Listener is not updated

Hello,
I have a problem with listener. It looks like it is not updated by PMON. I have application server with jdbc pool connected to Oracle database. After restarting the application server the number of established connection is always growing till the listener state is going to status blocked. The netstat command shows expected number of connection as well as results from v$session view. For instance
select count(*) from v$session shows 176
but lsnrctl services shows
Service "xxxx.xxx.local" has 1 instance(s).
Instance "xxxx", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:444 refused:0 state:ready
LOCAL SERVER
What can I do to solve this problem?
Thank you very much in advance.
Lukasz.

Looks like the problem with the application server connection pool configuration and the connections established to the database are not exiting properly.
The number of connections to the database keep growing as no session is exiting.
You might be observing more INACTIVE sessions that are still connected to the database. Check your application server configuration and documentation related to application server to end the session once it is completed the transaction.
check below for a count of active and inactive sessions
sql> select status, count(*) from v$session group by status;

Similar Messages

  • Portlet to Portlet Problem : listening portlet not updating

    Having trouble with an Adaptive Portlet. I have a broadcaster that when selecting a link in a data grid will pass and ID to the Listening portlet and display info based on that passed ID. (nothing hard). This code works fine in our development environment but will not refresh the listing portlet in our production environment. I have displayed the form filed in the listing portlet that receives the ID from the broadcasting portlet and it is passing a value. but again the listening portlet will not display any other information. I have also put code into the listing portlet so as not to cache the portlet. Our dev environment is runningPlumtree portal server (5.0.2) and is also the portlet server. Plumtree Content Server. .NET framework 1.1 and 1.0.NET Framework Hotfix(kb824629), jsharp redistributable(ENU) v1.0.4205 jsharp redistributable 1.1Plumtree .NET web Controls (version 3.0.1.0 under support info in control panel/add-remove programs)Plumtree Enterprise web development kitPlumtree studio Our Production Portal server.Plumtree portal server (5.0.2).NET framework 1.1 and 1.0.NET Framework Hotfix(kb824629), jsharp redistributable(ENU) v1.0.4205 Our Production Portlet server.Plumtree portal server (5.0.2) .NET framework 1.1 and 1.0.NET Framework Hotfix(kb824629), jsharp redistributable(ENU) v1.0.4205 jsharp redistributable 1.1Plumtree .NET web Controls (version 3.0.1.0 under support info in control panel/add-remove programs)Plumtree Enterprise web development kitPlumtree portlet suite for exchange 2000 v3.0.2Gagit framework for Excel Any Ideas as to what is missing????

    I figured out the issue. Portlet B only listens for the event if it is visible. The event gets fired when portlet A is maximized, so portlet B is no longer visible.
    thanks

  • Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s

    I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
    So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
    So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
    Any help on this matter will be enormously appreciated
    Thanks in advance

    I have playlists that rely on the Last Skipped and
    Skip Count properties of songs, but these items only
    seem to be triggered if the song is fast forwarded
    between 3-20 seconds into the song. I tried to skip
    I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
    One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks.

