Loading Alias from EBS to planning through erp integrator

Hi all,
Can anybody tell me how to load the member properties from EBS to Hyperion Planning using ERP integrator. My trial only loaded the members with few default properties.
My planning application is classic. And i used mapping type as "single segment". Didnt find any detailed options there to define the member properties.
Thanks

Hello,
I do not believe storage type is available.
The Alias is based on the languages you have defined when you setup your applications inside of ERPi. Not all "aliases" will come over; and only the basic information is actually stored as a description. I would suggest you review the ERPi Admin guide for your release.
Please review the documentation completely and ensure you understand it. The most current documentation can be found at the following URL.
http://download.oracle.com/docs/cd/E17236_01/epm.1112/erpi_admin.pdf
Information retrieved from the source can be found on Page 31.
Information about aliases can be found on Page 34.
Thank you,

Similar Messages

Loading data from Cube to Planning area

Hi,
If I am loading data from a cube to a planning area using transaction TSCUBE,
does the system load data into planning area for the combinations that exist in the cube or does it load for all CVCs?
For example,
I have my CVC as Plant, Material, Customer
If there are 4 CVCs in the POS that were previously generated as
Plant--Material--Customer
01--M1--
C1
01--M2--
C3
01--M2--
C2
01--M4--
C5
If the cube has data like this:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
(doesnot have the last combination), then if I use TSCUBE transaction to load data to Planning area from this cube,
is the data loaded as
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
Only for the 3 combinations that exist in the cube and not load anything for the last one
OR
is the data loaded as
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
01--M4C5--
0
Load all 4 combinations and send 0 as the cube doesnot have this combination?
Hope I am clear on this question.
Thanks.

Thanks a lot Vinod, Srinivas and Harish. The reason why I am asking you is that we have a scenario where we get this situation.
We initially get data from R/3 to BW to APO like the below:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
Later when the customer is changed or bought out by somebody C1 is changed to C2. Some times when the business doesnot know who the customer is initially they just put C1 as dummy and then after sometime replace it by C2. Then the new record coming in is as follows:
Plant--MaterialCustomer----Qty.
01--M1C2--
10
BW can identify changes in transaction data but not in Master data. What I mean by this is when Qty. 10 changes from 10 to 20, the system can identify it in deltas.
If the customer (master data) changes to C2 from C1, the system thinks it's a new record all together then if I use delta loads, it gets me the following:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M1C2--
10
If I am looking at Plant and Material Level, my data is doubled.
So we are planning to do a full load that works like this:
1. Initial data like the below:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
The CVC is created and the planning area has Qty.10
Then we delete the contents of cube and do a full load into the cube with changed customer
Plant--MaterialCustomer----Qty.
01--M1C2--
10
This time a new CVC is created. Then we have another 10 loaded into Planning area.
If the system loads all CVCs, then the it would send
Plant--MaterialCustomer----Qty.
01--M1C1--
0
01--M1C1--
10
If the system loads only combinations in cube,
then it loads
Plant--MaterialCustomer----Qty.
01--M1C2--
10
But the system already has another 10 for Customer C1 duplicating the values.
We are trouble in the second case.
We had to go fr this solution instead of realignment as our business has no way pf knowing that C1 was replaced by C2.
Hope I am clear.

Loading metadata from Essbase to Planning.

Hi,
I want to know what are the methods to load metadata into planning from essbase cube. I tried outline extractor to make a csv file, then I've used ODI to reverse the file and create a datasource. Then I reversed the planning application, created the interface and mapped the dimensions. I have more dimensions in planning target than the file datasource and when I execute the interface I always having some problem.
Do i need to create a sql table from the csv file and then reversed and map it to planning? Is there an easy way I can load the members without using ODI?
Thanks in advance,
-Hussain

Hi John,
I have tried the essbase to planning series. There were no errors in the operator but I dont see any members in planning after database refresh. I checked the log file and it says:
2010-06-01 08:56:22,494 INFO [DwgCmdExecutionThread]: Oracle Data Integrator Adapter for Hyperion Planning - Release 9.3.1.1
2010-06-01 08:56:22,494 INFO [DwgCmdExecutionThread]: Connecting to planning application [PLAN1] on [bms-pc]:[11333] using username [admin].
2010-06-01 08:56:22,644 INFO [DwgCmdExecutionThread]: Successfully connected to the planning application.
2010-06-01 08:56:22,654 INFO [DwgCmdExecutionThread]: The load options for the planning load are
     Dimension Name: Account Sort Parent Child : true
     Load Order By Input : false
     Refresh Database : false
2010-06-01 08:56:22,694 INFO [DwgCmdExecutionThread]: Begining the load process.
2010-06-01 08:56:22,704 DEBUG [DwgCmdExecutionThread]: **Number of columns in the source result set does not match the number of planning target columns.**
2010-06-01 08:56:22,714 INFO [DwgCmdExecutionThread]: Load type is [Load dimension member].
2010-06-01 08:56:22,714 INFO [DwgCmdExecutionThread]: Load process completed.
The number of columns in the source result set does not match the number of target colums. I have more columns in planning than temp table.
Thanks,
Hussain

Loading data from cube to Planning Area - Error

I have two cubes. one has history data and other ratios.
the forecast is dis aggregated based on that ratios.
first the ratio data is getting loaded and gets populated.
when i try to load the history data, a error says, CVC not maintained.
there are totally 6 Char used in this Config.
MPOS is created using the ratio cube and has the same char as in history cube, additionally one more sub family.
Can some one help me in this.??
Thanks !!!

hi
char in hist cube
mkt fam
mkt seg
regn
gobl
cntry
Char in the MPOS(from Ratio cube)
mkt fam
mkt seg
regn
gobl
cntry
sub family
the main obj of not including it in hist cube, i forecast @ mktfam level n dis aggre to sub family.
if i include the sub family also in hist cube, then i can forecast @ sub family itself..
the whole dis agg. logic does not serve the purpose.
On the Adjustment of Time series, will try it n revert n back.
like can you please tell me how it affects the process???? or the logic behind doing this????
Thanks!!!
Edited by: Aswath ram on Sep 10, 2008 6:33 PM

Error while loading data from PSA to Infoobject through DTP(URGENT)

Hi-
I am running into an issue while loading the data from PSA to Infoobject.
It says
Data Package 1 : error during processing.
Updating Attributes for Infoobject
Error in substep
Process Terminated
Please let me know ur solution as this is very urgent....

Data Package 1 : error during processing.
This is the error when your flat file is opened at the time of scheduling. Pls close your flat file, will upload correctly.
Let me know if you have any further query.

How to load data from EBS PA to Primavera?

Hi Experts
I am the beginner of Primavera. Could you please let me know how to load EBS(12.2.2) PA data to Primavera (8.3)? I heard the PIP and AIA can do it, am I right? If I'm right, please introduce some materials for this, thanks.

No one knows?

