Loading error from BI to Oracle

we are trying to connect to ABAP connector through OPEN HUB to Oracle.
a.       a function module is called when we run the extractor to load data from BI to Oracle.
b.       When the extractor is started it calls a function module.
c.       When the function module is executed it opens a dialogue box asking if the data is deleted from the table.
d.       This dialogue box is stopping us from doing a load.
I need the solution to suppress the dialogue box.
Thanks & Regards
Ramakanth.

Hi
Thanks for your reply. Following are my settings in my interface.
Source : MS SQL Server 2K. It contains a table called sampleTable with two fields empId,empName .empId is the primary key. Under the Flow tab, I have selected LKM SQL to SQL
Target: Oracle 10g . It contains a table OracleTable with two fields empId,empName. empId is the primary key. In the Flow tab, I have selected IKM Oracle Incremental Update.
When I execute the interface it said Session started. When I open Operator, I found the following error under Sessions folder.
933 : 42000 : java.sql.SQLException: ORA-00933: SQL command not properly ended
java.sql.SQLException: ORA-00933: SQL command not properly ended
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
Where Can I see the code generated from the interface. Is it a PLSQL code?
Pls help me where I am doing wrong.

Similar Messages

Migration Error from Access to Oracle through SQL Developer.

Hi,
Actually I am trying to migrate data from MS Access 2002 to Oracle 9i database through the SQL Developer. But Whenever I go to Capture Database from Access it will show me an error.... Invalid procedure Call and then it shows an error message... >>>>>>
ShowSplashScreen("_OracleSplashScreen",3)
after that i wont be able to do this task anymore..... So please help me get out of it... How Cam I Maigrate data from Access to Oracle 9i...
Is any other tool i use or you can help me for this tool to migrate date...
Please tell me..
If yu can send me a mail then mail me on [email protected]
regards,
Vishal

Hi Vishal,
I have responded to your related thread on the Migration Workbench forum - Migration Error from Access to Oracle through SQL Developer.
Regards,
Hilary

Sql loader loading data from legacy to Oracle

Hi
we have a requirement that we need to import data from legacy to oracle AR.We know that we need to put the data file in BIN folder,but I want to know about the data file source if we place in windows folder instead of BIN directory will SQL loader picks the file and loads the data.
Thanks
Y

Yes,
Refer this
http://www.oracle.com/technology/products/database/utilities/htdocs/sql_loader_overview.html
* Load data across a network. This means that a SQL*Loader client can be run on a different system from the one that is running the SQL*Loader server.
* Load data from multiple datafiles during the same load session
* Load data into multiple tables during the same load session
* Specify the character set of the data
* Selectively load data
* Load data from disk, tape, or named pipe
* Specify the character set of the data
* Generate sophisticated error reports, which greatly aid troubleshooting
* Load arbitrarily complex object-relational data
* Use either conventional or direct path loading.
-Arun

Loading Metadata from planning to oracle table

Hi
I am trying to load one dimension metadata from planning to oracle table.we are on 10.1.3
i selected LKM SQL to SQL to load from source to staging area and IKM SQL to SQL append to load from staging to Target.
I got the below error
0 : null : java.sql.SQLException: Driver must be specified
java.sql.SQLException: Driver must be specified
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.t(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Please suggest..
Thanks,

Hi John
Thank you for the response
i am trying to load accounts back to oracle table.
My plan is to load existing accounts in planning to a oracle table i.e PLANACNT,so when i load new accounts from oracle to planning through ODI , i can say in the source filter that load Table.column not in (select accounts from PLANACNT).
Please suggest if there is any better method for this...my plan is to load new accounts created in oracle to planning by comparing the accounts in planning.
Thanks,

How to load data from sysbase to oracle using sysbase odbc drivers??

Hi ,
I am trying to create an interface from sysbase to oracle, using LKM sql to orcle and IKM SQL control append, IKM SQL incremental append,CKM oracle . when we are running the interface we are getting below error
com.sunopsis.sql.SnpsMissingParametersException: Missing parameter: C1_WORKGROUP_ID
SQL: insert into ODIUSER.C$_0AGENTLOGINLOGOUT (      C1_WORKGROUP_ID,      C2_USER_ID,      C3_CREATEDT,      C4_UPDATEDT,      C5_REASONID,      C6_LOGOUTDT,      C7_LOGINDT,      C8_SERVICE_ID ) values (      :C1_WORKGROUP_ID,      :C2_USER_ID,      :C3_CREATEDT,      :C4_UPDATEDT,      :C5_REASONID,      :C6_LOGOUTDT,      :C7_LOGINDT,      :C8_SERVICE_ID )
     at com.sunopsis.sql.SnpsQuery.completeHostVariable(SnpsQuery.java:439)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java:1926)
     at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java:122)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3034)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java:729)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2815)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)

Hi all,
Can any one help me in doing interface from sysbase to oracle??