  • ORA-12514: TNS:listener does not currently know of service requested

    While connecting "sqlplus SYSADM/SYSADM@HCM" I am getting the below error:
    ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Installation background:
    Windows 7 l(64-bit) laptop.
    Created linux virtualbox to installl peoplesoft VM templates.
    so far installed: Oracle11gR2.vdi and HCMDB.vdi on the linux virtualbox.
    Followed the steps exactly what it is in the link below: Got the above error in page 4 of the link at connecting to database via sqlplus.
    http://bloggingaboutoracleapplications.org/running-oracle-vm-templates-oracle-enterprise-linux-guide-part-1-7/
    Below provided initHCM.ora, tnsnames.ora, listerner.ora and some responses I tried. I could not figure out what causing the issue even after researching in web.
    Your help would be highly appreciated.
    tnsnames.ora:
    =============
    # tnsnames.ora Network Configuration File:
    HCM =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = HCM)
    Listener.ora:
    =============
    # listener.ora Network Configuration File:
    /u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    initHCM.ora:
    ============
    DB_FILES =256
    OPEN_CURSORS = 1000
    db_block_size = 8192
    remote_login_passwordfile = NONE
    undo_tablespace=PSUNDOTS
    NLS_LENGTH_SEMANTICS=CHAR
    # Cache and I/O
    #db_block_size=
    db_file_multiblock_read_count=16
    # Database Identification
    # db_domain=us.oracle.com
    # db_name=
    # Diagnostics and Statistics
    #background_dump_dest=
    #core_dump_dest=
    #user_dump_dest=
    # Job Queues
    job_queue_processes=10
    # Processes and Sessions
    processes=150
    # SGA Memory
    sga_target=287309824
    # Security and Auditing
    #audit_file_dest=
    #remote_login_passwordfile=EXCLUSIVE
    # Shared Server
    dispatchers="(PROTOCOL=TCP) (SERVICE=XDB)"
    # Sort, Hash Joins, Bitmap Indexes
    pga_aggregate_target=95420416
    # System Managed Undo and Rollback Segments
    undo_management=AUTO
    #undo_tablespace=
    unnestsubquery=false
    # Miscellaneous
    compatible=11.2.0.2.0
    control_files=(/u01/app/oracle/oradata/HCM/control01.ctl)
    DB_NAME=HCM
    [oracle@hcmdb91 ~]$ tnsping hcm
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
    07:40:37
    Copyright (c) 1997, 2010, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
    hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
    HCM)))
    OK (20 msec)
    [oracle@hcmdb91 ~]$
    [oracle@hcmdb91 ~]$ tnsping hcm
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
    07:40:37
    Copyright (c) 1997, 2010, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
    hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
    HCM)))
    OK (20 msec)
    [oracle@hcmdb91 ~]$ lsnrctl start
    LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:41:32
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    TNS-01106: Listener using listener name LISTENER has already been started
    [oracle@hcmdb91 ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:20
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
    Start Date 28-MAR-2013 07:29:21
    Uptime 0 days 0 hr. 13 min. 1 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File
    /u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
    Listener Log File
    /u01/app/oracle/product/11.2.0.x/db_1/log/diag/tnslsnr/hcmdb91/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hcmdb91.example.com
    )(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    The listener supports no services
    The command completed successfully
    [oracle@hcmdb91 ~]$ lsnrctl services
    LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:44
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    [oracle@hcmdb91 ~]$
    [oracle@hcmdb91 ~]$ sqlplus SYSADM/SYSADM@HCM
    SQL*Plus: Release 11.2.0.2.0 Production on Thu Mar 28 07:44:25 2013
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in
    connect descriptor
    My guess is that the database service "HCM" is not up and running but not sure how to make up and running. Even I could not find it listed in the linux services list.
    Note: Able to login sqlplus using "sqlplus sys/sys as sysdba" but failing to access database table as "select * from PSRECDEFN;"
    thanks
    Espii.
    Edited by: 995437 on Mar 28, 2013 6:52 AM
    Edited by: 995437 on Mar 28, 2013 6:59 AM

