Jun 5 09:29 modules.alias.bin
-rw-r--r-- 1 root root 2702 Jun 5 09:29 modules.builtin
-rw-r--r-- 1 root root 3579 Jun 5 09:29 modules.builtin.bin
-rw-r--r-- 1 root root 346682 Jun 5 09:29 modules.dep
-rw-r--r-- 1 root root 483093 Jun 5 09:29 modules.dep.bin
-rw-r--r-- 1 root root 353 Jun 5 09:29 modules.devname
-rw-r--r-- 1 root root 116651 Jun 5 09:29 modules.order
-rw-r--r-- 1 root root 131 Jun 5 09:29 modules.softdep
-rw-r--r-- 1 root root 280312 Jun 5 09:29 modules.symbols
-rw-r--r-- 1 root root 355147 Jun 5 09:29 modules.symbols.bin
so it makes sense that the directory and files are not found. The question is where is the problem?
Was my Arch web install bad or is there a problem with today's kernel upgrade?
R.
Last edited by ralvez (2012-06-11 23:58:56)ralvez wrote:
Terminator & Gcool,
Thank you both for your help.
I ended up following the link Terminator posted in his reply and I was able to solve the problem.
Unlike pineapple-biku (in the aforementioned thread) I did not chroot my machine I just:
pacman -S udev
pacman -S mkinitcpio
mkinitcpio -p linux
pacman -S linux
and that solved the problem.
It's odd, however, the number of people having similar problems upgrading the kernel ... seems like there is a bug somewhere that seems to
affect people that "meet certain criteria".
Thanks gain guys!!
R.
Note that all the missing modules are '.ko', rather than the gzipped '.ko.gz' that you should expect with the arch kernel. This indicates that depmod failed when you installed the kernel.
Maybe you are looking for
-
How to display data horizontally
Hi, I have to display data the following format. sales order item description 01/09/2010 02/09/2010 03/09/2010 100 1 test 3 4 6 in currently i am displaying the following format. sales o
-
Webutil and db_to_client and transfering a clob
Is there any reason why webutil does not like clobs.. I keep getting ora-00932 when trying to use these functions to get a clob from the db to the client pc. It works fine for blobs. Why did Oracle implement this only for blobs and forget clobs? Is t
-
Application Object - ApplicationData
Hello All: I am trying to set retreive an Application-wide variable from the Application object from within a P.E.I. using the ApplicationData object. I see the GetApplication() that returns a com.plumtree.uiinfrastructure.web.IApplication object but
-
Display image thumbnail in open menu
jpgs show, pdfs show but the thumbnail for psd are blank
-
Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?