Liquidity Planner - Liquidity Item Re-assignment

Hello Experts
My question is regarding Liquidity Planner.
We have offsetting items being allocated to Liquidity Item IN-TFR-000(unallocated payments).
For example clearing document 10018475 line item 1 reports +4375.00 for Liquidity item IN-TFR-000. The same clearing document 10018475 Line 2 will post -4375.00 for Liquidity item In-TFR-000.
Both items are reported on the FLQ Line Items report.
We need to exclude these items which have the same document number/ with zero totals from the Line items report. Note that liquidity item IN-TFR-000 also has other unallocated items to be reported.
Can I re-assign these items to another liquidity item (e.g OT-OUT-999) via a program or user exit? I can only do this after the liquidity item has been assigned through FLQAB/ FLQAC/FLQAD.
Also where to configure the user exit? Or do I use a program to call the manual assignment transaction FLQAM? 
Thanks in advance!

Hi ,
It is possible to transfer the amount from one liquidity item to another liquidity item by using the transaction code FLQT1 .

Similar Messages

  • (LIQUIDITY PLANNER) Liquidity item determination in FLQAD

    Hello, gurus,
    I have a question regarding determination of liquidity items in the second step of derivation with transaction FLQAD.
    I am setting up a query in the system, which should analyze the accounting document segment of the vendor line in the invoice. I have tried different set up options and used both exit _INV and _REX, but they both use expence account as information line in the second step.
    Is there any possibility I can make the vendor line from the second step as information line? Because this line is the most informative in my document chain, and I need to define fields from this line in the query.
    Thanks in advance!
    Joaniuka

    Hi,
    Yes, I have tried with C type query sequence, but it only examines the vendor document from the first step, that is in the vendor-bank clearing account clearing document. And it does not derive any information I need from that document, because the vendor line in invoice has the fields I need to put on a querry - and invoice is only reached in the second step.
    BR,
    joaniuka

  • Liquidity Planner (liquidity calculation) queries

    I am using some queries (origin C and D) for a company. I need to start to use this query for other companies, but not for all the companies in the system.
    Anybody knows if there is any way to limit the query at 2 or 3 company? I tried to add a new company but the system says me that the query already exits, and if I erase the company in the first screen (FLQQC1 or FLQQD1) it will be valid for all companies.
    Thanks,
    Cecilia.

    I could not do that. I should to use it for one or for all companies.

  • Liquidity Planner (queries)

    Hi,
    I am working in a roll out of liquidity Planner (liquidity calculation). There is already a company in the country which is the one that I have to take as a reference. My question is about queries (TS FLQCC1 and FLQQD1); I can see that the reference company has the queries which I need already created (they are created for the company and not global for the country). I am thinking of changing these queries as global for country (without an specific company) and then assign them to an specific secuency query for the company (TS FLQQC5 and FLQQD5).
    My question is if these changes can generate any problem for the document chains and if the perfomance could be worse?
    In addition I want to ask which is better or more usually: to define queries for a company or  global for a country? 
    Thanks,
    Cecilia

    Hi Cecilia,
    I would like to clarify certain things though i am not an expert in Liquidity Planner.
    By reference company, do you mean that you want the functionality like them or something else? I do not know for the country though, but liquidity forecast for the treasurers should be interestd only for their company. And country , even if it is possible, should be mich more performance intensive.
    Please correct me if i interpreted the question erroneously.
    Best regards!
    Sandip

  • Item not assign in standard liquidity planner

    Hello to you all.
    I am using liquidity planner in the standard way without any developing.
    Once I used Tcode FLQQD7 - Test Query to check my setting of the Assignment from Invoices, the document was assign to the correct item.
    Once I used Tcode FLQAD - From Invoices to actual assign it,  I was surprised that the system couldn't find the document at all.
    I will appreciate your advise.
    Amir

    probably this Document is not present in LP tables(FLQITEM*) as it does not have an actual account Line.
    So FLQAD doesnot capture this Document.
    Let me explain with an example how the assignment program FLQAC and FLQQC7 works,
    Assume Liquidity item for Info be assigned through query as Q1.
    Doc1
    Actual account : 100
    Info account   : 100-
    Now when you run FLQQC7 for this Doc,then you will notice 2 Lines for same Doc with no Liquidity item for the Line item with actual account and Liquidity item Q1 being assigned for the Line item with info  account.FLQQC7 just projects the LI assigned for the account in the Doc.
    Now when you run FLQAC for the same Doc,then the amount 100 will be assigned to the Liquidity item Q1.You will notice only 1 Line. This implies that the amount from actual account is ASSIGNED to the LI Q1.
    Now if have cleared the Info line in Doc1 with another Doc,for eg, Doc2,
    Info account :100
    Info account1:100-
    Then FLQAC will have assigned the  amount 100 to LI for the info account1.
    This implies that the amount from actual account is assigned the info account1.
    And you should use the FLQQC7 to info account1 and check it is the same LI as FLQAC and not for the info account1 in Doc1. This is how FLQQC7 should be used.
    But in your case you have marked the gl accounts as actual and also as Info through query.
    When you run FLQQC7 and FLQAC for the Doc with such accounts, for Eg:
    Actual1 : 100
    Acutal2 : 100-
    This Doc is just a Bank transfer Doc. So when you run FLQAC for such Docs,you will notice the amounts assigned to transfer LI assigned in FLQC2.
    But when you FLQQC7(Note that both the Docs are assigned a LI in query), you will notice that the LI assigned in query is assigned to those accounts in Query.
    To test query assignment is working correctly,I would suggest you to post a Doc as the First example.
    And assign LI through query for the Info account only.Then RUN FLQQC7 for the info account in the Doc.
    Then Run FLQAC for the same Doc.The assignment program should also have assigned the same LI as in FLQQC7.
    If so then query assignment is working fine.
    Also I would suggest you to read the note 412605 on how the Liquidity planner should be used.
    Kind Regards
    davide