    Hi Nicolas,
    I have no luck and the error still persists.
    I have set the "export ORACLE_SID=HCM" from root user and oracle user too.
    I guess, I have already loaded database when I ran the "cd /opt/oracle/psft/vm
    ./oraclevm-template.sh"
    The outcome of the above script as similar as below:
    Creating
    ovm_configure_pre
    CreateVirtualEnvironment
    /u01/scripts/db-reconfig.sh: line 238: ovm_set_password: command not found
    /u01/scripts/db-reconfig.sh: line 239: ovm_configure_network: command not found
    INFO:
    Starting Oracle database reconfiguration.
    Oracle Database Configuration
    This will configure on-boot properties of Oracle Database.
    The following questions will determine whether the database should be
    starting upon system boot, the ports it will use.
    Press <Enter> to accept the defaults.
    Do you want to relink binaries? (y/n) [n] y
    Specify a port that will be used for the database listener [1521]:
    Do you want Oracle Database to be started on boot (y/n) [y]:y
    Wrote to /etc/sysconfig/oracle11g
    Relinking Oracle Binaries...
    Oracle Relinking Completed Successfully
    Logs: /home/oracle/relink.log
    Running orainstRoot.sh and root.sh...
    set 2GB tmpfs
    Enabling Oracle Database service
    Configuration Completed Successfully.
    Enter the name of the database SID [TESTDB]:HCM
    ORACLE instance started.
    Total System Global Area 288104448 bytes
    Fixed Size 2225832 bytes
    Variable Size 104859992 bytes
    Database Buffers 176160768 bytes
    Redo Buffers 4857856 bytes
    Control file created.
    Database altered.
    Tablespace altered.
    Tablespace altered.
    Tablespace altered.
    1 row updated.
    160 rows updated.
    Commit complete.
    Kumar - I have found no sqlnet.ora file exist in the $ORACLE_HOME/NETWORK/ADMIN
    Edited by: 995437 on Mar 28, 2013 9:15 AM

  • 11gR2 Install Error, Listener is not up or database service is not registered with it

    Hi all,
    I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
    Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
    'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
    Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
    I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
    Here's teh contents of my listener.ora file:
    # listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    ADR_BASE_LISTENER = C:\app\Damien
    Here's the contents of my tsnames.ora:
    # tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    Here is the last fe lines of my emConfig.log:
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
    CONFIG: isLocalConnectionRequired: true
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
    CONFIG: SQLEngine created successfully and connected
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
    at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
    at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
    at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
    at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
    at java.lang.Thread.run(Thread.java:595)
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
    at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
    at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
    at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
    at java.lang.Thread.run(Thread.java:595)
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
    My Listner status output is here:
    LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
    Start Date                18-JAN-2014 09:27:34
    Uptime                    0 days 0 hr. 47 min. 6 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
    Listener Log File         c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
    Many thanks for any assistance that you give. I'm learning so be gentle...
    Damien

    SOLVED!
    OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
    Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
    ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
    What I did to solve the name resolution problem
    1. Opened the
    Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
    Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    the 'unknown' means that the DB  didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
    So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
    Thanks for all your help Baris, and Ed Steven website.
    I know more now than when I started so I'm happy.
    Thanks.

  • Why is my wish list not updating when I add songs through iTunes Radio?

    Wish list is not updating.

    Count me in the same boat.  I'm an iTunes Match customer.  While listening to iTunes Radio I push the star and then choose to add to wish list except it never adds.  Doing the same function on my Mac works fine. 
    I found a note from Apple that stated you can only add "albums" to your wish list on iOS 7, not songs.  That then begs the question....why add functionality that is purposefully intended to add songs in your own UI????

  • Smart playlists not updating live after 3.0 upgrade

    I have a smart playlist: 'songs I've not played in a while'. Before the upgrade, if i had 100 songs in the playlist and played one, the playlist would update and the next time I'd access it I'd have 99 songs in it. however, after upgrading the playlist is not updating itself. It will stay at 100 songs and the only way to make it update itself is to sync with itunes. The placounts etc are all being remembered, but my playlist is no longer updating by itself.
    Help! What can I do to fix this?

