Listing errors prior to running a sequence
Is there a way to display\list errors in TestStand prior to running a sequence.
For example, a section of code changes. It now has more parameters being sent to a function inside a dll.
Up until now the only way to find it to run the code, wait for it to error out, then trace where the offending parameter is.
any suggestions?
thanks
Solved!
Go to Solution.
In TestStand 4.5 and later you can analyze your sequence file and catch this. Unfortunately before that there is no way to do so.
Check out the what's new: http://www.ni.com/teststand/whatsnew/
Here's a link to the actual whitepaper: http://zone.ni.com/devzone/cda/tut/p/id/12254
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Similar Messages
-
Failed to Run Task Sequence (error ocurred while retrieving policy for the computer)
Hi, all of sudden we're getting an issue with SCCM when attempting to deploy an image we get a Failed to Run Task Sequence. Used to work previously, now suddenly it isn't working for any.
Full error:
Failed to Run Task Sequence
An Error occurred while retrieving policy for this computer (0x8009310B). For more information....
Log:
Reading Policy Body. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Parsing Policy Body. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Downloading policy body EAB200A4-EAB00066-6F6BCC28. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Preparing Policy Body Request. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Setting transport. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Setting policy location = ttp://<mp>/SMS_MP/.sms_pol?EAB200A4-EAB00066-6F6BCC28.11_00. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Executing Policy Body Request. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
CLibSMSMessageWinHttpTransport::Send: URL: servername.bla.com.au:80 GET /SMS_MP/.sms_pol?EAB200A4-EAB00066-6F6BCC28.11_00 TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Error. Status code 404 returned TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Found a secure policy. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Trying to decode policy. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
CryptDecryptMessage ( &DecryptParams, pbEncrypted, nEncryptedSize, 0, &nPlainSize, 0 ), HRESULT=8009310b (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,339) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Decoding in non ssl mode failed. Checking if decoding was really needed. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Failed to verify a properly formed XML. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
oPolicy.RequestPolicy((GetPolicyFlags() & POLICY_SECURE) != 0, (GetPolicyFlags() & POLICY_COMPRESS) != 0), HRESULT=8009310b (e:\nts_sccm_release\sms\framework\tscore\tspolicy.cpp,2067) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Failed to download policy EAB200A4-EAB00066-6F6BCC28 (Code 0x8009310b). TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
(*iTSPolicyAssignment)->GetObjects(pszClassName, aTSPolicyObjectArray ), HRESULT=8009310b (e:\nts_sccm_release\sms\framework\tscore\tspolicy.cpp,1224) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
m_pPolicyManager->GetObjects( TS::Policy::TaskSequence::GetClassNameW(), TS::Policy::TaskSequence::GetPolicyCategory(), TS::Policy::TSPolicyAssignment::POLICY_TS_FOR_CD_AND_PXE, aTSPolicyObjectArray ), HRESULT=8009310b (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1205) TSPxe 16/01/2015
2:54:40 PM 1176 (0x0498)
Exiting TSMediaWizardControl::GetPolicy. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
pWelcomePage->m_pTSMediaWizardControl->GetPolicy(), HRESULT=8009310b (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawelcomepage.cpp,303) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Setting wizard error: An error occurred while retrieving policy for this computer (0x8009310B). For more information, contact your system administrator or helpdesk operator. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
WelcomePage::OnWizardNext() TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Confirmation Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Task Sequence Selection Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Variables Selection Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Resolve Progress Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Activating Finish Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Initializing the countdown timer. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Loading bitmap TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Suspending the countdown timer. TSPxe 16/01/2015 2:54:49 PM 1124 (0x0464)
Exiting task sequence wizard. TSPxe 16/01/2015 2:54:51 PM 1124 (0x0464)
Exiting with return code 0x00000000 TSPxe 16/01/2015 2:54:51 PM 1124 (0x0464)
Execution complete. TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
::RegOpenKeyExW (HKEY_LOCAL_MACHINE, c_szSMSTSKey, 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,258) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
GetTsRegValue() failed. 0x80070002. TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
End program: TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Finalizing logging from process 840 TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Finalizing logs to root of first available drive TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Successfully finalized logs to C:\SMSTSLog TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Cleaning up task sequencing logging configuration. TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)CLibSMSMessageWinHttpTransport::Send: URL: servername.bla.com.au:80 GET /SMS_MP/.sms_pol?EAB200A4-EAB00066-6F6BCC28.11_00 TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Error. Status code 404 returned TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
6 (0x0358)
Is the management point still working? Examine mpcontrol.log. Do mplist and mpcert work?
