Listing up business transactions from Account's View
Hie, When we Open Ship to party from IC Web, We have Assignment block "Quotations" at IC WEB from Accounts view. But it does not pull any quotations.
But it does pull for sold to party. I have checked SPRO settings for Customer Relationship Management->Master Data->Business Partner->Specify Display Options for Business Transactions and I maintained Area = QU.
But i still cant see Qutation list from Account's VIEW.
Can anyone advice me please? where i can make settings for Sold to part , ship to party etc??
thanks and regards,
Dinesh.
Hi,
this is something which you can´t change by configuration.
You have to do a small UI-development.
Open your component / view in tx bsp_wd_cmpwb.
I guess in your case the component is BP_BPBT and the view is AccountQuotationsOV.
You have to go to the context node.
Here please check the coding in ON_NEW_FOCUS and redefine it according to your needs.
Kind regards
Manfred
Similar Messages
-
Vendor list - not get transaction from last three years
Dear Sir,
Can we have a list of vendor which are not get transaction from last three years ?
Vijay Vadgaonkar
SAP MMeither you write a z-report
or you download all vendor numbers from LFA1 table
then run MC$4 transaction for analyzing period of last 3 year.
download the vendor numbers from this report as well.
Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
However, these are the inactive vendors from purchasing point of view only.
vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities. -
Execute Business Transaction from xMII via XI to SAP R/3
Hello everyone,
I have a requirement to post the SAP R/3 transaction from xMII via XI. Does anyone one could give me the steps needs to follow to accomplish this.
Thanks,
MaheshMahesh,
So as i understand your flow is xMII -> XI -> SAP ECC. So basically in this case u can setup XI to host a web service and xMII can call the web-service and post the data to XI. You will have to get the WSDL for the XI Web Service and then use it in the Web Service action block in xMII to consume. You will also need to setup the soap adapter in XI to receive the web service call from xMII. Once xMII calls the web service, XI can then update the data into SAP ECC either thru Idoc or RFC adapter.
So once your trigger point in xMII is activated, it should call the BLS which in turn will call the XI Web Service and post the data to XI.
In case the scenario is the other way round you can also host your BLS as a Web Service in xMII. XI can then call the web service and send the data to xMII. Alternatively you can also use the http post action block in xMII to do the same.
Let me know if you need anymore info.
Thanks,
Kapil. -
Call List and Business Transactions Syncronization
Hi Everyone:
I´m working in a IC Win CLient 5.0 implementation and I need that once the bussines transaction is saved, the corresponding call list is updated ( set to complete ). I already follow al the call list and BT syncronization customizing but still is not working.
Can anybody help me with this issue? There is something else that I have to check
Thans in advanced
regards
Allen RiosHi Sarasakumari:
I aprecciate that only use the reply function in order to answer and specific question not to post a new one. If you want to do that, please use the post function in the CRM Forum.
So please, I´ll still looking forward a answer for this question.
Regards
Allen -
Transferring Business transactions from one G L A/c to another GL
Hello All,
In one GL (General Ledger) A/C I forget to select the OPEN ITEM MANAGEMENT option. Then later I posted entries in thatGL A/C. Now I want to clear that GL A/C. But its giving error (Its saying your open item management is not selected). After posting data in that GL A/C it is not possible to select OPEN ITEM MANAGEMENT option. So I created a new GL A/C. Now I want to transfer the data from old GL A/C to new GL A/C. Can anybody help me, how to solve this problem.
Rgards,
arunaHello Aruna,
You need not to create new GL account, there is a program to activate open item management, depending on which version of SAP you are in. Its RFSEPA01 or RFSEPA02, you need to copy this program into a Z program & run it.
Now in your case, since you have already opened another GL account, no problem. You can start posting a JV or transfer entries from the old account to the new account, so the balance in the Old GL account is nullified and then you can block the old GL account.
First make the balance of old GL acct by passing a dummy entry in f-02 for exactly the same amt. By this old GL acct will become ZERO then => go to FS00 (in change mode) and select the check box for the OPEN ITEM SELECTION. See whether you can work like this and make a payment for the existing open Item.
hope this is usefull.