  • Error Dummy items from Customizing have to be excluded @ Liquidity Planner

    Dear Experts,
    I want to try Liquidity Planner Calculation, using FLQAD,
    when in selection screen i aready insert :
    - Paying Company Code
    - 1st Derivation Step : Query Sequence
    - 1st Derivation Step : Exit Module
    - 2st Derivation Step : Buffer Item
    - 2st Derivation Step : Exit Module
    - Test Run
    - Detail List
    so when Execute / F8, i get error message "Dummy items from Customizing have to be excluded"
    please help me.
    thx you.

    You get this error if the liquidity items in FLQC2/FLQC13 and buffer item field of flqad selection screen are same.
    Buffer item refers to liquidity items assigned to vendor/customer recon accounts.
    To avoid this error donot use liquidity items from FLQC2/FLQC13 in FLQAD buffer item.

  • Liquidity Planner- Redetermine Liquidity Items

    Hi,
    I have created my bank sub-accounts as Actual Accounts. I had missed creating a few accounts ( bank sub- accounts ) to be assigned as actual accounts. After a few entries had been posted I realised that these accounts had been missed and then created them as actual accounts.
    I have now run Transaction FLQAC and have found that for the documents that were posted before I have maintained the Actual Accounts,the system has not derived the Liquidity items .
    For example an entry has been made from the Main Bank Account to Bank -Sub Account.
    As the Actual account was not maintained for the Sub- Account at the time of initial posting.,the system has now an entry with INIT_TRANS, when I run FLQAC.
    Is there a way I can rectify this and ensure that INIT_TRANS becomes Zero ?
    Thanks and Regards.

    You need to use t.code FLQC10 to pull missed documents to liquidity planner and then run FLQAC/FLQAD.

  • Liquidity Planner - assignment logic!

    Hello,
    unfortunately I have several problems with the liquidity planner in SAP R/3. From my point of view i`ve done the whole customizing (default-settings, N:M, partially ..., assignment to the liquidity positions, settings for the online update, ...). Everything works fine but I am not able to reproduce the logic of the assignment programm. There are a lot of complex FI-documents which have several clearing documents and it`s almost impossible to check if the assignment programs (1st step: FI assignment / 2nd step: bill-assignment) is working in an acceptable way. Sometimes it looks like that the assignment-program allocate the values in a special way (also if there is an 1:1-assignment between the information-lines and the actual-lines (banc account, ...)).
    My questions:
    Which experience do you have made with this kind of functionality?
    How is your approach to make the assignment (which user-exits do you use, is it necessary to use enquiries, ...)?
    Do you know any reports which might be helpful to analyse the assignment logic (I`ve found the program "RFLQ_REXCHAIN2 -> this one is nice for one position but in case of complex documents it`s also not really helpful)?
    Do you have any documentation which is more helpful than the oss-notes?
    I would be really grateful for a feedback. Thx in advance.
    W
    Edited by: Werner Hörhager on Jun 24, 2010 5:49 PM

    Hello,
    unfortunately I have several problems with the liquidity planner in SAP R/3. From my point of view i`ve done the whole customizing (default-settings, N:M, partially ..., assignment to the liquidity positions, settings for the online update, ...). Everything works fine but I am not able to reproduce the logic of the assignment programm. There are a lot of complex FI-documents which have several clearing documents and it`s almost impossible to check if the assignment programs (1st step: FI assignment / 2nd step: bill-assignment) is working in an acceptable way. Sometimes it looks like that the assignment-program allocate the values in a special way (also if there is an 1:1-assignment between the information-lines and the actual-lines (banc account, ...)).
    My questions:
    Which experience do you have made with this kind of functionality?
    How is your approach to make the assignment (which user-exits do you use, is it necessary to use enquiries, ...)?
    Do you know any reports which might be helpful to analyse the assignment logic (I`ve found the program "RFLQ_REXCHAIN2 -> this one is nice for one position but in case of complex documents it`s also not really helpful)?
    Do you have any documentation which is more helpful than the oss-notes?
    I would be really grateful for a feedback. Thx in advance.
    W
    Edited by: Werner Hörhager on Jun 24, 2010 5:49 PM