Loading Data from Excel to Essbase through ODI 11G

Hi All,
i am getting below error when i click execute in ODI . In Excel Data store i had click reverse engineer its working fine
-3100 : 37000 : java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error (missing operator) in query expression '[Account]   C1_ACCOUNT''
java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error (missing operator) in query expression '[Account]    C1_ACCOUNT''
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
at $Proxy2.prepareStatement(Unknown Source)
Thanks

Hi,
after fixing the error with the PRE_LOAD_MAXL_SCRIPT parameter I right away figured out another problem.
On data load I get the following exception: java.sql.SQLException: Unexpected token: ACCOUNT in statement [select   C1_ACCOUNT    ""Account] ...
The SQL source and the Essbase target data store have the same columns, I have mapped them accordingly. As Staging area I use the Sunopsis Memory Engine. The exception is raised in Step '6 - Integration - SQL_TO_ESSBASE_DATA - Load data into essbase'.
I have also tried a File source instead of the SQL source - same result.
Any ideas?
Many thanks and best regards,
Peter

Loading Data From a Text File Through an Application into Oracle

Hi There,
I have a web application that allows the user to upload a text file. This file is then processed by my application. Each line in the file is a new row I need to insert into my table.
Currently, I batch 200 updates together and insert them into the DB.
For about 3 million records this is taking much longer than I would like it to.
Any suggestions for optimization?
thanks.

I put here a simplest demo (file has whitespace)
I think it may help to start.
--Structure of your file test1.dat (put in your directory)
a1 b1
a2 b2
a3 b3
a4 b4
CREATE OR REPLACE DIRECTORY
test_dir AS
'C:\oraclexe\DIR' --or anywhere
--GRANT READ, WRITE ON DIRECTORY test_dir TO your_user
--external table:
DROP TABLE test_ext
CREATE     TABLE test_ext
   (col1      CHAR(5),
    col2      CHAR(5)
ORGANIZATION EXTERNAL
   (TYPE oracle_loader
    DEFAULT DIRECTORY test_dir
    ACCESS PARAMETERS
      (RECORDS DELIMITED BY NEWLINE
       FIELDS TERMINATED BY WHITESPACE)
       LOCATION ('test1.dat')
SELECT * FROM test_ext
COL1 COL2
a1    b1
a2    b2
a3    b3
a4    b4
Insert into another_table(another_col1, another_col2) (select col1, col2 from test_ext) if needed

ERP INTEGRATOR and FDM

Hi All
We have new requirement our Source is PeopleSoft from that we want to load data to essbase and planning using ERP Integrator
Previously we use to get text files from Peoplesoft and we use to load it FDM to Planing & Essbase
What are prerequisites to connect to Peoplesoft -> ERP Integrator -> FDM
Do we require ODI to connect to Peoplesoft ?
Can anyone explain me the flow
Thanks,

Hi Tom
We are using
1. Hyperion 11.1.2.2 Essbase ,Planning and FDM
2.ODI 11g
3.Now we want to Connect to Peoplesoft using ODI -> ERPi -> FDM ->Essbase and Planning
One is connecting ERPi & FDM through the use of the appropriate adapter, and additional metadata information.
If possible can u explain the above clearly
Thanks

Loading Metadata from planning to oracle table

Hi
I am trying to load one dimension metadata from planning to oracle table.we are on 10.1.3
i selected LKM SQL to SQL to load from source to staging area and IKM SQL to SQL append to load from staging to Target.
I got the below error
0 : null : java.sql.SQLException: Driver must be specified
java.sql.SQLException: Driver must be specified
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.t(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Please suggest..
Thanks,

Hi John
Thank you for the response
i am trying to load accounts back to oracle table.
My plan is to load existing accounts in planning to a oracle table i.e PLANACNT,so when i load new accounts from oracle to planning through ODI , i can say in the source filter that load Table.column not in (select accounts from PLANACNT).
Please suggest if there is any better method for this...my plan is to load new accounts created in oracle to planning by comparing the accounts in planning.
Thanks,

Load from cube to planning area

Hi,
We are facing a problem in loading data from Cube to planning area, we need to distinguish between the Zero and the blank values in planning area when loading data from cube to planning area.
Scenario is like this.
For a CVC u2013A on day D I am having key figure value as blank and on D1 is Zero and on D2 is 2, I want the same to appear as my planning area data If I load this data to cube my day D value will appear as Zero (but it was blank) and on D1 Zero and on D2 as 2 in cube.
I am using Std T-code /SAPAPAO/TSCUBE to load data from cube to planning area, in std T-code we are having option of ignore Zero, if I use this it will also stops the actual zero value(which I need) on day D+1 to come in to planning area which I donu2019t want.
I want my planning area data to be as blank on day D and Zero on D1 and 2 on D2 after loading data from cube to planning area..
Can any one put some light and help me out from this issue.
With regards,
Sreerama

Hi Seerama,
I am not sure to understand completely the issue: do you have an issue in the cube or in the planning area?
In order to differentiate a blank for a zero in the planning area, you need to set the flag "zero allowed" in the planning area settings. (in the tab keyfigure, click details, then for each key figure you can select or not the flag "zero allowed")
When you load the data, you should indeed not flag "ignore zero value"
If the issue you have is in your cube (between the file and the cube) then it is another matter...
Kind Regards,
Julien

Unable to see IKM Hyperion to Planning when loading metadata from File/Tabl

Hello,
I am unable to view the IKM SQL to Hyperion Planning Knowledge Module in the flow tab. I reverse engineered the KM and I see the KM in my Project(Have only 1 project). I am trying to load metadata from file to planning and selected staging area different from target. I was able to reverse engineer the planning cube successfully to ODI Models.
ODI Version: 11.1.1.6.3
Planning Version: 11.1.2.2
Any help will be appreciated.
-Kash

932916 wrote:
Hello,
I am unable to view the IKM SQL to Hyperion Planning Knowledge Module in the flow tab. I reverse engineered the KM and I see the KM in my Project(Have only 1 project). I am trying to load metadata from file to planning and selected staging area different from target. I was able to reverse engineer the planning cube successfully to ODI Models.
What is your staging area pointing to ? Make sure it is pointing to a RDBMS schema or SUNOPSIS MEMORY
ODI Version: 11.1.1.6.3
Planning Version: 11.1.2.2
Any help will be appreciated.
-Kash

Unable to load data from FDMEE staging table to HFM tables

Hi,
We have installed EPM 11.1.2.3 with all latest related products (ODI/FDMEE) in our development environment
We are inprocess of loading data from EBS R12 to HFM using ERPI (Data Managemwnt in EPM 11.1.2.3). We could Import and validate the data but when we try to Export the data to HFM, the process continuously running hours (neither it gives any error nor it completes).
When we check the process details in ODI work repository, following processes are completed successfully
COMM_LOAD_BALANCES - Running .........(From past 1 day, still running)
EBS_GL_LOAD_BALANCES_DATA - Successful
COMM_LOAD_BALANCES - Successful
Whereas we could load data in staging table of FDMEE database schema and moreover we are even able to drill through to source system (EBS R12) from Data load workbench but not able to load the data into HFM application.
Log details from the process are below.
2013-11-05 17:04:59,747 INFO [AIF]: FDMEE Process Start, Process ID: 31
2013-11-05 17:04:59,747 INFO [AIF]: FDMEE Logging Level: 4
2013-11-05 17:04:59,748 INFO [AIF]: FDMEE Log File: C:\FDMEE\outbox\logs\OASIS_31.log
2013-11-05 17:04:59,748 INFO [AIF]: User:admin
2013-11-05 17:04:59,748 INFO [AIF]: Location:VisionLoc (Partitionkey:1)
2013-11-05 17:04:59,749 INFO [AIF]: Period Name:JAN (Period Key:1/1/12 12:00 AM)
2013-11-05 17:04:59,749 INFO [AIF]: Category Name:VisionCat (Category key:3)
2013-11-05 17:04:59,749 INFO [AIF]: Rule Name:VisionRule (Rule ID:2)
2013-11-05 17:05:00,844 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Oracle JRockit(R) (Oracle Corporation)]
2013-11-05 17:05:00,844 INFO [AIF]: Java Platform: java1.6.0_37
2013-11-05 17:05:02,910 INFO [AIF]: -------START IMPORT STEP-------
2013-11-05 17:05:02,953 INFO [AIF]: -------END IMPORT STEP-------
2013-11-05 17:05:03,030 INFO [AIF]: -------START EXPORT STEP-------
2013-11-05 17:05:03,108 INFO [AIF]:
Move Data for Period 'JAN'
Any help on above is much appreciated.
Thank you
Regards
Praneeth