Regrads,
shashikanth. -
How to create a custom Contacts list in SharePoint 2010 from accounts already in AD
Hi folks,
Newbie to SharePoint but not to being an Administrator. Problem is that in my new functions I no longer am an Admin.
I have been asked to post contact lists (Excel) on the SharePoint site. (fairly easy to do)
But I though....we already have these people in AD and the GAL
Why can't I just import what I want only and display that in SharePoint.
I assume this is possible?
I do not have SharePoint designer nor any programming experience....so no coding for me.
Running SharePoint 2010 and Outlook 2010
Can anyone guide me or give me info on how to do this?
I do not want everyone in the AD/GAL. Just some specific names with their contact infoHi,
Please check this
http://beyondweblogs.com/update-user-profile-in-sharepoint-programmatically/ -
Creation of business transactions with product information from a campaign
Hi,
I need to create business transactions from a campaign execution, but I need that these business transactions are created with a specific product and quantity 1.
Is this possible?
I tried to assign Products on Product tab of campaign, and to assign a document template in Campaign, but nothing worked.
Thanks a lot.
Susana MessiasHi
you can create business transactions from campaigns executed useing the following settings
in order to create the transaction after executing the campaign you need to maintain following custimising settings
Define communication medium
select the channel for which you want to create transaction automatically under communication medium and select communication meathod and transaction type assign the under define communication meathod assign ther the transaction aganist the internet mail SMTP to the transaction type to it and you can use appropriate BADI for assigning the product with the quantity as you desired
reward points if helpful
regards
Dinaker vikas -
CRM Middleware help for rookie needed.. Replication of Business Transaction
Hi guys,
I try to set up replication of Business Transactions from R/3 to CRM and vice versa.
I have created:
- CRM site type (CRM) , R/3 type site (R46CLNT700)
then I created a subscription: SalesDocuments (R46CLNT700 is assigned to this subscription) for publication "All Business Transactions (MESG)".
a, Is this enough configuration of MW for needed replication? Or do I need more settings set up?
b, When I try to start initial load of the Replication object BUS_TRANS_MSG (which is "in" publication All Business Transactions), I am not able to start Load from CRM to R46CLNT700).. As target I can use only CDB... What is wrong?
c, If I create some sales transaction in CRM system and I want it to be replicated to R/3 and vice versa, how will I know, which replication object represents this document? For example, I create a Sales Order. How will I know, which replication object to set up for replication?
Thanx a lot! PeterPeter,
1.If you are looking for Initial download from CRM to R/3, this should be possible from CRM v4.0.
2. Delta flow between the systems should happen once your initial download is complete.
3. Check the Inbound and Outbound queues in CRM. If they seems to be hanging for long time, check whether you have registered the Inbound & Oubtound queues in SMQR and SMQS transaction on both CRM and R/3.
Regards,
Phani.
Wipro Technologies -
What is Business Transaction in CRM
Hi,
What is Business Transaction in CRM? What is deifference between partner and partner_guid? What is significance? and also product, prodcut_guid?
Thanks,
ShashikanthHi Shashikanth,
Most of the transaction that you carry out in CRM are Business Transaction. E.G. Service Contract, Activities, Lead, Task etc.
Business Transactions are further divided into Subobject Category, these Subobject Categories are again subdivided into Transaction Type.
<b>Categorization of CRM Business Transaction based on Subobject Category</b>
Business Transaction Name SUBOBJECT CATEGORY
Activity BUS2000126
Service Contract BUS2000112
Lead BUS2000108
Opportunity BUS2000111
Task BUS2000125
Utility contract item BUS2000147
Note:
1. For Example if you want to retrieve all the activities in CRM, pass the OBJECT_TYPE as BUS2000126 in CRMD_ORDER_INDEX table.
2. The Subobject Category can be customized for a business transaction from the transaction SPRO.
Partner : Partner is a 10 char number used to identify Business Partner in the system.
PArtner GUID : It is global unique identifier to identify the partner globally.
As such there is no difference in partner and partner guid, both refer to the same entity in CRM and are unique across the system. Refer the table BUT000.
Same applies to product and product guid. Refer the table CRMM_PRODUCT.
<b>Reward points if it helps and close the thread.</b> -
Master table for "Business Transaction"
Dear all,
Do you where can i get a list of "Business transaction" MLHD-GLVOR?