Hierachy Load error from R/3

Hi All,
I got an error while loading hierarchy from R/3 to BW. error is
Diagnosis
 The hierarchy level of the parent node must be one larger than the
 hierarchy level of the actual node. This is not the case for the node
 with ID 00092826 and its parent node with ID 00092827 .
System response
Procedure
 Correct the hierarchy level of the node or of the parent node in your
 source system.
Procedure for System Administration
Can anybody help how to solve this error and where to correct this hierarchy in R/3.
This is an urgent issue.all my dependant loads are stopped due to this error.
Thanks in advance
Narendra.

Hi,
Refer Note 339453
Is this is the first time ?
Thanks
Assign points if useful

Loading Error from CRM datasource - Info Idoc recieved with status 8

Hello All,
NEED YOUR HELP
We have a CRM datasource 0CRM_SALES_ACT_1 which works well from source in RSA3. The dataload is a full and fetches 19,000 records from CRM
However when we load it from an infopackage from BW it gives us the following "No data in source sysetm" Info Idoc with status 8. We have tried the following to eleminate some doubts
1) Checked the connection in SM59 using aleremote .Connection and authorization successful. Also loaded data in the BW system for other datasources from same CRM system it works well, so no authorization/ connections issues.
2) In the source system CRM tried transaction RSA3--> extract data get 19000 records
3) In the source system CRM Triied transaction RSA3--> Import Request from BW --> successful.
4) Checked the TRFC queue in SM58 the TRFC queue is empty
5) When we check the logs in CRM for ALEREMOTE we get the following message
synchronous transmission of info IDoc 2 in task 0001 (0 parallel tas
DATASOURCE = 0CRM_SALES_ACT_1
Current Values for Selected Profile Parameters
abap/heap_area_nondia......... 0
abap/heap_area_total.......... 9437184000
abap/heaplimit................ 40000000
zcsa/installed_languages...... ED
zcsa/system_language.......... E
ztta/max_memreq_MB............ 256
ztta/roll_area................ 3000000
ztta/roll_extension........... 2000000000
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 266228, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:38, End = 2008.10.22 14:18:38
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 266229, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:39, End = 2008.10.22 14:18:39
Job finished
*What is the issue ? Data is present and confirmed available in source system , yet we get 0 records in BW system ? WE NEED YOUR HELP *

Hi
May be you need to provide full authorizations to the user 'ALEREMOTE'.Ask your basis team to check the authorizations.
Regards,
Chandu.

Date load error From ODS to Cube?

Guru's,
Here is a status of data load and suggest me.
Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
point will be definitely awarded for the proper answers.
Thanks in advance.
vasu.

Hi Vasuvasu
Once the edit is done and reloade the sata it wont show u the records in Red..
Hope itz Helps..!
Regards
KISHORE M REDDY
**Winners Don't Do Different things,They Do things Differently...!**
> I dont whink this is with Disk space Y because after
> every full load we are deleting data.

How to load images from client to oracle server

Hi
I want to load the image in oracle. when i tried to laod the iamge from my client(windows) to oracle server(linux)
it is giving error. i wrotea pl/sql program to store the images in oracle database.
but the server not reconzing the path of image wich is client. how to overcome this probelm. as iam new to oracle
i dont know apex and DAD. can any help me with an example
thak you

In addition to Solomon, please read:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6894565006210, that explains (again) why servers can't see clients and points to an sqlldr example @ http://asktom.oracle.com/pls/asktom/f?p=100:11:2928066747837319::::P11_QUESTION_ID:624423639385