Torsten Meringer | http://www.mssccmfaq.de -
Failed to run task sequence - 80004005. DNS working though.
I seem to be getting a fairly common generic error but with possibly with a slight difference then some of the other problems/answers I have seen. Generally it looks like this is a DNS issue but I am not sure in my case.
Let me 1<sup>st</sup> describe my infrastructure and what I am trying to accomplish. System Center 2012 R2, trying to deploy server 2012. We use PKI on the main MPs/DPs. I have another DP that I will use for OSD content that
won’t use PKI. I am 1<sup>st</sup> attempting to use boot media, vs PXE, to image a computer. I have distributed the content to the DP, created a boot media USB and everything looks good there as far as I can tell. My boot media
selects the PKI MP and we have created the client cert and I direct it to the non-http DP. The process seems to accept the certificate and the boot media creation completes. Next boot off the media on the computer and drop into Windows PE where
I can manually enter the IP information. When I click next the process fails.
Error:
Failed to Run Task Sequence
An error occurred while retrieving policy for this computer (0x80004005).
So starting some of the troubleshooting I F8.
-Can I ping the SCCM site servers? Yes, I can ping, both short and FQDN, the primary, MP, DP.
Looking at the SMSTSLog I see the following lines/errors.
1)Failed to open PXE registry key. Not a PXE boot.
2)Failed to find the source drive where WinPE was booted from
But then the next line is: Executing from Media WinPE
These 2 are at the top of the log and the process seems to continue on with the IP and variable information. These are the lines of information later in the log with the error(s):
-CLibSMSMessageWinHTTPTransport::Send:URL: (my MP)
-In SSL, but with no client cert
-Error. Received 0x80072ee7 from WinHttpSendRequest.
-Hr,HRESULT=80072ee7
-sending with winhttp failed, 80072ee7
-m_pHttp Transport -> (etc….)
-MPKeyInformation.RequestMPKeyInformationForMedia
-Failed to get information of MP: https//(my MP)
So I am wondering where I start. I don’t see that unknown host line that seems to indicate that it is a DNS issue. I see some stuff about the in SSL but with no cert. Does this mean that the cert we had to create isn’t working correctly?
We pretty much followed
http://www.jamesbannanit.com/2012/05/how-to-build-and-capture-in-configuration-manager-2012-using-https/
I have also looked through this
http://blogs.technet.com/b/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
And I have pretty much everything done there except a network access account. Looking at my settings I am set to, “Use the computer account of the Configuration Manager client” However, my computer I am trying to image is a “WORKGROUP” and not
joining the domain. But.. am I really getting that far in the process? Would I be failing to get policy because of this or does this just come into play when I try to get the OS from the DP?Have you seen this thread?
http://social.technet.microsoft.com/Forums/systemcenter/en-US/528c2b54-55ef-4926-bebb-f73ca18a059b/trouble-deploying-windows-7-using-osd-using-pxe-in-sccm-2007-sp2-r3-error-80072ee7?forum=configmgrosd
I have some free manuals http://1drv.ms/1kk6u6j -
MDT 2012 Errors - Won't Run My Windows 8.1 Activation Script/Task Sequences Fail
Hello all,
I've been using MDT 2012 for a while now to image machines in our environment with success for the most part. Just recently, however, I've been running into issues at the point where the deployment is supposed to be activating Windows where it will just fail the deployment. It outputs a number of errors, including:TextWindows cannot remove Microsoft.VCLibs.120.00_12.0.20812.1_x86__8wekyb3d8bbwe because the current user does not have that package installed. Use Get-AppxPackage to see the list of packages installed.NOTE: For additional information, look for [ActivityId] 5f3738f0-b9a2-0001-0581-375fa2b9d001 in the Event Log or use the command line Get-AppxLog -ActivityID 5f3738f0-b9a2-0001-0581-375fa2b9d001]LOG]!+ Get-AppxPackage -AllUsers | Remove-AppxPackage+ ~~~~~~~~~~~~~~~~~~]Which I'm familiar with because I've seen this...