FYI, this is MM related "Business transaction".
Please comment.
Thanks in advance.Hi,
CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
link:[http://forum.saptechies.com/viewtopic.php?t=3349]
search in this link.
check this hope it'll help.
Regards,
Sneha. -
Business transaction key in account determination..?
Hi all
Can anybody explain me in simple form form, what is business transaction key in account determination , for eg, GBB,BSA,BSX,PRD,VBR,.WRX....etc (Approximately 60 transaction keys in std SAP)
If i want to do configuration the for new client, what are all the business transaction key,,, How the configuration wil happen..?
Pls giv me expaination,
Reply will be rewardable..
Thanks
sap-mmHi MM,
Please Search in SDN threads solution is given already in lot of threads.
Go to SAP Library
SPRO> Help> SAP Library
Or go to SPRO> IMG> MM>Valuation and Account Assignment>Account determination> Account det without wizard> configure Automatic postings
Click on IMG ACTIVITY DOCUMENTATION
These transactions are important for Accounts.
Postings are made to G/L accounts automatically in the case of Invoice Verification and Inventory Management transactions relevant to Financial and Cost Accounting.
Example:
Posting lines are created in the following accounts in the case of a goods issue for a cost center:
Stock account
Consumption account
Agency business: income (AG1)
This transaction can be used in agency business for income deriving from commission (e.g. del credere commission). The account key is used in the calculation schemas for agency business to determine the associated revenue accounts.
Agency business: turnover (AG2)
This transaction can be used in agency business if turnover (business volume) postings are activated in Customizing for the payment types. The account key is specified in Customizing for the billing type.
Agency business: expense (AG3)
This transaction can be used in agency business for commission expenses. The account key is used in the calculation schemas for agency business to determine the associated expense accounts.
Expense/revenue from consumption of consignment material (AKO)
This transaction is used in Inventory Management in the case of withdrawals from consignment stock or when consignment stock is transferred to own stock if the material is subject to standard price control and the consignment price differs from the standard price.
Expenditure/income from transfer posting (AUM)
This transaction is used for transfer postings from one material to another if the complete value of the issuing material cannot be posted to the value of the receiving material. This applies both to materials with standard price control and to materials with moving average price control. Price differences can arise for materials with moving average price if stock levels are negative and the stock value becomes unrealistic as a result of the posting. Transaction AUM can be used irrespective of whether the transfer posting involves a transfer between plants. The expenditure/income is added to the receiving material.
Provisions for subsequent (end-of-period rebate) settlement (BO1)
If you use the "subsequent settlement" function with regard to conditions (e.g. for period-end volume-based rebates), provisions for accrued income are set up when goods receipts are recorded against purchase orders if this is defined for the condition type.
Income from subsequent settlement (BO2)
The rebate income generated in the course of "subsequent settlement" (end-of-period rebate settlement) is posted via this transaction.
Income from subsequent settlement after actual settlement (BO3)
If a goods receipt occurs after settlement accounting has been effected for a rebate arrangement, no further provisions for accrued rebate income can be managed by the "subsequent settlement" facility. No postings should be made to the account normally used for such provisions. As an alternative, you can use this transaction to post provisions for accrued rebate income to a separate account in cases such as the one described.
Supplementary entry for stock (BSD)
This account is posted when closing entries are made for a cumulation run. This account is a supplementary account to the stock account; that is, the stock account is added to it to determine the stock value that was calculated via the cumulation. In the process, the various valuation areas (for example, commercial, tax), that are used in the balance sheet are taxed separately.
Change in stock (BSV)
Changes in stocks are posted in Inventory Management at the time goods receipts are recorded or subsequent adjustments made with regard to subcontract orders.
If the account assigned here is defined as a cost element, you must specify a preliminary account assignment for the account in the table of automatic account assignment specification (Customizing for Controlling) in order to be able to post goods receipts against subcontract orders. In the standard system, cost center SC-1 is defined for this purpose.
Stock posting (BSX)
This transaction is used for all postings to stock accounts. Such postings are effected, for example:
In inventory management in the case of goods receipts to own stock and goods issues from own stock
In invoice verification, if price differences occur in connection with incoming invoices for materials valuated at moving average price and there is adequate stock coverage
In order settlement, if the order is assigned to a material with moving average price and the actual costs at the time of settlement vary from the actual costs at the time of goods receipt
Because this transaction is dependent on the valuation class, it is possible to manage materials with different valuation classes in separate stock accounts.
