LMS - Add Discovered Devices to a Group

Hi Netpro
i have created 5 UDG (Ex CampusA - to- CampusE and five different discovery jobs based on the user defined group,
Also i have created a discovery job and added to the UDG CampusA  ( Subnet 172.16.16.0) in order to see only devices in campusA , but the LMS Discover  all our devices in the organasations!!!!
what rong i have done to let LMS  sees all Devices
thanks
jamil

I hope you see the filter on the UDG determents what devices are in that group.
It is not the discovery job that puts the devices in a UDG.
Although you can place the newly discovered devices in a group in 4.1 or higher but after the next discovery this changes.
You can have multiple discoveries for different subnets. You can when you create the discovery job tell it to filter on an IP range.
The steps of the discovery are modules, community string(s), filter and global settings.
In the filter part you can say what to include or exclude and so limit the discovery to that range..
Cheers,
Michel

Similar Messages

  • LMS 4.2 Device Discovering issue

    HI All
    I have experience in LMS 3.2 and my company asked me to install and LMS 4.2. I have all documents about LMS 4.2 but it is taking time to read and doing as per document. I started discovery but the problem is last two days it is running and finds 50 % of devices only and still the staus is running. The Network topology is 2 CORE switch ( Discovered) , connecto to 2 Distribute switch and Server form switch ( Discovered) Access Switches are connected to the Distribute switch some are Discovered most of not found. Some Access switches are connected to neighbor Access Switches it is not directly connected to Distribued Switch.
    Please advise normally how long will take for discovering 70-80 devices ? How to trouble shoot for non discovering devices ?
    Thanks and Regards,
    Abdul Hameed.

    If a device is missing or isn't added, it could be due to incorrect credentials. However you still can add it manually from DCR.
    You can use the Adding Devices to add devices, device properties or attributes, and device credentials to the Device and Credential Admin.
    Go to the CiscoWorks home page and select Inventory > Device Administration > Add / Import / Manage Devices.
    For more details on how to add devices, please check :
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/inventory/mng_device.html#wp1172685
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • A number of discovered devices is not displayed in some discovery jobs in LMS 3.1

    Hello,
    the customer uses LMS 3.1 on Solaris. He tried to get the detail information about discovery jobs, but the most discovery jobs don't show information about the number of discovered, devices, reachable devices.... I'm sending you the screenshot of the job browser - all discovery jobs are succeeded, one screenshot (217.bmp) of the discovery job with correct detail information and the last screenshot (109.bmp) with failed detail information. Do you know a solution about this issue? Thank you.
    Roman

    Hi Roman,
    I have LMS 3.2 on Windows however it must be the same,  from the Home screen click on CS on the top bar, under Job Information Status click on the job number and you should then get the information you need.  I have attached what I see from my run last night.
    Cheers,
    David.

  • LMS 3.2 - Can't add new devices to RME 4.3.0

    Hello,
    since some days I get the error message
    Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!No bean specified
    if I want to add new devices to the RME.
    The last change I did was to update the device packages directly over cisco.com.
    But I can't tell if the problem persists since the update or not...
    Thanks for any advice!
    Sven

    Hi,
    thanks for the reply!
    I checked it once again.
    If I want to add the 2960S device to RME I will get this failure message:
         Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!Cannot find bean  dcrdeviceTable in scope null
    The other message "Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!No bean specified" is a little bit strange...
    Today I will get this if I want to add some other devices together with the 2960S device.
    I think that I didn't mark the 2960S yesterday....but I can't be 100% sure.
    It looks like that the problem is this unknown device.
    Is there a package for this 2960S device or what can I do to get it in RME?
    Thanks a lot!
    Sven

  • OVM 3.0.3 - cannot add new server to VLAN group with bonded VLANs

    I have a new OVS 3.0.3 server built with 2 bonded interfaces and a single VLAN running on top for the management interface. It gets discovered fine by OVM Manager (I'm running Version: 3.0.3.126, Build: 20111214_126)
    I am trying to add it to a VLAN group with two VLANs -- the existing management VLAN (ID=300) plus one other (ID=301). (I already have one identical server assigned to the VLAN group, with both VLAN interfaces configured and running fine.) This works OK, and I can see VLAN 301 for the new server in Oracle VM Manager with no IP address assigned to it.
    However, when I try to apply an IP address to the VLAN (via Hardware / Resources / VLAN Groups / Edit VLAN Group / Configure IP Addresses / VLAN Interfaces) it fails with this error:
    Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: whyovmprd02 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 ovs_br_config start 0004fb0010be2df bond0.301, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['/etc/xen/scripts/ovs-network-bridge', 'start', 'bridge=0004fb0010be2df', 'netdev=bond0.301'] failed (1): stderr: ovs-network-bridge Start: No such device bond0.301
    Oracle VM Manager seems to be expecting the subinterface for VLAN 301 to exist on the server already - which it doesn't of course, because the server has just been built, so it only has its management interface VLAN in place (VLAN ID 300)
    I have managed to work around this by removing VLAN segment 301 from the VLAN group completely, then adding it back in with the IP addresses for both servers in place. This seems to convince Oracle VM Manager that it needs to create the bond0.301 subinterface before it configures it. However, I obviously had to shut down all VMs to do this, and it was really messy as VLAN 301 is the storage network, so my original server lost contact with the NFS storage for a while which caused it to fence etc.
    There must be another way??! Any pointers would be very much appreciated.