This topic first appeared in the Spiceworks CommunityHi,
Thanks Again for taking a look.
I checked the sysprep log in the image and they look fine. No errors.
As requested here are some logs. Let me know if I can provide anything else.
BDD.log
litetouch.log
SMSTS.log
Im not actually attempting to provide a recovery image. What I am doing is leveraging MDT to refresh the computer remotely. We can update the MDT media on the hidden data partition,when required and kick it off remotely. Some of the computers are very
remote, and without SCCM DP's, plus a combination of slow links and a lack of deskside techs made this a requirement. This works without incident.
The only issue I have is on a new computer if I run the sequence (offline USB media) it will fail the first time, unless I run a diskpart clean in PE first.. Then it will succeed. Refreshing the computer is fine. -
Error Message While Running Sequence from Planning and/or SmartView
Following error is thrown while running a sequence from either planning or smartview at a higher level.
"*An error occurred while running the specified calc script. Check the log for details*"
This is very weird because it does not happened with any of the following:
1. Running same sequence from AAS at higher level
2. Running at lower level entity either planning or smartview
3. Running from Planning or smartview with split sequence at higher level
4. Running each rule within the sequence from Planning or smartview
What have we done?
1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
2. Recycled environment
3. Stopped and restated DB and APP
Other info:
1. DB.log file is 1.2gb
2. No meta data changes
3. We could not able to replicate same in Q and Dev
4. Looked at cache setting
5. Sequence does not fail at the same place
6. Recently updated calclockblockhigh to 15000 (restarted environment)
Environment:
Planning suite: 9.3.0.1 with 9.3.1 APS.
We are going nuts and any feedback is greatly appreciated!
Thanks!
Edited by: venuramini on Jul 9, 2009 3:50 PM
Added environment section.Hi,
To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
Thats if you are using Tomcat of course. A DOS window should then pop.
What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
HBR.timeout
Try setting it to 30000
The restart the AAS service for the changes to take effect.
Hope this helps.
Seb -
Error during scheduling while running Run order sequencing in PPR
Hello Experts,
An error saying 'Error during scheduling' is logged while running Run order sequencing in Production Planning Run and the job is failed.
Checked the capacity of the resource but seems ok.
The below long text is displayed next to the error message.
Error during scheduling
Message no. /SAPAPO/OM043
Diagnosis
The system could not schedule an order, operation or activity.
This could have the following causes:
The resource does not have any free working time or capacity.
If you have set planning direction backwards in the strategy profile:
There is not enough working time or capacity available for scheduling between now and the scheduling date.
If you have set planning direction forwards in the strategy profile:
There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
If you plan characteristics-dependently:
You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
The system cannot find any suitable characteristics on the resources and so it cannot schedule.
Procedure
Depending on which of the above reasons is the cause, change the following settings:
Change the working times and capacities of the resources.
Set the planning mode "infinite planning" in the strategy profile.
Activate the planning direction forwards or backwards and reverse in the strategy profile.
Change the characteristics that you have assigned to the resource.
Can anyone let me know what else need to check to avoid the error.Dear Maddy,
The function "Reschedule" follows an all-or-nothing logic, which means that either all selected activities on a resource can be re-scheduled or the function (better the liveCache) cancels and no activities will be re-scheduled.
One reason might be that you have a pegging relation to a fixed activity (this might be a sales order, forecast, an activity outside the propagation range...) which cannot be considered during the
scheduling. The liveCache cannot break the pegging, therefore it cancels the scheduling.
Please have a look at the note 510669 which offers a heuristic on the basis of the algorithm /SAPAPO/HEUR_PLAN_SEQ_PACKAGES. This heuristic should solve your problem. It will re-schedule as many activities as possible and will not cancel if one fails.