    First, downgrading the firmware is not something that Apple will support, so if something does go wrong (not likely, but remotely possible) you could end up with a device that does not work.
    Second, in order to downgrade to an earlier version of firmware, you have to already have it on your computer. If you never did a firmware update prior to installing 3.0, then you don't have a 2.x firmware on your computer to install. While you might be able to find a copy of 2.x, there have been reports of problems with the copies people are finding. But if you ever did a firmware update, say from 2.2 to 2.2.1 then you would have 2.2.1 on your computer already. If that's the case, then follow these instructions:
    1- Connect your Touch to your computer and put it into "DFU mode" (Google that for instructions). Getting into DFU mode is a little tricky to get the timing just right, so pay attention to the instructions and what to look and listen for.
    2- iTunes will tell you that the Touch needs to be restored to factory conditions (this is expected). Instead of clicking the Restore button, hold down the SHIFT key as you click Restore (on a Mac I think it's Option-Restore). You'll see a navigation window for you to locate the firmware. Navigate your way to where the firmware is stored on your computer, which on a PC is:
    C:\Documents and Settings\(account name)\Application Data\Apple Computer\iTunes\iPod Software Updates
    (on a Mac these files are located at: ~/Library/iTunes/iPhone Software Updates)
    Select the proper .ipsw file for your device. For 2.2.1 the file is "iPod2,12.2.1_5H11aRestore.ipsw"
    3- Your Touch will go through the Restore process. When you get to the point where you choose to re-load your last backup or set up the Touch as a new iPod, choose the new iPod selection since the backup contains 3.0-specific information that may not work with earlier firmware.
    4- You'll then have to re-load your Touch's contents, including music, video, web links, settings preferences, etc.

  • Meta data (song information) not updating in mini player for radio stream

    I notice in the mini player view, the meta data does not update for radio streams.  This is a big deal for me because I listen to radio stations all the time, and I don't want to have to switch between the mini player and full player to see the song information.  This wasn't an issue in iTunes 10 (and previous versions as I recall), where I could just click to toggle between the name of the station and the meta information.

    I understand your concerns, but regarding the headphone jack, this is standard procedure. While you may have checked these things, and know more about the player, a lot of people will not check the basic things before contacting support. The Advisors have to check these things with you first to make sure they've been checked.
    As far as transferring data goes, it is true that unfortunately we cannot transfer data over for you or make a back-up. Doing this for all the returns for different players would require a lot of resources, time and money, making the RMA process a lot longer for everyone. In some cases, it's even necessary to replace the harddri've or the whole player.
    Cat

  • Photo Not Updating for Podcast

    I have a minor issue with the Podcast app from iOS 5.1.1 thru 6.1.
    The artwork for the podcasts are not updating in the app.  I listen to a lot of music podcasts and on iTunes I see the updated artwork every week.  When I sync my iPhone 5 I will see it say Updating cover for episode ### but when I play that episode podcast it will have the artwork for an older episode.  Usually for an episode that I have already deleted.
    Not a huge crisis but it is annoying.  Thanks.

    The feed you are checking is at
    http://www.calvarygreenmeadow.com/podcasts/ccgreen-rss.xml
    and though the server is being slow to respond it can be subscribed to in iTunes and shows your recent episodes as expected.
    However, iTunes is looking for a feed at
    http://www.calvarygreenmeadow.com/~calvaryg/podcasts/ccgreen-rss.xml
    There is no file at this address. This means that since 14 November last you have been updating the wrong feed.
    You need to replace the feed at this URL. Once done, you can redirect iTunes to your newer feed if you want, following the process detailed here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

  • After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

    With both my Mac's, reset Photoshop C  (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

    Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
    However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
    If anyone has any other ideas though, then I'm more than willing to listen.
    Thanks again.

  • Smart Album Not Updating Dynamically

    I recently upgraded to iPhoto 11.  My Smart Albums now no longer update dynamically.  For example, I have a smart album that contains the last 3 months of photos.  It does not update after I import photos from my camera.  I have to manaully edit the settings for the smart album and click ok.  I don't change the settings, just edit and click ok.
    Why aren't the smart albums dynamically updating?

