Loaded data amount into cube and data monitor amount

Hi,
when I load data into the cube the inserted data amount in the administrator section shows 650000 data sets. The monitor of that request shows a lot of data packages. When I sum the data packages, the sum is about 700000 data sets.
Where is the difference coming from?
Thanks!

Hi ,
   If it is a full load to the cube , all the records are updated in it since in a cube data can be overwritten.
   If it is a delta load and u want to see why the difference occurs between the records transferred and added in cube ,
   u can go to the manage tab in dso , go to the contents tab ,there click change log button at the below , check the number of entries in that table , the number of entries are the added records in cube since only these records are the new records other records with the same key are already present in the cube.

Similar Messages

  • Report to display (actuals data from one cube and plan from another)

    Hi Gurus,
             I have a requirement in reporting to display actual data from one cube and plan data from a different one.
            The example below might give a clear picture of the requirement.
    rows has key figures and columns = months
    Jan |  Feb |  Mar |  Apr |  May |  Jun  ...   ....
    GrossSales
    Net Sales   
    Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
    Similarly when i run the report next month(may), 
    then (data for Jan, Feb, Mar, Apr  from CUBE1)
    and ( May thru Dec from CUBE2)
    Any suggestions.
    Thanks in Advance
    Kumar

    Hi Henry,
         We alreadey have a multi provider which includes
    FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
    So you suggest that we have two versions of key figure for actual and plan.
    ie. each KF will have two versions.
    actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
    Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
    eg:
    Jan | Feb | Mar | Apr | May | Jun ...
    GrossSales(Act)
    GrossSlaes(Plan)
    Net Sales(Acutal)
    Net Sales(Plan)
    Correct me if I am wrong.
    the report has a lot of key figures, having two versions for each kf will be confusing.
    the user would like to see
    Jan.....| ...Feb  |..Mar |..Apr.....|  May  | 
    GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
    Net Sales
    where Act.Value is from CUBE1
             Plan Value is from CUBE2
    Thanks
    Kumar

  • How to convert a data set into a xml data and vice versa

    i am new to oracle with xml..
    my aim is to convert a data set into a xml data and vice versa..
    my work is as follows...
    my query:
    select rggpk,rggcode,rggname from ms_regiongeo
    to convert a data set into a xml*
    select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual;
    (this works fine and output of this query is as follows..)
    <ROWSET>
    <ROW>
      <RGGPK>201</RGGPK>
      <RGGCODE>Asia</RGGCODE>
      <RGGNAME>Asia</RGGNAME>
    </ROW>
    <ROW>
      <RGGPK>1</RGGPK>
      <RGGCODE>OTH</RGGCODE>
      <RGGNAME>Others</RGGNAME>
    </ROW>
    <ROW>
      <RGGPK>21</RGGPK>
      <RGGCODE>COB</RGGCODE>
      <RGGNAME>Africa and Yemen</RGGNAME>
    </ROW>
    <ROW>
      <RGGPK>2</RGGPK>
      <RGGCODE>AUS</RGGCODE>
      <RGGNAME>Australia</RGGNAME>
    </ROW>
    <ROW>
      <RGGPK>23</RGGPK>
      <RGGCODE>IND</RGGCODE>
      <RGGNAME>Indian Sub Continent</RGGNAME>
    </ROW>
    <ROW>
      <RGGPK>24</RGGPK>
      <RGGCODE>TVM</RGGCODE>
      <RGGNAME>North America</RGGNAME>
    </ROW>
    </ROWSET>
    and to reverse this process, I tried a query like this..*
    select EXTRACTVALUE (XML_DATA,'ROWSET/ROW/RGGPK') as EMP_ID
    from(
            select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual
    )tab1but failed.. and raised with an eror: ORA-19025
    help me..
    regards,
    john

    Hi-
    my aim is to convert a data set into a xml data  You can refer to the below posts
    Adding namespace to XML output
    Re: how to convert table data in xml format based on the xsd.

  • Load MD attr into cube

    Hi,
    1) I have one master data 0PROJ into cube but never loaded. its attr of 0wbselement and loaded in MD.
    I tried to add in update rule following code
    data:    begin of i_wbs occurs 0,
                                    0PROJ like /bi0/mwbs_elemt-PS_PRJTYPE,
             end of i_wbs.
    should it load 0PROJ directly when i load cube ? but how  coz i dont get any data into that field.
    Thanks,
    Edited by: Keral Smith on Feb 20, 2009 11:16 PM

    Hi guys,
    Thanks for your input.
    you ask for more detail - here it is,
    I have 0REC_NETWORK inthe cube. which comes from 0CA_TS_IS_1 extract structure. that table has the field POSID. its mapped properly in transfer rules also.
    But not populated in cube neither its gets populated in RSA3 when i test extractor.
    that means 0rec_network doesnt get records from even R/3 !!
    I have 0PS_PRJTYPE -as a attribute of 0rec_network. since network doesnt have any data i m not able to get any data into 0ps_prjtype.
    does it require changes into extractor ?
    0ps_prjtype is been there as attr. into 0wbselement. But 0wbselement is not there into infocube. Can i get 0ps_prjtype populated from wbs element by changing into update rules ?
    suggest any good way for that please.
    Thanks,
    KS