Depending on your current release there could be also some correction notes like
1272960
1027194
I hope I could help you further.
Regards,
Tibor -
Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John. -
Failed to run Task Sequence.
An error occurred while starting the task sequence (0x8007000E)."
While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
SMSTS.log shows
ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
Thanks Gerry for your assistance. -
When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments -
Why I get an error when running a sequence using the LabVIEW operator interface ?
I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
ThanksHello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering -
Failed Run Task Sequence Error (0x80070570)
Hi,
I Have problem with deployment windows vista enterprise:
Failed to Run Task Sequence
An error occurred while starting the task sequence (0x80070570).For More information, please contact your system administrator or helpdesk operator.
It's possible problem Hardware or in my System Center ?
ThanksApologies for resurrecting an old thread. I could not resist as my solution to this issue was far different than what was posted here or anywhere else.
I had this issue on a machine that had been deploying fine with a standard build TS. At some point, this error began occurring every time I invoked the TS.
As it turns out, one time during my testing, I had powered off the machine via the power button in the midst of the TS's routine. This just caused it to go wackadoodle and left behind some files that upon restarting the TS could not be overwritten (for whatever
reason).
To fix, I had to run diskpart via cmd while in PE for the TS. To do this, cmd support must be on for the TS. Just press F8, diskpart, sel dis 0 and clean. Voila! Should be fixed now. Or at least in my case it was. -
Failed to Run Task Sequence (Error 0x80070032)
Hello folks
We just setup the productive SCCM environment and successfully staged many clients. But with one we have some trouble.
I have added the Client with the Hostname and MAC address into SCCM
Added the Client into the Collection where the Task Sequence for staging is applied
Made a boot image on CD-ROM and booted up the client
He can successfully connect to the SCCM Server and also get the right ask Sequence
Bevor starting downloading the Vista OS WIM, the following Error occure:
Failed to Run Task Sequence
An error occured while starting the task sequence (0x80070032).
For more information, please contact ....
I used the Boot CD-ROM successfully on other clients without any problem.
The same Task Sequence was working perfect on other clients
All Clients are HP DC7800 SFF Desktops
BIOS Settings are default by all the Clients
Have tested the same Client on the Test SCCM Environment and got the same problem.
Deleted the Client and re-added it into the SCCM Server
Tried to use different network cable on different location
Client successfully get a DHCP IP address
We have all done so far as I have the knowledge. Any help would kindly be appreachate.
Kind regards
StefanHi folks
As seen in another thread (http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2592075&SiteID=17) that the local smsts.log file located in x:\windows\temp\smstslog\ will help to analyse whats happen in the background, I have seen the following line in the Log:
The active system partition on a MBR system must be NTFS
and
Failed to prepare the system partition for staging.
The request is not supported. (Error: 80070032; Source: Windows)
and
Failed to stage WinPE. Code(0x80070032)
So, I did the steps informed in the other thread to press F8 durcing the Error and used the following in the DOS Box:
Diskpart
Select Disk 0
Clean
After that steps, the Bootprocess worked perfect. It seams that the Disk was partitioned not that good, that WinPE could handle it.
Hope this helps other for analysing.
Cheers
Stefan -
Runtime Error -GETWA_NOT_ASSIGNED when running COI
Hi ALL,
We are getting run time error - GETWA_NOT_ASSIGNED when running COI tasks.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32995).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"GETWA_NOT_ASSIGNED" C
"CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
"REDUCE_GOODWILL_ENTRIES"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
in "REDUCE_GOODWILL_ENTRIES".
The main program was "UCUWB000 ".
The termination occurred in line 722 of the source code of the (Include)
program "CL_UC_COI_ACT_PT==============CM00P"
of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
calling the editor 7220).
702 call method do_inv_net_change->create_data_reference
703 exporting
704 i_type = cl_uc_coi_inv_net=>gc_ref_pt_block
705 io_model = do_model
706 importing
707 er_data = lr_t_data.
708 assign lr_t_data->* to <lt_share_block>.
709 call method do_inv_net_change->get_block
710 importing
711 et_pt_shares = <lt_share_block>.