ORA-12154 Connection error from HFM to Oracle Database

Hi,
I am trying to configure Hyperion HFM but can write to HFM database.
The implementation architecture:
Hyperion 11.1.2.2 (with all the requiered patches for HFM, FDM, Shared Services, Workspace and Oracle Application Development)
Server 1:
Windows Server 2008 x64
Installed products: Foundation (EPMA, CalcManager), BI, HFM web components and ADM driver
Configured products: Foundation(EPMA, CalcManager), BI.
Database Client: 11gR2 x64
Server 2:
Windows Server 2008 x64
Installed products: HFM, FDQM
Configured Products: FDQM, HFM
Database Client: 11gR2 x32, 11gR2 x64 (x32 version installed first)
Server 3:
Database: Oracle 11.2.0.2
All the products from server 1 are working fine, FDQM (server 2) is also working fine, but, when I try to do any action related with HFM database the system fails.
I have tested the connection is these scenarios:
1. SQLdeveloper: successfull!, I can create tables, views, etc. Double checking the user privileges it has all the required.
2. tnsping: successfull!
3. HFMApplicationCopy utility: Successfull using UDL file and writing the connection parameters.
4. EPM System Configurator: the configurator successfully validates the database connection information, but does not create the tables on the database. No errors in the configtool log.
5. EPM Diagnostic Tool: fails with this error message:
------------STARTING VALIDATION SCRIPTS----------
LOGGING IN HFM....
CREATING APPLICATION....
ERROR: Unable to CreateApplicationCAS
Number (dec) : -2147215936
Number (hex) : &H800415C0
Description : <?xml version="1.0"?>
+<EStr><Ref>{DC34A1FD-EE02-4BA6-86C6-6AEB8EF5E5A3}</Ref><AppName/><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147467259</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>HfmADOConnection.cpp</File><Line>511</Line><Ver>11.1.2.2.300.3774</Ver><DStr>ORA-12154: TNS:could not resolve the connect identifier specified</DStr></ESec><ESec><Num>-2147215616</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxSQLConnectionPool.cpp</File><Line>585</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServerImpl.cpp</File><Line>8792</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServer.cpp</File><Line>90</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxClient.cpp</File><Line>1356</Line><Ver>11.1.2.2.300.3774</Ver><PSec><Param><server_name></Param></PSec></ESec><ESec><Num>-2147215936</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxClient.cpp</File><Line>936</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxClient.cpp</File><Line>4096</Line><Ver>11.1.2.2.300.3774</Ver></ESec></EStr>+
Source : Hyperion.HFMErrorHandler.1
ERROR: while Application created
7. HFM Classic application creation: fails with the following error:
Error*11*<user_name+>*10/19/2012 08:30:52*CHsxServer.cpp*Line 90*<?xml version="1.0"?>+
+<EStr><Ref>{DC34A1FD-EE02-4BA6-86C6-6AEB8EF5E5A3}</Ref><AppName/><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147467259</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>HfmADOConnection.cpp</File><Line>511</Line><Ver>11.1.2.2.300.3774</Ver><DStr>ORA-12154: TNS:could not resolve the connect identifier specified</DStr></ESec><ESec><Num>-2147215616</Num><Type>1</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxSQLConnectionPool.cpp</File><Line>585</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServerImpl.cpp</File><Line>8792</Line><Ver>11.1.2.2.300.3774</Ver></ESec><ESec><Num>-2147215936</Num><Type>0</Type><DTime>10/19/2012 8:30:52 AM</DTime><Svr><server_name></Svr><File>CHsxServer.cpp</File><Line>90</Line><Ver>11.1.2.2.300.3774</Ver></ESec></EStr>+
8. EPMA Application deployment: fails with same message.
Please help me with some insights on this problem, I have tried everything but nothing works.
Regards
Edited by: Otein on 19-oct-2012 14:04

Hi,
I Have solved one of my problems, the one that keep HFM from connecting to the Oracle database.
I just change the TNSNAMES.ORA, like this:
Initial tnsnames.ora
PRUEBA.WORLD=
+(DESCRIPTION_LIST =+
+(DESCRIPTION =+
+(LOAD_BALANACE = ON)+
+(FAILOVER = ON)+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = TCP)(HOST = <server_name>)(PORT = <port>))+
+)+
+(CONNECT_DATA =+
+(SERVICE_NAME = <service_name>)+
+)+
+)+
+)+
Modified tnsnames.ora
PRUEBA.WORLD=
+(DESCRIPTION =+
+(LOAD_BALANACE = ON)+
+(FAILOVER = ON)+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = TCP)(HOST = <server_name>)(PORT = <port>))+
+)+
+(CONNECT_DATA =+
+(SERVICE_NAME = <service_name>)+
+)+
+)+
I Just delete the line "+(DESCRIPTION_LIST =+" and its corresponding closing parenthesis, I did this cause in the configuration utility log I saw this line:
+TNS parsing: Entry: DESCRIPTION_LIST [[Address: Protocol:(TCP) Host:(<server_name>) Port:(1521) SID:(<service_name>)]]+
So, if the applications were trying to connect to connection descriptor DESCRIPTION_LIST, the driver could not recognize DESCRIPTION_LIST as a valid one.
There is a lot going on behind the scenes when you work with Oracle Database as the repository, maybe there is some other way to address this issue, but it worked for me, hope it can help you too.