  • How to read a data file combining strings and data

    Hello,
    I'm having a data file combining strings and datas to read. I'm trying to read the filename, time, constants and comments into four seperate string indicators (the lines for the comments varies for different files). And read the data into a 2-D numeric array. How can I do this? Is there any function that can serch special characters in the spreadsheet file so I can exactly locate where I should start reading the specific data. The following is how the data file appears. Thank you very much.
    Best,
    Richard
    filename.dat
    14:59:00 12/31/2009
    Sample = 2451
    Frequency = 300, Wait time = 2500
    Temperature = 20
    some comments
    some comments
    some comments
    some comments
    some comments
    7.0000E+2    1.5810E-5
    7.0050E+2    1.5400E-5
    7.0100E+2    1.5500E-5
    7.0150E+2    1.5180E-5
    Message Edited by Richard1017 on 10-02-2009 03:10 PM
    Solved!
    Go to Solution.

    Hi,
         I'm fairly new to the NI forums too and I think you just have to wait longer.  Your post was done right.  I do a similiar function as to what you are talking about except I read in numbers from a file.  I create an ini file (just a notepad file of type *.ini) that is is set up with sections inside brackets [] and keys with whatever name followed by an = sign.  You may be able to use a *.dat file too, I just haven't.  Then the vi attached goes to that file and reads the keys from those sections.  You just repeat for the different sections and keys you want to read.  You can use similar provide VI's to write to that same file or create it.  Let me know how that works. 
    Attachments:
    Help1.ini ‏1 KB
    Help1.vi ‏10 KB

  • I want to upgrade my storage plan in icloud. Before that i want to know whether synchronization of data in my PC and data in one of the applications of ipad is possible through icloud or not

    I want to upgrade my storage plan in icloud. Before that i want to know whether synchronization of data in my PC and data in one of the applications like "phone drive" of ipad is possible through icloud or not?

    The Photos app doesn't currently support subfolders, it only has the one level of folder/album. You will either need to change your folder structure on your computer to be just one level, see if there is a third-party photo app in the store that copes with subfolders, or just make do. You can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • Data Passed into CT_DATA and written back successfully but not reflecting in cube

    Hi,
    While executing through UJKT the log show data are written back successfully but those data's are not reflecting in cube. the sample log file is attached.
    Kindly help me to resolve this issue
    why new material with signdata 0 is not updating in cube
    Regards
    Vimal Raj

    hi deepak ,
    it should be , No 'Applicable Data found' , you can change your selection input values and try again ,
    Or give appropriate selection for the query by knowing the data in the cube, use TCode LISTCUBE to view the contents and try ,
    Let me know if the issue is some thing else
    thanks,
    sathy

  • Delta load from ODS to cube failed - Data mismatch

    Hi all
    We have a scenario where the data flow is like
    R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
    The cube has an additional field called "monthly version"
    and since it is a history cube , it is supposed to hold data
    snapshots of the all data in current cube for each month .
    We are facing the problem that the Data for the current month
    is there in the history ODS but not in the cube . In the ODS ->Manage->requests
    tab i can see only 1 red request that too with 0 recs.
    However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
    with the current month date. Could these red requests be the reason for
    data mismatch in ODS and cube .
    Please guide as to how can i solve this problem .
    thanks all
    annie

    Hi
    Thanks for the reply.
    Load to Cube is Delta and goes daily .
    Load to ODS is a full on daily basis .
    Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
    Thanks
    annie

  • URGENT: Data discrepency for Cube and ODS 0fi_ar_4

    Hi all,
    I am having problems for ODS 0fiar_o03 and Cube 0fiar_c03...
    They have been initialised a year  back and delta was running almost correctly since then. ..some sometime in August they started showing discrepency from standard R/3 code FBL5N.
    The cube and ODs are having exact data till 31/07.2006  .
    I tried to delete all data in Cube and ODs by selective deletion of fiscal periods 005.2006 to 008.2006 and reload again from R/3..but still data not matching. Why is that so?
    Please suggest steps to correct it. Will assign points.

    Dear Andy,
    First tell us that how can you say that data is inconsistent? I mean on what criteria you consolidate data.
    Secondly have you checked in R3 that after 31.07.2006 was there any change or anything new (company code or smthing) added.
    My suggestion would be;
    First:
    1. Go to RSA3 (in R3) and check that are you able to see(pull) the data you want.
    2. Now check wheather it is coming in BW or not?
    3. If coming then manually update cube through data mart.
    Second:
    1. if not able to get data through standard extractor then try to load by flat file. (last option)
    2. check wheather deltas after your repair full upload are giving you correct deltas or not? if not then re-initialize and reshedule deltas.
    Hope it helps, do revert.