Revaluation of other consumption (COC)
This transaction/event key is required for the revaluation of consumption in Actual Costing/Material Ledger.
Revaluation of consumption valuates single-level consumption using the actual prices determined in the Actual Costing/Material Ledger application. This revaluation can either take place in the account where the original postings were made, or in a header account.
The header account is determined using the transaction/event key COC.
Del credere (DEL)
Transaction/event key for the payment/invoice list documents in Purchasing. The account key is needed in the calculation schema for payment/settlement processing to determine the associated revenue accounts.
Small differences, Materials Management (DIF)
This transaction is used in Invoice Verification if you define a tolerance for minor differences and the balance of an invoice does not exceed the tolerance.
Purchase account(EIN), purchase offsetting account (EKG), freight purchase account (FRE)
These transactions are used only if Purchase Account Management is active in the company code.
Note
Due to special legal requirements, this function was developed specially for certain countries (Belgium, Spain, Portugal, France, Italy, and Finland).
Before you use this function, check whether you need to use it in your country.
Freight clearing (FR1), provision for freight charges (FR2), customs duty clearing (FR3), provision for customs duty (FR4)
These transactions are used to post delivery costs (incidental procurement costs) in the case of goods receipts against purchase orders and incoming invoices. Which transaction is used for which delivery costs depends on the condition types defined in the purchase order.
You can also enter your own transactions for delivery costs in condition types.
External service (FRL)
The transaction is used for goods and invoice receipts in connection with subcontract orders.
If the account assigned here is defined as a cost element, you must specify a preliminary account assignment for the account in the table of automatic account assignment specification (Customizing for Controlling) in order to be able to post goods receipts against subcontract orders. In the standard system, cost center SC-1 is defined for this purpose.
External service, delivery costs (FRN)
This transaction is used for delivery costs (incidental costs of procurement) in connection with subcontract orders.
If the account assigned here is defined as a cost element, you must specify a preliminary account assignment for the account in the table of automatic account assignment specification (Customizing for Controlling) in order to be able to post goods receipts against subcontract orders. In the standard system, cost center SC-1 is defined for this purpose.
Offsetting entry for stock posting (GBB)
Offsetting entries for stock postings are used in Inventory Management. They are dependent on the account grouping to which each movement type is assigned. The following account groupings are defined in the standard system:
Purchase order with account assignment (KBS)
You cannot assign this transaction/event key to an account. It means that the account assignment is adopted from the purchase order and is used for the purpose of determining the posting keys for the goods receipt.
Exchange Rate Differences Materials Management(AVR) (KDG)
When you carry out a revaluation of single-level consumption in the material ledger for an alternative valuation run, the exchange rate difference accounts of the materials are credited with the exchange rate differences that are to be assigned to the consumption.
Exchange rate differences in the case of open items (KDM)
Exchange rate differences in the case of open items arise when an invoice relating to a purchase order is posted with a different exchange rate to that of the goods receipt and the material cannot be debited or credited due to standard price control or stock undercoverage/shortage.
Differences due to exchange rate rounding, Materials Management (KDR)
An exchange rate rounding difference can arise in the case of an invoice made out in a foreign currency. If a difference arises when the posting lines are translated into local currency (as a result of rounding), the system automatically generates a posting line for this rounding difference.
Exchange Rate Differences from Lower Levels (KDV)
In multi-level periodic settlement in the material ledger, some of the exchange rate differences that have been posted during the period in respect of the raw materials, semifinished products and cost centers performing the activity used in the manufacture of a semifinished or finished product are debited or credited to that semifinished or finished product.
Consignment liabilities (KON)
Consignment liabilities arise in the case of withdrawals from consignment stock or from a pipeline or when consignment stock is transferred to own stock.
Depending on the settings for the posting rules for the transaction/event key KON, it is possible to work with or without account modification. If you work with account modification, the following modifications are available in the standard system:
None for consignment liabilities
PIP for pipeline liabilities
Offsetting entry for price differences in cost object hierarchies (KTR)
The contra entry for price difference postings (transaction PRK) arising through settlement via material account determination is carried out with transaction KTR.