Hi,
I have followed the steps 1 & 2 above. Noe the log shows something like below
2013-11-05 09:47:31,179 INFO [AIF]: FDMEE Process Start, Process ID: 22
2013-11-05 09:47:31,179 INFO [AIF]: FDMEE Logging Level: 4
2013-11-05 09:47:31,179 INFO [AIF]: FDMEE Log File: C:\FDMEE\outbox\logs\OASIS_22.log
2013-11-05 09:47:31,180 INFO [AIF]: User:admin
2013-11-05 09:47:31,180 INFO [AIF]: Location:VisionLoc (Partitionkey:1)
2013-11-05 09:47:31,180 INFO [AIF]: Period Name:JAN (Period Key:1/1/12 12:00 AM)
2013-11-05 09:47:31,180 INFO [AIF]: Category Name:VisionCat (Category key:3)
2013-11-05 09:47:31,181 INFO [AIF]: Rule Name:VisionRule (Rule ID:2)
2013-11-05 09:47:32,378 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Oracle JRockit(R) (Oracle Corporation)]
2013-11-05 09:47:32,378 INFO [AIF]: Java Platform: java1.6.0_37
2013-11-05 09:47:34,652 INFO [AIF]: -------START IMPORT STEP-------
2013-11-05 09:47:34,698 INFO [AIF]: -------END IMPORT STEP-------
2013-11-05 09:47:34,744 INFO [AIF]: -------START EXPORT STEP-------
2013-11-05 09:47:34,828 INFO [AIF]:
Move Data for Period 'JAN'
2013-11-08 11:49:10,478 INFO [AIF]: FDMEE Process Start, Process ID: 22
2013-11-08 11:49:10,493 INFO [AIF]: FDMEE Logging Level: 5
2013-11-08 11:49:10,493 INFO [AIF]: FDMEE Log File: C:\FDMEE\outbox\logs\OASIS_22.log
2013-11-08 11:49:10,494 INFO [AIF]: User:admin
2013-11-08 11:49:10,494 INFO [AIF]: Location:VISIONLOC (Partitionkey:1)
2013-11-08 11:49:10,494 INFO [AIF]: Period Name:JAN (Period Key:1/1/12 12:00 AM)
2013-11-08 11:49:10,495 INFO [AIF]: Category Name:VISIONCAT (Category key:1)
2013-11-08 11:49:10,495 INFO [AIF]: Rule Name:VISIONRULE (Rule ID:1)
2013-11-08 11:49:11,903 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Oracle JRockit(R) (Oracle Corporation)]
2013-11-08 11:49:11,909 INFO [AIF]: Java Platform: java1.6.0_37
2013-11-08 11:49:14,037 INFO [AIF]: -------START IMPORT STEP-------
2013-11-08 11:49:14,105 INFO [AIF]: -------END IMPORT STEP-------
2013-11-08 11:49:14,152 INFO [AIF]: -------START EXPORT STEP-------
2013-11-08 11:49:14,178 DEBUG [AIF]: CommData.exportData - START
2013-11-08 11:49:14,183 DEBUG [AIF]: CommData.getRuleInfo - START
2013-11-08 11:49:14,188 DEBUG [AIF]:
        SELECT brl.RULE_ID
        ,br.RULE_NAME
        ,brl.PARTITIONKEY
        ,brl.CATKEY
        ,part.PARTVALGROUP
        ,br.SOURCE_SYSTEM_ID
        ,ss.SOURCE_SYSTEM_TYPE
        ,CASE
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'EBS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'PS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FUSION%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FILE%' THEN 'N'
          ELSE 'Y'
        END SOURCE_ADAPTER_FLAG
        ,app.APPLICATION_ID
        ,app.TARGET_APPLICATION_NAME
        ,app.TARGET_APPLICATION_TYPE
        ,app.DATA_LOAD_METHOD
        ,brl.PLAN_TYPE
        ,CASE brl.PLAN_TYPE
          WHEN 'PLAN1' THEN 1
          WHEN 'PLAN2' THEN 2
          WHEN 'PLAN3' THEN 3
          WHEN 'PLAN4' THEN 4
          WHEN 'PLAN5' THEN 5
          ELSE 0
        END PLAN_NUMBER
        ,br.INCL_ZERO_BALANCE_FLAG
        ,br.PERIOD_MAPPING_TYPE
        ,br.INCLUDE_ADJ_PERIODS_FLAG
        ,br.BALANCE_TYPE ACTUAL_FLAG
        ,br.AMOUNT_TYPE
        ,br.BALANCE_SELECTION
        ,br.BALANCE_METHOD_CODE
        ,COALESCE(br.SIGNAGE_METHOD, 'ABSOLUTE') SIGNAGE_METHOD
        ,br.CURRENCY_CODE
        ,br.BAL_SEG_VALUE_OPTION_CODE
        ,brl.EXECUTION_MODE
        ,COALESCE(brl.IMPORT_FROM_SOURCE_FLAG, 'Y') IMPORT_FROM_SOURCE_FLAG
        ,COALESCE(brl.RECALCULATE_FLAG, 'N') RECALCULATE_FLAG
        ,COALESCE(brl.EXPORT_TO_TARGET_FLAG, 'N') EXPORT_TO_TARGET_FLAG
        ,CASE
          WHEN (br.LEDGER_GROUP_ID IS NOT NULL) THEN 'MULTI'
          WHEN (br.SOURCE_LEDGER_ID IS NOT NULL) THEN 'SINGLE'
          ELSE 'NONE'
        END LEDGER_GROUP_CODE
        ,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
        ,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
        ,br.LEDGER_GROUP
        ,(SELECT brd.DETAIL_CODE
          FROM AIF_BAL_RULE_DETAILS brd
          WHERE brd.RULE_ID = br.RULE_ID
          AND brd.DETAIL_TYPE = 'LEDGER'
        ) PS_LEDGER
        ,CASE lg.LEDGER_TEMPLATE
          WHEN 'COMMITMENT' THEN 'Y'
          ELSE 'N'
        END KK_FLAG
        ,p.LAST_UPDATED_BY
        ,p.AIF_WEB_SERVICE_URL WEB_SERVICE_URL
        ,p.EPM_ORACLE_INSTANCE
        FROM AIF_PROCESSES p
        INNER JOIN AIF_BAL_RULE_LOADS brl
          ON brl.LOADID = p.PROCESS_ID
        INNER JOIN AIF_BALANCE_RULES br
          ON br.RULE_ID = brl.RULE_ID
        INNER JOIN AIF_SOURCE_SYSTEMS ss
          ON ss.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
        INNER JOIN AIF_TARGET_APPLICATIONS app
          ON app.APPLICATION_ID = brl.APPLICATION_ID
        INNER JOIN TPOVPARTITION part
          ON part.PARTITIONKEY = br.PARTITIONKEY
        INNER JOIN TBHVIMPGROUP imp
          ON imp.IMPGROUPKEY = part.PARTIMPGROUP
        LEFT OUTER JOIN AIF_COA_LEDGERS l
          ON l.SOURCE_SYSTEM_ID = p.SOURCE_SYSTEM_ID
          AND l.SOURCE_LEDGER_ID = COALESCE(br.SOURCE_LEDGER_ID,imp.IMPSOURCELEDGERID)
        LEFT OUTER JOIN AIF_PS_SET_CNTRL_REC_STG scr
          ON scr.SOURCE_SYSTEM_ID = l.SOURCE_SYSTEM_ID
          AND scr.SETCNTRLVALUE = l.SOURCE_LEDGER_NAME
          AND scr.RECNAME = 'LED_GRP_TBL'
        LEFT OUTER JOIN AIF_PS_LED_GRP_TBL_STG lg
          ON lg.SOURCE_SYSTEM_ID = scr.SOURCE_SYSTEM_ID
          AND lg.SETID = scr.SETID
          AND lg.LEDGER_GROUP = br.LEDGER_GROUP
        WHERE p.PROCESS_ID = 22
2013-11-08 11:49:14,195 DEBUG [AIF]:
      SELECT adim.BALANCE_COLUMN_NAME DIMNAME
      ,adim.DIMENSION_ID
      ,dim.TARGET_DIMENSION_CLASS_NAME
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
      ) COA_SEGMENT_NAME1
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
      ) COA_SEGMENT_NAME2
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
      ) COA_SEGMENT_NAME3
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
      ) COA_SEGMENT_NAME4
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
      ) COA_SEGMENT_NAME5
      ,(SELECT CASE mdd.ORPHAN_OPTION_CODE
          WHEN 'CHILD' THEN 'N'
          WHEN 'ROOT' THEN 'N'