    Dynamic update of smart playlists when playing music untethered on an iPod touch 2G set to manually manage music is broken with the latest iPhone 3.0 Software Update for iPod touch. Here we go again on this issue. It seems to be broken or purposefully disabled on every other update for the iPod.
    On a side note, I noticed that my iPod now occasionally displays a wait screen when opening Music. I found this happens when I alter my playlists in iTunes.app, then disconnect the iPod for a session of untethered listening. Perhaps the iPod is actually building the smart playlists then, perhaps not, perhaps a smart developer will take advantage of this to trigger the smart playlist updating.

  • Podcasts episodes not visible and not updated

    Since 2 weeks I have noticed that in iTunes for Windows new postcasts episodes are no longer visible in the Postcast section. The result is that as no updates are shown (also not after using the refresh option) the new episodes are not downloaded either.
    The strange thing is that when I look in the iTunes Store or create a Smart playlist with Grouping set to Podcast the episodes are visible.
    Any suggestions why the episodes are not visible and not updated?
    Thanks.

    Does this fit your situation? iTunes will stop updating a podcast subscription if you have more than five episodes downloaded but not listened to, as detailed in this page:
    http://support.apple.com/kb/TA23353
    which states:
    You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
    iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
    You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update.

  • Trying to add another DB under SCAN via DBCA "Default listener LISTENER is not Configured in the grid infrastructure home"

    Trying to install another DB under RAC using SCAN listener on a new port.  DBCA gives error "Default listener LISTENER is not Configured in the grid infrasturcture home".
    Have tried srvctl config listener, srvctl start listener to start the listener.  Still not able to get past the DBCA error.  What am I missing?  Do not want to start LISTENER on port 1521 as SCAN is running on 1521.

    No your Database config does use hostname/ip + port or a tns-entry pointing to the local_listener. Neither method does care for the home the listener is running from.
    You will however have to take care of the entries in the clusterware, as the listener is a controlled resource. If you manually relocate it, then it will only work until next restart of crs stack.
    The simplest way to switch the home is by running first netca from database home and delete the listener and then switch to grid home run netca again and create the listener.
    netca will take care of registering it with crs with the correct environment settings. You will have a short period where your rac won't have a listener and therefore won't accept new connections until the new listener is up and running.
    Relocating the current listener requires to modify several parameters via crsctl in the cluster registry, but allows doing this node by node without complete outage.
    If you want to go that way, then create another listener from grid home and compare the settings of current listener and of the new listener. You will need to update several parameter before you can relocate it.
    Run this command to show the current settings and compare it to the listener from grid home:
    crsctl stat res ora.LISTENER.lsnr -p
    You will need to modify serveral parameters, ACTION_SCRIPT,AGENT_FILENAME,ALIAS_NAME,ORACLE_HOME and the ACL
    Modify works like this, for ACL you must use the encasing single apostrophe ' and run it as root:
    crsctl modify res ora.LISTENER.lsnr -attr "ACL='owner:oracle:rwx,pgrp:oinstall:rwx,other::r--'"
    I would recommend Version 1 if short outage is acceptable. For both variants verify that you can resolve all tnsnames entries in both homes.
    Regards
    Thomas

  • OEM 10g - ORA-12505: TNS:listener does not currently know of SID...