Member load error from EIS

I'm loading data into essbase from eis. After member load following error is given
EssbaseAPI: You have been logged out due to inactivity or explicitly by the administrator.
When I try the same thing using user 'admin' it works fine. but the error is observed for other users.
Is there any setting for the user not getting logged out.

Could you explain how to solve this issue?
thanks in advance

" (quotes) is column values when loading data from csv to oracle table

I am loading a data from csv file to an oracle table.
After the data is loaded , lets suppose the value in one column is X.
when i write a query to fetch data like
select * from table where col='X' then it gives no output.
On investigating it was found that the value is stored in col as "X".
This also happens when i copy paste the value from column to some text editor ....
i want to remove these double quotes , and also want to know why these are coming...
Any suggestions guys ?
Thanks
Using Oracle 10g

These quotes are part of your data file. Most CSV-parsers remove those quotes.
If you are using an external table you can remove them by something like this for your access parameters
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
ACCESS PARAMETERS
    RECORDS DELIMITED BY NEWLINE
    FIELDS TERMINATED BY ','
    OPTIONALLY ENCLOSED BY '"'
But if you want to remove them from your existing data use this
update your_table
set col1 = trim( '"' from col1 )
Note that in some CSV-files wich use an enclosing character the enclosing character is itself is used as an escape character to use the enclosing character inside a field.
For example a field might be "Some text with ""this"" enclosed"
To correct these fields you might use another update
update your_table
set col1 = replace( col1, '""', '"' )

Load data from SAS to Oracle?

Hi, everybody,
i'm going to load some huge data from SAS format to Oracle database. I wonder which is the best way to do the task? Seems 'Import' is just for data generated via 'Export'. Will SLQ*Loader work for this prupose? If yes, what would be the procedures? And do I need to get some special drivers like ODBC etc. too? thanks ahead for any help!
Lauren

No special drivers needed, SQL*Loader is just what you need.
If you go to tahiti.oracle.com, Oracle's documentation index, and search on SQL*Loader, there will be reams on information about setting up the appropriate control file.
Justin

Load Error with return code 7000 when call sqlldr in interface.

Hi All,
I have created a interface to load data from 'File' to 'Oracle' in ODI 11g.
Below are the running order of this interface.
1 - Loading - SrcSet0 - Drop work view
2 - Loading - SrcSet0 - Drop Temp Table
3 - Loading - SrcSet0 - Create Temp table
4 - Loading - SrcSet0 - Create Work View
5 - Loading - SrcSet0 - Generate CTL file
6 - Loading - SrcSet0 - Call sqlldr
We are getting the following error while running the step 6.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 22, in <module>
Load Error: See C:\home\oracle\joc\odi/AIM.log for details
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
And it return code 7000 indicated in 'Execution Statistics'.
If anyone has encountered a similar issue and able to solve it, please share your thoughts with me.
Thanks in advance for your help.
Dicksam

This forum is dedicated to supporting the use of Maven with FMW and the new Oracle Maven Repository. Given that ODI does not currently provide Maven support, you are unlikely to get a response in this forum. You might want to try posting in a different forum dedicated to Data Integration, such as the Master Data Management forum.

Load error.Could not find the referenced object

Hi All,
When I open my created .jws file and complie the project, it gives the error
Load error.
Object:xxlc.oracle.apps.okc.articles.lists.server
Project:D:\JDevelop10g\jdevhome\jdev\myprojects\XXVariables.jpr
The following object(s) reffered to objects that could not be found:
xxlc.oracle.apps.okc.articles.lists.server.XXLCCreateListValueVO
Could not find the following referenced object(s):
xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVariableListValuesEO
All files are present in respective folders,then why this error is coming?
Please Help.
Thanks ,
SK

Click on XXVariables.jpr first, then File --> open locate the file and click OK.
Thanks
--Anil

Loading error from BI to Oracle

Similar Messages

Maybe you are looking for