          ELSE 'Y'
        END DIMENSION_FILTER_FLAG
        FROM AIF_MAP_DIM_DETAILS_V mdd
        ,AIF_MAPPING_RULES mr
        WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
        AND mdd.RULE_ID = mr.RULE_ID
        AND mdd.DIMENSION_ID = adim.DIMENSION_ID
      ) DIMENSION_FILTER_FLAG
      ,tiie.IMPCONCATCHAR
      FROM TPOVPARTITION tpp
      INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
        ON adim.APPLICATION_ID = 2
      INNER JOIN AIF_DIMENSIONS dim
        ON dim.DIMENSION_ID = adim.DIMENSION_ID
      LEFT OUTER JOIN TBHVIMPITEMERPI tiie
        ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
        AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
        AND tiie.IMPMAPTYPE = 'ERP'
      WHERE tpp.PARTITIONKEY = 1
      AND adim.BALANCE_COLUMN_NAME IS NOT NULL
      ORDER BY adim.BALANCE_COLUMN_NAME
2013-11-08 11:49:14,197 DEBUG [AIF]: {'APPLICATION_ID': 2L, 'IMPORT_FROM_SOURCE_FLAG': u'N', 'PLAN_TYPE': None, 'RULE_NAME': u'VISIONRULE', 'ACTUAL_FLAG': u'A', 'IS_INCREMENTAL_LOAD': False, 'EPM_ORACLE_INSTANCE': u'C:\\Oracle\\Middleware\\user_projects\\epmsystem1', 'CATKEY': 1L, 'BAL_SEG_VALUE_OPTION_CODE': u'ALL', 'INCLUDE_ADJ_PERIODS_FLAG': u'N', 'PERIOD_MAPPING_TYPE': u'EXPLICIT', 'SOURCE_SYSTEM_TYPE': u'EBS_R12', 'LEDGER_GROUP': None, 'TARGET_APPLICATION_NAME': u'OASIS', 'RECALCULATE_FLAG': u'N', 'SOURCE_SYSTEM_ID': 2L, 'TEMP_DATA_TABLE_NAME': 'TDATASEG_T', 'KK_FLAG': u'N', 'AMOUNT_TYPE': u'MONETARY', 'EXPORT_TO_TARGET_FLAG': u'Y', 'DATA_TABLE_NAME': 'TDATASEG', 'DIMNAME_LIST': [u'ACCOUNT', u'ENTITY', u'ICP', u'UD1', u'UD2', u'UD3', u'UD4'], 'TDATAMAPTYPE': 'ERP', 'LAST_UPDATED_BY': u'admin', 'DIMNAME_MAP': {u'UD3': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT5', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD3', 'DIMENSION_ID': 9L}, u'ICP': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'ICP', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT7', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ICP', 'DIMENSION_ID': 8L}, u'ENTITY': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Entity', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT1', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ENTITY', 'DIMENSION_ID': 12L}, u'UD2': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT4', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD2', 'DIMENSION_ID': 11L}, u'UD4': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT6', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD4', 'DIMENSION_ID': 1L}, u'ACCOUNT': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Account', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT3', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ACCOUNT', 'DIMENSION_ID': 10L}, u'UD1': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT2', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD1', 'DIMENSION_ID': 7L}}, 'TARGET_APPLICATION_TYPE': u'HFM', 'PARTITIONKEY': 1L, 'PARTVALGROUP': u'[NONE]', 'LEDGER_GROUP_CODE': u'SINGLE', 'INCLUDE_ZERO_BALANCE_FLAG': u'N', 'EXECUTION_MODE': u'SNAPSHOT', 'PLAN_NUMBER': 0L, 'PS_LEDGER': None, 'BALANCE_SELECTION': u'FUNCTIONAL', 'BALANCE_AMOUNT_IS': u'PERIODIC', 'RULE_ID': 1L, 'BALANCE_AMOUNT_BS': u'YTD', 'CURRENCY_CODE': None, 'SOURCE_ADAPTER_FLAG': u'N', 'BALANCE_METHOD_CODE': u'STANDARD', 'SIGNAGE_METHOD': u'SAME', 'WEB_SERVICE_URL': u'http://localhost:9000/aif', 'DATA_LOAD_METHOD': u'CLASSIC_VIA_EPMI'}
2013-11-08 11:49:14,197 DEBUG [AIF]: CommData.getRuleInfo - END
2013-11-08 11:49:14,224 DEBUG [AIF]: CommData.insertPeriods - START
2013-11-08 11:49:14,228 DEBUG [AIF]: CommData.getLedgerListAndMap - START
2013-11-08 11:49:14,229 DEBUG [AIF]: CommData.getLedgerSQL - START
2013-11-08 11:49:14,229 DEBUG [AIF]: CommData.getLedgerSQL - END
2013-11-08 11:49:14,229 DEBUG [AIF]:
          SELECT l.SOURCE_LEDGER_ID
          ,l.SOURCE_LEDGER_NAME
          ,l.SOURCE_COA_ID
          ,l.CALENDAR_ID
          ,'0' SETID
          ,l.PERIOD_TYPE
          ,NULL LEDGER_TABLE_NAME
          FROM AIF_BALANCE_RULES br
          ,AIF_COA_LEDGERS l
          WHERE br.RULE_ID = 1
          AND l.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
          AND l.SOURCE_LEDGER_ID = br.SOURCE_LEDGER_ID
2013-11-08 11:49:14,230 DEBUG [AIF]: CommData.getLedgerListAndMap - END
2013-11-08 11:49:14,232 DEBUG [AIF]:
        INSERT INTO AIF_PROCESS_PERIODS (
          PROCESS_ID
          ,PERIODKEY
          ,PERIOD_ID
          ,ADJUSTMENT_PERIOD_FLAG
          ,GL_PERIOD_YEAR
          ,GL_PERIOD_NUM
          ,GL_PERIOD_NAME
          ,GL_PERIOD_CODE
          ,GL_EFFECTIVE_PERIOD_NUM
          ,YEARTARGET
          ,PERIODTARGET
          ,IMP_ENTITY_TYPE
          ,IMP_ENTITY_ID
          ,IMP_ENTITY_NAME
          ,TRANS_ENTITY_TYPE
          ,TRANS_ENTITY_ID
          ,TRANS_ENTITY_NAME
          ,PRIOR_PERIOD_FLAG
          ,SOURCE_LEDGER_ID
                SELECT DISTINCT brl.LOADID PROCESS_ID
                ,pp.PERIODKEY PERIODKEY
                ,prd.PERIOD_ID
                ,COALESCE(prd.ADJUSTMENT_PERIOD_FLAG, 'N') ADJUSTMENT_PERIOD_FLAG
                ,COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) GL_PERIOD_YEAR
                ,COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0) GL_PERIOD_NUM
                ,COALESCE(prd.PERIOD_NAME, ppsrc.GL_PERIOD_NAME,'0') GL_PERIOD_NAME
                ,COALESCE(prd.PERIOD_CODE, CAST(COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0) AS VARCHAR(38)),'0') GL_PERIOD_CODE
                ,(COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0)) GL_EFFECTIVE_PERIOD_NUM
                ,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
                ,COALESCE(ppa.PERIODTARGET, pp.PERIODTARGET) PERIODTARGET
                ,'PROCESS_BAL_IMP' IMP_ENTITY_TYPE
                ,(COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0)) IMP_ENTITY_ID
                ,COALESCE(prd.PERIOD_NAME, ppsrc.GL_PERIOD_NAME,'0') IMP_ENTITY_NAME
                ,'PROCESS_BAL_TRANS' TRANS_ENTITY_TYPE
                ,(COALESCE(prd.YEAR, ppsrc.GL_PERIOD_YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM, ppsrc.GL_PERIOD_NUM,0)) TRANS_ENTITY_ID
                ,pp.PERIODDESC TRANS_ENTITY_NAME