  • Liquidity Planner and New General Ledger

    Dear all
    We are in the process of implementing Liquidity Planner and would like any informaiton related to this which may be of help, particularly related to intergration with New General Ledger and providing cash flow statements for segments and profit centres.
    Many thanks
    PRG

    Dear Bernd,
    <b>Document Splitting:</b>
    http://help.sap.com/saphelp_glossary/en/35/88d1bbd1952050e10000009b38f982/content.htm
    An automatic procedure for organizing line items in the document according to selected dimensions (such as organizing receivable lines by profit center). Moreover, you can effect a zero balance setting for selected dimensions (such as profit center or segment). The zero balance setting causes additional clearing lines to be generated on clearing accounts in the document after the document has been created.
    For example, the document splitting procedure is necessary for drawing up financial statements for the selected dimensions.
    <b>Document Split Account:</b>
    http://help.sap.com/saphelp_glossary/en/35/26c626afab52b9e10000009b38f974/content.htm
    A special account that must be created in financial accounting for posting payroll results to accounting. The partial totals for all documents in a posting run are posted to this account.
    <b>Document Splitting Characteristics:</b>
    http://help.sap.com/saphelp_glossary/en/10/046cfff732584989de50edd6fdc1e3/content.htm
    Account assignment object for which document splitting can be performed.
    This characteristic generally corresponds to a field in the data structure of the general ledger.
    Examples of document splitting characteristics:
    Profit center
    Segment
    Business area
    Customer field
    Other characteristics (characteristics that are relevant for application components that receive documents from General Ledger Accounting, such as Controlling). 
    Hope this will help.
    Regards,
    Naveen.

  • Liquidity Planner - Forecast Programs

    Hi,
    We are implementing the Liquidity Planner SAP module, and we need to use some forecast programs for loans and others treasury transactions.
    Does anyone have documentation regarding to the following forecast programs?
    RFLQ_CASH_FORECAST_TRC1
    RFLQ_CASH_FORECAST_TRD1
    RFLQ_CASH_FORECAST_TRT1
    We have already implemented them, however we need to create queries type T - From Treasury Deal, in order to derive correctly the liquidity items. Wich is the transaction that we have to use?
    Thanks in advance.
    Regards

    Hi Ana.
    I am facing the same problem. I cannot find a way to maintain a query which is origin T. I tried to run SAPMFLQQRMAINT program, but I am getting an error (FQL037) when I try to fill the "Origin" field with "T".
    Have you found a way to make it work properly?
    Kind Regards,
    Paulo.

  • Regarding Liquidity Planner Customization (Configuration) ?

    Hello ,
        Every one
            Currently i am searchiing basic neccessary Liquidity Planner Customization to be do . My question is could any body tel me the way how should i get the names of all necessary Liquidity Planner Customization ?
            If any body has list of it could you tel me the names ?
    Thank you
    Deepak Pawar

    The best thing you could do is read the configuration guide for [FSCM-CM|http://help.sap.com/bp_bl603/BBLibrary/HTML/160_ES_VE.htm].
    Hope it helps!

  • Liquidity planner customer / vendor / gl account based query

    Hi gurus ;
    My client want to see cash flows  at customer , vendor and gl account base.  Are there any way to classify query results for customer , vendor and gl accounts.
    Thanks ;
    Koray

    Hi,
    As a standard solution, you need to define Planning Group in such a way which will give direct difference to Vendor/Customer records. As a result the CM settings can also be configured seperately for different Planning Groups.
    Liquidity Planner will show the balance in drill down layout with different Planning Group also.
    Regards
    prasad

  • Liquidity planner versus FF7B and CO cost elements

    What is the added value of SAP Liquidity Planner (only looking at actual data; the planning function I understand) when Liquidity Forecast (transaction FF7B) and CO (expense cost elements) have already been implemented?

    Please, take a look on this discussion
    Treasury - FF7B

  • SAP Liquidity Planner

    Hi
    Does anyone have any online documentation for SAP Liquidity Planner?
    Thank you

    Hi,
    Yes, still need to enter the function modules stated in table TRWPR in 604.
    Manish

  • CBM to Liquidity Planner migration

    Hi every body,
    I would like to know if when doing a upgrade from 4.6 to 6.0, it's not possible to work with the table FMEP (line itens for CBM) anymore.
    I already know that CBM was replaced by LP, but i'm not sure about that table (FMEP).
    Very thanks

    Hi Ricardo,
    since there is no Cash Budget Management from ERP 2005, the transaction FMEP can't be used for reporting. The table FMEP keeps old data, but will not be updated/used by Liquidity Planner.
    Anyway, you can still apply enhancement program RFLQ_CB_ACTUALS to use the table FMEP for reporting purposes (see note  958218). However, you will not be able to drilldown.
    For more info on migration from CBM to LP see note 731563.  
    BR, Tomislav

Maybe you are looking for