    Hello,
    In OEM (version 10.1.0.5 on Red Hat linux 4), on the page Database Instance: dbexemple.domain.be
    It says:
    - Database Instance > up
    - Listener > up
    - Agent connection to database > Status: Failed
    Details: Failed to connect to database instance: ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach).
    And my OEM database is always in Blackout state.
    I can connect on the database and if I select from global_name it gives me the good name.
    If I do lsnrctl status
    Service "dbexemple.domain.be" has 1 instance(s).
    Instance "emrep", status READY, has 1 handler(s) for this service...
    If I do lsnrctl services
    Service "dbexemple.domain.be" has 1 instance(s).
    Instance "dbexemple", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:44 refused:0 state:ready
    LOCAL SERVER
    So all looks normal. But my DB is still in blackout state.
    I did stop and start the agent > no change
    I did shutdown and start the database > no change
    I did stop the agent delete the $oracle_home/sysmen/emd/... files and start the agent and emctl upload... > no change
    In the targets.xml file from the agent I have:
    <Target TYPE="oracle_database" NAME="dbexemple.domain.be">
    <Property NAME="OracleHome" VALUE="/oracle/product/db10g"/>
    <Property NAME="UserName" VALUE="###" ENCRYPTED="TRUE"/>
    <Property NAME="MachineName" VALUE="machine.domain.be"/>
    <Property NAME="Port" VALUE="1521"/>
    <Property NAME="SID" VALUE="dbexemple"/>
    <Property NAME="ServiceName" VALUE="dbexemple.domain.be"/>
    <Property NAME="password" VALUE="###" ENCRYPTED="TRUE"/>
    </Target>
    Seems good also
    My tnsnames.ora
    DBEXEMPLE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = machine.domain.be)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dbexemple.domain.be)
    tnsping dbexemple is also good:
    Used LDAP adapter to resolve the alias
    Attempting to contact (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=machine)(PORT=1521)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=dbexemple.domain.be)))
    OK (10 msec)
    The DB is not in the listener.ora but anyway at the startup of the database the database register in the listener (can take some seconds).
    In OEM if I look at blackout, it says no blackout exists
    So after all these verifications my OEM database is still in blackout status and remain in blackout.
    I would like to find the reason why it stays like this and the agent finally stop giving me an error.
    thank you for your help,
    Loïc