                ,'N' PRIOR_PERIOD_FLAG
                ,2202 SOURCE_LEDGER_ID
                FROM (
                  AIF_BAL_RULE_LOADS brl
                  INNER JOIN TPOVCATEGORY pc
                    ON pc.CATKEY = brl.CATKEY
                  INNER JOIN TPOVPERIOD_FLAT_V pp
                    ON pp.PERIODFREQ = pc.CATFREQ
                    AND pp.PERIODKEY >= brl.START_PERIODKEY
                    AND pp.PERIODKEY <= brl.END_PERIODKEY
                  LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
                    ON ppa.PERIODKEY = pp.PERIODKEY
                    AND ppa.PERIODFREQ = pp.PERIODFREQ
                    AND ppa.INTSYSTEMKEY = 'OASIS'
                INNER JOIN TPOVPERIODSOURCE ppsrc
                  ON ppsrc.PERIODKEY = pp.PERIODKEY
                  AND ppsrc.MAPPING_TYPE = 'EXPLICIT'
                  AND ppsrc.SOURCE_SYSTEM_ID = 2
                  AND ppsrc.CALENDAR_ID IN ('29067')
                LEFT OUTER JOIN AIF_GL_PERIODS_STG prd
                  ON prd.PERIOD_ID = ppsrc.PERIOD_ID
                  AND prd.SOURCE_SYSTEM_ID = ppsrc.SOURCE_SYSTEM_ID
                  AND prd.CALENDAR_ID = ppsrc.CALENDAR_ID
          AND prd.SETID = '0'
          AND prd.PERIOD_TYPE = '507'
                  AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
                WHERE brl.LOADID = 22
                ORDER BY pp.PERIODKEY
                ,GL_EFFECTIVE_PERIOD_NUM
2013-11-08 11:49:14,235 DEBUG [AIF]: CommData.insertPeriods - END
2013-11-08 11:49:14,240 DEBUG [AIF]: CommData.moveData - START
2013-11-08 11:49:14,242 DEBUG [AIF]: CommData.getPovList - START
2013-11-08 11:49:14,242 DEBUG [AIF]:
        SELECT PARTITIONKEY
        ,PARTNAME
        ,CATKEY
        ,CATNAME
        ,PERIODKEY
        ,COALESCE(PERIODDESC, TO_CHAR(PERIODKEY,'YYYY-MM-DD HH24:MI:SS')) PERIODDESC
        ,RULE_ID
        ,RULE_NAME
        FROM (
          SELECT DISTINCT brl.PARTITIONKEY
          ,part.PARTNAME
          ,brl.CATKEY
          ,cat.CATNAME
          ,pprd.PERIODKEY
          ,pp.PERIODDESC
          ,brl.RULE_ID
          ,br.RULE_NAME
          FROM AIF_BAL_RULE_LOADS brl
          INNER JOIN AIF_BALANCE_RULES br
            ON br.RULE_ID = brl.RULE_ID
          INNER JOIN TPOVPARTITION part
            ON part.PARTITIONKEY = brl.PARTITIONKEY
          INNER JOIN TPOVCATEGORY cat
            ON cat.CATKEY = brl.CATKEY
          INNER JOIN AIF_PROCESS_PERIODS pprd
            ON pprd.PROCESS_ID = brl.LOADID
          LEFT OUTER JOIN TPOVPERIOD pp
            ON pp.PERIODKEY = pprd.PERIODKEY
          WHERE brl.LOADID = 22
        ) q
        ORDER BY PARTITIONKEY
        ,CATKEY
        ,PERIODKEY
        ,RULE_ID
2013-11-08 11:49:14,244 DEBUG [AIF]: CommData.getPovList - END
2013-11-08 11:49:14,245 INFO [AIF]:
Move Data for Period 'JAN'
2013-11-08 11:49:14,246 DEBUG [AIF]:
          UPDATE TDATASEG
          SET LOADID = 22
          WHERE PARTITIONKEY = 1
          AND CATKEY = 1
          AND RULE_ID = 1
          AND LOADID < 22
            AND PERIODKEY = '2012-01-01'
2013-11-08 11:49:14,320 DEBUG [AIF]: Number of Rows updated on TDATASEG: 1842
2013-11-08 11:49:14,320 DEBUG [AIF]:
        INSERT INTO AIF_APPL_LOAD_AUDIT (
          LOADID
          ,TARGET_APPLICATION_TYPE
          ,TARGET_APPLICATION_NAME
          ,PLAN_TYPE
          ,SOURCE_LEDGER_ID
          ,EPM_YEAR
          ,EPM_PERIOD
          ,SNAPSHOT_FLAG
          ,SEGMENT_FILTER_FLAG
          ,PARTITIONKEY
          ,CATKEY
          ,RULE_ID
          ,PERIODKEY
          ,EXPORT_TO_TARGET_FLAG
        SELECT DISTINCT 22
        ,TARGET_APPLICATION_TYPE
        ,TARGET_APPLICATION_NAME
        ,PLAN_TYPE
        ,SOURCE_LEDGER_ID
        ,EPM_YEAR
        ,EPM_PERIOD
        ,SNAPSHOT_FLAG
        ,SEGMENT_FILTER_FLAG
        ,PARTITIONKEY
        ,CATKEY
        ,RULE_ID
        ,PERIODKEY
        ,'N'
        FROM AIF_APPL_LOAD_AUDIT
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND RULE_ID = 1
        AND LOADID < 22
            AND PERIODKEY = '2012-01-01'
2013-11-08 11:49:14,321 DEBUG [AIF]: Number of Rows inserted into AIF_APPL_LOAD_AUDIT: 1
2013-11-08 11:49:14,322 DEBUG [AIF]:
        INSERT INTO AIF_APPL_LOAD_PRD_AUDIT (
          LOADID
          ,GL_PERIOD_ID
          ,GL_PERIOD_YEAR
          ,DELTA_RUN_ID
          ,PARTITIONKEY
          ,CATKEY
          ,RULE_ID
          ,PERIODKEY
        SELECT DISTINCT 22
        ,GL_PERIOD_ID
        ,GL_PERIOD_YEAR
        ,DELTA_RUN_ID
        ,PARTITIONKEY
        ,CATKEY
        ,RULE_ID
        ,PERIODKEY
        FROM AIF_APPL_LOAD_PRD_AUDIT
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND RULE_ID = 1
        AND LOADID < 22
            AND PERIODKEY = '2012-01-01'
2013-11-08 11:49:14,323 DEBUG [AIF]: Number of Rows inserted into AIF_APPL_LOAD_PRD_AUDIT: 1
2013-11-08 11:49:14,325 DEBUG [AIF]: CommData.moveData - END
2013-11-08 11:49:14,332 DEBUG [AIF]: CommData.updateWorkflow - START
2013-11-08 11:49:14,332 DEBUG [AIF]:
    SELECT tlp.PROCESSSTATUS
    ,tlps.PROCESSSTATUSDESC
    ,CASE WHEN (tlp.INTLOCKSTATE = 60) THEN 'Y' ELSE 'N' END LOCK_FLAG
    FROM TLOGPROCESS tlp
    ,TLOGPROCESSSTATES tlps
    WHERE tlp.PARTITIONKEY = 1
    AND tlp.CATKEY = 1
    AND tlp.PERIODKEY = '2012-01-01'
    AND tlp.RULE_ID = 1
    AND tlps.PROCESSSTATUSKEY = tlp.PROCESSSTATUS
2013-11-08 11:49:14,336 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 20
          ,PROCESSEXP = 0
          ,PROCESSENTLOAD = 0
          ,PROCESSENTVAL = 0
          ,PROCESSEXPNOTE = NULL
          ,PROCESSENTLOADNOTE = NULL
          ,PROCESSENTVALNOTE = NULL
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,338 DEBUG [AIF]: CommData.updateWorkflow - END
2013-11-08 11:49:14,339 DEBUG [AIF]: CommData.purgeInvalidRecordsTDATASEG - START
2013-11-08 11:49:14,341 DEBUG [AIF]:
        DELETE FROM TDATASEG
        WHERE LOADID = 22
          AND (
        PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
        AND VALID_FLAG = 'N'
2013-11-08 11:49:14,342 DEBUG [AIF]: Number of Rows deleted from TDATASEG: 0
2013-11-08 11:49:14,342 DEBUG [AIF]: CommData.purgeInvalidRecordsTDATASEG - END