Accruals and deferrals account (material ledger) (LKW)
If the process of material price determination in the material ledger is not accompanied by revaluation of closing stock, the price and exchange rate differences that should actually be applied to the stock value are contra-posted to accounts with the transaction/event key LKW.
If, on the other hand, price determination in the material ledger is accompanied by revaluation of the closing stock, the price and exchange rate differences are posted to the stock account (i.e. the stock is revalued).
Price Difference from Exploded WIP (Lar.) (PRA)
If you use the WIP revaluation of the material ledger, the price variances of the exploded WIP stock of an activity type or a business process are posted to the price differences account with transaction/event key PRA.
Differences (AVR Price) (PRC)
In the alternative valuation run in the material ledger, some of the variances that accrue interest in the cost centers, are transfer posted to the semifinished or finished product.
Price differences (PRD)
Price differences arise for materials valuated at standard price in the case of all movements and invoices with a value that differs from the standard price. Examples: goods receipts against purchase orders (if the PO price differs from the standard pricedardpreis), goods issues in respect of which an external amount is entered, invoices (if the invoice price differs from the PO price and the standard price).
Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account.
Depending on the settings for the posting rules for transaction/event key PRD, it is possible to work with or without account modification. If you use account modification, the following modifications are available in the standard system:
None for goods and invoice receipts against purchase orders
PRF for goods receipts against production orders and
order settlement
PRA for goods issues and other movements
PRU for transfer postings (price differences in the case
of external amounts)
Price Differences (Material Ledger, AVR) (PRG)
When you carry out a revaluation of single-level consumption in the material ledger during the alternative valuation run, the price difference accounts of the materials are credited with the price differences that are to be assigned to the consumption.
Price differences in cost object hierarchies (PRK)
In cost object hierarchies, price differences occur both for the assigned materials with standard price and for the accounts of the cost object hierarchy. In the course of settlement for cost object hierarchies after settlement via material account determination, the price differences are posted via the transaction PRK.
Price Difference from Exploded WIP (Mat.) (PRM)
If you use the WIP revaluation of the material ledger, the price and exchange rate differences of the exploded WIP stock of a material are posted to the price difference account with transaction/event key PRM.
Price differences, product cost collector (PRP)
During settlement accounting with regard to a product cost collector in repetitive manufacturing, price differences are posted with the transaction PRP in the case of the valuated sales order stock.
This transaction is currently used in the following instances only:
Production cost collector in Release 4.0
Product cost collector in IS Automotive Release 2.0 (product cost collector in connection with APO)
Offsetting entry: price differences, product cost collector (PRQ)
The offsetting (contra) entry to price difference postings (transaction PRP) in the course of settlement accounting with respect to a product cost collector in repetitive manufacturing in the case of the valuated sales order stock is carried out via transaction PRQ.
This transaction is currently used in the following instances only:
Production cost collector in Release 4.0
Product cost collector in IS Automotive Release 2.0 (product cost collector in connection with APO)
Price Differences from Lower Levels (PRV)
In multi-level periodic settlement in the material ledger, some of the price differences posted during the period in respect of the raw materials, semifinished products, and cost centers performing the activity used in a semifinished or finished product, are transfer posted to that semifinished or finished product.
Price differences for material ledger (PRY)
In the course of settlement in the material ledger, price differences from the material ledger are posted with the transaction PRY.
Expense and revenue from revaluation (retroactive pricing, RAP)
This transaction/event key is used in Invoice Verification within the framework of the revaluation of goods and services supplied for which settlement has already taken place. Any difference amounts determined are posted to the accounts assigned to the transaction/event key RAP (retroactive pricing) as expense or revenue.
At the time of the revaluation, the amounts determined or portions thereof) are posted neither to material stock accounts nor to price difference accounts. The full amount is always posted to the "Expense from Revaluation" or "Revenue from Revaluation" account. The offsetting (contra) entry is made to the relevant vendor account.
Invoice reductions in Logistics Invoice Verification (RKA)
This transaction/event key is used in Logistics Invoice Verification for the interim posting of price differences in the case of invoice reductions.