    Avi Miller wrote:
    It's fixed in 3.1. In the meantime, if you can remove and reapply the Virtual Machine role on that network, it'll recreate the bridges for you.Thanks for replying Avi. (I won't ask you for a release date for 3.1 :))
    I did try that initially, but it didn't seem to help - I got this error back:
    Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: whyovmprd02 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 ovs_if_meta bond0.301 ethernet:0004fb00100a35f{why-be-301}:STORAGE, Status: org.apache.xmlrpc.XmlRpcException: exceptions.Exception:ovs_set_metadata: interface /sys/class/net/bond0.301 does not exists
    This appears to be from ovs_if_meta in /opt/ovs-agent-3.0/OVSVMNetConfig.py, which looks to be where the agent tries to write out the new roles for the network into the metadata file - it seems to be expecting the VLAN to exist already, and specifically checks in /sys to make sure that it is there.
    Should / could I add a step to my kickstart build to force the 301 VLAN to be created maybe? This would bring it into line with the other VLAN that is used for management, which is of course sitting there ready and waiting as soon as the server is built.

  • How can I add a contact to a group on my iPad Air or IPhone 6?

    I'm away from my computer for a while and was trying to add a contact to a group on my iPad/iPhone. I don't want to download another app to handle this simple task. All my mobile devices are up-to-date and have plenty of memory. I tried logging into iCloud on a non-Safari browser but the contact list wouldn't download so I could work on it. Did I miss a link somewhere inside of the Contact edit where I could just add to a group? Thanks for any help you can give me.

    You are not doing anything wrong. The feature that you need is totally lacking in the built in Mail app on the iPad.
    There are a couple of third party mail apps that will let you do this ... MailShot and Group Email with Attachments. You can check them out in the App Store.

  • LMS 3.2 - CampusManager-Reports -- dynamic Grouping

    Hi all,
    equal to thread https://supportforums.cisco.com/thread/2058453?tstart=0 I discovered
    problems with dynamic updates of Device Selectors "All Devices".
    With scheduling daily discrepancy reports for Error-Disabled Port newly added devices in DCR and ANI-DB will not
    participate in the scheduled report.
    Please find attached screenshot for settings.
    As within CM-Device Selector no Group Selector (solution for similar thread about rme) is available
    it would be intresting for me to know whether this is a well-known problem or if there's a workaround available.
    Thanks for your help
    Lothar

    Hi Joe,
    any news regarding the Bug?
    In Bug Toolkit the regarding Bug-ID cannot be viewed
    CSCtl78562            Bug Details
    We apologize, but the information contained within  bug ID CSCtl78562 is currently under review for publishing on Bug  Toolkit.  The information will be available soon
    Thanks for any update
    Lothar

  • How do I add multiple contacts to a group?

    How do I add multiple contacts to a group on my Ipad?

    See if this thread helps.
    https://discussions.apple.com/thread/4114588
    Matt

  • I made my own apple id because my family was getting my texts from other people. I want to add my device to my dads find my iphone app on his icloud but can't figure out how, without having to log in to his apple id on my phone. how do i add my device?

    I made my own Apple ID because when I was logged into my dad's my family was receiving my texts from other people. I want to add my device to my dad's "find my iphone" app but without signing into his Apple ID on my phone because that was causing them to get my texts. I was told by Apple I could add my device to his by signing into icloud.com but there is no option that I can find to add my device. And I don't want to log back in to his.. Any ideas???

    Also when I apply the safety copy it only imports the app the phones have had in common, so none of the apps that only the iPhone 4 had doesn't come in, only the ones I and the iPhone 4 has had in common. So you say the only way I can use the Apple ID to download on the old iPhone 4 is if I delete the apps that are in the phone and then download them again? How will that change the ID to download/update from. Won't it still have mine to update/download from?