2013-11-08 11:49:14,344 DEBUG [AIF]: CommData.updateAppLoadAudit - START
2013-11-08 11:49:14,344 DEBUG [AIF]:
        UPDATE AIF_APPL_LOAD_AUDIT
        SET EXPORT_TO_TARGET_FLAG = 'Y'
        WHERE LOADID = 22
        AND PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY= '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,345 DEBUG [AIF]: Number of Rows updated on AIF_APPL_LOAD_AUDIT: 1
2013-11-08 11:49:14,345 DEBUG [AIF]: CommData.updateAppLoadAudit - END
2013-11-08 11:49:14,345 DEBUG [AIF]: CommData.updateWorkflow - START
2013-11-08 11:49:14,346 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 21
          ,PROCESSEXP = 1
          ,PROCESSEXPNOTE = 'Export Successful'
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,347 DEBUG [AIF]: CommData.updateWorkflow - END
2013-11-08 11:49:14,347 DEBUG [AIF]: CommData.exportData - END
2013-11-08 11:49:14,404 DEBUG [AIF]: HfmData.loadData - START
2013-11-08 11:49:14,404 DEBUG [AIF]: CommData.getRuleInfo - START
2013-11-08 11:49:14,404 DEBUG [AIF]:
        SELECT brl.RULE_ID
        ,br.RULE_NAME
        ,brl.PARTITIONKEY
        ,brl.CATKEY
        ,part.PARTVALGROUP
        ,br.SOURCE_SYSTEM_ID
        ,ss.SOURCE_SYSTEM_TYPE
        ,CASE
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'EBS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'PS%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FUSION%' THEN 'N'
          WHEN ss.SOURCE_SYSTEM_TYPE LIKE 'FILE%' THEN 'N'
          ELSE 'Y'
        END SOURCE_ADAPTER_FLAG
        ,app.APPLICATION_ID
        ,app.TARGET_APPLICATION_NAME
        ,app.TARGET_APPLICATION_TYPE
        ,app.DATA_LOAD_METHOD
        ,brl.PLAN_TYPE
        ,CASE brl.PLAN_TYPE
          WHEN 'PLAN1' THEN 1
          WHEN 'PLAN2' THEN 2
          WHEN 'PLAN3' THEN 3
          WHEN 'PLAN4' THEN 4
          WHEN 'PLAN5' THEN 5
          ELSE 0
        END PLAN_NUMBER
        ,br.INCL_ZERO_BALANCE_FLAG
        ,br.PERIOD_MAPPING_TYPE
        ,br.INCLUDE_ADJ_PERIODS_FLAG
        ,br.BALANCE_TYPE ACTUAL_FLAG
        ,br.AMOUNT_TYPE
        ,br.BALANCE_SELECTION
        ,br.BALANCE_METHOD_CODE
        ,COALESCE(br.SIGNAGE_METHOD, 'ABSOLUTE') SIGNAGE_METHOD
        ,br.CURRENCY_CODE
        ,br.BAL_SEG_VALUE_OPTION_CODE
        ,brl.EXECUTION_MODE
        ,COALESCE(brl.IMPORT_FROM_SOURCE_FLAG, 'Y') IMPORT_FROM_SOURCE_FLAG
        ,COALESCE(brl.RECALCULATE_FLAG, 'N') RECALCULATE_FLAG
        ,COALESCE(brl.EXPORT_TO_TARGET_FLAG, 'N') EXPORT_TO_TARGET_FLAG
        ,CASE
          WHEN (br.LEDGER_GROUP_ID IS NOT NULL) THEN 'MULTI'
          WHEN (br.SOURCE_LEDGER_ID IS NOT NULL) THEN 'SINGLE'
          ELSE 'NONE'
        END LEDGER_GROUP_CODE
        ,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
        ,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
        ,br.LEDGER_GROUP
        ,(SELECT brd.DETAIL_CODE
          FROM AIF_BAL_RULE_DETAILS brd
          WHERE brd.RULE_ID = br.RULE_ID
          AND brd.DETAIL_TYPE = 'LEDGER'
        ) PS_LEDGER
        ,CASE lg.LEDGER_TEMPLATE
          WHEN 'COMMITMENT' THEN 'Y'
          ELSE 'N'
        END KK_FLAG
        ,p.LAST_UPDATED_BY
        ,p.AIF_WEB_SERVICE_URL WEB_SERVICE_URL
        ,p.EPM_ORACLE_INSTANCE
        FROM AIF_PROCESSES p
        INNER JOIN AIF_BAL_RULE_LOADS brl
          ON brl.LOADID = p.PROCESS_ID
        INNER JOIN AIF_BALANCE_RULES br
          ON br.RULE_ID = brl.RULE_ID
        INNER JOIN AIF_SOURCE_SYSTEMS ss
          ON ss.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
        INNER JOIN AIF_TARGET_APPLICATIONS app
          ON app.APPLICATION_ID = brl.APPLICATION_ID
        INNER JOIN TPOVPARTITION part
          ON part.PARTITIONKEY = br.PARTITIONKEY
        INNER JOIN TBHVIMPGROUP imp
          ON imp.IMPGROUPKEY = part.PARTIMPGROUP
        LEFT OUTER JOIN AIF_COA_LEDGERS l
          ON l.SOURCE_SYSTEM_ID = p.SOURCE_SYSTEM_ID
          AND l.SOURCE_LEDGER_ID = COALESCE(br.SOURCE_LEDGER_ID,imp.IMPSOURCELEDGERID)
        LEFT OUTER JOIN AIF_PS_SET_CNTRL_REC_STG scr
          ON scr.SOURCE_SYSTEM_ID = l.SOURCE_SYSTEM_ID
          AND scr.SETCNTRLVALUE = l.SOURCE_LEDGER_NAME
          AND scr.RECNAME = 'LED_GRP_TBL'
        LEFT OUTER JOIN AIF_PS_LED_GRP_TBL_STG lg
          ON lg.SOURCE_SYSTEM_ID = scr.SOURCE_SYSTEM_ID
          AND lg.SETID = scr.SETID
          AND lg.LEDGER_GROUP = br.LEDGER_GROUP
        WHERE p.PROCESS_ID = 22
2013-11-08 11:49:14,406 DEBUG [AIF]:
      SELECT adim.BALANCE_COLUMN_NAME DIMNAME
      ,adim.DIMENSION_ID
      ,dim.TARGET_DIMENSION_CLASS_NAME
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
      ) COA_SEGMENT_NAME1
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
      ) COA_SEGMENT_NAME2
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
      ) COA_SEGMENT_NAME3
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
      ) COA_SEGMENT_NAME4
      ,(SELECT COA_SEGMENT_NAME
        FROM AIF_COA_SEGMENTS cs
        WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
      ) COA_SEGMENT_NAME5
      ,(SELECT CASE mdd.ORPHAN_OPTION_CODE
          WHEN 'CHILD' THEN 'N'
          WHEN 'ROOT' THEN 'N'
          ELSE 'Y'
        END DIMENSION_FILTER_FLAG
        FROM AIF_MAP_DIM_DETAILS_V mdd
        ,AIF_MAPPING_RULES mr
        WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
        AND mdd.RULE_ID = mr.RULE_ID
        AND mdd.DIMENSION_ID = adim.DIMENSION_ID
      ) DIMENSION_FILTER_FLAG
      ,tiie.IMPCONCATCHAR
      FROM TPOVPARTITION tpp
      INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
        ON adim.APPLICATION_ID = 2
      INNER JOIN AIF_DIMENSIONS dim
        ON dim.DIMENSION_ID = adim.DIMENSION_ID
      LEFT OUTER JOIN TBHVIMPITEMERPI tiie
        ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
        AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
        AND tiie.IMPMAPTYPE = 'ERP'
      WHERE tpp.PARTITIONKEY = 1
      AND adim.BALANCE_COLUMN_NAME IS NOT NULL
      ORDER BY adim.BALANCE_COLUMN_NAME