If a vendor invoice is reduced, two accounting documents are automatically created for the invoice document. With the first accounting document, the amount invoiced is posted in the vendor line. An additional line is generated on the invoice reduction account to partially offset this amount. With the second accounting document, the invoice reduction is posted in the form of a credit memo from the vendor. The offsetting entry to the vendor line is the invoice reduction account. Hence the invoice reduction account is always balanced off by two accounting documents within one transaction.
Provision for delivery costs (RUE)
Provisions are created for accrued delivery costs if a condition type for provisions is entered in the purchase order. They must be cleared manually at the time of invoice verification.
Taxes in case of transfer posting GI/GR (TXO)
This transaction/event key is only relevant to Brazil (nota fiscal).
Revenue/expense from revaluation (UMB)
This transaction/event key is used both in Inventory Management and in Invoice Verification if the standard price of a material has been changed and a movement or an invoice is posted to the previous period (at the previous price).
Expenditure/income from revaluation (UMD)
This account is the offsetting account for the BSD account. It is posted during the closing entries for the cumulation run of the material ledger and has to be defined for the same valuation areas.
Unplanned delivery costs (UPF)
Unplanned delivery costs are delivery costs (incidental procurement costs) that were not planned in a purchase order (e.g. freight, customs duty). In the SAP posting transaction in Logistics Invoice Verification, instead of distributing these unplanned delivery costs among all invoice items as hitherto, you have the option of posting them to a special account. A separate tax code can be used for this account.
Input tax, Purchasing (VST)
Transaction/event key for tax account determination within the "subsequent settlement" facility for debit-side settlement types. The key is needed in the settlement schema for tax conditions.
Inflation posting (WGB)
Transaction/event key that posts inflation postings to a different account, within the handling of inflation process for the period-end closing.
Goods issue, revaluation (inflation) (WGI)
This transaction/event key is used if already-posted goods issues have to be revaluated following the determination of a new market price within the framework of inflation handling.
Goods receipt, revaluation (inflation) (WGR)
This transaction/event key is used if already-effected transfer postings have to be revaluated following the determination of a new market price within the framework of inflation handling. This transaction is used for the receiving plant, whereas transaction WGI (goods receipt, revaluation (inflation)) is used for the plant at which the goods are issued.
WIP from Price Differences (Internal Activity) (WPA)
When you use the WIP revaluation of the material ledger, the price variances from the actual price calculation that are to be assigned to the WIP stock, an activity type or a business process are posted to the WIP account for activities.
WIP from Price Differences (Material) (WPM)
When you use the WIP revaluation of the material ledger, the price and exchange rate differences that are to be assigned to the WIP stock of a material are posted to the WIP account for material.
GR/IR clearing (WRX)
Postings to the GR/IR clearing account occur in the case of goods and invoice receipts against purchase orders. For more on the GR/IR clearing account, refer to the SAP Library (documentation MM Material Valuation).
Caution
You must set the Balances in local currency only indicator for the GR/IR clearing account to enable the open items to be cleared. For more on this topic, see the field documentation.
GR/IR clearing for material ledger (WRY)
This transaction/event key is not used from Release 4.0 onwards.
Prior to 4.0, it was used for postings to the GR/IR clearing account if the material ledger was active. As of Release 4.0, the transaction is no longer necessary, since postings to the GR/IR account in parallel currencies are possible.
Reg,
Ashok
assign points if useful. -
Business Transactions missing under reference data while account Merge
Hi Experts,
I am using SAP Standard account merge utility available in CRM 7.0 . After confirming Master and Source account in cleansing report when the overview page opens for confirmation and for address confirmation, i am not able to see Business transaction under the "Reference Data". all other data entities are present.
please provide me the inputs for whether some customization is missing or some setting needs to do.
<< Moderator message - Please do not offer points >>
Regards,
Sanket Chougule
Edited by: Rob Burbank on Dec 8, 2010 3:58 PMthanks for the reply again.
we can hide or can control the data to be get listed in the refrence data . there is a simple customizing (T Code BUSWU02), there on right hand side we need maintain the data entity that needs to get displayed and to be merge with Master.
For more details go to bellow mentioned link:
http://help.sap.com/saphelp_crm70/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
my problem is solved and now business transactions are listed in under reference Data.