    The fact is that I did not set any blackout for the emrep database. (no blackout are set at the moment in fact)
    So, we did change the HDD of the computer were was OEM to another HDD.
    The update to 10.1.0.5 was made before all this (2 weeks) and no problem appears after that.
    There's no blackout in OEM Blackouts:
    No Blackouts found.
    and no blackout with emctl:
    [oracle@computeroem bin]$ ./emctl status blackout
    Oracle Enterprise Manager 10g Release 10.2.0.1.0.
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    No Blackout registered.
    [oracle@computeroem bin]$ ./emctl status blackout emrep
    Oracle Enterprise Manager 10g Release 10.2.0.1.0.
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    No Blackout registered.
    At the link:
    http://computeroem.domain.be:4889/em/console/health/healthSystemError
    I get these:
    Loader
    https://computeroem.domain.be:3872/emd/main/
    14-Jan-2007 10:32:32 PM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ java.sql.SQLException: ORA-20615: Severity received during blackout for : Target up received during blackout for : (target_guid = E9A00D9D6447DF4BE1CF43F7A94BF402) (policy_guid=3BF84446B273FE1F5743FD6293C7E192) (key_value= ) (collection_ts = 2007-01-14 22:32:27) (violation_level =CLEAR) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 959 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 277, File name:Severity
    Loader
    https://computeroem.domain.be:3872/emd/main/
    14-Jan-2007 10:32:32 PM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ Loaded B0000000003.xml with errors; moving to errors directory, File name:/oracle2/product/oms10g/sysman/recv/B0000000003.xml
    Blackouts
    n/a
    14-Jan-2007 6:19:26 PM
    Error
    Duplicate start blackout record for 39EDA0C7E44C422698958F9463393C52 for target E9A00D9D6447DF4BE1CF43F7A94BF402
    Loader
    https://computeroem.domain.be:3872/emd/main/
    12-Jan-2007 3:07:22 PM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ java.sql.SQLException: ORA-20615: Severity received during blackout for : Target up received during blackout for : (target_guid = E9A00D9D6447DF4BE1CF43F7A94BF402) (policy_guid=3BF84446B273FE1F5743FD6293C7E192) (key_value= ) (collection_ts = 2007-01-12 15:07:05) (violation_level =CLEAR) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 959 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 14, File name:Severity
    Loader
    https://computeroem.domain.be:3872/emd/main/
    12-Jan-2007 3:07:22 PM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ Loaded B0000000002.xml with errors; moving to errors directory, File name:/oracle2/product/oms10g/sysman/recv/B0000000002.xml
    Loader
    https://computeroem.domain.be:3872/emd/main/
    12-Jan-2007 3:04:44 PM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ java.sql.SQLException: ORA-20615: Severity received during blackout for : Target down received during blackout for : (target_guid = E9A00D9D6447DF4BE1CF43F7A94BF402) (policy_guid=3BF84446B273FE1F5743FD6293C7E192) (key_value= ) (collection_ts= 2007-01-12 14:56:52) (violation_level =CRITICAL) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 818 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 14, File name:Severity
    Loader
    https://computeroem.domain.be:3872/emd/main/
    12-Jan-2007 3:04:44 PM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ Loaded B0000000001.xml with errors; moving to errors directory, File name:/oracle2/product/oms10g/sysman/recv/B0000000001.xml
    Blackouts
    n/a
    12-Jan-2007 10:10:23 AM
    Error
    end_blackout: unexpected current state 10
    Blackouts
    n/a
    12-Jan-2007
    10:05:28 AM
    Error
    Duplicate start blackout record for FD1380AAEB69BAE53339F58EA0C83ADC for target E9A00D9D6447DF4BE1CF43F7A94BF402
    Loader
    https://computeroem.domain.be:3872/emd/main/
    12-Jan-2007 9:57:16 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ Loaded B0000000001.xml with errors; moving to errors directory, File name:/oracle2/product/oms10g/sysman/recv/B0000000001.xml
    Loader https://computeroem.domain.be:3872/emd/main/
    12-Jan-2007 9:57:15 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ java.sql.SQLException: ORA-20615: Severity received during blackout for : Target up received during blackout for : (target_guid = E9A00D9D6447DF4BE1CF43F7A94BF402) (policy_guid=3BF84446B273FE1F5743FD6293C7E192) (key_value= ) (collection_ts = 2007-01-12 09:56:53) (violation_level =CLEAR) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 959 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 270, File name:Severity
    Loader
    https://computeroem.domain.be:3872/emd/main/
    8-Jan-2007 9:07:17 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ java.sql.SQLException: ORA-20615: Severity received during blackout for : Target up received during blackout for : (target_guid = E9A00D9D6447DF4BE1CF43F7A94BF402) (policy_guid=3BF84446B273FE1F5743FD6293C7E192) (key_value= ) (collection_ts = 2007-01-08 09:07:02) (violation_level =CLEAR) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 959 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 25, File name:Severity
    Loader
    https://computeroem.domain.be:3872/emd/main/
    8-Jan-2007 9:07:17 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ Loaded B0000000003.xml with errors; moving to errors directory, File name:/oracle2/product/oms10g/sysman/recv/B0000000003.xml
    Loader
    https://computeroem.domain.be:3872/emd/main/
    8-Jan-2007 9:04:10 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ Loaded B0000000002.xml with errors; moving to errors directory, File name:/oracle2/product/oms10g/sysman/recv/B0000000002.xml
    Loader
    https://computeroem.domain.be:3872/emd/main/
    8-Jan-2007 9:04:09 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ java.sql.SQLException: ORA-20615: Severity received during blackout for : Target up received during blackout for : (target_guid = E9A00D9D6447DF4BE1CF43F7A94BF402) (policy_guid=3BF84446B273FE1F5743FD6293C7E192) (key_value= ) (collection_ts = 2007-01-08 09:01:54) (violation_level =CLEAR) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 959 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 151, File name:Severity
    Blackouts
    n/a
    8-Jan-2007 8:57:47 AM
    Error
    Duplicate start blackout record for 39EDA0C7E44C422698958F9463393C52 for target E9A00D9D6447DF4BE1CF43F7A94BF402
    Loader
    https://computeroem.domain.be:3872/emd/main/
    8-Jan-2007 8:56:00 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ Loaded B0000000001.xml with errors; moving to errors directory, File name:/oracle2/product/oms10g/sysman/recv/B0000000001.xml
    Loader
    https://computeroem.domain.be:3872/emd/main/
    8-Jan-2007 8:56:00 AM
    Error
    Thread: SeverityLoad https://computeroem.domain.be:3872/emd/main/ java.sql.SQLException: ORA-20615: Severity received during blackout for : Target down received during blackout for : (target_guid = E9A00D9D6447DF4BE1CF43F7A94BF402) (policy_guid=3BF84446B273FE1F5743FD6293C7E192) (key_value= ) (collection_ts= 2007-01-06 01:25:35) (violation_level =CRITICAL) ORA-06512: at "SYSMAN.EM_VIOLATION_CHECKS", line 818 ORA-04088: error during execution of trigger 'SYSMAN.EM_VIOLATION_CHECKS' Error occured at line : 14, File name:Severity
    For the note, mostly I cannot do anything because I have no blackout name for the script. Still reading the note to see if some sql can help.
    Message was edited by:
    Loic