712
713 create data lr_s_data like line of <lt_share_block>.
714 assign lr_s_data->* to <ls_share_block>.
715 * change due to selling invor's transaction
716 read table <lt_share_block> into <ls_share_block> index 1.
717
718 * direct shares prior to divestiture
719 assign component 'R_TH_DSH_OLD'
720 of structure <ls_share_block> to <lr_th_dsh_old>.
721 assign <lr_th_dsh_old>->* to <lt_dsh_old>.
>>>> create data lr_s_data like line of <lt_dsh_old>.
723 assign lr_s_data->* to <ls_dsh_old>.
724 assign component ucf6_cs_coi_fld-pcnt1
725 of structure <ls_dsh_old> to <pcnt1_7a>.
726
727 * change of direct shares in divestiture
Please provide your suggestions.
Edited by: VM2727 on Feb 10, 2012 3:27 AMOr even these ones:
SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
Symptom
When you execute the consolidation of investments, a program termination
occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
class CL_UC_COI_ACT).
Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
Symptom
When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD. -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
SharePoint Foundation 2010, hotfix install fail "An error occurred while running detection"
Hi all,
I am having a lot of trouble installing hotfix 2849990 on my server. After running it shows the error "An error occurred while running detection". I tried another hotfix as well but got the same result. I read on the web to do a "repair"
but I cannot seem to access that. I attempting to run the install to get there, I click "Install SharePoint Foundation" a new window begins and I can see a new window open that reads "Please wait while setup prepares the necessarily files"
Very shortly after this opens, it then closes and nothing else happens.
Anybody have any suggestions?
Thanks!Thanks for the quick reply. Here is the Folder I am looking in:
"C:\Users\[My User]\AppData\Local\Temp\2" Let me know if this is incorrect.
Here is some of my opatchinstall log:
OPatchInstall: Logging all properties
OPatchInstall: Property 'PACKAGE.KBARTICLE' value '2880975'
OPatchInstall: Property 'PACKAGE.MIN.MSI.VER' value '3.1.0.0'
OPatchInstall: Property 'PACKAGE.NAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PATH.TEMP' value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp'
OPatchInstall: Property 'PACKAGE.PLATFORM' value '64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PRODUCTNAME' value 'Microsoft SharePoint Foundation 2010'
OPatchInstall: Property 'PACKAGE.PROMPT.ALREADYINSTALLED' value 'The update is already installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.CONFIG.AFTERUPDATE' value 'You must install the same SharePoint 2010 Products and patches on every server in your server farm. If you have multiple servers in your farm, please immediately install the same patches on all the other farm servers once this installation has completed.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETECTIONERROR' value 'An error occurred while running detection.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETFAILED' value 'The detection failed, this can be due to a corrupted installation database.'
OPatchInstall: Property 'PACKAGE.PROMPT.ERROR.WITHKB' value 'The installation of this package failed. Please see for more information.'
OPatchInstall: Property 'PACKAGE.PROMPT.EULA' value 'You must accept the Microsoft Software License Terms in order to continue the installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFAILURE' value 'The extraction of files from this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFOLDER' value 'Select a folder to store the extracted files'
OPatchInstall: Property 'PACKAGE.PROMPT.INITIAL' value 'Do you wish to proceed with the installation?'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLCANCELED' value 'The installation of this package was canceled.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLFAILURE' value 'The installation of this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLSUCCESS' value 'The installation is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' value 'There are no products affected by this package installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTADMINUSER' value 'You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTMINMSIVERSION' value 'This program requires Windows Installer 3.1.0.0 (or greater).'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTNEEDED' value 'This package is not needed for the current release of the installed product.'
OPatchInstall: Property 'PACKAGE.PROMPT.PATCHEDBYADMIN' value 'The update cannot be installed due to a previous update was installed through a modified installation source.'
OPatchInstall: Property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' value 'The expected version of the product was not found on the system.'