2013-11-08 11:49:14,407 DEBUG [AIF]: {'APPLICATION_ID': 2L, 'IMPORT_FROM_SOURCE_FLAG': u'N', 'PLAN_TYPE': None, 'RULE_NAME': u'VISIONRULE', 'ACTUAL_FLAG': u'A', 'IS_INCREMENTAL_LOAD': False, 'EPM_ORACLE_INSTANCE': u'C:\\Oracle\\Middleware\\user_projects\\epmsystem1', 'CATKEY': 1L, 'BAL_SEG_VALUE_OPTION_CODE': u'ALL', 'INCLUDE_ADJ_PERIODS_FLAG': u'N', 'PERIOD_MAPPING_TYPE': u'EXPLICIT', 'SOURCE_SYSTEM_TYPE': u'EBS_R12', 'LEDGER_GROUP': None, 'TARGET_APPLICATION_NAME': u'OASIS', 'RECALCULATE_FLAG': u'N', 'SOURCE_SYSTEM_ID': 2L, 'TEMP_DATA_TABLE_NAME': 'TDATASEG_T', 'KK_FLAG': u'N', 'AMOUNT_TYPE': u'MONETARY', 'EXPORT_TO_TARGET_FLAG': u'Y', 'DATA_TABLE_NAME': 'TDATASEG', 'DIMNAME_LIST': [u'ACCOUNT', u'ENTITY', u'ICP', u'UD1', u'UD2', u'UD3', u'UD4'], 'TDATAMAPTYPE': 'ERP', 'LAST_UPDATED_BY': u'admin', 'DIMNAME_MAP': {u'UD3': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT5', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD3', 'DIMENSION_ID': 9L}, u'ICP': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'ICP', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT7', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ICP', 'DIMENSION_ID': 8L}, u'ENTITY': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Entity', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT1', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ENTITY', 'DIMENSION_ID': 12L}, u'UD2': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT4', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD2', 'DIMENSION_ID': 11L}, u'UD4': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT6', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD4', 'DIMENSION_ID': 1L}, u'ACCOUNT': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Account', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT3', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'ACCOUNT', 'DIMENSION_ID': 10L}, u'UD1': {'IMPCONCATCHAR': None, 'TARGET_DIMENSION_CLASS_NAME': u'Generic', 'COA_SEGMENT_NAME5': None, 'COA_SEGMENT_NAME1': u'SEGMENT2', 'COA_SEGMENT_NAME2': None, 'COA_SEGMENT_NAME3': None, 'DIMENSION_FILTER_FLAG': None, 'COA_SEGMENT_NAME4': None, 'DIMNAME': u'UD1', 'DIMENSION_ID': 7L}}, 'TARGET_APPLICATION_TYPE': u'HFM', 'PARTITIONKEY': 1L, 'PARTVALGROUP': u'[NONE]', 'LEDGER_GROUP_CODE': u'SINGLE', 'INCLUDE_ZERO_BALANCE_FLAG': u'N', 'EXECUTION_MODE': u'SNAPSHOT', 'PLAN_NUMBER': 0L, 'PS_LEDGER': None, 'BALANCE_SELECTION': u'FUNCTIONAL', 'BALANCE_AMOUNT_IS': u'PERIODIC', 'RULE_ID': 1L, 'BALANCE_AMOUNT_BS': u'YTD', 'CURRENCY_CODE': None, 'SOURCE_ADAPTER_FLAG': u'N', 'BALANCE_METHOD_CODE': u'STANDARD', 'SIGNAGE_METHOD': u'SAME', 'WEB_SERVICE_URL': u'http://localhost:9000/aif', 'DATA_LOAD_METHOD': u'CLASSIC_VIA_EPMI'}
2013-11-08 11:49:14,407 DEBUG [AIF]: CommData.getRuleInfo - END
2013-11-08 11:49:14,407 DEBUG [AIF]: CommData.getPovList - START
2013-11-08 11:49:14,407 DEBUG [AIF]:
        SELECT PARTITIONKEY
        ,PARTNAME
        ,CATKEY
        ,CATNAME
        ,PERIODKEY
        ,COALESCE(PERIODDESC, TO_CHAR(PERIODKEY,'YYYY-MM-DD HH24:MI:SS')) PERIODDESC
        ,RULE_ID
        ,RULE_NAME
        FROM (
          SELECT DISTINCT brl.PARTITIONKEY
          ,part.PARTNAME
          ,brl.CATKEY
          ,cat.CATNAME
          ,pprd.PERIODKEY
          ,pp.PERIODDESC
          ,brl.RULE_ID
          ,br.RULE_NAME
          FROM AIF_BAL_RULE_LOADS brl
          INNER JOIN AIF_BALANCE_RULES br
            ON br.RULE_ID = brl.RULE_ID
          INNER JOIN TPOVPARTITION part
            ON part.PARTITIONKEY = brl.PARTITIONKEY
          INNER JOIN TPOVCATEGORY cat
            ON cat.CATKEY = brl.CATKEY
          INNER JOIN AIF_PROCESS_PERIODS pprd
            ON pprd.PROCESS_ID = brl.LOADID
          LEFT OUTER JOIN TPOVPERIOD pp
            ON pp.PERIODKEY = pprd.PERIODKEY
          WHERE brl.LOADID = 22
        ) q
        ORDER BY PARTITIONKEY
        ,CATKEY
        ,PERIODKEY
        ,RULE_ID
2013-11-08 11:49:14,409 DEBUG [AIF]: CommData.getPovList - END
2013-11-08 11:49:14,409 DEBUG [AIF]: CommData.updateWorkflow - START
2013-11-08 11:49:14,409 DEBUG [AIF]:
    SELECT tlp.PROCESSSTATUS
    ,tlps.PROCESSSTATUSDESC
    ,CASE WHEN (tlp.INTLOCKSTATE = 60) THEN 'Y' ELSE 'N' END LOCK_FLAG
    FROM TLOGPROCESS tlp
    ,TLOGPROCESSSTATES tlps
    WHERE tlp.PARTITIONKEY = 1
    AND tlp.CATKEY = 1
    AND tlp.PERIODKEY = '2012-01-01'
    AND tlp.RULE_ID = 1
    AND tlps.PROCESSSTATUSKEY = tlp.PROCESSSTATUS
2013-11-08 11:49:14,410 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 30
          ,PROCESSENTLOAD = 0
          ,PROCESSENTVAL = 0
          ,PROCESSENTLOADNOTE = NULL
          ,PROCESSENTVALNOTE = NULL
        WHERE PARTITIONKEY = 1
        AND CATKEY = 1
        AND PERIODKEY = '2012-01-01'
        AND RULE_ID = 1
2013-11-08 11:49:14,411 DEBUG [AIF]: CommData.updateWorkflow - END
2013-11-08 11:49:14,412 DEBUG [AIF]:
    SELECT COALESCE(usr.PROFILE_OPTION_VALUE, app.PROFILE_OPTION_VALUE, site.PROFILE_OPTION_VALUE) PROFILE_OPTION_VALUE
    FROM AIF_PROFILE_OPTIONS po
    LEFT OUTER JOIN AIF_PROFILE_OPTION_VALUES site
      ON site.PROFILE_OPTION_NAME = po.PROFILE_OPTION_NAME
      AND site.LEVEL_ID = 1000
      AND site.LEVEL_VALUE = 0
      AND site.LEVEL_ID <= po.MAX_LEVEL_ID
    LEFT OUTER JOIN AIF_PROFILE_OPTION_VALUES app
      ON app.PROFILE_OPTION_NAME = site.PROFILE_OPTION_NAME
      AND app.LEVEL_ID = 1005
      AND app.LEVEL_VALUE = NULL
      AND app.LEVEL_ID <= po.MAX_LEVEL_ID
    LEFT OUTER JOIN AIF_PROFILE_OPTION_VALUES usr
      ON usr.PROFILE_OPTION_NAME = usr.PROFILE_OPTION_NAME
      AND usr.LEVEL_ID = 1010
      AND usr.LEVEL_VALUE = NULL
      AND usr.LEVEL_ID <= po.MAX_LEVEL_ID
    WHERE po.PROFILE_OPTION_NAME = 'JAVA_HOME'
2013-11-08 11:49:14,413 DEBUG [AIF]: HFM Load command:
%EPM_ORACLE_HOME%/products/FinancialDataQuality/bin/HFM_LOAD.vbs "22" "a9E3uvSJNhkFhEQTmuUFFUElfdQgKJKHrb1EsjRsL6yZJlXsOFcVPbGWHhpOQzl9zvHoo3s%2Bdq6R4yJhp0GMNWIKMTcizp3%2F8HASkA7rVufXDWEpAKAK%2BvcFmj4zLTI3rtrKHlVEYrOLMY453J2lXk6Cy771mNSD8X114CqaWSdUKGbKTRGNpgE3BfRGlEd1wZ3cra4ee0jUbT2aTaiqSN26oVe6dyxM3zolc%2BOPkjiDNk1MqwNr43tT3JsZz4qEQGF9d39DRN3CDjUuZRPt4SEKSSL35upncRJiw2uBOtV%2FvSuGLNpZ2J79v1%2Ba1Oo9c4Xhig7SFYbE6Jwk1yXRJLTSw0DKFu%2FEpcdjpOnx%2F6YawMBNIa5iu5L637S91jT1Xd3EGmxZFq%2Bi6bHdCJAC8g%3D%3D" "C%3A%5COracle%5CMiddleware%5Cuser_projects%5Cepmsystem1" "%25EPM_ORACLE_HOME%25%2F..%2Fjdk160_35"
Is there anywhere we need to set EPM Home and also let me know what is PSU1 ?
Thanks in advance.
Praneeth