Thanks,
Sanket Chougule -
Launch SAP Transaction from UWL and decision views
Hi,
Q1:
we wan't to launch a SAP Transaction from the Universal Worklist. Does anyone know how to do this explicitly?
Q2:
I have tried to add decisions directly to a List View, i.e. with the reject and approve columns. The columns do appear, but the checkboxes are not visible. From the log I can see a warning "No Custom Attribute exists for item ...".
The three options do appear correctly when you go to the details view for the item, and I did apply the same values for the actions (1,2,3).
Does anyone know how to do this?
PS! I have read the How To document, but could not find the answer there, nor in this forum.
Thanks,
MikkelI did fix question 2 above.
Still don't have a solution on how to launch a SAP Transaction. XML transcript below:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'>
<UWLConfiguration version="1.0">
<ItemTypes>
<ItemType name="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000131" connector="WebFlowConnector" defaultView="TripApprovalView" defaultAction="viewDetail" executionMode="pessimistic">
<ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS20000131" connector="WebFlowConnector"/>
<Actions>
<Action name="1" userDecision="yes" handler="UserDecisionHandler"/>
<Action name="2" userDecision="yes" handler="UserDecisionHandler"/>
<Action name="3" userDecision="yes" handler="UserDecisionHandler"/>
</Actions>
</ItemType>
<ItemType name="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000135" connector="WebFlowConnector" defaultView="TripCheckView" defaultAction="viewDetail" executionMode="pessimistic">
<ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS20000135" connector="WebFlowConnector"/>
<Actions>
<Action name="1" userDecision="yes" handler="UserDecisionHandler"/>
<Action name="2" userDecision="yes" handler="UserDecisionHandler"/>
</Actions>
</ItemType>
<ItemType name="uwl.task.webflow.SAP_R3_HumanResources_TS40007901" connector="WebFlowConnector" defaultView="TimeApprovalView" defaultAction="launchSAPAction" executionMode="pessimistic">
<ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS40007901" connector="WebFlowConnector"/>
<Actions>
<!--
<Action name="launchSAPAction" userDecision="no" handler="SAPTransactionLauncher" referenceBundle="launch_sap">
<Properties>
<Property name="GuiType" value="WinGui"/>
</Properties>
</Action>
-->
<!--
<Action name="launchSAPAction" userDecision="no" handler="SAPTransactionLauncher" referenceBundle="launch_sap">
<Properties>
<Property name="myfunc" value="CATS_APPR"/>
</Properties>
</Action>
-->
</Actions>
</ItemType>
</ItemTypes>
<Views>
<View name="TripApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000131" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate, approveCol, reviseCol, rejectCol" sortby="priority:descend, dueDate:ascend" tableDesign="ALTERNATING" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="both" referenceBundle="tasks">
<Descriptions default="Approve Trip">
<ShortDescriptions>
<Description Language="no" Description="Godkjenning Reise"/>
</ShortDescriptions>
</Descriptions>
<DisplayAttributes>
<DisplayAttribute name="approveCol" type="radiobutton" actionRef="1" hAlign="CENTER">
<Descriptions default="Approve">
<ShortDescriptions>
<Description Language="no" Description="Godkjenn"/>
</ShortDescriptions>
</Descriptions>
</DisplayAttribute>
<DisplayAttribute name="reviseCol" type="radiobutton" actionRef="2" hAlign="CENTER">
<Descriptions default="Revise">
<ShortDescriptions>
<Description Language="no" Description="Returner"/>
</ShortDescriptions>
</Descriptions>
</DisplayAttribute>
<DisplayAttribute name="rejectCol" type="radiobutton" actionRef="3" hAlign="CENTER">
<Descriptions default="Reject">
<ShortDescriptions>
<Description Language="no" Description="Avvis"/>
</ShortDescriptions>
</Descriptions>
</DisplayAttribute>
</DisplayAttributes>
<Actions>
<!--
<Action name="1" userDecision="yes" handler="UserDecisionHandler"/>
<Action name="2" userDecision="yes" handler="UserDecisionHandler"/>
<Action name="3" userDecision="yes" handler="UserDecisionHandler"/>
-->
<Action name="submitUserDecisions" userDecision="yes" handler="UIActionHandler" referenceBundle="submit"/>
<Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
<Properties>
<Property name="type" value="button"/>
<Property name="onClick" value="onForceRefresh"/>
</Properties>
</Action>
</Actions>
</View>