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • To save the data rs232 into binary and to post them on a graph

    Hello I finish this year a project of electronic to present in front of jury. I would like to show the assets of the Labview software by carrying out the interface of my project under this program. I have to work before with this software and an auxiliary chart to make regulation speed engine and regulation of heating. This time I would need to use the serial port .I have a serial port connected to a  CPLD+mémory SRAM. This assembly will send data by serial port . The PC must take delivery of the data in binary format and separate each one of the bit ====>first I recept the first word of 8 bits; the first bit is posted on a line the second bit on one second line etc.... (thus 8lignes) and when I recept the following word of 8 bit I carry out the same thing. In the final analysis I must find 8 lines posting a value 0 or 1 as on a logical analyzer. I hope that you will be able to help me. Thank you and sorry for my bad english.

    Hi
    If I translate your question into my (also foreign) english I would say that you receive bytes from the serial line in the form of characters
    and that each bit is representing the state of a digital line.
    So you need to read characters from the serial line 1 at a time, convert this into a byte and this one into 8 bits and display it.
    Try to find all these steps and the forum will help you to add them together.
    succes
    greetings from the Netherlands

  • Input needed for writing data back into BW/ECC data

    Hello Everyone,
    Can anyone please let me know an example or process you have used for writing data back into BW (DSO/Cubes) or ECC systems.
    We do not have integrated planning in our current system configuration currently.
    So, any sample code for using any of the BAPI/RFC for writing data would be appreciated.
    Also, I am trying to find out if there is any way to schedule the models developed in VC 7.1 in background to automate certain type of data processing which goes across multiple systems.
    Any help would be appreciated.
    Thanks.

    Hello,
    Can anyone please help me out on this one....
    I am aware of few BAPI's such as RSDRI_ODSO_INSERT_RFC but I am not aware of what action has to be used to transfer the data from the table within VC to this BAPI and how to define the parameters as the one's available for the BAPI I mentioned do not fit into the data I have in the table within VC.
    The following are the columns I have in the table within VC,
    1. GL Account
    2. Credit Amount
    3. Debit Amount
    4. Sales Amount
    I have defined the DSO with the same where G/L Account is the keyfield and the rest being data fields.
    Any help would be really appreciated.
    Thanks.

  • Failed loading from PSA into Cube

    Hello,
    I tried to load data from flat file into a cube. I defined the processing as PSA only in Infopackage, the loading was OK, but when I loaded data from PSA to cube, it failed. I checked the PSA, the Status indicator was red, this record is the first record in flat file. The detail error message as follow:
    TYPE: Red
    Message: Value "01.02.20" of characteristic 0Date is not a number with spaces
    ID: BRAIN
    NO.: 19
    LTxt:
    One record in flat file as this:
    M-01;GP-01;1000;01.01.2006;2006;K4;20
    the corresponded infoobjects:
    Material;material group;customer;calend day;fiscal year;fiscal year variant;quantity
    I was confused much on the error message, I checked flat file, infosource, transfer and update rules,cube and so on. Could you please help me to solve the problem? thanks advaned!
    Ryan

    Hi,
    0DATE has to be available in internal date fomat to book into the infocube. you have the following options:
    -Change the 0DATE-column in your flatfile to the format YYYYMMDD.
    -In the transfer structure, choose a conversion routine to convert the external date format to internal date format.
    Regards,
    Beat

  • Inconsistent data in PSA table and Data source

    Dear Experts,
    I am using Process chain to update info cube from data source of a z table. In the process chain, the Delete PSA request step is having the PSA table number of the correct data source. The info package and the DTP also have the correct data source.
    But after executing the process chain, the PSA table is updated with the wrong data source.
    I have checked the Extraction of the data source in RSA3 transaction. The records are matching to the correct data source. But when I check PSA contents through process monitor in process chain log for DTP, I found the PSA content data is inconsistent and getting the data from wrong data source.
    If process chain is repeated once again, the PSA is updated with the right data source.
    Also when I do the process chain steps manually, it is working well.
    Thanks and regards
    Murugesan

    Hi,
    Looks strange but you can do the following check,
    Go to your data source and from the PSA table check which infopackage is loading data. You should be able to see that data is getting loaded from same infopackage. If there are multiple infopackages involved means you could get different data.
    Regards,
    Durgehs.

  • How to convert server specific date string into client specific date object

    Hi developers,
    I have a very complex issue to convert the server date string format "EEE MMM dd HH:mm:ss z yyyy" into java.util.Date object and find the difference of the client machine date to represent the elapsed time
    The problem is the server time zone and client time zone are not unique and when I try to covert the server date which is in string format to date format using SimpleDateFormat class , I got the server time as 3:30 hours appended to it. The server time zone is in IST and Client time zone format is GMT+5:30 , the appended time of 3:30 hours created the confusion in calculating the elapsed time between the server started time and client requested time
    I went through all the sites but none of them were useful
    If any help to solve the above issue is appriciated
    please send the response with the same subject line
    Advance Thanks

    Why don't you just subtract from the server time the 3:30 hours (consult api of java.util.date) before comparing with the client date? Hard to see where's the problem...

Maybe you are looking for