  • How do I add a device to Find my iphone

    I cant find out how to add a device to the find my iphone app and need to

    Setup Find My iPhone
    iCloud: Set up Find My iPhone

  • Windows 8 Add a Device not finding all of my IP printers

    Hello all.  My organization is migrating to Windows 8. We currently use IP printers in our offices (24 locations total). Currently, in XP, we have a customized powershell script that allows users to locate a printer and install it.  In windows
    8, we'd like users to be able to click Add a Device.... scan the network, see their printer, and install it.  Im testing this on a subnet in the main office with a few test machines running Windows 8.  
    The problem is, when i click Add a Device, only 3 printers show up (there should be a dozen or so).  I have tried to compare the settings on the printers that show up to those that do not, but i dont see any differences.  I have tweaked the settings
    on several of the printers with no affect.  We have a few different models, HP 4345 all-in-ones, 4700 color laserjets, 4300 laserjets, and 4515 laserjets.  We also have some Xerox 9203 and 5790 models.  Only the Xerox 9203 and HP 4515 printers
    show up.
    I have tried using some of the settings discussed here: 
    http://social.technet.microsoft.com/Forums/windows/en-US/58d7ca0e-f7f9-4a2b-937a-929d393ccf0a/windows-7-computers-cant-find-hp-printers-on-network?forum=w7itpronetworking  
    but still nothing.  Hoping someone else has some experience with this type of thing and can point me in the right direction.
    Thanks

    Hi,
    Considering that the issue is caused by network issue.
    Please firs try to ping the IP of the printer which doesn't display.
    If it fails, we can see that the printer is not configured correctly on the network, please reset it again.
    If we can ping the printer IP successfully, please try if we can install the printer via the UNC address: \\host\computerIP.
    If your device has a wireless switch, make sure it’s turned on. The switch could be on the front, back, or side, and it could be small and unmarked. Check the info that came with your device to see if a picture shows where it’s located.
    Post back the testing results.
    Kate Li
    TechNet Community Support

  • How to ADD Materialized Views to Refresh Group

    Hi,
    My requirement is, i want to refresh MVs(fast refresh only) by using DBMS_SCHEDULER. For this i have created one DBMS_SCHEDULER job like below.
    BEGIN
    DBMS_SCHEDULER.CREATE_JOB (
    JOB_NAME      => 'REFRESH_MV_UPLOAD',
    JOB_TYPE           => 'PLSQL_BLOCK',
    JOB_ACTION      => 'DBMS_REFRESH.REFRESH('MV_UPLOAD_GRP');',
    REPEAT_INTERVAL      => 'FREQ=MINUTELY; INTERVAL=30',
    ENABLED      => TRUE
    END;
    In the above script, i created one refresh group 'MV_UPLOAD_GRP'. So what my requirement is i want to ADD my MVs refresh scripts to this group. Scripts as below...
    Refresh MV Scripts:
    1) Exec dbms_mview.refresh('emp.entity', 'f');
    2) Exec dbms_mview.refresh('emp.identifier', 'f');
    3) Exec dbms_mview.refresh('emp.rating_hist', 'f');
    . so on.
    Can anyboy help me how to add these scripts to refresh group 'MV_UPLOAD_GRP'.
    Regards
    Raj

    ALL_REFRESH and ALL_REFRESH_CHILDREN
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarsnapviews.htm#REPMA027
    Nicolas.

  • How do you "Add a Device" from the iOS remote app multiple times?

    Anyone know a way to trigger the "Add a device" feature in the iOS remote app after you've already added one?
    I have multiple Apple TVs scattered around the house and multiple people who would like to use them.  I have home sharing set up through my Apple ID so this works great for me.  For everyone else, I'd rather not sign my account in on their devices, even if its just for home sharing.  They can "Add a device" in the remote app to connect to one of the Apple TVs, but only one. 
    I'm using iOS 8, iPhone 5s and 6, Apple TVs 2nd and 3rd Gen

    I would rather not sign my account into other people's devices.
    As I mentioned, I already have my own devices signed into home sharing.
    Alternatively, is there a way to get an Apple TV attached to multiple home sharing accounts?
    If there is, I could have each of the people in my household set up home sharing on their own accounts.

  • HT2589 I already have 2 devices on one apple ID account and want to add apple TV.  How do I add another device on an existing apple ID account so that I can download movies from the cloud to any of 3 devices?

    how do I add another device on to my apple ID account so that I can download movies etc.. from my icloud to any of the 3 devices on the account?   I already have my iphone and ipad on the account and for some reason my 3rd device (apple TV) dropped off.   If you can help, greatly appreciated!!

    Hello there, HannaGriffin.
    Since the Apple TV (1st Generation) is the only one that has storage, I would recommend the following Knowledge Base articles for troubleshooting issues with authorization:
    Apple TV (1st generation) may not play content purchased from the iTunes Store
    http://support.apple.com/kb/ts1359
    or
    Apple TV (1st generation): Apple TV repeatedly asks for password to play iTunes Store rentals or purchases
    http://support.apple.com/kb/ts2845
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How do I add a device to my Apple ID

    I have 5 devices that I want to share my ID for iTunes store purchases.
    Currently only 2 share my Apple ID in the iTunes store.
    How do I add the 3 other devices?

    Thanks for your prompt response.
    The link that you provided " Manage your associated devices in iTunes." tells me how to remove a device.  It does not tell me how to add a device.  The Manage Devices page of View Account shows 2 devices attached, my desktop PC and my iPad Mini.  I have 3 other devices to attach: my iPhone; my wife's iPhone; and my wife's iPad Mini.  How do I do this?

Maybe you are looking for