OPatchInstall: Property 'PACKAGE.PROMPT.REBOOTNEEDED' value 'Do you want to reboot now to complete the installation of this package?'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.CONFIRM' value '&OK'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DETECTION' value 'Please wait while we determine the list of files that need to be updated.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DISABLE' value 'Do ¬ close applications. (A Reboot will be required.)'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.ENABLE' value 'Automatically &close applications and attempt to restart them after setup is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.OPERATION' value 'The following applications should be closed before continuing the install:'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.DETAILSPREBODY' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition failed to install.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALAPPNAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALREPORTEE' value 'Microsoft'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.INTROREG' value 'We apologize for the update installation failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINCAPTION' value 'Report Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition Installation Failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAININTROBOLD' value 'An error report containing information about the updates that failed installation has been generated.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINNOREPORTBTN' value 'Cancel'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINPLEAREG' value 'Using the information in the report we can investigate and potentially fix the problem you experienced. We will treat this report as confidential and anonymous.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINREPORTBTN' value 'Send Report'
OPatchInstall: Property 'PACKAGE.RM.ENABLED' value '0'
OPatchInstall: Property 'PACKAGE.RM.MINOS.VERSION' value '600'
OPatchInstall: Property 'PACKAGE.STRING.CANCEL' value '&Cancel'
OPatchInstall: Property 'PACKAGE.STRING.CANCELCONFIRMATION' value 'Are you sure you want to cancel setup?'
OPatchInstall: Property 'PACKAGE.STRING.CONTINUE' value '&Continue'
OPatchInstall: Property 'PACKAGE.STRING.DETECTING' value 'Please wait while update detection is being run.'
OPatchInstall: Property 'PACKAGE.STRING.EULACHECKBOX' value 'Click here to &accept the Microsoft Software License Terms.'
OPatchInstall: Property 'PACKAGE.STRING.EXTRACTING' value 'Extracting files, please wait...'
OPatchInstall: Property 'PACKAGE.STRING.HELP' value 'Usage:
/extract:path, extracts the content of the package to the path folder
/log[:path to log file], enables verbose logging for the update installation
/lang:lcid, sets the user interface to the specified locale when multiple locales are available within the package
/quiet, runs the package in silent mode
/passive, runs the update without any interaction from the user
/norestart, prevents prompting of user when reboot of machine is needed
/forcerestart, forced restart of machine once update is complete
/?, shows this help message'
OPatchInstall: Property 'PACKAGE.STRING.INSTALLING' value 'Please wait while the update is installed.'
OPatchInstall: Property 'PACKAGE.SUCCESS.WITHERRORS' value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
OPatchInstall: Property 'PATCH.FILEID.EULA' value 'volumelicense_eula_postrtm_en-us.txt'
OPatchInstall: Property 'PATCH.LANG' value '1033'
OPatchInstall: Property 'SYS.ARGS.EXTRACT' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.HELP' value '0'
OPatchInstall: Property 'SYS.ARGS.HELPREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANG' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGVALUE' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LANGVALUEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOG' value '1'
OPatchInstall: Property 'SYS.ARGS.LOGPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LOGPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVE' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIET' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIETREADONLY' value '0'
OPatchInstall: Property 'SYS.ERROR.ARG1' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG2' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG3' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG4' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG5' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.CODE' value '0'
OPatchInstall: Property 'SYS.ERROR.INERROR' value '0'
OPatchInstall: Property 'SYS.ERROR.TYPE' value 'NONE'
OPatchInstall: Property 'SYS.LANG.LCID' value '1033'
OPatchInstall: Property 'SYS.LANG.NAME' value 'en-us'
OPatchInstall: Property 'SYS.LANG.RTL' value '0'
OPatchInstall: Property 'SYS.MSI.VER' value '5.0.7601.17807'
OPatchInstall: Property 'SYS.PATCH.NEEDREBOOT' value '0'
OPatchInstall: Property 'SYS.PATCH.SUGGESTREBOOT' value '0'
OPatchInstall: Property 'SYS.PROC.RESULT' value '0'
OPatchInstall: Property 'SYS.WIN.ARCHITECTURE' value 'X64'
OPatchInstall: Property 'SYS.WIN.PACKAGEPATH' value 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Property 'SYS.WIN.PLATFORM' value 'WINNT'
OPatchInstall: Property 'SYS.WIN.SHELLVER' value '6.1.7601.18429'