  • ITunes not updating iPod rated songs

    I have used iTunes and iPods for several years. I always use automatic updating. Previously, any change to a song rating I made on my iPod would be reflected in my iTunes library after a sync. Since my most recent iTunes update (7.1.1), I have two problems. (1) iTunes does not update the ratings changes made on my iPod and (2) podcasts which I listen to on my iPod are not marked as "not new" in iTunes. It appears that Apple has screwed up something in the sync process in the newest iTunes version. Is anyone else having this problem?

    I have used iTunes and iPods for several years. I
    always use automatic updating. Previously, any
    change to a song rating I made on my iPod would be
    reflected in my iTunes library after a sync. Since
    my most recent iTunes update (7.1.1), I have two
    problems. (1) iTunes does not update the ratings
    changes made on my iPod and (2) podcasts which I
    listen to on my iPod are not marked as "not new" in
    iTunes. It appears that Apple has screwed up
    something in the sync process in the newest iTunes
    version. Is anyone else having this problem?
    Having exactly the same problem as your first issue. In the playlist of top-rated tunes they all appear. However my iTunes library has 460 relevant tunes, whereas the same playlist on the iPod has 100 fewer. They are greyed out and can't be changed and aren't played.
    Any ideas?
    TIA Dermot
    MacBook Pro   Mac OS X (10.4.9)  

Maybe you are looking for

  • How do i delete all info and macbook before giving it to grandson - (restating?

    Got a new MacBook Pro and want to give my grandson old MacBook - how do I delete all info, etc on the od unit? Can I do a reset like I can on my iPod/iPad?

  • PDF form submit button sends FDF instead of PDF

    i have PDF Form created  in Adobe Acrobat XI Pro i want to send PDF document to webserver my server code ob_start(); $file = file_get_contents("php://input"); //Gets binary PDF Data $time = microtime(true); $newfile = "./customers/" . $time . ".pdf";

  • How to disable the kernel SCTP deamon in Solaris 10

    we have third party sctp implementation on sol8 n sol9. Now we are going to shift it to sol10. while it initiate the INIT message the kernel sctp of peer node send abort back to our node. So i need to disable kernel sctp of peer node. thanks in advan

  • Error in program RFIDESM340. COUNT field

    I have solved the error with BR_BUKRS in the RFIDESM340 setting BFR in u201Clogical databaseu201D in program u201CAttributesu201D. But now I have a new error: u201C Field "COUNT" is unknown. It is neither in one of the specified tablesu201D. Has anyo

  • In MI31 not shown all batches

    Hi, I have run MB52 with batch wise and i got list of stocks with batches then i want to comparision in physical inventory with batches so i run MI31 and comparision material with batches but all materials are not shown in MI31. please guide me or mi