Regarding ERP Integrator

Dear All,
I have few doubts on ERP Integrator.
1) What are things required from Oracle GL to Planning for Data Loading using ERP Integrator? (Trail Balance is enough or we required some other file from Oracle GL)
2) Is there any scheduling options available for Data loading using ERP Integrator?
3) what is process for loading the data to Planning using ERP Integrator?
4) How we load the data to Planning? (i.e. monthly load, hourly load)
Is there any document is available for ERP Integrator in detail?
Anyone please guide me in this situation.
Thanks,
PC

Hi,
I think it is worth having a read of the documentation first :- http://download.oracle.com/docs/cd/E12825_01/epm.111/erpi_admin.pdf
It should answer many of the questions you are raising.
Cheers
John
http://john-goodwin.blogspot.com/

Drill Through from FDM/ERPI to Source ERP

Per my understanding, when loading data from FDM to a Target EPM system, the drill through from say HFM back to FDM would log on using your credentials via SSO. In other words, I log in as testuser in HFM and drill through, then that testuser id and password must be set up in shared services in the same manner in the epm target system as well as FDM.
Does the same hold true when you drill through from FDM/ERPI back to the Source ERP? In other words, the same ID and password must be set up in HFM, FDM, and say EBS ERP? Or is there a way to set a Global ID for the drill from FDM to the ERP?
Thank you in advance

Hello,
In the situation you have described unless the Authentication mechanism and the style of that mechanism for all the environments (in this sitaution Hyperion vs. Oracle EBS) are identical then there is no unified approach. Generally when going from Hyperion into Oracle EBS the EBS landing page is returned prompting you for valid credentials.
In order for this to work in on seemless move you would have to use OID with OSSO.
OID = Oracle Internet Directory
OSSO = Oracle Single Sign On
Thank you,

Loading Alias from EBS to planning through erp integrator

Similar Messages

Maybe you are looking for