OPatchInstall: Property 'SYS.WIN.SPLEVEL' value '100'
OPatchInstall: Property 'SYS.WIN.SYSTEMLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.USERADMIN' value '1'
OPatchInstall: Property 'SYS.WIN.USERLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.VER' value '601'
OPatchInstall: End of all properties
OPatchInstall: Setting system property 'SYS.ARGS.LOGREADONLY' with value '1'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATH' with value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATHREADONLY' with value '1'
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.LOG' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'LOGPATH' to value '$(fullPath:SYS.ARGS.LOGPATH)'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.LOG' is equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: Setting property 'LOGPATH' to value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionExtractFile
OPatchInstall: CActionExtractFile::initFromElement starts
OPatchInstall: Will extract the file with ID '$(PATCH.FILEID.EULA)' to the path '$(PACKAGE.PATH.TEMP)\eula.txt'
OPatchInstall: CActionExtractFile::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionExtractFile::execute starts
OPatchInstall: Will extract the file with ID 'volumelicense_eula_postrtm_en-us.txt' to the path 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: Getting the data from the file 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Successfully retrieved the data location and size
OPatchInstall: CActionExtractFile::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: Executing CConditionBooleanOperator::evaluate
OPatchInstall: The property 'SYS.ERROR.INERROR' exists
OPatchInstall: The property 'SYS.ERROR.INERROR' is not equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.NOEULA.PROMPT' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.NOEULA.PROMPT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.PASSIVE' is equal to '0'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'PACKAGE.NOEULA.PROMPT' doesn't exist
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: CActionPromptEULA::execute starts
OPatchInstall: Running in full UI, will show the EULA dialog
OPatchInstall: Reading EULA from file 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: User Accepted the EULA, executing the Accept action list
OPatchInstall: Finished executing the Accept action list
OPatchInstall: CActionPromptEULA::execute ends
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListOr>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to ''
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to 'NONE'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptFolder
OPatchInstall: CActionPromptFolder::initFromElement starts
OPatchInstall: Will prompt the user with the title '$(PACKAGE.PROMPT.EXTRACTFOLDER)' and store the folder in 'PACKAGE.EXTRACT.FOLDER' if cancelled will set 'PACKAGE.FOLDER.CANCELED'
OPatchInstall: CActionPromptFolder::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.FOLDER.CANCELED' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.FOLDER.CANCELED' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17023'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLCANCELED)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionCreateFolder
OPatchInstall: CActionFile::initFromElement starts
OPatchInstall: Will check for file '$(PACKAGE.EXTRACT.FOLDER)'
OPatchInstall: CActionFile::initFromElements ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17024'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.EXTRACTFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ca-es.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ca-es.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
Maybe you are looking for
-
10.8: Copying calendars over from an unbootable image
My server's hard disk became corrupt and was no longer bootable, nor repairable to the point where it's bootable. I have a complete disk image of the unbootable volume. I also have a bootable image of that same server but it's a few months old and
-
Finder crash lion 10.7.4
After reinstalling my system there is one problem when i´m using parallels 7. there is no specific reason for me. the finder crash during copy a pdf document or just during writing a mail in parallels using windows xp. i have done all the updates for
-
Problems to generate a graph using 2 views as 2 curves
Hello everybody Please help me fix this problem. Oracle 9i Database,reports-->graph wizard I have 2 views in the database named FR1,FR2 and these 2 views are nothing but snapshots of data from a single table WDATA for selected data . The views a
-
Vendor master data - Bank Account field len too short
Dear Expert, My client trying to create a vendor when she maintains the Bank account number under the bank detail and she encounterred error message "Entry in field Bank Acct. No is longer than 10 characters" where can I extend the field to 11 charac
-
How to add a root entry?
I used Oracle Unified Directory with Directory Services Manager. I tried to create a new root entry. Following http://docs.oracle.com/cd/E17904_01/oid.1111/e10029/oid_dir_entries.htm#i43505, I left Parent Entry field blank. But it prompt "A value is