<View name="TripCheckView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000135" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate,approveCol,reviseCol" sortby="priority:descend, dueDate:ascend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="top" referenceBundle="tasks">
<Descriptions default="Check Trip">
<ShortDescriptions>
<Description Language="no" Description="Kontroller Reise"/>
</ShortDescriptions>
</Descriptions>
<DisplayAttributes>
<DisplayAttribute name="approveCol" type="checkbox" actionRef="1" hAlign="CENTER">
<Descriptions default="Approve">
<ShortDescriptions>
<Description Language="no" Description="Godkjenn"/>
</ShortDescriptions>
</Descriptions>
</DisplayAttribute>
<DisplayAttribute name="reviseCol" type="checkbox" actionRef="2" hAlign="CENTER">
<Descriptions default="Revise">
<ShortDescriptions>
<Description Language="no" Description="Returner"/>
</ShortDescriptions>
</Descriptions>
</DisplayAttribute>
</DisplayAttributes>
<Actions>
<Action name="submitUserDecisions" userDecision="no" handler="UIActionHandler" referenceBundle="submit"/>
<Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
<Properties>
<Property name="type" value="button"/>
<Property name="onClick" value="onForceRefresh"/>
</Properties>
</Action>
</Actions>
</View>
<View name="TimeApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.SAP_R3_HumanResources_TS40007901" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate" sortby="priority:descend, dueDate:ascend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="top" referenceBundle="tasks">
<Descriptions default="Time Approval">
<ShortDescriptions>
<Description Language="no" Description="Godkjenning Tid"/>
</ShortDescriptions>
</Descriptions>
<Actions>
<Action name="submitUserDecisions" userDecision="no" handler="UIActionHandler" referenceBundle="submit"/>
<Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
<Properties>
<Property name="type" value="button"/>
<Property name="onClick" value="onForceRefresh"/>
</Properties>
</Action>
</Actions>
</View>
</Views>
</UWLConfiguration> -
How to hide a list from SharePoint tree view pro grammatically.
Hi,
I have enabled tree view for a SharePoint 2013 site pro grammatically.
I want hide some specific lists from that tree view like Documents, Workflow, Task List, Calender
Lists which are created default when we create a site.
How could i do that?I know how to hide Quick launch and Enable Tree view with properties in C#.
My question is
hide some specific lists from that tree view like Documents,
Workflow, Task List, Calender
Lists which are created default when we create a site. -
Hi, I've purchased a few films from itunes (and they are listed as Purchased in my account), but I can't find them on my computer or my itunes account, and itunes wants me to pay for them again. How do I get around this? I've tried all the suggestions, and it's hugely frustrating.
If you are in the UK, and the film studio allows re-downloading, and you are signed in with the same account that you bought them with, then they might show under the Purchased link under Quinklinks on the right-hand side of the iTunes store home page for re-downloading - if they don't show then check to see if they are hidden (hiding and unhiding).
But you should be keeping and maintaining your own backup of your downloads and noy rely on being able to re-download any item as they are occasionally removed from the store by the content provider (film studio, tv company, record company etc).
Maybe you are looking for
-
Hi, There are the POs(Purchase Orders) which do not appear in the report against the POs that do. One common difference between the POs that show in the report from the Pos that do not show is the processing status of the POs that are held in BW in o
-
Exception Message for Lower Level
Hi everyone... I get this message: "Exception Message for Lower Level" after of one MD02, for my FERT Material. This FERT material has 2 lower levels, for a couple HALBs material in the next level and other HALB material into the level 3. I don't get
-
Updating a Sequence To Reflect in Other Sequences
I taped an interview on 2 camera's. I use my Sony FX1 HDV camera for my main HQ audio and 2nd camera, while I use the other camera, Canon 7D, for my First Camera. Then I sync up the Audio in Final Cut. This weekend I wanted to edit, but I didn't have
-
I have just set up a kodak 7.1 printer on our home wifi system, our Mac works fine but how do set up my iPad2 to print using the same wifi system, both the ipad @ printer are on the same system. Thanks for your help Judith
-
Any help would be appreciated!